Function module to update a database table

please give me the name of the function module which will update a hr table from an infotype.

Hi,
The FM 'HR_INFOTYPE_OPERATION' is used to update the HR infotype.
U can lock the pernr using 'BAPI_EMPLOYEE_ENQUEUE' FM. After that, u can unlock it using 'BAPI_EMPLOYEE_DEQUEUE' .
see this sample code...
CALL FUNCTION 'BAPI_EMPLOYEE_ENQUEUE'
EXPORTING
NUMBER = P2013-pernr
IMPORTING
RETURN = wf_returne.
Test Mode
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
EXPORTING
INFTY = '2013'
NUMBER = P2013-PERNR
SUBTYPE = P2013-SUBTY
OBJECTID = P2013-OBJPS
LOCKINDICATOR = P2013-SPRPS
VALIDITYEND = P2013-ENDDA
VALIDITYBEGIN = P2013-BEGDA
RECORDNUMBER = P2013-SEQNR
RECORD = P2013
OPERATION = 'INS'
TCLAS = 'A'
DIALOG_MODE = '0'
NOCOMMIT = 'X'
IMPORTING
RETURN = wf_return.
CALL FUNCTION 'BAPI_EMPLOYEE_DEQUEUE'
EXPORTING
NUMBER = P2013-PERNR.
Reward points if useful
Cheers,
Shanthi.
Edited by: shanthi ps on Jan 29, 2008 5:24 AM

Similar Messages

  • Function module for updating vendor:ADRC table

    Hi all,
    Please guide me how to update the database ADRC with using function module.
    I need to use this function module in IDOC inbound.
    Thanks.

    I am not sure about dependent database tables....but definitely the following BAPI will update dependent database tables also...
    BAPI_ADDRESSORG_CHANGE
    Refer the below link for using this BAPI...or search in SCN..
    http://abap.wikiprog.com/wiki/BAPI_ADDRESSORG_CHANGE

  • Rfc enabled function module for the updating the database table

    Hi,
            I need one rfc enabled function module for the updating the database table from the legacy system.currently i am using the rfc_read_table to read the database table.similarly i need for the update.

    Hi
    I believe you need to create one by yourself
    Max

  • Bapi Or Function Module for Updating a table

    Can u Plz let me know , is there any bapi or function module to update few fields of a standard table using an internable.

    Hi Shiva Kumar Tirumalasetty ,
         There is no FM / BAPI to update directly to any SAP tables . SAP won't suggests to develop a FM/BAPI like that , as it will cause some data inconsistency problem .
    We have to search and find BAPI's/ FM's for requirement specific if not exists then need to think about the alternate options (LSMW/ BDC etc..)
    Hope this answers your question.
    Thanks,
    Greetson

  • Bapi function module to update PRPS table

    Hi ,
    Presently i have a requirement which needs to update some data from ZIOS table  into PRPS table. Can any one tell me what is the Bapi function module for updating data into PRPS table.
    <REMOVED BY MODERATOR - REQUEST OR OFFER POINTS ARE FORBIDDEN>
    Thanks,
    Satish Raju
    Edited by: Alvaro Tejada Galindo on Jan 12, 2010 11:46 AM

    These ZZ fields are specific to your application, use the EXTENSION parameters.
    Look in BAPI_PS_INITIALIZATION documentation, there is an explanation how-to fill specific fields.
    For the BAPIs used to create and change project definitions, WBS       
    elements, networks, activities, and activity elements, you can         
    automatically fill the fields of the tables PROJ, PRPS, AUFK, and AFVU 
    that have been defined for customer enhancements in the standard system.
    For this purpose, help structures that contain the respective key      
    fields, as well as the CI include of the table are supplied. The BAPIs 
    contain the parameter ExtensionIN in which the enhancement fields can be
    entered and also provide BAdIs in which the entered values can be      
    checked and, if required, processed further.                           
    CI Include  Help Structure                      Key                  
    CI_PRPS     BAPI_TE_WBS_ELEMENT                 WBS_ELEMENT
    Procedure for Filling Standard Enhancements                                                                               
    Before you call the BAPI for each object that is to be created or     
    changed, for which you want to enter customer-specific table enhancemen
    fields, add a data record to the container ExtensionIn:                                                                               
    o   STRUCTURE:    Name of the corresponding help structure                                                                               
    +o   VALUEPART1:   Key of the object + start of the data part+                                                                               
    o   VALUEPART2-4: If required, the continuation of the data part                                                                               
    VALUPART1 to VALUPART4 are therefore filled consecutively, first with 
    the keys that identify the table rows and then with the values of the 
    customer-specific fields. By structuring the container in this way, it
    is possible to transfer its content with one MOVE command to the      
    structure of the BAPI table extension.                                                                               
    Note that when objects are changed, all fields of the enhancements are
    overwritten (as opposed to the standard fields, where only those fields
    for which the respective update indicator is set are changed).        
    Therefore, even if you only want to change one field, all the fields  
    that you transfer in ExtensionIn must be filled.                      
    You have to use these parameters in BAPI_BUS2054_GETDATA as well as in BAPI_BUS2054_CHANGE_MULTI.
    Regards

  • Any Bapi or function Module to update standard table

    Can u Plz let me know , is there any bapi or function module to update few fields of a standard table using an internable.

    I don't know if any FM exists for your requirement. But you may like to copy it into a custom table and modify it according to your enterprise needs.

  • Function module to update the values in STPO table :   VERY URGENT!!!!!!!!!

    Hi All,
    Can any one tell me is there any Remote function module to update the values of components in STPO table while creating Sales order BOM, Material BOM, and WBS BOM. For example I want to update the Spare Part Indicator for Item components based on Plant.
    Please do the needful..
    Regards
    Yathish

    For material bom: CSAP_MAT_BOM_CREATE
    and CSAP_ORD_BOM_CREATE for Order BOM.
    Regards,
    Ravi

  • Function module for updating COBRB table

    Hi,
    Is there any function module to update the entries in COBRB table.
    I have already tried the following but it's not updating ithe entries:
    1) k_settlement_rule_fill : get the objnr from PRPS and use it for CORBA and COBRB
    2)  k_settlement_rule_delete :  using  objnr only
    3) k_posting_rule_insert
    Regards
    Prabhat

    Hi,
    Please check this FM K_SETTLEMENT_RULES_UPDATE.
    Check FM AUC_SETTLEMENT_POST for sample codes.
    Regards,
    Ferry Lianto

  • Need BAPI or Function Module to update MAEX Table

    Hi Experts !!
    I need to update the MAEX table in mass level through a batch job.
    Updating the table directly is not recommended. So, a BAPI or a FM would have helped.
    One more thing, if I update it through a BAPI or FM, will the change history log in MM02 or MM03 be maintained automatically by SAP ?
    Also if I directly update the MAEX table, how to maintain the change history log ?
    Below are the fields which I want to update.

    Those FM are update FM (check with SE37) called at end of transaction after checking data validity and must not be called alone in a customer program, using those FM is not better than direct SQL update of database (or you actually want to duplicate SAP standard checking and find every update FM to call, wrong idea usually)
    Read also 1710449 - Transaction MM17 (Mass Change) or BAPI BAPI_MATERIAL_SAVEDATA does not support update on database table MAEX. So nowadays the correct solution is the use of Batch Input
    Regards,
    Raymond

  • Calling Function Module in Update Task

    Hello Experts,
                              Can anyone let me know about
    Calling Function Module in Update Task.
    Why do we use this " In Update Task "  ??
    How do we Use ??
    What is the Use... ??
    Kindly let me know....
    Thanks and Regards
    Pramod

    hi,
    Why do we use this " In Update Task " ??
    The main update technique for bundling database changes in a single database LUW is to use CALL FUNCTION... IN UPDATE TASK.
    How do we Use ??
    A typical R/3 installation contains dialog work processes and at least one update work process. The update work processes are responsible for updating the database. When an ABAP program reaches a COMMIT WORK statement, any function modules from CALL FUNCTION... IN UPDATE TASK statements are released for processing in an update work process. The dialog process does not wait for the update to finish. This kind of update is called asynchronous update.
    What is the Use... ??
    Asynchronous update is useful when response time from the transaction is critical, and the database updates themselves are so complex that they justify the extra system load
    Real time scenario.
    Suppose a user wants to change an entry in a database table, or add a new one. He or she enters the necessary data, and then starts the update process by choosing Save. This starts the following procedure in the ABAP program:
    Firstly, the program locks the database entry against other users, using the enqueue work process (or the message server in the case of a distributed system). This generates an entry in the lock table. The user is informed whether the update was successful, or whether the lock could not be set because of other users.
    If the lock is set, the program reads the entry that is to be changed and modifies it. If the user has created a new entry, the program checks whether a record with the same key values already exists.
    In the current dialog work process, the program calls a function module using CALL FUNCTION... IN UPDATE TASK, and this writes the change details as an entry in table VBLOG.
    When the program is finished (maybe after further dialog steps), a COMMIT WORK statement starts the final part of the SAP LUW. The work process that is processing the current dialog step starts an update work process.
    Based on the information passed to it from the dialog work process, the update work process reads the log entries belonging to the SAP LUW from table VBLOG.
    The update work process passes this data to the database for updating, and analyzes the return message from the database. If the update was successful, the update work process triggers a database commit after the last database change and deletes the log entries from table VBLOG.
    If an error occurred, the update work process triggers a database rollback, leaves the log entries in table VBLOG, flags them as containing errors, and sends a SAPoffice message to the user, who should then inform the system administrator.
    The corresponding entries in the lock table are reset by the update work process.
    Hope this is helpful, Do reward.

  • Field value is getting double while updating the database table

    Hi Experts,
    A simple doubt :
    there is a standard program through which a zfunction module is getting triggered, through this zfunction module i am updating the database table.
    Now what happening is one of the field(KCQTY) value in database is getting double at a time when i am executing the Program with same variant only.
    I have also done the CLEAR & REFRESH internal tables starting of the Function module.
    Can you please help me out.
    Max points wil be awarded.
    thanks
    rico.

    Hi Nicole,
    this is the part of the coding where you can see how the field KCQTY is getting moved in the loop statement.
      DELETE IT_CE20002B_815 WHERE
          KONDA = SPACE  OR
          WERKS = SPACE  OR
          VVB01001 < 0.
        LOOP AT IT_CE20002B_815.
          INDX = SY-TABIX.
          CONCATENATE IT_CE20002B_815-PERBL0(4) IT_CE20002B_815-PERBL5(2)
                                                    INTO MONAT.
       MOVE itab_ce20001b-perbl TO monat.
          CLEAR S815.
          READ TABLE IT_ZPL_MCS5 WITH KEY KONDA = IT_CE20002B_815-KONDA
                                           BINARY SEARCH.
            SELECT SINGLE * FROM S815 WHERE VRSIO = '000'
                                         AND SPMON = MONAT
                                         AND KONOB = 'APO'
                                         AND MVGR2 = IT_CE20002B_815-KONDA
                                         AND PRODH = IT_CE20002B_815-PRDHA
                                         AND WERKS = IT_CE20002B_815-WERKS.
                                        AND VTWEG EQ CO_VTWEG_99.
    BREAK SAMEE.
          IF SY-SUBRC EQ 0.
    Eintrag in S810 existiert
            IF S815-AEMENGE <= IT_CE20002B_815-VVB01001.
    wenn die Auftragseingangsmenge kleiner gleich der Kontingentsmenge
    wird die Kontingentmenge in das Steploop übernommen
              MOVE IT_CE20002B_815-VVB01001 TO  W_T_DATA_815-KCQTY.
    *Liste ausgeben
             PERFORM AUSGABE4.
              PERFORM AUSGABE4_815.
            ELSE.
    Ausgabe Fehlermeldung, wenn die Auftragsmenge größer als die
                           Kontingentmenge ist.
    *Liste mit fehlermeldungen ausgeben, Kontingent trotzdem übernehmen
              MOVE IT_CE20002B_815-VVB01001 TO  W_T_DATA_815-KCQTY.
             PERFORM AUSGABE_FEHLER4.
              PERFORM AUSGABE_FEHLER4_815.
            delete it_ce20002b index indx.
            continue.
            ENDIF.
          ELSE.
    Es existiert kein Eintrag in S810, dann direkt eingeben
            MOVE IT_CE20002B_815-VVB01001 TO W_T_DATA_815-KCQTY.
            MODIFY IT_CE20002B_815 INDEX INDX.
    *Liste ausgeben (Kein Eintrag in S810)
           PERFORM EINTRAG2.
            PERFORM EINTRAG2_815.
          ENDIF.
    *Übergabestructur für die Weiterverarbeitung durch das Copymanagement
    *im Functionsbaustein wird gefüllt.
          W_T_DATA_815-SPMON = MONAT.   "itab_ce20001a-perbl.
          W_T_DATA_815-KONOB = CO_KONOB_APO.
          READ TABLE IT_ZPL_MCS5 WITH KEY KONDA = IT_CE20002B_815-KONDA
                                          BINARY SEARCH.
          IF SY-SUBRC EQ 0.
            W_T_DATA_815-MVGR2 = CO_MVGR2_999.
          ELSE.
            W_T_DATA_815-MVGR2 = IT_CE20002B_815-KONDA.
          ENDIF.
          W_T_DATA_815-WERKS = IT_CE20002B_815-WERKS.
          W_T_DATA_815-PRODH = IT_CE20002B_815-PRDHA.
         W_T_DATA_815-VTWEG = '99'.
         W_T_DATA_815-KUNNR = '9999999999'.
          W_T_DATA_815-KCQTY = IT_CE20002B_815-VVB01001.
          W_T_DATA_815-BASME = IT_CE20002B_815-VVB01_ME.
    JR181005 - begin of ins.
         w_t_data_810-matkl = it_ce20002b-matkl.
    JR181005 - end of ins.
          APPEND W_T_DATA_815 TO TAB_DATA.
          CLEAR IT_CE20002B_815.
        ENDLOOP.
    thanks for reply
    rico

  • Update a database table "j_2iaccbal"

    Hi experts,
    I want to update a database table " J_2IACCBAL" .The reason is,
    In this table one field value is wrongly entered (field name is OP_BAL ) for the month of april 2010.
    how to update this value (through update statement not possible) .I know through BAPI it is possible.
    But i don't the BAPI concept .pls give me the syntax (if possible sdn link).
    pls help me in this .I am a basic abaper.

    Hi Ram,
    You should always avoid updating any database table with direct select statement. This is very important from the SAP Transactional Concept. Let this updating, deleting and inserting of data be handled by the database layer. Also, the database interaction is handled by the Update Modules.
    The BAPI Concept of SAP - Have a look at the following link - [SAP BAPI|http://help.sap.com/saphelp_bw/helpdata/en/a5/3ec8464ac011d1894e0000e829fbbd/content.htm]
    The BAPI's are function modules which can also be used inside SAP System. They are created specially created to handle all the database transactional concepts.You can search for the Function Modules in the system using the where used list.
    Hope this will help you.
    Thanks,
    Samantak.

  • Problem while updating a database table

    Hi experts,
                         I've used the FM 'HR_INFOTYPE_OPERATION' to update the database table. In that i used the MOD operation to update the Infotype PA0315.  But it return an error message like "Infotype does not exist". What could be the reason for this error?.
    regards,
    Shanthi.

    Hi,
          Here is my code for updation.
    CALL FUNCTION 'BAPI_EMPLOYEE_ENQUEUE'
    EXPORTING
    NUMBER = P0315-pernr
    IMPORTING
    RETURN = wf_returne.
    Update Mode
    CALL FUNCTION 'HR_INFOTYPE_OPERATION'
    EXPORTING
    INFTY = '0315'
    NUMBER = P0315-PERNR
    SUBTYPE = P0315-SUBTY
    OBJECTID = P0315-OBJPS
    LOCKINDICATOR = P0315-SPRPS
    VALIDITYEND = P0315-ENDDA
    VALIDITYBEGIN = P0315-BEGDA
    RECORDNUMBER = P0315-SEQNR
    RECORD = P0315
    OPERATION = 'MOD'
    TCLAS = 'A'
    DIALOG_MODE = '0'
    IMPORTING
    RETURN = wf_return.
    Dequeue
    CALL FUNCTION 'BAPI_EMPLOYEE_DEQUEUE'
    EXPORTING
    NUMBER = P0315-PERNR.

  • Creation of function module for updating the ztable

    Hi,
    I am sending the requirement for ceation of function module for updating the ztable.
    Requirement----
    Table Updation rule (New record)
    While creating a new record the calling function will export the following to the table handling function.
    Table field     Probable Values
    ZORDERNO------->     Sales Delivery no in case of sales orderShipment no in case of transfer order
    UNAME----
    >     User ID
    ZORDTYPE----
    >     SALEOR in case of sales orderTRANSF in case of transfer order
    ZREFDOCNO----
    >Sales Order no in case of sales orderPurchase Order no in case of transfer order
    ZREFDOCNO1----
    >Delivery no in case of transfer order
    The table handling function will calculate the following fields
    Table field     Probable Values
    ZREQNO----
    >Running serial number (incremented by 1 for each new record)
    ZREQDAT     -
    >System date
    ZREQTIME----
    >     System time
    ZSTATUS----
    >OPEN (for all new records)
    Before inserting a new record the table handling function will always check if a previous record exists for the same order / shipment no. if record exists the function will not insert a new record.
    Table Updation rule (Status Update)
    While updating a record the calling function will export the following to the table handling function.
    Table field     Probable Values
    ZORDERNO----
    >Sales order no in case of sales orderShipment no in case of transfer order
    ZSTATUS----
    >CANCEL if cancellation successfulERROR if cancellation not possible (order already processed)
    The table handling function will calculate the following fields
    Table field     Probable Values
    ZSTATDAT----
    >System date
    ZSTATTIME----
    >     System time

    Do you have to create/update new record in Ztable through Function Module ?
    or you need to write FM only for validation?
    Any how, you need to create a Program with Input values for the fields of Ztable, and for rest of fields the Value can be calculated based on input as per your requirement.
    Let me know clearly what exactly u need ?
    Regards,
    Kiran

  • Standard Function modules to update customer partner

    Hi,
    Can anyone please suggest standard function modules to update customer partner functions?
    Was looking at Customer_insert, customer_update, CUSTOMER_UPDATE_SALES_AREA.
    I will have only the partner data in the customser sales view to get updated. I dont need the company data.
    Awaiting some insightful inputs please.
    Thanks,
    Satheesh

    FM and TABLES
    http://72.14.235.104/search?q=cache:71IXBMWcX_8J:reflexcontracts.co.uk/SAP_R3_QUICK_REF.xlsupdatetable+tse05&hl=en&ct=clnk&cd=1&gl=in
    FUNCTION MODULES
    http://www.erpgenie.com/abap/functions.htm
    http://www.sapdevelopment.co.uk/fmodules/fmssap.htm
    http://www.erpgenie.com/abap/index.htm
    http://www.geocities.com/victorav15/sapr3/abapfun.html
    Rewards if useful.........
    Minal

Maybe you are looking for