Function Module to send emails to users

Hi,
Please help me in finding a FM that will allow me to send emails to users if a field in the internal table is blank.
Please suggest.
Thanks.

Hi
Use this
      call function 'SO_NEW_DOCUMENT_SEND_API1'
        EXPORTING
          document_data              = doc_data " Subject
          document_type              = 'RAW'
          put_in_outbox              = 'X'
          commit_work                = 'X'
        TABLES
          object_header              = obj_head " Header
          object_content             = obj_con[] " Body of mail
          receivers                  = rec " reciver
        EXCEPTIONS
          too_many_receivers         = 1
          document_not_sent          = 2
          document_type_not_exist    = 3
          operation_no_authorization = 4
          parameter_error            = 5
          x_error                    = 6
          enqueue_error              = 7
          others                     = 8.
rgds
Arun

Similar Messages

Function module for sending email

Hi all,
Can I know list of function modules for sending emails.
Other than "SO_DOCUMENT_SEND_API1"
pls let me know

Hi Praveen,
Below is the sample code to send the external mail.
&**********Reward Points if helpful**********&
DATA: ld_mtitle LIKE sodocchgi1-obj_descr,
        ld_format TYPE so_obj_tp ,
        ld_attdescription TYPE so_obj_nam ,
        ld_attfilename TYPE so_obj_des .
       ld_receiver LIKE sy-subrc.
DATA:   it_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
          it_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,
          it_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
          w_cnt TYPE i,
          w_sent_all(1) TYPE c,                             "#EC NEEDED
          w_doc_data LIKE sodocchgi1.
REFRESH it_receivers . CLEAR it_receivers .
IF v_trip_send = 'X'.
    it_receivers-receiver = it_trip_dload-approver_email .
ELSE .
    it_receivers-receiver = it_adv_dload-approver_email .
ENDIF.
it_receivers-rec_type = c_u .
APPEND it_receivers. CLEAR it_receivers.
it_receivers-receiver = " ------> pass your reciever email id.
IF v_trip_send = 'X' .
    it_receivers-receiver = it_trip_dload-requester_email .
ELSE .
    it_receivers-receiver = it_adv_dload-requester_email .
ENDIF .
it_receivers-rec_type = c_u .
it_receivers-copy     = 'X' .
APPEND it_receivers. CLEAR it_receivers.
ld_mtitle = p_mtitle.
ld_format              = p_format.
ld_attdescription      = p_attdescription.
ld_attfilename         = p_filename.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = c_saprpt.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
     ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name   = c_saprpt.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = c_f.
CLEAR it_attachment.
REFRESH it_attachment.
it_attachment[] = it_attach[].
Describe the body of the message
CLEAR it_packing_list.
REFRESH it_packing_list.
it_packing_list-transf_bin = space.
it_packing_list-head_start = 1.
it_packing_list-head_num = 0.
it_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES it_packing_list-body_num.
it_packing_list-doc_type = c_raw.
APPEND it_packing_list.
Create attachment notification
it_packing_list-transf_bin = c_x.
it_packing_list-head_start = 1.
it_packing_list-head_num   = 1.
it_packing_list-body_start = 1.
DESCRIBE TABLE it_attachment LINES it_packing_list-body_num.
it_packing_list-doc_type   = ld_format.
it_packing_list-obj_descr = ld_attdescription.
it_packing_list-obj_name   = ld_attfilename.
it_packing_list-doc_size   = it_packing_list-body_num * 255.
APPEND it_packing_list.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
    EXPORTING
      document_data = w_doc_data
      put_in_outbox = c_x
      commit_work   = c_x
    IMPORTING
      sent_to_all   = w_sent_all
    TABLES
      packing_list = it_packing_list
      contents_bin = it_attachment
      contents_txt = it_message
      receivers     = it_receivers.

Function Module to send email

Hi All,
Is there a Function Module in R/3 that can send external emails?
Thanks!
Roman D.

I usually use the following function module. I believe that it eventually calls the function module mentioned in the previous post. Here is a sample program.
report zrich_0003 .
data: maildata type sodocchgi1.
data: mailtxt type table of solisti1 with header line.
data: mailrec type table of somlrec90 with header line.
start-of-selection.
clear:    maildata, mailtxt, mailrec.
refresh: mailtxt, mailrec.
maildata-obj_name = 'TEST'.
maildata-obj_descr = 'Test'.
maildata-obj_langu = sy-langu.
mailtxt-line = 'This is a test'.
append mailtxt.
mailrec-receiver = '[email protected]'.
mailrec-rec_type = 'U'.
append mailrec.
call function 'SO_NEW_DOCUMENT_SEND_API1'
       exporting
            document_data              = maildata
            document_type              = 'RAW'
            put_in_outbox              = 'X'
       tables
            object_header              = mailtxt
            object_content             = mailtxt
            receivers                  = mailrec
       exceptions
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            others                     = 8.
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Regards,
Rich Heilman

Function Module for send email

hi experts,
My aim to send message as email not any attachment
what is the function module i need to use for sending mail from program?
how to use the function module ? give some sample code and explain.
please help me regarding this.
thanks,
nagarjuna.

Hi
i am sending a sample program.
REPORT ZMAIL.
TABLES: ekko.
PARAMETERS: p_email TYPE somlreci1-receiver .
TYPES: BEGIN OF t_ekpo,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
END OF t_ekpo.
DATA: it_ekpo TYPE STANDARD TABLE OF t_ekpo INITIAL SIZE 0,
wa_ekpo TYPE t_ekpo.
TYPES: BEGIN OF t_charekpo,
ebeln(10) TYPE c,
ebelp(5) TYPE c,
aedat(8) TYPE c,
matnr(18) TYPE c,
END OF t_charekpo.
DATA: wa_charekpo TYPE t_charekpo.
DATA: it_message TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
WITH HEADER LINE.
DATA: it_attach TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
WITH HEADER LINE.
DATA: t_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
t_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
t_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_object_header LIKE solisti1 OCCURS 0 WITH HEADER LINE,
w_cnt TYPE i,
w_sent_all(1) TYPE c,
w_doc_data LIKE sodocchgi1,
gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
*START_OF_SELECTION
START-OF-SELECTION.
Retrieve sample data from table ekpo
PERFORM data_retrieval.
Populate table with detaisl to be entered into .xls file
PERFORM build_xls_data_table.
*END-OF-SELECTION
END-OF-SELECTION.
Populate message body text
perform populate_email_message_body.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
tables it_message
it_attach
using p_email
'Example .xls documnet attachment'
'XLS'
'filename'
changing gd_error
gd_reciever.
Instructs mail send program for SAPCONNECT to send email(rsconn01)
PERFORM initiate_mail_execute_program.
*& Form DATA_RETRIEVAL
Retrieve data form EKPO table and populate itab it_ekko
FORM data_retrieval.
SELECT ebeln ebelp aedat matnr
UP TO 10 ROWS
FROM ekpo
INTO TABLE it_ekpo.
ENDFORM. " DATA_RETRIEVAL
*& Form BUILD_XLS_DATA_TABLE
Build data table for .xls document
FORM build_xls_data_table.
data: ld_store(50) type c. "Leading zeros
CONSTANTS: con_cret(5) TYPE c VALUE '0D', "OK for non Unicode
con_tab(5) TYPE c VALUE '09'. "OK for non Unicode
CONCATENATE 'EBELN' 'EBELP' 'AEDAT' 'MATNR' INTO it_attach SEPARATED
BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
LOOP AT it_ekpo INTO wa_charekpo.
concatenate '=REPLACE("' wa_charekpo-ebelp '",1,5,"'
wa_charekpo-ebelp '")' into ld_store .
CONCATENATE wa_charekpo-ebeln ld_store wa_charekpo-aedat
wa_charekpo-matnr INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
ENDLOOP.
ENDFORM. " BUILD_XLS_DATA_TABLE
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
Send email
FORM send_file_as_email_attachment tables pit_message
pit_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver,
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ,
ld_receiver LIKE sy-subrc.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = pit_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
*CALL FUNCTION 'SO_DOCUMENT_SEND_API1
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
Instructs mail send program for SAPCONNECT to send email.
FORM initiate_mail_execute_program.
WAIT UP TO 2 SECONDS.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
ENDFORM. " INITIATE_MAIL_EXECUTE_PROGRAM
*& Form POPULATE_EMAIL_MESSAGE_BODY
Populate message body text
form populate_email_message_body.
REFRESH it_message.
it_message = 'Please find attached a list test ekpo records'.
APPEND it_message.
endform. " POPULATE_EMAIL_MESSAGE_BODY

Design a function module to send email

hii gurus ,
             i have to design a function module which takes three input email id (reciever),   body (text of message) , and header ie subject and when executed should send email to the reciever. pls help
Aditya Shrivastava.

Hi Aditya,
If you could not get your problem solved with predefined FMs, Try making this FM.. it will help you..as this FM is made in our server locally..
name :   z938_mailsend
import parameters
param name      type     associated type           shrt text
I_TID           LIKE      THEAD-TDID                        Text ID of text to be read
I_LAN           LIKE     THEAD-TDSPRAS                        Language of text to be read
I_L_NAME     LIKE     THEAD-TDNAME                        Name of text to be read
I_OID          LIKE     THEAD-TDOBJECT                        Object of text to be read
W_RETURN     TYPE     SSFCRESCL                        Smart Forms: Return value at end of form printing
I_POTITLE     TYPE     EBELN                               purchase order number
W_DOC_CHNG     TYPE     SODOCCHGI1                       data of an object which can be changed
I_ADDRNUM     LIKE     ADR6-ADDRNUMBER               Address number of Vendor
source code :
FUNCTION z938_mailsend.
""Local Interface:
*" IMPORTING
*"     REFERENCE(I_TID) LIKE THEAD-TDID
*"     REFERENCE(I_LAN) LIKE THEAD-TDSPRAS
*"     REFERENCE(I_L_NAME) LIKE THEAD-TDNAME
*"     REFERENCE(I_OID) LIKE THEAD-TDOBJECT
*"     REFERENCE(W_RETURN) TYPE SSFCRESCL
*"     REFERENCE(I_POTITLE) TYPE EBELN
*"     REFERENCE(W_DOC_CHNG) TYPE SODOCCHGI1
*"     REFERENCE(I_ADDRNUM) LIKE ADR6-ADDRNUMBER
*data declaration
*Internal Table declaration
DATA : it_otf     TYPE STANDARD TABLE OF itcoo ,
         it_tline   TYPE STANDARD TABLE OF tline ,
         it_record TYPE STANDARD TABLE OF solisti1,
         it_objpack TYPE STANDARD TABLE OF sopcklsti1,
         it_objtxt TYPE STANDARD TABLE OF solisti1 ,
         it_objbin TYPE STANDARD TABLE OF solisti1 ,
         it_reclist TYPE STANDARD TABLE OF somlreci1 ,
         it_tdline TYPE STANDARD TABLE OF tline,
*Work Area declarations
         wa_objhead     TYPE soli_tab,
         wa_buffer      TYPE string,       "To convert from 132 to 255
         wa_it_objtxt   TYPE solisti1,
         wa_it_objpack TYPE sopcklsti1,
         wa_it_record   TYPE solisti1,
         wa_it_reclist TYPE somlreci1,
         wa_it_tline    TYPE tline,
         wa_tdline      TYPE tline,
*variable declaration
         v_lines_bin    TYPE i,
         v_lines_txt    TYPE i,
         v_len_in       TYPE sood-objlen,         "#EC NEEDED
         v_mailaddr     TYPE adr6-smtp_addr.
*constant declaration
CONSTANTS : c_msgtype TYPE c VALUE 'E',    " for declaring masseage type as error msg
              c_X TYPE c VALUE 'X',
              c_U TYPE c VALUE 'U'.
it_otf[] = w_return-otfdata[].
*calling function module to convert otf format of smartform to pdf format
CALL FUNCTION 'CONVERT_OTF'
   EXPORTING
     format                      = text-001     "PDF
     max_linewidth               = 132
    ARCHIVE_INDEX              =
    COPYNUMBER                 =
    ASCII_BIDI_VIS2LOG         =
    PDF_DELETE_OTFTAB          =
   IMPORTING
     bin_filesize                = v_len_in
    BIN_FILE                   =
    TABLES
      otf                        = it_otf
      lines                      = it_tline
   EXCEPTIONS
     err_max_linewidth           = 1
     err_format                  = 2
     err_conv_not_possible       = 3
     err_bad_otf                 = 4
     OTHERS                      = 5 .
IF sy-subrc NE 0.
    sy-msgid = text-002.     "some msg
    sy-msgty = c_msgtype.    " E
    sy-msgno = 040.
    sy-msgv1 = ' '.
    sy-msgv2 = ' '.
    sy-msgv3 = ' '.
    sy-msgv4 = ' '.
    EXIT.
ELSE.
Convert PDF from 132 to 255.
    LOOP AT it_tline INTO wa_it_tline.
      TRANSLATE wa_it_tline USING ' ~'.      " Replacing space by ~
      CONCATENATE wa_buffer wa_it_tline INTO wa_buffer.
    ENDLOOP.
    TRANSLATE wa_buffer USING '~ '.         " Replacing space by ~
    DO.
      wa_it_record = wa_buffer.
      APPEND wa_it_record TO it_record.     " Appending 255 characters as a record
      SHIFT wa_buffer LEFT BY 255 PLACES.
      IF wa_buffer IS INITIAL.
        EXIT.
      ENDIF.
    ENDDO.
    REFRESH:it_objbin.
    CLEAR wa_objhead.
Object with PDF.
    it_objbin[] = it_record[].
    DESCRIBE TABLE it_objbin LINES v_lines_bin.
*calling a function module read_text to get the text for the mail body
    CALL FUNCTION 'READ_TEXT'
     EXPORTING
        id                            = i_tid
        language                      = i_lan
        name                          = i_l_name
        object                        = i_oid
    IMPORTING
    HEADER                          =
     TABLES
        lines                         = it_tdline
     EXCEPTIONS
       id                             = 1
       language                       = 2
       name                           = 3
       not_found                      = 4
       object                         = 5
       reference_check                = 6
       wrong_access_to_archive        = 7
     OTHERS                           = 8
    IF sy-subrc <> 0.    "#EC
    ENDIF.
    IF it_tdline IS NOT INITIAL.
      LOOP AT it_tdline INTO wa_tdline.
        wa_it_objtxt = wa_tdline-tdline.
        APPEND wa_it_objtxt TO it_objtxt.
        CLEAR: wa_tdline,
               wa_it_objtxt.
      ENDLOOP.
      DESCRIBE TABLE it_objtxt LINES v_lines_txt.
    ENDIF.
Pack to main body as RAW.
    CLEAR wa_it_objpack-transf_bin.        "Obj. to be transported not in binary form
    wa_it_objpack-head_start = 1.          "Start line of object header in transport packet
    wa_it_objpack-head_num = 0.            "Number of lines of an object header in object packet
    wa_it_objpack-body_start = 1.          "Start line of object contents in an object packet
    wa_it_objpack-body_num = v_lines_txt. "Number of lines of the object contents in an object packet
Code for document class
    wa_it_objpack-doc_type = text-004.        "RAW
    APPEND wa_it_objpack TO it_objpack.
Packing as PDF.
    wa_it_objpack-transf_bin = c_X.           " X
    wa_it_objpack-head_start = 1.
    wa_it_objpack-head_num = 1.
    wa_it_objpack-body_start = 1.
    wa_it_objpack-body_num = v_lines_bin.
    wa_it_objpack-doc_type = text-001.        "PDF
    wa_it_objpack-obj_name = text-006.        "SmartForm
    CONCATENATE i_potitle '.pdf' INTO wa_it_objpack-obj_descr.
    wa_it_objpack-doc_size = v_lines_bin * 255.
    APPEND wa_it_objpack TO it_objpack.
Document information.
    CLEAR wa_it_reclist.
e-mail receivers.
    SELECT SINGLE smtp_addr FROM adr6 INTO v_mailaddr    "#EC *
     WHERE addrnumber = i_addrnum.
    wa_it_reclist-receiver = v_mailaddr.
    wa_it_reclist-express = c_X.                        " X
    wa_it_reclist-rec_type = c_U.                       "U -> Internet address
    APPEND wa_it_reclist TO it_reclist.
Sending Mail
    CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
     EXPORTING
      document_data                  = w_doc_chng
      put_in_outbox                  = c_X            "X
    COMMIT_WORK                    =
   IMPORTING
    SENT_TO_ALL                    =
    NEW_OBJECT_ID                  =
     TABLES
      packing_list                   = it_objpack
      object_header                  = wa_objhead
      contents_bin                   = it_objbin
      contents_txt                   = it_objtxt
    CONTENTS_HEX                   =
    OBJECT_PARA                    =
    OBJECT_PARB                    =
        receivers                    = it_reclist
     EXCEPTIONS
       too_many_receivers            = 1
       document_not_sent             = 2
       document_type_not_exist       = 3
       operation_no_authorization    = 4
       parameter_error               = 5
       x_error                       = 6
       enqueue_error                 = 7
       OTHERS                        = 8 .
    IF sy-subrc <> 0.
      sy-msgid = text-008.      "some msg
      sy-msgty = c_msgtype.     " E
      sy-msgno = 041.
      sy-msgv1 = ' '.
      sy-msgv2 = ' '.
      sy-msgv3 = ' '.
      sy-msgv4 = ' '.
      EXIT.
    ENDIF.
ENDIF.
ENDFUNCTION.
Regards,,
Nikita

Help in Function Module for Sending Email to Supplier afetr Registration

Hi Team
I am beginner in ABAP, need your help in finding solution for the below issue.The Scenario is between MDM to SRM(R/3 System)
External supplier when registers, system need to generate a unique identification number ( Registration Number / Profile Number ) for the supplier and also generate a PIN ( password ) for the Registration Number, so that users from supplier company can request a user id to be created.These user idu2019s will be then linked to the supplier profile using the registration number.Also, supplier needs to be communicated with the Registration and PIN number via email.
FOr the email we are using the FM"ZGVMP_SUPPLIER_REGISTRATION".
My query is when the supplier is receiving the email , he is getting the email from the name GVMPUIDC(i.e the system id, it is being sent by the syetm id or user id of the program).
I want the mail to be sent by the following name to the supplier by different name instead of GVMPUIDC.
please help in solving the problem
Thanks
Edited by: VArjun86 on Dec 5, 2011 11:12 AM

Hi Kesshav
The FM which i am using is zgvmp_supplier_registration..
Below is the code which is being used to send the emails.
Send emails to Registration from Suppliers only
    if not wa_contact-name1 is initial and
       not wa_contact-name2 is initial.
      if sy-sysid = 'NSP'.
        perform send_email.
      else.
        perform send_html_email.
      endif.
    endif.
please let me know if you require any more details

Is there a Function module to send email ?

Hi all,
is there a FM that can be used to send E mails?
i found so_document_send_api on the SDN, but it doesnt exist.
any pointers?
Thanks,
Sonal

Hi Sonal,
http://www.sap-img.com/fu016.htm
SO_DOCUMENT_SEND_API1
SO_NEW_DOCUMENT_ATT_SEND_API1
How to send a report to an external mail-id?
REPORT ZREPORT_TO_EMAIL NO STANDARD PAGE HEADING LINE-SIZE 200.
DATA : BEGIN OF ITAB OCCURS 0,
PERNR LIKE PA0001-PERNR,
ENAME LIKE PA0001-ENAME,
END OF ITAB.
DATA: message_content LIKE soli OCCURS 10 WITH HEADER LINE,
receiver_list LIKE soos1 OCCURS 5 WITH HEADER LINE,
packing_list LIKE soxpl OCCURS 2 WITH HEADER LINE,
listobject LIKE abaplist OCCURS 10,
compressed_attachment LIKE soli OCCURS 100 WITH HEADER LINE,
w_object_hd_change LIKE sood1,
compressed_size LIKE sy-index.
START-OF-SELECTION.
SELECT PERNR ENAME
INTO CORRESPONDING FIELDS OF TABLE ITAB
FROM PA0001
WHERE PERNR < 50.
LOOP AT ITAB.
WRITE :/02 SY-VLINE , ITAB-PERNR, 15 SY-VLINE , ITAB-ENAME, 50
SY-VLINE.
ENDLOOP.
Receivers
receiver_list-recextnam = '[email protected]'. "-->
EMAIL ADDRESS
RECEIVER_list-RECESC = 'E'. "<-
RECEIVER_list-SNDART = 'INT'."<-
RECEIVER_list-SNDPRI = '1'."<-
APPEND receiver_list.
General data
w_object_hd_change-objla = sy-langu.
w_object_hd_change-objnam = 'Object name'.
w_object_hd_change-objsns = 'P'.
Mail subject
w_object_hd_change-objdes = 'Message subject'.
Mail body
APPEND 'Message content' TO message_content.
Attachment
CALL FUNCTION 'SAVE_LIST'
EXPORTING
list_index = '0'
TABLES
listobject = listobject.
CALL FUNCTION 'TABLE_COMPRESS'
IMPORTING
compressed_size = compressed_size
TABLES
in = listobject
out = compressed_attachment.
DESCRIBE TABLE compressed_attachment.
CLEAR packing_list.
packing_list-transf_bin = 'X'.
packing_list-head_start = 0.
packing_list-head_num = 0.
packing_list-body_start = 1.
packing_list-body_num = sy-tfill.
packing_list-objtp = 'ALI'.
packing_list-objnam = 'Object name'.
packing_list-objdes = 'Attachment description'.
packing_list-objlen = compressed_size.
APPEND packing_list.
CALL FUNCTION 'SO_OBJECT_SEND'
EXPORTING
object_hd_change = w_object_hd_change
object_type = 'RAW'
owner = sy-uname
TABLES
objcont = message_content
receivers = receiver_list
packing_list = packing_list
att_cont = compressed_attachment.
http://www.sap-img.com/abap/sending-mail-with-attachment-report-in-background.htm
Here is the sample code:
z_send_email_fax_global
FUNCTION-POOL z_gfaian_mail_fax.            "MESSAGE-ID ..
WORK TABLE AREAS
TABLES: tsp01.
INTERNAL TABLES
DATA: lt_rec_tab LIKE STANDARD TABLE OF soos1 WITH HEADER LINE,
      lt_note_text   LIKE STANDARD TABLE OF soli WITH HEADER LINE,
      lt_attachments LIKE STANDARD TABLE OF sood5 WITH HEADER LINE.
DATA: lt_objcont LIKE STANDARD TABLE OF soli WITH HEADER LINE,
      lt_objhead LIKE STANDARD TABLE OF soli WITH HEADER LINE.
DATA: pdf_format LIKE STANDARD TABLE OF tline WITH HEADER LINE.
TYPES: BEGIN OF y_files,
       file(60) TYPE c,
       END OF y_files.
DATA: lt_files TYPE STANDARD TABLE OF y_files WITH HEADER LINE.
DATA: l_objcont     LIKE soli OCCURS 0 WITH HEADER LINE.
DATA: l_objhead     LIKE soli OCCURS 0 WITH HEADER LINE.
STRUCTURES
DATA: folder_id      LIKE soodk,
      object_id      LIKE soodk,
      link_folder_id LIKE soodk,
      g_document     LIKE sood4,
     g_header_data LIKE sood2,
      g_folmem_data LIKE sofm2,
      g_header_data LIKE sood2,
      g_receive_data LIKE soos6,
      g_ref_document LIKE sood4,
      g_new_parent   LIKE soodk,
      l_folder_id    LIKE sofdk,
      v_email(50).
DATA: hd_dat like sood1.
VARIABLES
DATA: client LIKE tst01-dclient,
      name    LIKE tst01-dname,
      objtype LIKE rststype-type,
      type    LIKE rststype-type.
DATA: numbytes TYPE i,
      arc_idx LIKE toa_dara,
      pdfspoolid LIKE tsp01-rqident,
      jobname LIKE tbtcjob-jobname,
      jobcount LIKE tbtcjob-jobcount,
      is_otf.
DATA: outbox_flag LIKE sonv-flag VALUE 'X',
      store_flag LIKE sonv-flag,
      delete_flag LIKE sonv-flag,
      owner       LIKE soud-usrnam,
      on          LIKE sonv-flag VALUE 'X',
      sent_to_all LIKE sonv-flag,
      g_authority LIKE sofa-usracc,
      w_objdes    LIKE sood4-objdes.
DATA: c_file LIKE rlgrap-filename,
      n_spool(6) TYPE n.
DATA: cancel.
DATA: desired_type LIKE sood-objtp,
      real_type LIKE sood-objtp,
      attach_type LIKE sood-objtp,
      otf LIKE sood-objtp VALUE 'OTF', " SAPscript Ausgabeformat
      ali LIKE sood-objtp VALUE 'ALI'. " ABAP lists
CONSTANTS
CONSTANTS: ou_fol LIKE sofh-folrg              VALUE 'O',
           c_objtp    LIKE g_document-objtp    VALUE 'RAW',
           c_file_ext LIKE g_document-file_ext VALUE 'TXT'.
=================================================================================
z_send_email_fax2
FUNCTION z_faian_mail_fax2.
""Interface local:
*" IMPORTING
*"     REFERENCE(SRC_SPOOLID) LIKE TSP01-RQIDENT
*"     REFERENCE(FAX_MAIL_NUMBER) TYPE SO_NAME
*"     REFERENCE(HEADER_MAIL) TYPE SO_OBJ_DES
*"     REFERENCE(OBJECT_TYPE) TYPE SO_ESCAPE
*" TABLES
*"      LT_BODY_EMAIL STRUCTURE SOLI
*" EXCEPTIONS
*"      ERR_NO_ABAP_SPOOLJOB
Fist part: Verify if the spool really exists
SELECT SINGLE * FROM tsp01 WHERE rqident = src_spoolid.
IF sy-subrc NE 0.
    RAISE err_no_abap_spooljob. "doesn't exist
ELSE.
    client = tsp01-rqclient.
    name   = tsp01-rqo1name.
    CALL FUNCTION 'RSTS_GET_ATTRIBUTES'
         EXPORTING
              authority     = 'SP01'
              client        = client
              name          = name
              part          = 1
         IMPORTING
              type          = type
              objtype       = objtype
         EXCEPTIONS
              fb_error      = 1
              fb_rsts_other = 2
              no_object     = 3
              no_permission = 4
              OTHERS        = 5.
    IF objtype(3) = 'OTF'.
      desired_type = otf.
    ELSE.
      desired_type = ali.
    ENDIF.
    CALL FUNCTION 'RSPO_RETURN_SPOOLJOB'
         EXPORTING
              rqident              = src_spoolid
              desired_type         = desired_type
         IMPORTING
              real_type            = real_type
         TABLES
              buffer               = l_objcont
         EXCEPTIONS
              no_such_job          = 14
              type_no_match        = 94
              job_contains_no_data = 54
              no_permission        = 21
              can_not_access       = 21
              read_error           = 54.
    IF sy-subrc EQ 0.
      attach_type = real_type.
    ENDIF.
    CALL FUNCTION 'SO_FOLDER_ROOT_ID_GET'
         EXPORTING
              owner     = sy-uname
              region    = ou_fol
         IMPORTING
              folder_id = l_folder_id
         EXCEPTIONS
              OTHERS    = 5.
fill out informations about the header of the email
    CLEAR: g_document.
    g_document-foltp     = l_folder_id-foltp.
    g_document-folyr     = l_folder_id-folyr.
    g_document-folno     = l_folder_id-folno.
    g_document-objtp     = c_objtp.
    g_document-objdes    = header_mail.
    g_document-file_ext = c_file_ext.
    g_header_data-objdes    = header_mail.
    CALL FUNCTION 'SO_DOCUMENT_REPOSITORY_MANAGER'
         EXPORTING
              method      = 'SAVE'
              office_user = sy-uname
         IMPORTING
              authority   = g_authority
         TABLES
              objcont     = lt_body_email
              attachments = lt_attachments
         CHANGING
              document    = g_document
              header_data = g_header_data
         EXCEPTIONS
              OTHERS      = 1.
    folder_id-objtp = l_folder_id-foltp.
    folder_id-objyr = l_folder_id-folyr.
    folder_id-objno = l_folder_id-folno.
    object_id-objtp = c_objtp.
    object_id-objyr = g_document-objyr.
    object_id-objno = g_document-objno.
    link_folder_id-objtp = l_folder_id-foltp.
    link_folder_id-objyr = l_folder_id-folyr.
    link_folder_id-objno = l_folder_id-folno.
    REFRESH lt_rec_tab.
   CLEAR lt_rec_tab.
   lt_rec_tab-sel        = 'X'.
   lt_rec_tab-recesc     = object_type.   "This field for FAX/MAIL
   lt_rec_tab-recnam     = 'U-'.
   lt_rec_tab-deliver    = 'X'.
   lt_rec_tab-not_deli   = 'X'.
   lt_rec_tab-read       = 'X'.
   lt_rec_tab-mailstatus = 'E'.
   lt_rec_tab-adr_name   = fax_mail_number.
   lt_rec_tab-sortfield = fax_mail_number.
   lt_rec_tab-recextnam = fax_mail_number.
   lt_rec_tab-sortclass = '5'.
   APPEND lt_rec_tab.
      lt_rec_tab-recextnam = fax_mail_number.
      lt_rec_tab-recesc = object_type.
      lt_rec_tab-sndart = 'INT'.
      lt_rec_tab-sndpri = 1.
      APPEND lt_rec_tab.
    lt_files-file = c_file.
    APPEND lt_files.
begin of insertion by faianf01
    hd_dat-objdes = header_mail.
    CALL FUNCTION 'SO_ATTACHMENT_INSERT'
         EXPORTING
              object_id                  = object_id
              attach_type                = attach_type
              object_hd_change           = hd_dat
              owner                      = sy-uname
         TABLES
              objcont                    = l_objcont
              objhead                    = l_objhead
         EXCEPTIONS
              active_user_not_exist      = 35
              communication_failure      = 71
              object_type_not_exist      = 17
              operation_no_authorization = 21
              owner_not_exist            = 22
              parameter_error            = 23
              substitute_not_active      = 31
              substitute_not_defined     = 32
              system_failure             = 72
              x_error                    = 1000.
    IF sy-subrc > 0.
    ENDIF.
end of insertion by faianf01
send email from SAPOFFICE
    CALL FUNCTION 'SO_OBJECT_SEND'
         EXPORTING
              folder_id                  = folder_id
              object_id                  = object_id
              outbox_flag                = outbox_flag
              link_folder_id             = link_folder_id
              owner                      = sy-uname
             check_send_authority       = 'X'
         TABLES
              receivers                  = lt_rec_tab
             note_text                  = lt_note_text
         EXCEPTIONS
              active_user_not_exist      = 35
              communication_failure      = 71
              component_not_available    = 1
              folder_no_authorization    = 5
              folder_not_exist           = 6
              forwarder_not_exist        = 8
              object_no_authorization    = 13
              object_not_exist           = 14
              object_not_sent            = 15
              operation_no_authorization = 21
              owner_not_exist            = 22
              parameter_error            = 23
              substitute_not_active      = 31
              substitute_not_defined     = 32
              system_failure             = 72
              too_much_receivers         = 73
              user_not_exist             = 35.
ENDIF.
ENDFUNCTION.
=================================================================================
z_send_email_fax
FUNCTION ZCBFS_SEND_MAIL.
""Interface local:
*" IMPORTING
*"     REFERENCE(SRC_SPOOLID) LIKE TSP01-RQIDENT
*"     REFERENCE(HEADER_MAIL) TYPE SO_OBJ_DES
*" TABLES
*"      LIST_FAX_MAIL_NUMBER STRUCTURE SOLI
*" EXCEPTIONS
*"      ERR_NO_ABAP_SPOOLJOB
DATA: vg_achou(1) TYPE n.
Fist part: Verify if the spool really exists
vg_achou = 1.
DO 60 TIMES.
    SELECT SINGLE * FROM tsp01 WHERE rqident = src_spoolid.
    IF sy-subrc IS INITIAL.
      CLEAR vg_achou.
      EXIT.
    ELSE.
      WAIT UP TO 1 SECONDS.
    ENDIF.
ENDDO.
IF vg_achou = 1.
    RAISE err_no_abap_spooljob. "doesn't exist
ENDIF.
client = tsp01-rqclient.
name   = tsp01-rqo1name.
CALL FUNCTION 'RSTS_GET_ATTRIBUTES'
       EXPORTING
            authority     = 'SP01'
            client        = client
            name          = name
            part          = 1
       IMPORTING
            type          = type
            objtype       = objtype
       EXCEPTIONS
            fb_error      = 1
            fb_rsts_other = 2
            no_object     = 3
            no_permission = 4
            OTHERS        = 5.
IF objtype(3) = 'OTF'.
    desired_type = otf.
ELSE.
    desired_type = ali.
ENDIF.
CALL FUNCTION 'RSPO_RETURN_SPOOLJOB'
       EXPORTING
            rqident              = src_spoolid
            desired_type         = desired_type
       IMPORTING
            real_type            = real_type
       TABLES
            buffer               = l_objcont
       EXCEPTIONS
            no_such_job          = 14
            type_no_match        = 94
            job_contains_no_data = 54
            no_permission        = 21
            can_not_access       = 21
            read_error           = 54.
IF sy-subrc EQ 0.
    attach_type = real_type.
ENDIF.
CALL FUNCTION 'SO_FOLDER_ROOT_ID_GET'
       EXPORTING
            owner     = sy-uname
            region    = ou_fol
       IMPORTING
            folder_id = l_folder_id
       EXCEPTIONS
            OTHERS    = 5.
fill out informations about the header of the email
CLEAR: g_document.
g_document-foltp     = l_folder_id-foltp.
g_document-folyr     = l_folder_id-folyr.
g_document-folno     = l_folder_id-folno.
g_document-objtp     = c_objtp.
g_document-objdes    = header_mail.
g_document-file_ext = c_file_ext.
g_header_data-objdes    = header_mail.
CALL FUNCTION 'SO_DOCUMENT_REPOSITORY_MANAGER'
       EXPORTING
            method      = 'SAVE'
            office_user = sy-uname
       IMPORTING
            authority   = g_authority
       TABLES
            attachments = lt_attachments
       CHANGING
            document    = g_document
            header_data = g_header_data
       EXCEPTIONS
            OTHERS      = 1.
folder_id-objtp = l_folder_id-foltp.
folder_id-objyr = l_folder_id-folyr.
folder_id-objno = l_folder_id-folno.
object_id-objtp = c_objtp.
object_id-objyr = g_document-objyr.
object_id-objno = g_document-objno.
link_folder_id-objtp = l_folder_id-foltp.
link_folder_id-objyr = l_folder_id-folyr.
link_folder_id-objno = l_folder_id-folno.
REFRESH lt_rec_tab.
LOOP AT LIST_FAX_MAIL_NUMBER.
    lt_rec_tab-recextnam = LIST_FAX_MAIL_NUMBER-LINE.
    lt_rec_tab-recesc = 'U'.
    lt_rec_tab-sndart = 'INT'.
    lt_rec_tab-sndpri = 1.
    APPEND lt_rec_tab.
ENDLOOP.
lt_files-file = c_file.
APPEND lt_files.
hd_dat-objdes = header_mail.
CALL FUNCTION 'SO_ATTACHMENT_INSERT'
       EXPORTING
            object_id                  = object_id
            attach_type                = attach_type
            object_hd_change           = hd_dat
            owner                      = sy-uname
       TABLES
            objcont                    = l_objcont
            objhead                    = l_objhead
       EXCEPTIONS
            active_user_not_exist      = 35
            communication_failure      = 71
            object_type_not_exist      = 17
            operation_no_authorization = 21
            owner_not_exist            = 22
            parameter_error            = 23
            substitute_not_active      = 31
            substitute_not_defined     = 32
            system_failure             = 72
            x_error                    = 1000.
IF sy-subrc > 0.
ENDIF.
send email from SAPOFFICE
CALL FUNCTION 'SO_OBJECT_SEND'
       EXPORTING
            folder_id                  = folder_id
            object_id                  = object_id
            outbox_flag                = outbox_flag
            link_folder_id             = link_folder_id
            owner                      = sy-uname
       TABLES
            receivers                  = lt_rec_tab
            note_text                  = lt_note_text
       EXCEPTIONS
            active_user_not_exist      = 35
            communication_failure      = 71
            component_not_available    = 1
            folder_no_authorization    = 5
            folder_not_exist           = 6
            forwarder_not_exist        = 8
            object_no_authorization    = 13
            object_not_exist           = 14
            object_not_sent            = 15
            operation_no_authorization = 21
            owner_not_exist            = 22
            parameter_error            = 23
            substitute_not_active      = 31
            substitute_not_defined     = 32
            system_failure             = 72
            too_much_receivers         = 73
            user_not_exist             = 35.
ENDFUNCTION.
Regards,
Srilatha.

Function module to send mail from SAP

Can any one please tell the Function module to send mail from SAP. The scenario is like this,I have a file in local system that i have to send to a particular mail address like [email protected] through a report program.

Hi shafiq,
1. There is some trick involved
in the binary files.
2. I have made a program (and it works fantastic)
ONLY 6 LINES FOR EMAILING
BELIEVE ME
ITS A FANTASTIC PROGRAM.
IT WILL WORK LIKE OUTLOOK EXPRESS !
3. The user is provided with
a) file name
b) email address to send mail
and it sends ANY FILE (.xls,.pdf .xyz..)
Instantaneously !
4. Make two things first :
1. Include with the name : ZAMI_INCLFOR_MAIL
2. Report with the name : ZAM_TEMP147 (any name will do)
3. Activate both and execute (2)
4. After providing filename, email adress
5. Code for Include :
10.08.2005 Amit M - Created
Include For Mail (First Req F16)
Modification Log
Data
DATA: docdata LIKE sodocchgi1,
objpack LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE,
objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objhex LIKE solix OCCURS 10 WITH HEADER LINE,
reclist LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
DATA: tab_lines TYPE i,
doc_size TYPE i,
att_type LIKE soodk-objtp.
DATA: listobject LIKE abaplist OCCURS 1 WITH HEADER LINE.
FORM
FORM ml_customize USING objname objdesc.
Clear Variables
CLEAR docdata.
REFRESH objpack.
CLEAR objpack.
REFRESH objhead.
REFRESH objtxt.
CLEAR objtxt.
REFRESH objbin.
CLEAR objbin.
REFRESH objhex.
CLEAR objhex.
REFRESH reclist.
CLEAR reclist.
REFRESH listobject.
CLEAR listobject.
CLEAR tab_lines.
CLEAR doc_size.
CLEAR att_type.
Set Variables
docdata-obj_name = objname.
docdata-obj_descr = objdesc.
ENDFORM. "ml_customize
FORM
FORM ml_addrecp USING preceiver prec_type.
CLEAR reclist.
reclist-receiver = preceiver.
reclist-rec_type = prec_type.
APPEND reclist.
ENDFORM. "ml_customize
FORM
FORM ml_addtxt USING ptxt.
CLEAR objtxt.
objtxt = ptxt.
APPEND objtxt.
ENDFORM. "ml_customize
FORM
FORM ml_prepare USING bypassmemory whatatt_type whatname.
IF bypassmemory = ''.
Fetch List From Memory
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = listobject
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'LIST_FROM_MEMORY'.
ENDIF.
CALL FUNCTION 'TABLE_COMPRESS'
IMPORTING
COMPRESSED_SIZE =
TABLES
in = listobject
out = objbin
EXCEPTIONS
OTHERS = 1
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'TABLE_COMPRESS'.
ENDIF.
ENDIF.
Header Data
Already Done Thru FM
Main Text
Already Done Thru FM
Packing Info For Text Data
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'TXT'.
APPEND objpack.
Packing Info Attachment
att_type = whatatt_type..
DESCRIBE TABLE objbin LINES tab_lines.
READ TABLE objbin INDEX tab_lines.
objpack-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = att_type.
objpack-obj_name = 'ATTACHMENT'.
objpack-obj_descr = whatname.
APPEND objpack.
Receiver List
Already done thru fm
ENDFORM. "ml_prepare
FORM
FORM ml_dosend.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = docdata
put_in_outbox = 'X'
commit_work = 'X' "used from rel. 6.10
IMPORTING
SENT_TO_ALL =
NEW_OBJECT_ID =
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
CONTENTS_HEX = objhex
OBJECT_PARA =
object_parb =
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8
IF sy-subrc <> 0.
MESSAGE ID 'SO' TYPE 'S' NUMBER '023'
WITH docdata-obj_name.
ENDIF.
ENDFORM. "ml_customize
FORM
FORM ml_spooltopdf USING whatspoolid.
DATA : pdf LIKE tline OCCURS 0 WITH HEADER LINE.
Call Function
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = whatspoolid
TABLES
pdf = pdf
EXCEPTIONS
err_no_otf_spooljob = 1
OTHERS = 12.
Convert
PERFORM doconv TABLES pdf objbin.
ENDFORM. "ml_spooltopdf
FORM
FORM doconv TABLES
mypdf STRUCTURE tline
outbin STRUCTURE solisti1.
Data
DATA : pos TYPE i.
DATA : len TYPE i.
Loop And Put Data
LOOP AT mypdf.
pos = 255 - len.
IF pos > 134. "length of pdf_table
pos = 134.
ENDIF.
outbin+len = mypdf(pos).
len = len + pos.
IF len = 255. "length of out (contents_bin)
APPEND outbin.
CLEAR: outbin, len.
IF pos < 134.
outbin = mypdf+pos.
len = 134 - pos.
ENDIF.
ENDIF.
ENDLOOP.
IF len > 0.
APPEND outbin.
ENDIF.
ENDFORM. "doconv
CODE FOR PROGRAM
5.
REPORT zam_temp147 .
INCLUDE zami_inclfor_mail.
DATA
DATA : itab LIKE tline OCCURS 0 WITH HEADER LINE.
DATA : file_name TYPE string.
data : path like PCFILE-PATH.
data : extension(5) type c.
data : name(100) type c.
SELECTION SCREEN
PARAMETERS : receiver TYPE somlreci1-receiver lower case.
PARAMETERS : p_file LIKE rlgrap-filename
OBLIGATORY.
AT SELECTION SCREEN
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CLEAR p_file.
CALL FUNCTION 'F4_FILENAME'
IMPORTING
file_name = p_file.
START-OF-SELECTION
START-OF-SELECTION.
PERFORM ml_customize USING 'Tst' 'Testing'.
PERFORM ml_addrecp USING receiver 'U'.
PERFORM upl.
PERFORM doconv TABLES itab objbin.
PERFORM ml_prepare USING 'X' extension name.
PERFORM ml_dosend.
SUBMIT rsconn01
WITH mode EQ 'INT'
AND RETURN.
FORM
FORM upl.
file_name = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = file_name
filetype = 'BIN'
TABLES
data_tab = itab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
path = file_name.
CALL FUNCTION 'PC_SPLIT_COMPLETE_FILENAME'
EXPORTING
complete_filename = path
CHECK_DOS_FORMAT =
IMPORTING
DRIVE =
EXTENSION = extension
NAME = name
NAME_WITH_EXT =
PATH =
EXCEPTIONS
INVALID_DRIVE = 1
INVALID_EXTENSION = 2
INVALID_NAME = 3
INVALID_PATH = 4
OTHERS = 5
ENDFORM. "upl
regards,
amit m.

Function Module for sending an Attachment

Not able to find the Function Module for sending an Attachment to the email ids.
Please help.

Hi bala,
1. There is some trick involved in attachment
in the binary files.
2. I have made a program (and it works fantastic)
ONLY 6 LINES FOR EMAILING
BELIEVE ME
ITS A FANTASTIC PROGRAM.
IT WILL WORK LIKE OUTLOOK EXPRESS !
3. The user is provided with
a) file name
b) email address to send mail
and it sends ANY FILE (.xls,.pdf .xyz..)
Instantaneously !
4. Make two things first :
1. Include with the name : ZAMI_INCLFOR_MAIL
2. Report with the name : ZAM_TEMP147 (any name will do)
3. Activate both and execute (2)
4. After providing filename, email adress
5. Code for Include :
10.08.2005 Amit M - Created
Include For Mail (First Req F16)
Modification Log
Data
DATA: docdata LIKE sodocchgi1,
objpack LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE,
objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objhex LIKE solix OCCURS 10 WITH HEADER LINE,
reclist LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
DATA: tab_lines TYPE i,
doc_size TYPE i,
att_type LIKE soodk-objtp.
DATA: listobject LIKE abaplist OCCURS 1 WITH HEADER LINE.
FORM
FORM ml_customize USING objname objdesc.
Clear Variables
CLEAR docdata.
REFRESH objpack.
CLEAR objpack.
REFRESH objhead.
REFRESH objtxt.
CLEAR objtxt.
REFRESH objbin.
CLEAR objbin.
REFRESH objhex.
CLEAR objhex.
REFRESH reclist.
CLEAR reclist.
REFRESH listobject.
CLEAR listobject.
CLEAR tab_lines.
CLEAR doc_size.
CLEAR att_type.
Set Variables
docdata-obj_name = objname.
docdata-obj_descr = objdesc.
ENDFORM. "ml_customize
FORM
FORM ml_addrecp USING preceiver prec_type.
CLEAR reclist.
reclist-receiver = preceiver.
reclist-rec_type = prec_type.
APPEND reclist.
ENDFORM. "ml_customize
FORM
FORM ml_addtxt USING ptxt.
CLEAR objtxt.
objtxt = ptxt.
APPEND objtxt.
ENDFORM. "ml_customize
FORM
FORM ml_prepare USING bypassmemory whatatt_type whatname.
IF bypassmemory = ''.
Fetch List From Memory
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = listobject
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'LIST_FROM_MEMORY'.
ENDIF.
CALL FUNCTION 'TABLE_COMPRESS'
IMPORTING
COMPRESSED_SIZE =
TABLES
in = listobject
out = objbin
EXCEPTIONS
OTHERS = 1
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'TABLE_COMPRESS'.
ENDIF.
ENDIF.
Header Data
Already Done Thru FM
Main Text
Already Done Thru FM
Packing Info For Text Data
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'TXT'.
APPEND objpack.
Packing Info Attachment
att_type = whatatt_type..
DESCRIBE TABLE objbin LINES tab_lines.
READ TABLE objbin INDEX tab_lines.
objpack-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = att_type.
objpack-obj_name = 'ATTACHMENT'.
objpack-obj_descr = whatname.
APPEND objpack.
Receiver List
Already done thru fm
ENDFORM. "ml_prepare
FORM
FORM ml_dosend.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = docdata
put_in_outbox = 'X'
commit_work = 'X' "used from rel. 6.10
IMPORTING
SENT_TO_ALL =
NEW_OBJECT_ID =
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
CONTENTS_HEX = objhex
OBJECT_PARA =
object_parb =
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8
IF sy-subrc <> 0.
MESSAGE ID 'SO' TYPE 'S' NUMBER '023'
WITH docdata-obj_name.
ENDIF.
ENDFORM. "ml_customize
FORM
FORM ml_spooltopdf USING whatspoolid.
DATA : pdf LIKE tline OCCURS 0 WITH HEADER LINE.
Call Function
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = whatspoolid
TABLES
pdf = pdf
EXCEPTIONS
err_no_otf_spooljob = 1
OTHERS = 12.
Convert
PERFORM doconv TABLES pdf objbin.
ENDFORM. "ml_spooltopdf
FORM
FORM doconv TABLES
mypdf STRUCTURE tline
outbin STRUCTURE solisti1.
Data
DATA : pos TYPE i.
DATA : len TYPE i.
Loop And Put Data
LOOP AT mypdf.
pos = 255 - len.
IF pos > 134. "length of pdf_table
pos = 134.
ENDIF.
outbin+len = mypdf(pos).
len = len + pos.
IF len = 255. "length of out (contents_bin)
APPEND outbin.
CLEAR: outbin, len.
IF pos < 134.
outbin = mypdf+pos.
len = 134 - pos.
ENDIF.
ENDIF.
ENDLOOP.
IF len > 0.
APPEND outbin.
ENDIF.
ENDFORM. "doconv
CODE FOR PROGRAM
5.
REPORT zam_temp147 .
INCLUDE zami_inclfor_mail.
DATA
DATA : itab LIKE tline OCCURS 0 WITH HEADER LINE.
DATA : file_name TYPE string.
data : path like PCFILE-PATH.
data : extension(5) type c.
data : name(100) type c.
SELECTION SCREEN
PARAMETERS : receiver TYPE somlreci1-receiver lower case.
PARAMETERS : p_file LIKE rlgrap-filename
OBLIGATORY.
AT SELECTION SCREEN
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CLEAR p_file.
CALL FUNCTION 'F4_FILENAME'
IMPORTING
file_name = p_file.
START-OF-SELECTION
START-OF-SELECTION.
PERFORM ml_customize USING 'Tst' 'Testing'.
PERFORM ml_addrecp USING receiver 'U'.
PERFORM upl.
PERFORM doconv TABLES itab objbin.
PERFORM ml_prepare USING 'X' extension name.
PERFORM ml_dosend.
SUBMIT rsconn01
WITH mode EQ 'INT'
AND RETURN.
FORM
FORM upl.
file_name = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = file_name
filetype = 'BIN'
TABLES
data_tab = itab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
path = file_name.
CALL FUNCTION 'PC_SPLIT_COMPLETE_FILENAME'
EXPORTING
complete_filename = path
CHECK_DOS_FORMAT =
IMPORTING
DRIVE =
EXTENSION = extension
NAME = name
NAME_WITH_EXT =
PATH =
EXCEPTIONS
INVALID_DRIVE = 1
INVALID_EXTENSION = 2
INVALID_NAME = 3
INVALID_PATH = 4
OTHERS = 5
ENDFORM. "upl
regards,
amit m.

Function Module to send output list to mail.

Hi,
Could anyone let me know the function module to send output list to mail.
Regards,
Ramesh

Hi,
Please try with following sample code
Sending mail with attachment
This program will allowed you to send email with attachment.
First, specify the attachment file from your local hardisk and execute.
Next, specify the sender email address and click the send button.
report YUP_MAIL.
data method1 like sy-ucomm.
data g_user like soudnamei1.
data g_user_data like soudatai1.
data g_owner like soud-usrnam.
data g_receipients like soos1 occurs 0 with header line.
data g_document like sood4 .
data g_header like sood2.
data g_folmam like sofm2.
data g_objcnt like soli occurs 0 with header line.
data g_objhead like soli occurs 0 with header line.
data g_objpara like selc occurs 0 with header line.
data g_objparb like soop1 occurs 0 with header line.
data g_attachments like sood5 occurs 0 with header line.
data g_references like soxrl occurs 0 with header line.
data g_authority like sofa-usracc.
data g_ref_document like sood4.
data g_new_parent like soodk.
data: begin of g_files occurs 10 ,
text(4096) type c,
   end of g_files.
data : fold_number(12) type c,
       fold_yr(2) type c,
       fold_type(3) type c.
parameters ws_file(4096) type c default 'c:\debugger.txt'.
Can me any file fromyour pc ....either xls or word or ppt etc ...
g_user-sapname = sy-uname.
call function 'SO_USER_READ_API1'
exporting
   user                            = g_user
   PREPARE_FOR_FOLDER_ACCESS       = ' '
importing
   user_data                       = g_user_data
EXCEPTIONS
   USER_NOT_EXIST                  = 1
   PARAMETER_ERROR                 = 2
   X_ERROR                         = 3
   OTHERS                          = 4
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
fold_type = g_user_data-outboxfol+0(3).
fold_yr = g_user_data-outboxfol+3(2).
fold_number = g_user_data-outboxfol+5(12).
clear g_files.
refresh : g_objcnt,
g_objhead,
g_objpara,
g_objparb,
g_receipients,
g_attachments,
g_references,
g_files.
method1 = 'SAVE'.
g_document-foltp = fold_type.
g_document-folyr   = fold_yr.
g_document-folno   = fold_number.
g_document-objtp   = g_user_data-object_typ.
*g_document-OBJYR   = '27'.
*g_document-OBJNO   = '000000002365'.
*g_document-OBJNAM = 'MESSAGE'.
g_document-objdes   = 'sap-img.com testing by program'.
g_document-folrg   = 'O'.
*g_document-okcode   = 'CHNG'.
g_document-objlen = '0'.
g_document-file_ext = 'TXT'.
g_header-objdes = 'sap-img.com testing by program'.
g_header-file_ext = 'TXT'.
call function 'SO_DOCUMENT_REPOSITORY_MANAGER'
exporting
    method             = method1
   office_user        = sy-uname
   ref_document       = g_ref_document
   new_parent         = g_new_parent
importing
   authority          = g_authority
tables
   objcont            = g_objcnt
   objhead            = g_objhead
   objpara            = g_objpara
   objparb            = g_objparb
   recipients         = g_receipients
   attachments        = g_attachments
   references         = g_references
   files              = g_files
changing
    document           = g_document
   header_data        = g_header
FOLMEM_DATA        =
RECEIVE_DATA       =
File from the pc to send...
method1 = 'ATTCREATEFROMPC'.
g_files-text = ws_file.
append g_files.
call function 'SO_DOCUMENT_REPOSITORY_MANAGER'
exporting
    method             = method1
   office_user        = g_owner
   ref_document       = g_ref_document
   new_parent         = g_new_parent
importing
   authority          = g_authority
tables
   objcont            = g_objcnt
   objhead            = g_objhead
   objpara            = g_objpara
   objparb            = g_objparb
   recipients         = g_receipients
   attachments        = g_attachments
   references         = g_references
   files              = g_files
changing
    document           = g_document
   header_data        = g_header
method1 = 'SEND'.
g_receipients-recnam = 'MK085'.
g_receipients-recesc = 'B'.
g_receipients-sndex = 'X'.
append g_receipients.
call function 'SO_DOCUMENT_REPOSITORY_MANAGER'
exporting
    method             = method1
   office_user        = g_owner
   ref_document       = g_ref_document
   new_parent         = g_new_parent
importing
   authority          = g_authority
tables
   objcont            = g_objcnt
   objhead            = g_objhead
   objpara            = g_objpara
   objparb            = g_objparb
   recipients         = g_receipients
   attachments        = g_attachments
   references         = g_references
   files              = g_files
changing
    document           = g_document
   header_data        = g_header.
*-- End of Program
Thanks,
-Pramod

Function Module For Sending Mail

Hi Experts,
Is there any function module to send a mail from the ABAP program.
My requirement is to run a report and send the content of the an Internal table as mail.
Thanks in Advance

hI,
Here is the example program
*& Report ZSENDEMAIL *
*& Example of sending external email via SAPCONNECT *
REPORT zsendemail .
PARAMETERS: psubject(40) type c default 'Hello',
p_email(40) type c default '[email protected]' .
data: it_packing_list like sopcklsti1 occurs 0 with header line,
it_contents like solisti1 occurs 0 with header line,
it_receivers like somlreci1 occurs 0 with header line,
it_attachment like solisti1 occurs 0 with header line,
gd_cnt type i,
gd_sent_all(1) type c,
gd_doc_data like sodocchgi1,
gd_error type sy-subrc.
data: it_message type standard table of SOLISTI1 initial size 0
with header line.
*START-OF-SELECTION.
START-OF-SELECTION.
Perform populate_message_table.
*Send email message, although is not sent from SAP until mail send
*program has been executed(rsconn01)
PERFORM send_email_message.
*Instructs mail send program for SAPCONNECT to send email(rsconn01)
perform initiate_mail_execute_program.
*& Form POPULATE_MESSAGE_TABLE
Adds text to email text table
form populate_message_table.
Append 'Email line 1' to it_message.
Append 'Email line 2' to it_message.
Append 'Email line 3' to it_message.
Append 'Email line 4' to it_message.
endform. " POPULATE_MESSAGE_TABLE
*& Form SEND_EMAIL_MESSAGE
Send email message
form send_email_message.
Fill the document data.
gd_doc_data-doc_size = 1.
Populate the subject/generic message attributes
gd_doc_data-obj_langu = sy-langu.
gd_doc_data-obj_name = 'SAPRPT'.
gd_doc_data-obj_descr = psubject.
gd_doc_data-sensitivty = 'F'.
Describe the body of the message
clear it_packing_list.
refresh it_packing_list.
it_packing_list-transf_bin = space.
it_packing_list-head_start = 1.
it_packing_list-head_num = 0.
it_packing_list-body_start = 1.
describe table it_message lines it_packing_list-body_num.
it_packing_list-doc_type = 'RAW'.
append it_packing_list.
Add the recipients email address
clear it_receivers.
refresh it_receivers.
it_receivers-receiver = p_email.
it_receivers-rec_type = 'U'.
it_receivers-com_type = 'INT'.
it_receivers-notif_del = 'X'.
it_receivers-notif_ndel = 'X'.
append it_receivers.
Call the FM to post the message to SAPMAIL
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
exporting
document_data = gd_doc_data
put_in_outbox = 'X'
importing
sent_to_all = gd_sent_all
tables
packing_list = it_packing_list
contents_txt = it_message
receivers = it_receivers
exceptions
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
others = 8.
Store function module return code
gd_error = sy-subrc.
Get it_receivers return code
loop at it_receivers.
endloop.
endform. " SEND_EMAIL_MESSAGE
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
Instructs mail send program for SAPCONNECT to send email.
form initiate_mail_execute_program.
wait up to 2 seconds.
if gd_error eq 0.
submit rsconn01 with mode = 'INT'
with output = 'X'
and return.
endif.
endform. " INITIATE_MAIL_EXECUTE_PROGRAM
Regards

Function modules to send mails from ABAP

hi
can any one give me the function module to send mails from abap to yahoomail or gmail etc. i will be grateful if any one can provide me a sample code.
thanks & regards
rajesh

Hi,
check this site:
http://www.sapdevelopment.co.uk/reporting/email/email_mbody.htm
Replace the
p_email(40) type c default '[email protected]' .
with ur yahoo or gmail id
This is the FM that u needed:
'SO_NEW_DOCUMENT_ATT_SEND_API1'
http://www.kabai.com/abaps/z00.htm
http://www.sapdevelopment.co.uk/reporting/email/emailhome.htm
/people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface
/people/thomas.jung3/blog/2004/09/07/sending-e-mail-from-abap--version-46d-and-lower--api-interface
Hope this solves your question.
Best Regards,
Anjali

Function module to send SMS

Hello Friends,
What is the FM to send SMS.
I am using SO_NEW_DOCUMENT_SEND_API1 function module and Receive type as 'K = Pager/SMS' .
Since i am using HTTP configuration i have to use this.
I tried SMS blog, its working. But there i have to hardcode URL. I dont want to do that.
So Friends, plase tell me is there any function module to send SMS.
Regards
Satish

Hello Dinesh,
Can you please send me code of Sedning SMS thorugh SAP and what confiuration is required for it?
Please send it on my email id [email protected]
Thanks in advance
Regards,
Arti

Function Module to send SOAP message

Is that possible to use function module to send out SOAP message from CRM to external system?
Thanks a lot in advance

Hello Rokie,
Please go through these links.
http://help.sap.com/saphelp_nw04s/helpdata/en/fc/5ad93f130f9215e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/14/ef2940cbf2195de10000000a1550b0/content.htm
regards,
Muralidhar Prasad.C

Sending email to user using the notification template in OIM 11g

Hi all
I have created a Notification Template using web console in OIM 11g.
Iam able to access the contents from notification template in my java code.
But iam not able to find the correct api's to send email to user using the notification template
(like tcEmailNotificationUtil using this class we can connect to email template created in design console and creating IT resourse we can send email to user using the method sendEmail).
Waiting for your help and pointers
Thanks and Regards
Bipin patil

Thanks GP!.
But i have the same doubt here.
"The Notification Event is defined through a XML file that must be loaded into MDS database." - in which path and in what name it should be.
Because under /metadata/iam-features-notification, i couldnt see any event Xml present. I thought atleast we could see the existing OOB notification template's event xml files.
Please let me know if you are aware.
Thanks,
Amudha

Function Module to send emails to users

Similar Messages

Maybe you are looking for