Function module to send mails to outlook

Hi All,
Can you let me know if there is an FM to send mails to the OUTLOOK. Also let me know what parameters need to be passed to the FM.
I need to send mails to the individual and also to the user group.
Regards
Shiva

HI Check the usage of the FM..
DATA: ls_docudata LIKE sodocchgi1,
      lt_packlist LIKE sopcklsti1 OCCURS 0,
      ls_packlist LIKE LINE OF lt_packlist,
      lt_text     LIKE solisti1 OCCURS 0,
      ls_text     LIKE LINE OF lt_text,
      l_sender    LIKE soextreci1-receiver,
      l_tab_lines LIKE sy-tabix.
DATA: lt_receivers LIKE somlreci1 OCCURS 0,
      ls_receivers LIKE LINE OF lt_receivers.
Mail properties
ls_docudata-obj_descr = 'Achtung mlicher Datenschiefstand'(m01).
ls_docudata-obj_langu = sy-langu.
ls_docudata-sensitivty = 'F'.
ls_docudata-no_change = ' '.
ls_docudata-obj_prio   = '1'.
ls_docudata-proc_type = 'F'.
ls_docudata-proc_name = 'RKE_START_ERROR_KF631'.
ls_docudata-free_del   = 'X'.
Sender
l_sender = sy-uname.
Receiver
ls_receivers-receiver = sy-uname.
ls_receivers-rec_type = 'B'.
ls_receivers-express = 'X'.
APPEND ls_receivers TO lt_receivers.
Text
ls_text = text-m02. " F・ weitere Informationen w臧len ...
APPEND ls_text TO lt_text.
DESCRIBE TABLE lt_text LINES l_tab_lines.
Document properties
ls_packlist-body_start = 1.
ls_packlist-body_num = l_tab_lines.
ls_packlist-doc_type = 'RAW'.
APPEND ls_packlist TO lt_packlist.
Send mail
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
     EXPORTING
          document_data              = ls_docudata
          sender_address             = l_sender
          sender_address_type        = 'B'
     TABLES
          packing_list               = lt_packlist
          contents_txt               = lt_text
          receivers                  = lt_receivers
     EXCEPTIONS
          too_many_receivers         = 1
          document_not_sent          = 2
          document_type_not_exist    = 3
          operation_no_authorization = 4
          parameter_error            = 5
          x_error                    = 6
          enqueue_error              = 7
          OTHERS                     = 8.
Praveen.
Hope it Helps .

Similar Messages

Function module to send mail from SAP

Can any one please tell the Function module to send mail from SAP. The scenario is like this,I have a file in local system that i have to send to a particular mail address like [email protected] through a report program.

Hi shafiq,
1. There is some trick involved
in the binary files.
2. I have made a program (and it works fantastic)
ONLY 6 LINES FOR EMAILING
BELIEVE ME
ITS A FANTASTIC PROGRAM.
IT WILL WORK LIKE OUTLOOK EXPRESS !
3. The user is provided with
a) file name
b) email address to send mail
and it sends ANY FILE (.xls,.pdf .xyz..)
Instantaneously !
4. Make two things first :
1. Include with the name : ZAMI_INCLFOR_MAIL
2. Report with the name : ZAM_TEMP147 (any name will do)
3. Activate both and execute (2)
4. After providing filename, email adress
5. Code for Include :
10.08.2005 Amit M - Created
Include For Mail (First Req F16)
Modification Log
Data
DATA: docdata LIKE sodocchgi1,
objpack LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE,
objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objhex LIKE solix OCCURS 10 WITH HEADER LINE,
reclist LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
DATA: tab_lines TYPE i,
doc_size TYPE i,
att_type LIKE soodk-objtp.
DATA: listobject LIKE abaplist OCCURS 1 WITH HEADER LINE.
FORM
FORM ml_customize USING objname objdesc.
Clear Variables
CLEAR docdata.
REFRESH objpack.
CLEAR objpack.
REFRESH objhead.
REFRESH objtxt.
CLEAR objtxt.
REFRESH objbin.
CLEAR objbin.
REFRESH objhex.
CLEAR objhex.
REFRESH reclist.
CLEAR reclist.
REFRESH listobject.
CLEAR listobject.
CLEAR tab_lines.
CLEAR doc_size.
CLEAR att_type.
Set Variables
docdata-obj_name = objname.
docdata-obj_descr = objdesc.
ENDFORM. "ml_customize
FORM
FORM ml_addrecp USING preceiver prec_type.
CLEAR reclist.
reclist-receiver = preceiver.
reclist-rec_type = prec_type.
APPEND reclist.
ENDFORM. "ml_customize
FORM
FORM ml_addtxt USING ptxt.
CLEAR objtxt.
objtxt = ptxt.
APPEND objtxt.
ENDFORM. "ml_customize
FORM
FORM ml_prepare USING bypassmemory whatatt_type whatname.
IF bypassmemory = ''.
Fetch List From Memory
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = listobject
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'LIST_FROM_MEMORY'.
ENDIF.
CALL FUNCTION 'TABLE_COMPRESS'
IMPORTING
COMPRESSED_SIZE =
TABLES
in = listobject
out = objbin
EXCEPTIONS
OTHERS = 1
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'TABLE_COMPRESS'.
ENDIF.
ENDIF.
Header Data
Already Done Thru FM
Main Text
Already Done Thru FM
Packing Info For Text Data
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'TXT'.
APPEND objpack.
Packing Info Attachment
att_type = whatatt_type..
DESCRIBE TABLE objbin LINES tab_lines.
READ TABLE objbin INDEX tab_lines.
objpack-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = att_type.
objpack-obj_name = 'ATTACHMENT'.
objpack-obj_descr = whatname.
APPEND objpack.
Receiver List
Already done thru fm
ENDFORM. "ml_prepare
FORM
FORM ml_dosend.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = docdata
put_in_outbox = 'X'
commit_work = 'X' "used from rel. 6.10
IMPORTING
SENT_TO_ALL =
NEW_OBJECT_ID =
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
CONTENTS_HEX = objhex
OBJECT_PARA =
object_parb =
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8
IF sy-subrc <> 0.
MESSAGE ID 'SO' TYPE 'S' NUMBER '023'
WITH docdata-obj_name.
ENDIF.
ENDFORM. "ml_customize
FORM
FORM ml_spooltopdf USING whatspoolid.
DATA : pdf LIKE tline OCCURS 0 WITH HEADER LINE.
Call Function
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = whatspoolid
TABLES
pdf = pdf
EXCEPTIONS
err_no_otf_spooljob = 1
OTHERS = 12.
Convert
PERFORM doconv TABLES pdf objbin.
ENDFORM. "ml_spooltopdf
FORM
FORM doconv TABLES
mypdf STRUCTURE tline
outbin STRUCTURE solisti1.
Data
DATA : pos TYPE i.
DATA : len TYPE i.
Loop And Put Data
LOOP AT mypdf.
pos = 255 - len.
IF pos > 134. "length of pdf_table
pos = 134.
ENDIF.
outbin+len = mypdf(pos).
len = len + pos.
IF len = 255. "length of out (contents_bin)
APPEND outbin.
CLEAR: outbin, len.
IF pos < 134.
outbin = mypdf+pos.
len = 134 - pos.
ENDIF.
ENDIF.
ENDLOOP.
IF len > 0.
APPEND outbin.
ENDIF.
ENDFORM. "doconv
CODE FOR PROGRAM
5.
REPORT zam_temp147 .
INCLUDE zami_inclfor_mail.
DATA
DATA : itab LIKE tline OCCURS 0 WITH HEADER LINE.
DATA : file_name TYPE string.
data : path like PCFILE-PATH.
data : extension(5) type c.
data : name(100) type c.
SELECTION SCREEN
PARAMETERS : receiver TYPE somlreci1-receiver lower case.
PARAMETERS : p_file LIKE rlgrap-filename
OBLIGATORY.
AT SELECTION SCREEN
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CLEAR p_file.
CALL FUNCTION 'F4_FILENAME'
IMPORTING
file_name = p_file.
START-OF-SELECTION
START-OF-SELECTION.
PERFORM ml_customize USING 'Tst' 'Testing'.
PERFORM ml_addrecp USING receiver 'U'.
PERFORM upl.
PERFORM doconv TABLES itab objbin.
PERFORM ml_prepare USING 'X' extension name.
PERFORM ml_dosend.
SUBMIT rsconn01
WITH mode EQ 'INT'
AND RETURN.
FORM
FORM upl.
file_name = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = file_name
filetype = 'BIN'
TABLES
data_tab = itab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
path = file_name.
CALL FUNCTION 'PC_SPLIT_COMPLETE_FILENAME'
EXPORTING
complete_filename = path
CHECK_DOS_FORMAT =
IMPORTING
DRIVE =
EXTENSION = extension
NAME = name
NAME_WITH_EXT =
PATH =
EXCEPTIONS
INVALID_DRIVE = 1
INVALID_EXTENSION = 2
INVALID_NAME = 3
INVALID_PATH = 4
OTHERS = 5
ENDFORM. "upl
regards,
amit m.

Function modules to send mails from ABAP

hi
can any one give me the function module to send mails from abap to yahoomail or gmail etc. i will be grateful if any one can provide me a sample code.
thanks & regards
rajesh

Hi,
check this site:
http://www.sapdevelopment.co.uk/reporting/email/email_mbody.htm
Replace the
p_email(40) type c default '[email protected]' .
with ur yahoo or gmail id
This is the FM that u needed:
'SO_NEW_DOCUMENT_ATT_SEND_API1'
http://www.kabai.com/abaps/z00.htm
http://www.sapdevelopment.co.uk/reporting/email/emailhome.htm
/people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface
/people/thomas.jung3/blog/2004/09/07/sending-e-mail-from-abap--version-46d-and-lower--api-interface
Hope this solves your question.
Best Regards,
Anjali

Function Module For Sending Mail

Hi Experts,
Is there any function module to send a mail from the ABAP program.
My requirement is to run a report and send the content of the an Internal table as mail.
Thanks in Advance

hI,
Here is the example program
*& Report ZSENDEMAIL *
*& Example of sending external email via SAPCONNECT *
REPORT zsendemail .
PARAMETERS: psubject(40) type c default 'Hello',
p_email(40) type c default '[email protected]' .
data: it_packing_list like sopcklsti1 occurs 0 with header line,
it_contents like solisti1 occurs 0 with header line,
it_receivers like somlreci1 occurs 0 with header line,
it_attachment like solisti1 occurs 0 with header line,
gd_cnt type i,
gd_sent_all(1) type c,
gd_doc_data like sodocchgi1,
gd_error type sy-subrc.
data: it_message type standard table of SOLISTI1 initial size 0
with header line.
*START-OF-SELECTION.
START-OF-SELECTION.
Perform populate_message_table.
*Send email message, although is not sent from SAP until mail send
*program has been executed(rsconn01)
PERFORM send_email_message.
*Instructs mail send program for SAPCONNECT to send email(rsconn01)
perform initiate_mail_execute_program.
*& Form POPULATE_MESSAGE_TABLE
Adds text to email text table
form populate_message_table.
Append 'Email line 1' to it_message.
Append 'Email line 2' to it_message.
Append 'Email line 3' to it_message.
Append 'Email line 4' to it_message.
endform. " POPULATE_MESSAGE_TABLE
*& Form SEND_EMAIL_MESSAGE
Send email message
form send_email_message.
Fill the document data.
gd_doc_data-doc_size = 1.
Populate the subject/generic message attributes
gd_doc_data-obj_langu = sy-langu.
gd_doc_data-obj_name = 'SAPRPT'.
gd_doc_data-obj_descr = psubject.
gd_doc_data-sensitivty = 'F'.
Describe the body of the message
clear it_packing_list.
refresh it_packing_list.
it_packing_list-transf_bin = space.
it_packing_list-head_start = 1.
it_packing_list-head_num = 0.
it_packing_list-body_start = 1.
describe table it_message lines it_packing_list-body_num.
it_packing_list-doc_type = 'RAW'.
append it_packing_list.
Add the recipients email address
clear it_receivers.
refresh it_receivers.
it_receivers-receiver = p_email.
it_receivers-rec_type = 'U'.
it_receivers-com_type = 'INT'.
it_receivers-notif_del = 'X'.
it_receivers-notif_ndel = 'X'.
append it_receivers.
Call the FM to post the message to SAPMAIL
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
exporting
document_data = gd_doc_data
put_in_outbox = 'X'
importing
sent_to_all = gd_sent_all
tables
packing_list = it_packing_list
contents_txt = it_message
receivers = it_receivers
exceptions
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
others = 8.
Store function module return code
gd_error = sy-subrc.
Get it_receivers return code
loop at it_receivers.
endloop.
endform. " SEND_EMAIL_MESSAGE
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
Instructs mail send program for SAPCONNECT to send email.
form initiate_mail_execute_program.
wait up to 2 seconds.
if gd_error eq 0.
submit rsconn01 with mode = 'INT'
with output = 'X'
and return.
endif.
endform. " INITIATE_MAIL_EXECUTE_PROGRAM
Regards

Function module to send mail????

Hi,
which function module can we use to send mail in ABAP online program , i dont want to attach any file, just i want to notify the users by writing few lines in the email body. can u help me out in this issue..
Thanks & Regards,
Harsha Ramaiah

Hello,
Check this sample report.
REPORT ZV_SEND_MAIL .
TABLES: EKKO.
PARAMETERS: P_EMAIL   TYPE SOMLRECI1-RECEIVER
TYPES: BEGIN OF T_EKPO,
EBELN TYPE EKPO-EBELN,
EBELP TYPE EKPO-EBELP,
AEDAT TYPE EKPO-AEDAT,
MATNR TYPE EKPO-MATNR,
MENGE TYPE EKPO-MENGE,
END OF T_EKPO.
DATA: IT_EKPO TYPE STANDARD TABLE OF T_EKPO INITIAL SIZE 0,
      WA_EKPO TYPE T_EKPO.
TYPES: BEGIN OF T_CHAREKPO,
EBELN(10) TYPE C,
EBELP(5) TYPE C,
AEDAT(8) TYPE C,
MATNR(18) TYPE C,
MENGE(16)," LIKE EKPO-MENGE,
END OF T_CHAREKPO.
DATA: WA_CHAREKPO TYPE T_CHAREKPO.
DATA:   IT_MESSAGE TYPE STANDARD TABLE OF SOLISTI1 INITIAL SIZE 0
                WITH HEADER LINE.
DATA:   IT_ATTACH TYPE STANDARD TABLE OF SOLISTI1 INITIAL SIZE 0
                WITH HEADER LINE.
DATA:   T_PACKING_LIST LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
        T_CONTENTS LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
        T_RECEIVERS LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
        T_ATTACHMENT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
        T_OBJECT_HEADER LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
        W_CNT TYPE I,
        W_SENT_ALL(1) TYPE C,
        W_DOC_DATA LIKE SODOCCHGI1,
        GD_ERROR    TYPE SY-SUBRC,
        GD_RECIEVER TYPE SY-SUBRC.
*START_OF_SELECTION
START-OF-SELECTION.
*   Retrieve sample data from table ekpo
PERFORM DATA_RETRIEVAL.
*   Populate table with detaisl to be entered into .xls file
PERFORM BUILD_XLS_DATA_TABLE.
*END-OF-SELECTION
END-OF-SELECTION.
* Populate message body text
PERFORM POPULATE_EMAIL_MESSAGE_BODY.
* Send file by email as .xls speadsheet
PERFORM SEND_FILE_AS_EMAIL_ATTACHMENT
                               TABLES IT_MESSAGE
                                      IT_ATTACH
                                USING P_EMAIL
                                      'Example .xls documnet attachment'
                                      'XLS'
                                      'filename'
                             CHANGING GD_ERROR
                                      GD_RECIEVER.
*   Instructs mail send program for SAPCONNECT to send email(rsconn01)
PERFORM INITIATE_MAIL_EXECUTE_PROGRAM.
*&      Form DATA_RETRIEVAL
*       Retrieve data form EKPO table and populate itab it_ekko
FORM DATA_RETRIEVAL.
SELECT EBELN EBELP AEDAT MATNR MENGE
*   UP TO 10 ROWS
    FROM EKPO
    INTO CORRESPONDING FIELDS OF TABLE IT_EKPO.
ENDFORM.                    " DATA_RETRIEVAL
*&      Form BUILD_XLS_DATA_TABLE
*       Build data table for .xls document
FORM BUILD_XLS_DATA_TABLE.
CONSTANTS: CON_CRET TYPE X VALUE '0D', "OK for non Unicode
             CON_TAB TYPE X VALUE '09'.   "OK for non Unicode
*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
*class cl_abap_char_utilities definition load.
*constants:
*    con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
*    con_cret type c value cl_abap_char_utilities=>CR_LF.
CONCATENATE 'EBELN' 'EBELP' 'AEDAT' 'MATNR' 'MENGE'
         INTO IT_ATTACH SEPARATED BY CON_TAB.
CONCATENATE CON_CRET IT_ATTACH INTO IT_ATTACH.
APPEND IT_ATTACH.
LOOP AT IT_EKPO INTO WA_CHAREKPO.
    CONCATENATE WA_CHAREKPO-EBELN WA_CHAREKPO-EBELP
                WA_CHAREKPO-AEDAT WA_CHAREKPO-MATNR
                WA_CHAREKPO-MENGE
           INTO IT_ATTACH SEPARATED BY CON_TAB.
    CONCATENATE CON_CRET IT_ATTACH INTO IT_ATTACH.
    APPEND IT_ATTACH.
ENDLOOP.
ENDFORM.                    " BUILD_XLS_DATA_TABLE
*&      Form SEND_FILE_AS_EMAIL_ATTACHMENT
*       Send email
FORM SEND_FILE_AS_EMAIL_ATTACHMENT TABLES PIT_MESSAGE
                                          PIT_ATTACH
                                    USING P_EMAIL
                                          P_MTITLE
                                          P_FORMAT
                                          P_FILENAME
                                          P_ATTDESCRIPTION
                                          P_SENDER_ADDRESS
                                          P_SENDER_ADDRES_TYPE
                                 CHANGING P_ERROR
                                          P_RECIEVER.
DATA: LD_ERROR    TYPE SY-SUBRC,
        LD_RECIEVER TYPE SY-SUBRC,
        LD_MTITLE LIKE SODOCCHGI1-OBJ_DESCR,
        LD_EMAIL LIKE SOMLRECI1-RECEIVER,
        LD_FORMAT TYPE SO_OBJ_TP ,
        LD_ATTDESCRIPTION TYPE SO_OBJ_NAM ,
        LD_ATTFILENAME TYPE SO_OBJ_DES ,
        LD_SENDER_ADDRESS LIKE SOEXTRECI1-RECEIVER,
        LD_SENDER_ADDRESS_TYPE LIKE SOEXTRECI1-ADR_TYP,
        LD_RECEIVER LIKE SY-SUBRC.
LD_EMAIL   = P_EMAIL.
LD_MTITLE = P_MTITLE.
LD_FORMAT              = P_FORMAT.
LD_ATTDESCRIPTION      = P_ATTDESCRIPTION.
LD_ATTFILENAME         = P_FILENAME.
LD_SENDER_ADDRESS      = P_SENDER_ADDRESS.
LD_SENDER_ADDRESS_TYPE = P_SENDER_ADDRES_TYPE.
* Fill the document data.
W_DOC_DATA-DOC_SIZE = 1.
* Populate the subject/generic message attributes
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE .
W_DOC_DATA-SENSITIVTY = 'F'.
* Fill the document data and get size of attachment
CLEAR W_DOC_DATA.
READ TABLE IT_ATTACH INDEX W_CNT.
W_DOC_DATA-DOC_SIZE =
     ( W_CNT - 1 ) * 255 + STRLEN( IT_ATTACH ).
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME   = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE.
W_DOC_DATA-SENSITIVTY = 'F'.
CLEAR T_ATTACHMENT.
REFRESH T_ATTACHMENT.
T_ATTACHMENT[] = PIT_ATTACH[].
* Describe the body of the message
CLEAR T_PACKING_LIST.
REFRESH T_PACKING_LIST.
T_PACKING_LIST-TRANSF_BIN = SPACE.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM = 0.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE IT_MESSAGE LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE = 'RAW'.
APPEND T_PACKING_LIST.
* Create attachment notification
T_PACKING_LIST-TRANSF_BIN = 'X'.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM   = 1.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE T_ATTACHMENT LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE   = LD_FORMAT.
T_PACKING_LIST-OBJ_DESCR = LD_ATTDESCRIPTION.
T_PACKING_LIST-OBJ_NAME   = LD_ATTFILENAME.
T_PACKING_LIST-DOC_SIZE   = T_PACKING_LIST-BODY_NUM * 255.
APPEND T_PACKING_LIST.
* Add the recipients email address
CLEAR T_RECEIVERS.
REFRESH T_RECEIVERS.
T_RECEIVERS-RECEIVER = LD_EMAIL.
T_RECEIVERS-REC_TYPE = 'U'.
T_RECEIVERS-COM_TYPE = 'INT'.
T_RECEIVERS-NOTIF_DEL = 'X'.
T_RECEIVERS-NOTIF_NDEL = 'X'.
APPEND T_RECEIVERS.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
       EXPORTING
            DOCUMENT_DATA              = W_DOC_DATA
            PUT_IN_OUTBOX              = 'X'
            SENDER_ADDRESS             = LD_SENDER_ADDRESS
            SENDER_ADDRESS_TYPE        = LD_SENDER_ADDRESS_TYPE
            COMMIT_WORK                = 'X'
       IMPORTING
            SENT_TO_ALL                = W_SENT_ALL
       TABLES
            PACKING_LIST               = T_PACKING_LIST
            CONTENTS_BIN               = T_ATTACHMENT
            CONTENTS_TXT               = IT_MESSAGE
            RECEIVERS                  = T_RECEIVERS
       EXCEPTIONS
            TOO_MANY_RECEIVERS         = 1
            DOCUMENT_NOT_SENT          = 2
            DOCUMENT_TYPE_NOT_EXIST    = 3
            OPERATION_NO_AUTHORIZATION = 4
            PARAMETER_ERROR            = 5
            X_ERROR                    = 6
            ENQUEUE_ERROR              = 7
            OTHERS                     = 8.
* Populate zerror return code
LD_ERROR = SY-SUBRC.
* Populate zreceiver return code
LOOP AT T_RECEIVERS.
    LD_RECEIVER = T_RECEIVERS-RETRN_CODE.
ENDLOOP.
ENDFORM.
*&      Form INITIATE_MAIL_EXECUTE_PROGRAM
*       Instructs mail send program for SAPCONNECT to send email.
FORM INITIATE_MAIL_EXECUTE_PROGRAM.
WAIT UP TO 2 SECONDS.
SUBMIT RSCONN01 WITH MODE = 'INT'
                WITH OUTPUT = 'X'
                AND RETURN.
ENDFORM.                    " INITIATE_MAIL_EXECUTE_PROGRAM
*&      Form POPULATE_EMAIL_MESSAGE_BODY
*        Populate message body text
FORM POPULATE_EMAIL_MESSAGE_BODY.
REFRESH IT_MESSAGE.
IT_MESSAGE = 'Please find attached a list test ekpo records'.
APPEND IT_MESSAGE.
ENDFORM.                    " POPULATE_EMAIL_MESSAGE_BODY
Cheers,
Vasanth

Function Module to send a mail in PDF/ XLS format

Can you please tell me the name of a function module where a mail to be send in a non-sap box. And then mail which will be send is in a PDF/ XLS format.
Regards,
Subhasish

Hi Subhasish,
These are the FM for sending external email :-
SO_DOCUMENT_SEND_API1
SAPoffice: Send new document with attachments via RFC
SO_NEW_DOCUMENT_ATT_SEND_API1
(In 4.6C only, You can go to SE37 and click the documentation on how to use it. A sample program is provided there.)
SAPoffice: Send new document with attachments via RFC
Note : If you are using FM SO_NEW_DOCUMENT_ATT_SEND_API1 then Export Parameter DOCUMENT_DATA-OBJ_DESCR contains the Subject.
SO_NEW_DOCUMENT_SEND_API1
SAPoffice: Send new document
How to send a report to an external mail-id?
Try this sample code :-
REPORT ZREPORT_TO_EMAIL NO STANDARD PAGE HEADING LINE-SIZE 200.
DATA : BEGIN OF ITAB OCCURS 0,
PERNR LIKE PA0001-PERNR,
ENAME LIKE PA0001-ENAME,
END OF ITAB.
DATA: message_content LIKE soli OCCURS 10 WITH HEADER LINE,
receiver_list LIKE soos1 OCCURS 5 WITH HEADER LINE,
packing_list LIKE soxpl OCCURS 2 WITH HEADER LINE,
listobject LIKE abaplist OCCURS 10,
compressed_attachment LIKE soli OCCURS 100 WITH HEADER LINE,
w_object_hd_change LIKE sood1,
compressed_size LIKE sy-index.
START-OF-SELECTION.
SELECT PERNR ENAME
INTO CORRESPONDING FIELDS OF TABLE ITAB
FROM PA0001
WHERE PERNR < 50.
LOOP AT ITAB.
WRITE :/02 SY-VLINE , ITAB-PERNR, 15 SY-VLINE , ITAB-ENAME, 50
SY-VLINE.
ENDLOOP.
Receivers
receiver_list-recextnam = '[email protected]'. "-->
EMAIL ADDRESS
RECEIVER_list-RECESC = 'E'. "<-
RECEIVER_list-SNDART = 'INT'."<-
RECEIVER_list-SNDPRI = '1'."<-
APPEND receiver_list.
General data
w_object_hd_change-objla = sy-langu.
w_object_hd_change-objnam = 'Object name'.
w_object_hd_change-objsns = 'P'.
Mail subject
w_object_hd_change-objdes = 'Message subject'.
Mail body
APPEND 'Message content' TO message_content.
Attachment
CALL FUNCTION 'SAVE_LIST'
EXPORTING
list_index = '0'
TABLES
listobject = listobject.
CALL FUNCTION 'TABLE_COMPRESS'
IMPORTING
compressed_size = compressed_size
TABLES
in = listobject
out = compressed_attachment.
DESCRIBE TABLE compressed_attachment.
CLEAR packing_list.
packing_list-transf_bin = 'X'.
packing_list-head_start = 0.
packing_list-head_num = 0.
packing_list-body_start = 1.
packing_list-body_num = sy-tfill.
packing_list-objtp = 'ALI'.
packing_list-objnam = 'Object name'.
packing_list-objdes = 'Attachment description'.
packing_list-objlen = compressed_size.
APPEND packing_list.
CALL FUNCTION 'SO_OBJECT_SEND'
EXPORTING
object_hd_change = w_object_hd_change
object_type = 'RAW'
owner = sy-uname
TABLES
objcont = message_content
receivers = receiver_list
packing_list = packing_list
att_cont = compressed_attachment.
Reward points if useful..
Regards,
Goutham.

Function Module to send output list to mail.

Hi,
Could anyone let me know the function module to send output list to mail.
Regards,
Ramesh

Hi,
Please try with following sample code
Sending mail with attachment
This program will allowed you to send email with attachment.
First, specify the attachment file from your local hardisk and execute.
Next, specify the sender email address and click the send button.
report YUP_MAIL.
data method1 like sy-ucomm.
data g_user like soudnamei1.
data g_user_data like soudatai1.
data g_owner like soud-usrnam.
data g_receipients like soos1 occurs 0 with header line.
data g_document like sood4 .
data g_header like sood2.
data g_folmam like sofm2.
data g_objcnt like soli occurs 0 with header line.
data g_objhead like soli occurs 0 with header line.
data g_objpara like selc occurs 0 with header line.
data g_objparb like soop1 occurs 0 with header line.
data g_attachments like sood5 occurs 0 with header line.
data g_references like soxrl occurs 0 with header line.
data g_authority like sofa-usracc.
data g_ref_document like sood4.
data g_new_parent like soodk.
data: begin of g_files occurs 10 ,
text(4096) type c,
   end of g_files.
data : fold_number(12) type c,
       fold_yr(2) type c,
       fold_type(3) type c.
parameters ws_file(4096) type c default 'c:\debugger.txt'.
Can me any file fromyour pc ....either xls or word or ppt etc ...
g_user-sapname = sy-uname.
call function 'SO_USER_READ_API1'
exporting
   user                            = g_user
   PREPARE_FOR_FOLDER_ACCESS       = ' '
importing
   user_data                       = g_user_data
EXCEPTIONS
   USER_NOT_EXIST                  = 1
   PARAMETER_ERROR                 = 2
   X_ERROR                         = 3
   OTHERS                          = 4
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
fold_type = g_user_data-outboxfol+0(3).
fold_yr = g_user_data-outboxfol+3(2).
fold_number = g_user_data-outboxfol+5(12).
clear g_files.
refresh : g_objcnt,
g_objhead,
g_objpara,
g_objparb,
g_receipients,
g_attachments,
g_references,
g_files.
method1 = 'SAVE'.
g_document-foltp = fold_type.
g_document-folyr   = fold_yr.
g_document-folno   = fold_number.
g_document-objtp   = g_user_data-object_typ.
*g_document-OBJYR   = '27'.
*g_document-OBJNO   = '000000002365'.
*g_document-OBJNAM = 'MESSAGE'.
g_document-objdes   = 'sap-img.com testing by program'.
g_document-folrg   = 'O'.
*g_document-okcode   = 'CHNG'.
g_document-objlen = '0'.
g_document-file_ext = 'TXT'.
g_header-objdes = 'sap-img.com testing by program'.
g_header-file_ext = 'TXT'.
call function 'SO_DOCUMENT_REPOSITORY_MANAGER'
exporting
    method             = method1
   office_user        = sy-uname
   ref_document       = g_ref_document
   new_parent         = g_new_parent
importing
   authority          = g_authority
tables
   objcont            = g_objcnt
   objhead            = g_objhead
   objpara            = g_objpara
   objparb            = g_objparb
   recipients         = g_receipients
   attachments        = g_attachments
   references         = g_references
   files              = g_files
changing
    document           = g_document
   header_data        = g_header
FOLMEM_DATA        =
RECEIVE_DATA       =
File from the pc to send...
method1 = 'ATTCREATEFROMPC'.
g_files-text = ws_file.
append g_files.
call function 'SO_DOCUMENT_REPOSITORY_MANAGER'
exporting
    method             = method1
   office_user        = g_owner
   ref_document       = g_ref_document
   new_parent         = g_new_parent
importing
   authority          = g_authority
tables
   objcont            = g_objcnt
   objhead            = g_objhead
   objpara            = g_objpara
   objparb            = g_objparb
   recipients         = g_receipients
   attachments        = g_attachments
   references         = g_references
   files              = g_files
changing
    document           = g_document
   header_data        = g_header
method1 = 'SEND'.
g_receipients-recnam = 'MK085'.
g_receipients-recesc = 'B'.
g_receipients-sndex = 'X'.
append g_receipients.
call function 'SO_DOCUMENT_REPOSITORY_MANAGER'
exporting
    method             = method1
   office_user        = g_owner
   ref_document       = g_ref_document
   new_parent         = g_new_parent
importing
   authority          = g_authority
tables
   objcont            = g_objcnt
   objhead            = g_objhead
   objpara            = g_objpara
   objparb            = g_objparb
   recipients         = g_receipients
   attachments        = g_attachments
   references         = g_references
   files              = g_files
changing
    document           = g_document
   header_data        = g_header.
*-- End of Program
Thanks,
-Pramod

Function Module for sending an Attachment

Not able to find the Function Module for sending an Attachment to the email ids.
Please help.

Hi bala,
1. There is some trick involved in attachment
in the binary files.
2. I have made a program (and it works fantastic)
ONLY 6 LINES FOR EMAILING
BELIEVE ME
ITS A FANTASTIC PROGRAM.
IT WILL WORK LIKE OUTLOOK EXPRESS !
3. The user is provided with
a) file name
b) email address to send mail
and it sends ANY FILE (.xls,.pdf .xyz..)
Instantaneously !
4. Make two things first :
1. Include with the name : ZAMI_INCLFOR_MAIL
2. Report with the name : ZAM_TEMP147 (any name will do)
3. Activate both and execute (2)
4. After providing filename, email adress
5. Code for Include :
10.08.2005 Amit M - Created
Include For Mail (First Req F16)
Modification Log
Data
DATA: docdata LIKE sodocchgi1,
objpack LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE,
objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objhex LIKE solix OCCURS 10 WITH HEADER LINE,
reclist LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
DATA: tab_lines TYPE i,
doc_size TYPE i,
att_type LIKE soodk-objtp.
DATA: listobject LIKE abaplist OCCURS 1 WITH HEADER LINE.
FORM
FORM ml_customize USING objname objdesc.
Clear Variables
CLEAR docdata.
REFRESH objpack.
CLEAR objpack.
REFRESH objhead.
REFRESH objtxt.
CLEAR objtxt.
REFRESH objbin.
CLEAR objbin.
REFRESH objhex.
CLEAR objhex.
REFRESH reclist.
CLEAR reclist.
REFRESH listobject.
CLEAR listobject.
CLEAR tab_lines.
CLEAR doc_size.
CLEAR att_type.
Set Variables
docdata-obj_name = objname.
docdata-obj_descr = objdesc.
ENDFORM. "ml_customize
FORM
FORM ml_addrecp USING preceiver prec_type.
CLEAR reclist.
reclist-receiver = preceiver.
reclist-rec_type = prec_type.
APPEND reclist.
ENDFORM. "ml_customize
FORM
FORM ml_addtxt USING ptxt.
CLEAR objtxt.
objtxt = ptxt.
APPEND objtxt.
ENDFORM. "ml_customize
FORM
FORM ml_prepare USING bypassmemory whatatt_type whatname.
IF bypassmemory = ''.
Fetch List From Memory
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = listobject
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'LIST_FROM_MEMORY'.
ENDIF.
CALL FUNCTION 'TABLE_COMPRESS'
IMPORTING
COMPRESSED_SIZE =
TABLES
in = listobject
out = objbin
EXCEPTIONS
OTHERS = 1
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'TABLE_COMPRESS'.
ENDIF.
ENDIF.
Header Data
Already Done Thru FM
Main Text
Already Done Thru FM
Packing Info For Text Data
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'TXT'.
APPEND objpack.
Packing Info Attachment
att_type = whatatt_type..
DESCRIBE TABLE objbin LINES tab_lines.
READ TABLE objbin INDEX tab_lines.
objpack-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = att_type.
objpack-obj_name = 'ATTACHMENT'.
objpack-obj_descr = whatname.
APPEND objpack.
Receiver List
Already done thru fm
ENDFORM. "ml_prepare
FORM
FORM ml_dosend.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = docdata
put_in_outbox = 'X'
commit_work = 'X' "used from rel. 6.10
IMPORTING
SENT_TO_ALL =
NEW_OBJECT_ID =
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
CONTENTS_HEX = objhex
OBJECT_PARA =
object_parb =
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8
IF sy-subrc <> 0.
MESSAGE ID 'SO' TYPE 'S' NUMBER '023'
WITH docdata-obj_name.
ENDIF.
ENDFORM. "ml_customize
FORM
FORM ml_spooltopdf USING whatspoolid.
DATA : pdf LIKE tline OCCURS 0 WITH HEADER LINE.
Call Function
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = whatspoolid
TABLES
pdf = pdf
EXCEPTIONS
err_no_otf_spooljob = 1
OTHERS = 12.
Convert
PERFORM doconv TABLES pdf objbin.
ENDFORM. "ml_spooltopdf
FORM
FORM doconv TABLES
mypdf STRUCTURE tline
outbin STRUCTURE solisti1.
Data
DATA : pos TYPE i.
DATA : len TYPE i.
Loop And Put Data
LOOP AT mypdf.
pos = 255 - len.
IF pos > 134. "length of pdf_table
pos = 134.
ENDIF.
outbin+len = mypdf(pos).
len = len + pos.
IF len = 255. "length of out (contents_bin)
APPEND outbin.
CLEAR: outbin, len.
IF pos < 134.
outbin = mypdf+pos.
len = 134 - pos.
ENDIF.
ENDIF.
ENDLOOP.
IF len > 0.
APPEND outbin.
ENDIF.
ENDFORM. "doconv
CODE FOR PROGRAM
5.
REPORT zam_temp147 .
INCLUDE zami_inclfor_mail.
DATA
DATA : itab LIKE tline OCCURS 0 WITH HEADER LINE.
DATA : file_name TYPE string.
data : path like PCFILE-PATH.
data : extension(5) type c.
data : name(100) type c.
SELECTION SCREEN
PARAMETERS : receiver TYPE somlreci1-receiver lower case.
PARAMETERS : p_file LIKE rlgrap-filename
OBLIGATORY.
AT SELECTION SCREEN
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CLEAR p_file.
CALL FUNCTION 'F4_FILENAME'
IMPORTING
file_name = p_file.
START-OF-SELECTION
START-OF-SELECTION.
PERFORM ml_customize USING 'Tst' 'Testing'.
PERFORM ml_addrecp USING receiver 'U'.
PERFORM upl.
PERFORM doconv TABLES itab objbin.
PERFORM ml_prepare USING 'X' extension name.
PERFORM ml_dosend.
SUBMIT rsconn01
WITH mode EQ 'INT'
AND RETURN.
FORM
FORM upl.
file_name = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = file_name
filetype = 'BIN'
TABLES
data_tab = itab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
path = file_name.
CALL FUNCTION 'PC_SPLIT_COMPLETE_FILENAME'
EXPORTING
complete_filename = path
CHECK_DOS_FORMAT =
IMPORTING
DRIVE =
EXTENSION = extension
NAME = name
NAME_WITH_EXT =
PATH =
EXCEPTIONS
INVALID_DRIVE = 1
INVALID_EXTENSION = 2
INVALID_NAME = 3
INVALID_PATH = 4
OTHERS = 5
ENDFORM. "upl
regards,
amit m.

Send mail to Outlook distribution list

Hi,
I am using SO_DOCUMENT_SEND_API1 function module to send e-mail . I have a e-mail id which is group id in Outlook. This has 5 email ids inside the group.
When I am sending mail tho that group id , its not distributing my e-mail to e-mail ids inside the group id.
Can you please let me know , how I can achieve sending of mail to all e-mails ids inside a group id?
Thanks,
Madhura

Hi ,
I tried with using REC_TYPE 'C' . But I did not see any entry for that e-mail triggerred in SOST , also not in my e-mail box.
Do I have to do any other setting in combination to REC_TYPE?
If I send e-mail on indivisual email id, I receive it but not through group id.
Kindly help.
Thanks,
Madhura Nadgauda

Sending Mail to Outlook from workflow approval

Hi All,
A standard workflow is trigering in when we click on FOR APPROVAL button in IMA11 (Appropriation Request in IM Module).
I need to send send mail to OUTLOOK with workitem for approve directly from the OUTLOOK. Is it possible.
Suppose , we have 5 approval levels.
By standard workflow , If the 2nd person approve the request , work item is going to the 3rd person SAP Inbox.
I also need, If the 2nd person approve the request , need to send a mail to the 1st person also.
How can I get this?
Plz write ur comments.
Thanks

Hi,
In SBWP transaction goto setting->office settings-Automatic forwarding-create new---give mail id in forward to and select external address.
In SWDD use send mail.
Recipient type Organizational object
User Name_of_the_user
Also from insert expression you can enter work item id.
Also while creating above use using SU01 enter e-mail address which you have entered in forward to.

Function module for sending email

Hi all,
Can I know list of function modules for sending emails.
Other than "SO_DOCUMENT_SEND_API1"
pls let me know

Hi Praveen,
Below is the sample code to send the external mail.
&**********Reward Points if helpful**********&
DATA: ld_mtitle LIKE sodocchgi1-obj_descr,
        ld_format TYPE so_obj_tp ,
        ld_attdescription TYPE so_obj_nam ,
        ld_attfilename TYPE so_obj_des .
       ld_receiver LIKE sy-subrc.
DATA:   it_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
          it_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,
          it_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
          w_cnt TYPE i,
          w_sent_all(1) TYPE c,                             "#EC NEEDED
          w_doc_data LIKE sodocchgi1.
REFRESH it_receivers . CLEAR it_receivers .
IF v_trip_send = 'X'.
    it_receivers-receiver = it_trip_dload-approver_email .
ELSE .
    it_receivers-receiver = it_adv_dload-approver_email .
ENDIF.
it_receivers-rec_type = c_u .
APPEND it_receivers. CLEAR it_receivers.
it_receivers-receiver = " ------> pass your reciever email id.
IF v_trip_send = 'X' .
    it_receivers-receiver = it_trip_dload-requester_email .
ELSE .
    it_receivers-receiver = it_adv_dload-requester_email .
ENDIF .
it_receivers-rec_type = c_u .
it_receivers-copy     = 'X' .
APPEND it_receivers. CLEAR it_receivers.
ld_mtitle = p_mtitle.
ld_format              = p_format.
ld_attdescription      = p_attdescription.
ld_attfilename         = p_filename.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = c_saprpt.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
     ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name   = c_saprpt.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = c_f.
CLEAR it_attachment.
REFRESH it_attachment.
it_attachment[] = it_attach[].
Describe the body of the message
CLEAR it_packing_list.
REFRESH it_packing_list.
it_packing_list-transf_bin = space.
it_packing_list-head_start = 1.
it_packing_list-head_num = 0.
it_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES it_packing_list-body_num.
it_packing_list-doc_type = c_raw.
APPEND it_packing_list.
Create attachment notification
it_packing_list-transf_bin = c_x.
it_packing_list-head_start = 1.
it_packing_list-head_num   = 1.
it_packing_list-body_start = 1.
DESCRIBE TABLE it_attachment LINES it_packing_list-body_num.
it_packing_list-doc_type   = ld_format.
it_packing_list-obj_descr = ld_attdescription.
it_packing_list-obj_name   = ld_attfilename.
it_packing_list-doc_size   = it_packing_list-body_num * 255.
APPEND it_packing_list.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
    EXPORTING
      document_data = w_doc_data
      put_in_outbox = c_x
      commit_work   = c_x
    IMPORTING
      sent_to_all   = w_sent_all
    TABLES
      packing_list = it_packing_list
      contents_bin = it_attachment
      contents_txt = it_message
      receivers     = it_receivers.

Function module to sen mail

Hi,
Does anyone know a function module to send a mail with an attached file when SAP Connect is active ?
Thanks,
Paulo Sousa

DATA: loc_maildata LIKE sodocchgi1.
DATA: loc_mailtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE.
DATA: loc_mailrec LIKE somlrec90 OCCURS 0 WITH HEADER LINE.
DATA: loc_list TYPE TABLE OF abaplist WITH HEADER LINE.
DATA: loc_ascilines(1024) TYPE c OCCURS 0 WITH HEADER LINE.
DATA: loc_htmllines TYPE TABLE OF w3html WITH HEADER LINE.
DATA: loc_spool_number TYPE tsp01-rqident.
DATA: loc_spool_key    TYPE tsp01-rqtitle.
DATA: loc_itab TYPE TABLE OF string.
DATA: loc_line LIKE loc_mailtxt-line.
CLEAR: loc_maildata, loc_mailtxt, loc_mailrec.
REFRESH: loc_mailtxt, loc_mailrec.
loc_maildata-obj_name = 'TEST'.
loc_maildata-obj_descr = 'Test Subject'.
loc_mailtxt-line = wf_line.
APPEND loc_mailtxt.
loc_mailrec-receiver = wf_email.
loc_mailrec-rec_type = 'U'.
APPEND loc_mailrec.
CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
    EXPORTING
      document_data              = loc_maildata
      document_type              = 'RAW'
      put_in_outbox              = 'X'
    TABLES
      object_header              = loc_mailtxt
      object_content             = loc_mailtxt
      receivers                  = loc_mailrec
    EXCEPTIONS
      too_many_receivers         = 1
      document_not_sent          = 2
      document_type_not_exist    = 3
      operation_no_authorization = 4
      parameter_error            = 5
      x_error                    = 6
      enqueue_error              = 7
      OTHERS                     = 8.
IF sy-subrc = 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
COMMIT WORK.
WAIT UP TO 2 SECONDS.
SUBMIT rsconn01 WITH mode = 'INT'
               WITH output = 'X'
                          AND RETURN.

Sending mail to outlook from workflow

Hi All,
I tried to send a mail to outlook from workflow by giving the email address in the step mail, but it was not working.
i am getting the workitem in the sap inbox so tried setting the automating forward which we can forward from the sap inbox to outlook.
Searched in SDN , but my issue was not solved..
Could you please help me out with this issue to get the mail from workflow to outlook inbox.
Thanks,
Praveena

Hi Praveena
see the threads,similar to you
Sending mails from SAP inbox to Outlook
Workflow - Sending mail to Outlook
For more inforamtion you can search a lot about sending mails to outlook in SCN
regards
Sachin
Edited by: sachin sharma on Feb 27, 2009 11:44 AM

Issue sending mail to outlook?

Hi,
I need to map some users in CC list of mail when sending mail to outlook.
Where i can achieve that with in workflow development?
Thanks

Hi,
Using this FM SO_NEW_DOCUMENT_SEND_API1 you can send in the RECEIVERS you have to assign as below.
RECEIVERS-COPY = 'X' u201C Carbon Copy (CC)
RECEIVERS-BLIND_COPY = 'X' u201C Blind Carbon Copy (BCC)
1) You have to create a Method in the BO to send Mail using this FM SO_NEW_DOCUMENT_SEND_API1 and assign as shown above.
2) Then call this Method in the Workflow via Task.
Regards,
Surjith

Can't "send" mail in Outlook Web App

Firefox version 34 on Ubuntu Linux 12.04
Several users cannot "send" email using the Outlook Web App. I'm in the process of contacting Microsoft to see if the problem is on their end. The "send" button works fine in Chrome.
I've tried:
-Using the keyboard shortcut (Alt-S)
-Restarting firefox with addons disabled
-Changing the zoom level
-Tried in Private mode
-Tried using the popout window to compose and send
-Tried disabling the proxy (does not work with or without the proxy)
I've noticed that after creating a new message, no draft is saved. Cannot send with a new message or when replying.

Did you realize this is a forum for MacBook Pro's? Outlook is a Microsoft product that only runs on MS Windows. Perhaps you could provide more information such as:
I am running Windows XP, Vista, Win 7 under Boot Camp and am attempting to send mail using Outlook. I am running into the following problems........ and then tell more about how you have set up Outlook, what issues you are having and what troubleshooting steps you have taken.
At any rate if you are using Boot Camp, Fusion, Parallel's etc.. your best bet is to begin posting in those forums. This is a forum for MacBook Pro's 2008 or later. You can find the Boot Camp forum at:
http://discussions.apple.com/category.jspa?categoryID=237
Regards,
Roger

Function module to send mails to outlook

Similar Messages

Maybe you are looking for