Function module to update Credit status in Delivery
Hi,
Is there any function module or BAPI to update the Credit status for Delivery (Outbound) in transaction VL02N.
Hi Priyanka,
This BAPI " BAPI_CREDIT_ACCOUNT_GET_STATUS " will give the required solution.it determines credit status of credit account.
by
Prasad GVK.
Similar Messages
-
Functional module to update claim status
Hi,
What is the functional module to update the claim status & technical key name of each status in claims & reimbursement.
Thanks,
Snita ShawHi Snita,
Check for the functional module - HRPBSINCLAIMS_CLS_READ_CTH and here the process would be where the employee raises a request in ESS and after the approval the report ,
1. HRPBSIN_AC_INFU - Advanced Claims: Infotype Update Report will be executed for the updation of details in ECC and even after the updation this report will be executed to update the approval status of the claim.
2. HRPBSIN_AC_ACRP - Advanced Claims: Display Records this report can be used to the display the request and also the adminsitrator can change the approver if needed.
Regards,
Mithun K -
Function Module to update Serial Numbers in Delivery
Hello there,
I am attempting to update serial numbers in an outbound delivery using function module SERNR_ADD_TO_LS followed by a perform of serial_liste_post_ls IN PROGRAM saplipw1. However I am struggle with error messages of inconsistancies in status management of the serial numbers. I have verified that the serial numbers I'm using are valid and available. Has anyone had any experience with this FM or others to post serial numbers into an outbound delivery?
Many thanks!That is very helpful and turns out to be true, the delivery is updated with the serial numbers however LIPS is not. I have started to write a routine to correct this.
On another note in my application I'm noticing that the when I call FM serial_liste_post_ls IN PROGRAM saplipw1 that the internal tables being passed that were built in the FM SERNR_ADD_TO_LS contain serial data from all deliveries and consequently I'm getting errors.
My program loops at the delivery then the item and for each item I call the FM SERNR_ADD_TO_LS and then I call the serial_liste_post_ls IN PROGRAM saplipw1 once all lines have been passed and the first delivery updates fine. However the subsequent delivery receives an error of " Inconsitancy in status management for serial ". I have confirmed that the serials are good and when I go into debug I see the first delivery goes fine and then I noticed on the FM call of serial_liste_post_ls IN PROGRAM saplipw1 that the internal tables contains data from that delivery and the previous one.
Below is psuedo code replicating how I call the FM's
loop at i_likp.
loop at i_lips
where vbeln = i_likp-vbeln.
CALL FUNCTION 'SERNR_ADD_TO_LS'
EXPORTING
profile = 'Z002'
material = i_lips-matnr
quantity = i_lips-anzahl
j_vorgang = 'PMS3'
document = i_likp-vbeln
item = i_lips-posnr
debitor = i_likp-kunnr
vbtyp = i_lips-vgtyp
bwart = '601'
IMPORTING
anzsn = anzsn
zeilen_id = l_zeile
serial_commit = serial_commit
TABLES
sernos = sernr
EXCEPTIONS
konfigurations_error = 1
serialnumber_errors = 2
serialnumber_warnings = 3
no_profile_operation = 4
OTHERS = 5.
endloop.
PERFORM serial_liste_post_ls IN PROGRAM saplipw1.
COMMIT WORK.
endloop.
Any help is very much appreciated!!! -
Function Module to update Bill of Lading & No. of packages in a Delivery
Hi,
Can any one suggest me a function module to update Bill of Lading & No. of packages in a Delivery ?
Thanks in Advance.Hi:
I am also trying to update components of PM. I used the function CO2M_COMPONENT_CHANGE_WITH_REF, but I am not sure if I am passing the correct parameters. If possible can you please send a sample code Or you can take a look at my code and tell me where I am doing wrong.. Thanks.
Here is what I am passing into the the function:
DATA: in_resbd_new LIKE resbd,
in_rsnum_source LIKE resb-rsnum,
in_rspos_source LIKE resb-rspos,
in_rsart_source LIKE resb-rsart,
out_INDEX_BT LIKE SY-TABIX.
When I created the component, Requirement quantity of the component
was set to initial. I am trying to change that to 1.
in_resbd_new-MANDT = '200'.
in_resbd_new-RSNUM = '0000000708'. " from RESB-RSNUM
in_resbd_new-RSPOS = '0001'. " from RESB-RSPOS
in_resbd_new-MATNR = '000000000000000072'. " RESB-MATNR
in_resbd_new-WERKS = '0010'. " from RESB-WERKS
in_resbd_new-LGORT = '0010'. "" from RESB-lgort
in_resbd_new-MENGE = '1'.
in_rsnum_source = '0000000708'.
in_rspos_source = '0001'.
CALL FUNCTION 'CO2M_COMPONENT_CHANGE_WITH_REF'
EXPORTING
i_resbd_new = in_resbd_new
i_rsnum_source = in_rsnum_source
i_rspos_source = in_rspos_source
i_rsart_source = in_rsart_source
IMPORTING
E_INDEX_BT = out_INDEX_BT
EXCEPTIONS
ERROR_OCCURED = 1
OTHERS = 2
The return value in out_index_bt is '1'.
Thanks for your help. -
Function Module to update the sales order header status
Hi,
I am looking for a function module to update the Sales order header status.
Pls. let me know if anybody has used any FM to update the SO status.
Thanks,By mentioning status do you mean Object status or Document status??
For Object status you may use FM: STATUS_MAINTAIN
For document status it changes according to flow.
Regards
Eswar -
Creation of function module for updating the ztable
Hi,
I am sending the requirement for ceation of function module for updating the ztable.
Requirement----
Table Updation rule (New record)
While creating a new record the calling function will export the following to the table handling function.
Table field Probable Values
ZORDERNO-------> Sales Delivery no in case of sales orderShipment no in case of transfer order
UNAME----
> User ID
ZORDTYPE----
> SALEOR in case of sales orderTRANSF in case of transfer order
ZREFDOCNO----
>Sales Order no in case of sales orderPurchase Order no in case of transfer order
ZREFDOCNO1----
>Delivery no in case of transfer order
The table handling function will calculate the following fields
Table field Probable Values
ZREQNO----
>Running serial number (incremented by 1 for each new record)
ZREQDAT -
>System date
ZREQTIME----
> System time
ZSTATUS----
>OPEN (for all new records)
Before inserting a new record the table handling function will always check if a previous record exists for the same order / shipment no. if record exists the function will not insert a new record.
Table Updation rule (Status Update)
While updating a record the calling function will export the following to the table handling function.
Table field Probable Values
ZORDERNO----
>Sales order no in case of sales orderShipment no in case of transfer order
ZSTATUS----
>CANCEL if cancellation successfulERROR if cancellation not possible (order already processed)
The table handling function will calculate the following fields
Table field Probable Values
ZSTATDAT----
>System date
ZSTATTIME----
> System timeDo you have to create/update new record in Ztable through Function Module ?
or you need to write FM only for validation?
Any how, you need to create a Program with Input values for the fields of Ztable, and for rest of fields the Value can be calculated based on input as per your requirement.
Let me know clearly what exactly u need ?
Regards,
Kiran -
Function module to update net price in purchase information record ???
hi all,
Is there any function module to update net price (PREIS) for each material in the purchase info record?
points will be rewarded for helpful answersHi,
Use below FM :
Clear : i_prot.
refresh : i_prot.
Delivery Update
CALL FUNCTION 'LE_MOB_DELIVERY_UPDATE'
EXPORTING
do_commit = 'X'
TABLES
t_delivery_items = i_lips
prot = i_prot
EXCEPTIONS
conversion_overflow = 1
essential_data_missing = 2
error = 3
nothing_to_update = 4
lock_after_update_failed = 5
error_in_delivery_update = 6
OTHERS = 7.
COMMIT WORK.
Pass lips-lgort..
Refer
https://forums.sdn.sap.com/click.jspa?searchID=4212688&messageID=3855382
Regards -
Function module for Process order status
Hi techies,
I want to know the function module for process order status , idoc type is liopro01 and message type is liopro, my requirement is that based on the different status received in IDoc SAP should update the process order status, separate user status will be defined as "MO START" and "MO end" using status profile.also it has change the process order status to "TECO" also it should check the user status for "MO Abort".
Thanks in AdvanceHi ross,
Try this function module.
STATUS_CHECK_MULTI
May be helpful.
Lincon -
SAP provided function module to update picking confirmation in VL02N
Hi
In transaction VL02N , the quantity,net weight and batch inf is updated manually.So the question is there any SAP provided function module to update picking confirmation instead of using BDC/call transaction method?Hi,
Use below FM :
Clear : i_prot.
refresh : i_prot.
Delivery Update
CALL FUNCTION 'LE_MOB_DELIVERY_UPDATE'
EXPORTING
do_commit = 'X'
TABLES
t_delivery_items = i_lips
prot = i_prot
EXCEPTIONS
conversion_overflow = 1
essential_data_missing = 2
error = 3
nothing_to_update = 4
lock_after_update_failed = 5
error_in_delivery_update = 6
OTHERS = 7.
COMMIT WORK.
Pass lips-lgort..
Refer
https://forums.sdn.sap.com/click.jspa?searchID=4212688&messageID=3855382
Regards -
CRM function module to update the attribute in the classification TAB of BP
Hi All,
Can any body let me know if there is any functionmodule to update the CRM function module to update the attribute in the classification TAB of BP tcode.
I have searched a lot i get FM to update the marketing attribute and not the attributes in the classification tab.
Thanks in Advance
Edited by: Sharath Kumar on Dec 2, 2010 4:48 PMFor material bom: CSAP_MAT_BOM_CREATE
and CSAP_ORD_BOM_CREATE for Order BOM.
Regards,
Ravi -
HR-ABAP Any BAPI or Function module to update infotypes 167 & 170
Hi,
Can anyone let me know is there any BAPI or Function module to update infotypes 167(Health Plans) & 170(Flexible Spending Accounts).
Thanks,
SandeepHi,
U can use HR_BEN_CREATE_PLANS internally it calls HR infotype operation as specified by suresh.
Suresh : If there are approximately 3000 records to be updated on regular basis do u think is it better to use BAPI's or BDC
regards
Vick -
Function module/Webservice for Sytem status overview widget
Hi,
We want to create a "System status overview" - widget, which can show very briefly an overview of which systems are up an which are down (+ some additional backgroundinfo).
(Instead of communicating system statusses via e-mail)
Therefore we are looking for a function module/webservice which provides status info of all systems linked to Solution Manager. Does anybody knows about a standard functionality which provides this information, or does an application lik that already exists?
Thanks in advance for your replies.
Cheers,
SanderHi Mohammed,
Thanks for the reply.
That 's exactly the information we need, but we want to be able to create a simple display to the end user:
- without logging into the system
- displaying only a red or a green light/system
- information about all systems in all solutions
to put into the portal or even better, to put into a widget (I was thinking about using Adobe Air for this one).
To do so, I think there will be the need of a simple web service which returns a list of all systems toghether with their availability status...?
KR,
Sander -
Calling Function Module in Update Task
Hello Experts,
Can anyone let me know about
Calling Function Module in Update Task.
Why do we use this " In Update Task " ??
How do we Use ??
What is the Use... ??
Kindly let me know....
Thanks and Regards
Pramodhi,
Why do we use this " In Update Task " ??
The main update technique for bundling database changes in a single database LUW is to use CALL FUNCTION... IN UPDATE TASK.
How do we Use ??
A typical R/3 installation contains dialog work processes and at least one update work process. The update work processes are responsible for updating the database. When an ABAP program reaches a COMMIT WORK statement, any function modules from CALL FUNCTION... IN UPDATE TASK statements are released for processing in an update work process. The dialog process does not wait for the update to finish. This kind of update is called asynchronous update.
What is the Use... ??
Asynchronous update is useful when response time from the transaction is critical, and the database updates themselves are so complex that they justify the extra system load
Real time scenario.
Suppose a user wants to change an entry in a database table, or add a new one. He or she enters the necessary data, and then starts the update process by choosing Save. This starts the following procedure in the ABAP program:
Firstly, the program locks the database entry against other users, using the enqueue work process (or the message server in the case of a distributed system). This generates an entry in the lock table. The user is informed whether the update was successful, or whether the lock could not be set because of other users.
If the lock is set, the program reads the entry that is to be changed and modifies it. If the user has created a new entry, the program checks whether a record with the same key values already exists.
In the current dialog work process, the program calls a function module using CALL FUNCTION... IN UPDATE TASK, and this writes the change details as an entry in table VBLOG.
When the program is finished (maybe after further dialog steps), a COMMIT WORK statement starts the final part of the SAP LUW. The work process that is processing the current dialog step starts an update work process.
Based on the information passed to it from the dialog work process, the update work process reads the log entries belonging to the SAP LUW from table VBLOG.
The update work process passes this data to the database for updating, and analyzes the return message from the database. If the update was successful, the update work process triggers a database commit after the last database change and deletes the log entries from table VBLOG.
If an error occurred, the update work process triggers a database rollback, leaves the log entries in table VBLOG, flags them as containing errors, and sends a SAPoffice message to the user, who should then inform the system administrator.
The corresponding entries in the lock table are reset by the update work process.
Hope this is helpful, Do reward. -
Function module to update right optimized dso
Hi Experts,
Is there any standard function module available to insert data into the right optimized DSO from transformation routine. Or programmatically we need to do this.
Thanks in advance.Hi,
Here there are two DSO used. One to collect the corrrect records and the other to collect the error records. Which will used later for reconciliation with the business and then again loaded after the rectification.
So from the transformation of the Main DSO we need to update the error DSO (when ever any validation fails).
Let me know any function module to update the right optimized DSO.
Thanks,
Jugal.
Edited by: jugal behera on Feb 6, 2008 4:38 AM -
Standard Function modules to update customer partner
Hi,
Can anyone please suggest standard function modules to update customer partner functions?
Was looking at Customer_insert, customer_update, CUSTOMER_UPDATE_SALES_AREA.
I will have only the partner data in the customser sales view to get updated. I dont need the company data.
Awaiting some insightful inputs please.
Thanks,
SatheeshFM and TABLES
http://72.14.235.104/search?q=cache:71IXBMWcX_8J:reflexcontracts.co.uk/SAP_R3_QUICK_REF.xlsupdatetable+tse05&hl=en&ct=clnk&cd=1&gl=in
FUNCTION MODULES
http://www.erpgenie.com/abap/functions.htm
http://www.sapdevelopment.co.uk/fmodules/fmssap.htm
http://www.erpgenie.com/abap/index.htm
http://www.geocities.com/victorav15/sapr3/abapfun.html
Rewards if useful.........
Minal
Maybe you are looking for
-
Hello all - I have a Mac Mini which I am trying to connect to remotely. I don't not have a screen for the mini, but am attemping to connect it to a flat screen LCD monitor/TV thru HDMI. Problem is the screen doesn't seem to recognize the resoultion
-
After doing a Google search - when I click on a link it does not take me to the correct website. Instead it always take me to some icity webpage. How do I fix this so that Firefox takes me to the correct website that the Google search found?
-
Color compatability with projector
I recently gave a Keynote presentation with a projector. The color on the projector screen was terrible. Nobody knew how to correct it. The only thing I did was increase the brightness because it was so dark. This did nothing for the color. Any sugge
-
Router won't connect to internet, computer shows 'limited or no connectivity' message
Hi everyone, I could use some help. I have a Linksys WRT150N router that I bought a few years ago. It was working fine till about two days ago. I can't connect to the internet at all through the computer it's connected to or wirelessly on my laptop.
-
Problem using a decision making operation (if - than, if not - then)
I have a signal comming in. based on this signal the program has to make a desicion. I was trying this with the true-fase feature, but something wrong. Could you help me with this.