Function Module to Update Inbound Idoc
Please let me know is there any Function Module is there to update invound idoc to data base
Thanks
Umesh
Hi ,
Please take a look at this link which will show step by step on how to setup inbound proscessing.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
Also check this links for sample codes.
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
Hope this will help.
Regards,
Mohammed
Similar Messages
-
Function module to read inbound idoc
My requirement is:-
1) Read IDOC no's (DOCNUM) based on following selection criteria
status = 53,
Direction = 2,
Message Type : USERCLONE
UPDTIM :sy-datum
2)
Read IDoc Data table for all entries with the DOCNUM selected above.
Is there any function module to do this processing or please send any sample code to proceed.Hi,
try this
SELECT * FROM edidc INTO TABLE t_idoc_control
FOR ALL ENTRIES IN fp_docnum
WHERE docnum = fp_docnum-docnum.
if t_idoc_control[] is not initial.
CALL FUNCTION 'ALE_FTCH_DATA_SEGMENTS_OF_IDOC'
TABLES
t_idoc_control = t_idoc_control
t_idoc_data = t_idoc_data.
endif.
*reward if solved* -
How to find out the inbound function module in the extended idoc
Hi,
how to find out the inbound function module in the extended idocs
Thanks .through we41/we42 you can find the inbound function module.......
or
thorough we19(idoc test tool) ....
give the input as message type or basic idoc..
press exec...
then you can find th button on application tool bar as inbound funtion module....
from here also you can find..........
<REMOVED BY MODERATOR>
Khasimsa
Edited by: Alvaro Tejada Galindo on Apr 14, 2008 1:34 PM -
CRM function module to update the attribute in the classification TAB of BP
Hi All,
Can any body let me know if there is any functionmodule to update the CRM function module to update the attribute in the classification TAB of BP tcode.
I have searched a lot i get FM to update the marketing attribute and not the attributes in the classification tab.
Thanks in Advance
Edited by: Sharath Kumar on Dec 2, 2010 4:48 PMFor material bom: CSAP_MAT_BOM_CREATE
and CSAP_ORD_BOM_CREATE for Order BOM.
Regards,
Ravi -
Creation of function module for updating the ztable
Hi,
I am sending the requirement for ceation of function module for updating the ztable.
Requirement----
Table Updation rule (New record)
While creating a new record the calling function will export the following to the table handling function.
Table field Probable Values
ZORDERNO-------> Sales Delivery no in case of sales orderShipment no in case of transfer order
UNAME----
> User ID
ZORDTYPE----
> SALEOR in case of sales orderTRANSF in case of transfer order
ZREFDOCNO----
>Sales Order no in case of sales orderPurchase Order no in case of transfer order
ZREFDOCNO1----
>Delivery no in case of transfer order
The table handling function will calculate the following fields
Table field Probable Values
ZREQNO----
>Running serial number (incremented by 1 for each new record)
ZREQDAT -
>System date
ZREQTIME----
> System time
ZSTATUS----
>OPEN (for all new records)
Before inserting a new record the table handling function will always check if a previous record exists for the same order / shipment no. if record exists the function will not insert a new record.
Table Updation rule (Status Update)
While updating a record the calling function will export the following to the table handling function.
Table field Probable Values
ZORDERNO----
>Sales order no in case of sales orderShipment no in case of transfer order
ZSTATUS----
>CANCEL if cancellation successfulERROR if cancellation not possible (order already processed)
The table handling function will calculate the following fields
Table field Probable Values
ZSTATDAT----
>System date
ZSTATTIME----
> System timeDo you have to create/update new record in Ztable through Function Module ?
or you need to write FM only for validation?
Any how, you need to create a Program with Input values for the fields of Ztable, and for rest of fields the Value can be calculated based on input as per your requirement.
Let me know clearly what exactly u need ?
Regards,
Kiran -
HR-ABAP Any BAPI or Function module to update infotypes 167 & 170
Hi,
Can anyone let me know is there any BAPI or Function module to update infotypes 167(Health Plans) & 170(Flexible Spending Accounts).
Thanks,
SandeepHi,
U can use HR_BEN_CREATE_PLANS internally it calls HR infotype operation as specified by suresh.
Suresh : If there are approximately 3000 records to be updated on regular basis do u think is it better to use BAPI's or BDC
regards
Vick -
Function module to create Inbound delivery with reference to Purchase Order
Hi experts,
I want to create Inbound delivery with refernce to Purchase Order. But I want to create item wise. For example If one purchase order is there with 10 line items. 10, 20, 30, 40, 50......100.
If I am showing report for Purchase Order with select option and if I select first 5 line items 10, 20, 30, 40, 50 then my program should be create one Inbound delivery for selected line items only. I have tried BDC for Tcode VL31N, but its not worked. Is there any Function module to create Inbound delivery with reference to Purchase Order for selected line items????????Hi,
Try FM RV_DELIVERY_CREATE or GN_DELIVERY_CREATE.
For creating a delivery wrt PO u 1st need to have a sales order i guess.
Regards,
Amit -
Calling Function Module in Update Task
Hello Experts,
Can anyone let me know about
Calling Function Module in Update Task.
Why do we use this " In Update Task " ??
How do we Use ??
What is the Use... ??
Kindly let me know....
Thanks and Regards
Pramodhi,
Why do we use this " In Update Task " ??
The main update technique for bundling database changes in a single database LUW is to use CALL FUNCTION... IN UPDATE TASK.
How do we Use ??
A typical R/3 installation contains dialog work processes and at least one update work process. The update work processes are responsible for updating the database. When an ABAP program reaches a COMMIT WORK statement, any function modules from CALL FUNCTION... IN UPDATE TASK statements are released for processing in an update work process. The dialog process does not wait for the update to finish. This kind of update is called asynchronous update.
What is the Use... ??
Asynchronous update is useful when response time from the transaction is critical, and the database updates themselves are so complex that they justify the extra system load
Real time scenario.
Suppose a user wants to change an entry in a database table, or add a new one. He or she enters the necessary data, and then starts the update process by choosing Save. This starts the following procedure in the ABAP program:
Firstly, the program locks the database entry against other users, using the enqueue work process (or the message server in the case of a distributed system). This generates an entry in the lock table. The user is informed whether the update was successful, or whether the lock could not be set because of other users.
If the lock is set, the program reads the entry that is to be changed and modifies it. If the user has created a new entry, the program checks whether a record with the same key values already exists.
In the current dialog work process, the program calls a function module using CALL FUNCTION... IN UPDATE TASK, and this writes the change details as an entry in table VBLOG.
When the program is finished (maybe after further dialog steps), a COMMIT WORK statement starts the final part of the SAP LUW. The work process that is processing the current dialog step starts an update work process.
Based on the information passed to it from the dialog work process, the update work process reads the log entries belonging to the SAP LUW from table VBLOG.
The update work process passes this data to the database for updating, and analyzes the return message from the database. If the update was successful, the update work process triggers a database commit after the last database change and deletes the log entries from table VBLOG.
If an error occurred, the update work process triggers a database rollback, leaves the log entries in table VBLOG, flags them as containing errors, and sends a SAPoffice message to the user, who should then inform the system administrator.
The corresponding entries in the lock table are reset by the update work process.
Hope this is helpful, Do reward. -
Function Module to create Outbound IDoc
I have created a segment (ZSEGPRO), basic type (ZIDOCPRO) and message type (ZMSGPRO) to create a custom IDoc. Now I have to write a Function Module to create Outbound IDoc.
I want to know what will be in Import, Export, Changing, Tables, Exceptions and Source code of that function module. The fields used in the segment ZSEGPRO is given below:
Fld NameSource Data Elmn Description
PRODUCT MARA MATNR Material number
TEXT MAKT MAKTX Material description
PRN MARA YYBCEZNDR Print Field
Additional information: Export parameter will be BAPIRETURN for holding error message(if any).
These Function Module need not require to be RFC enabled.Hi ,
Refer these:
There are two main reasons
1) Make sure you call COMMIT WORK after the MASTER_IDOC_DISTRIBUTE
http://help.sap.com/saphelp_nw04/helpdata/en/78/21783151ce11d189570000e829fbbd/content.htm
2) The rest of the setting of the ALE IDoc might not have been done
http://help.sap.com/saphelp_46c/helpdata/en/78/2177c951ce11d189570000e829fbbd/frameset.htm
You can use the Area Menu WEDI and do the rest of the settings.
ALE Quick Start guide and ALE Programming Guides for your reference
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf
Recent discussion which could be helpful,
About WE21, BD64, sm59
Regards
Shiva Kumar -
Function module to update right optimized dso
Hi Experts,
Is there any standard function module available to insert data into the right optimized DSO from transformation routine. Or programmatically we need to do this.
Thanks in advance.Hi,
Here there are two DSO used. One to collect the corrrect records and the other to collect the error records. Which will used later for reconciliation with the business and then again loaded after the rectification.
So from the transformation of the Main DSO we need to update the error DSO (when ever any validation fails).
Let me know any function module to update the right optimized DSO.
Thanks,
Jugal.
Edited by: jugal behera on Feb 6, 2008 4:38 AM -
Standard Function modules to update customer partner
Hi,
Can anyone please suggest standard function modules to update customer partner functions?
Was looking at Customer_insert, customer_update, CUSTOMER_UPDATE_SALES_AREA.
I will have only the partner data in the customser sales view to get updated. I dont need the company data.
Awaiting some insightful inputs please.
Thanks,
SatheeshFM and TABLES
http://72.14.235.104/search?q=cache:71IXBMWcX_8J:reflexcontracts.co.uk/SAP_R3_QUICK_REF.xlsupdatetable+tse05&hl=en&ct=clnk&cd=1&gl=in
FUNCTION MODULES
http://www.erpgenie.com/abap/functions.htm
http://www.sapdevelopment.co.uk/fmodules/fmssap.htm
http://www.erpgenie.com/abap/index.htm
http://www.geocities.com/victorav15/sapr3/abapfun.html
Rewards if useful.........
Minal -
Function module to update net price in purchase information record ???
hi all,
Is there any function module to update net price (PREIS) for each material in the purchase info record?
points will be rewarded for helpful answersHi,
Use below FM :
Clear : i_prot.
refresh : i_prot.
Delivery Update
CALL FUNCTION 'LE_MOB_DELIVERY_UPDATE'
EXPORTING
do_commit = 'X'
TABLES
t_delivery_items = i_lips
prot = i_prot
EXCEPTIONS
conversion_overflow = 1
essential_data_missing = 2
error = 3
nothing_to_update = 4
lock_after_update_failed = 5
error_in_delivery_update = 6
OTHERS = 7.
COMMIT WORK.
Pass lips-lgort..
Refer
https://forums.sdn.sap.com/click.jspa?searchID=4212688&messageID=3855382
Regards -
How to use function module to update data
Hello ,
Can any body have idea how we can use function module SAVE_TEXT to update the master recipe header and operation long text.
I want to use this functional module to update the master recipe long text
step by step procedure is highly appreciated
thanks & regards
siddhasrthHi
SAVE_TEXT
SAVE_TEXT writes a text module back to the text file or the text memory, depending on the storage mode of the corresponding text object.
You can use this module either to change existing texts or to create new texts. If you know for sure that the text is new, use the parameter INSERT to indicate this. The system then does not have to read the text first, which improves the performance of the function module.
If the lines table passed with the function module is empty, the system deletes the text from the text file.
Function call:
CALL FUNCTION 'SAVE_TEXT'
EXPORTING CLIENT = SY-MANDT
HEADER = ?...
INSERT = SPACE
SAVEMODE_DIRECT = SPACE
OWNER_SPECIFIED = SPACE
IMPORTING FUNCTION =
NEWHEADER =
TABLES LINES = ?...
EXCEPTIONS ID =
LANGUAGE =
NAME =
check thi sample code
CALL FUNCTION 'SAVE_TEXT'
EXPORTING
CLIENT = SY-MANDT
HEADER = t_header
SAVEMODE_DIRECT = 'X'
* OWNER_SPECIFIED = ' '
* LOCAL_CAT = ' '
* IMPORTING
* FUNCTION =
* NEWHEADER =
TABLES
LINES = t_long
EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
OBJECT = 4
OTHERS = 5
Reward all helpfull answers
Regards
Pavan -
Bapi Or Function Module for Updating a table
Can u Plz let me know , is there any bapi or function module to update few fields of a standard table using an internable.
Hi Shiva Kumar Tirumalasetty ,
There is no FM / BAPI to update directly to any SAP tables . SAP won't suggests to develop a FM/BAPI like that , as it will cause some data inconsistency problem .
We have to search and find BAPI's/ FM's for requirement specific if not exists then need to think about the alternate options (LSMW/ BDC etc..)
Hope this answers your question.
Thanks,
Greetson -
Bapi function module to update PRPS table
Hi ,
Presently i have a requirement which needs to update some data from ZIOS table into PRPS table. Can any one tell me what is the Bapi function module for updating data into PRPS table.
<REMOVED BY MODERATOR - REQUEST OR OFFER POINTS ARE FORBIDDEN>
Thanks,
Satish Raju
Edited by: Alvaro Tejada Galindo on Jan 12, 2010 11:46 AMThese ZZ fields are specific to your application, use the EXTENSION parameters.
Look in BAPI_PS_INITIALIZATION documentation, there is an explanation how-to fill specific fields.
For the BAPIs used to create and change project definitions, WBS
elements, networks, activities, and activity elements, you can
automatically fill the fields of the tables PROJ, PRPS, AUFK, and AFVU
that have been defined for customer enhancements in the standard system.
For this purpose, help structures that contain the respective key
fields, as well as the CI include of the table are supplied. The BAPIs
contain the parameter ExtensionIN in which the enhancement fields can be
entered and also provide BAdIs in which the entered values can be
checked and, if required, processed further.
CI Include Help Structure Key
CI_PRPS BAPI_TE_WBS_ELEMENT WBS_ELEMENT
Procedure for Filling Standard Enhancements
Before you call the BAPI for each object that is to be created or
changed, for which you want to enter customer-specific table enhancemen
fields, add a data record to the container ExtensionIn:
o STRUCTURE: Name of the corresponding help structure
+o VALUEPART1: Key of the object + start of the data part+
o VALUEPART2-4: If required, the continuation of the data part
VALUPART1 to VALUPART4 are therefore filled consecutively, first with
the keys that identify the table rows and then with the values of the
customer-specific fields. By structuring the container in this way, it
is possible to transfer its content with one MOVE command to the
structure of the BAPI table extension.
Note that when objects are changed, all fields of the enhancements are
overwritten (as opposed to the standard fields, where only those fields
for which the respective update indicator is set are changed).
Therefore, even if you only want to change one field, all the fields
that you transfer in ExtensionIn must be filled.
You have to use these parameters in BAPI_BUS2054_GETDATA as well as in BAPI_BUS2054_CHANGE_MULTI.
Regards
Maybe you are looking for
-
Hi I am trying to create rules that would copy the incoming email to a cloud folder ( depending on sender ) and move the actual email from the inbox to a local folder on my laptop. The problem i seem to be having is the first rule ( regardless of whe
-
G5 no status light and USB current warnings - anyone seen this before..
Hi, Just got an old G5 that had not been used in a while... Pressing the power button boots the system fine.. However, the Status/Power light does not appear...!!!... After a while the system throws lots of USB Over current messages on the screen e
-
Rule Author-How to use own JSP screen instead of Rule Author Customization
hi' I am using Oracle Business Rules and creating Rule Repository using Rule Author however I want to use my own JSP screen for customization of Rules instead of using Rule Author customization screen. please tell me how to do this. thanks Yatan Edit
-
Weblogic 8.1 Apache Plug-In
Where can I find the plug-in for WLS 8.1/Apache 2.0/Windows 2003?
-
NLS_DATE_LANGUAGE & ICX:Date Language
Oracle documents says profile option value for is determined by session language, the NLS_DATE_LANGUAGE is set blank on both DB & Applicaion server. Current Profile value "ICX:Date Language" is set to "American", I want this changed to "American Engl