Function module works correctly in debugger, but hangs otherwise.

I am having an issue with a standard function module that 'hangs' when ran. If i look in sm37, the calling job will just continuously run. If i look in SM50, there aren't any sql statements which are bringing back large results, it seems to be running a large number of sequential reads against a certain table. The odd thing is, if i break in this function module, then press F8 to continue, the function module successfully executes and the job finishes.
The function module in question is ISU_DUNNING_DEACT_INSTPL_0350, which i have attached to a dunning activity. This function module SHOULD deactivate any active installment plans for the dunned account. The FM is odd, as it calls another FM and does a hard EXIT, even though there is code below this line that it can never access.
If I set a breakpoint in the function module, and run FPVB (dunning transaction), it will break into the function module. I can then press F8, the FM completes successfully, then the job completes. If i do NOT break it (just run in background as normal), the job just continuously runs. SM50 reveals reads to the BUT000 table (even though i cannot find any calls to this table in the fm).
Any ideas?

Nishikant,
Thanks very much for the help.
I did this, and I can see where its getting stuck. The following entries are repeated indefinitely (until i stop it )
      374 BUT000     FETCH       1      0
        3 BUT000     REOPEN             0 SELECT WHERE "CLIENT" = '120' AND "PARTNER" = '0007024125'
      420 BUT000     FETCH       1      0
        3 BUT000     REOPEN             0 SELECT WHERE "CLIENT" = '120' AND "PARTNER" = '0007024125'
      365 BUT000     FETCH       1      0
        3 BUT000     REOPEN             0 SELECT WHERE "CLIENT" = '120' AND "PARTNER" = '0007024125'
If i double click the SQL statement, i see these details
SQL Statement
SELECT
    "CLIENT"
FROM
    "BUT000"
WHERE
"CLIENT" = :A0 AND "PARTNER" = :A1
Variable
A0(CH,3) = 120
A1(CH,10) = 0007024125
I caught it in SM50 where the read was, and it says the select exists in Function Pool SAPLBPT1. I have done a search in this for anything containing BUT000, but have found nothing. Any suggestions on how to find where this is occurring, or what might be going on?

Similar Messages

Function Module working only in debug mode

Hi all,
The following Function Module works only in debug mode. The purpose of this FM is to create a notification and to put it in progress status. If I put a breakpoint before "CALL FUNCTION 'BAPI_ALM_NOTIF_PUTINPROGRESS'" it works. If I execute this FM without putting a breakpoint at that place it creates the notification but doesnt put it in progress status.
In other words, the last BAPI call doesnot work if I dont put a breakpoint before.
Can somebody help me to find out where is the problem?
Thanks,
Younes
FUNCTION ZFM_CREATE_NOTIF_IN_PROCESS.
""Local interface:
*" IMPORTING
*"     VALUE(NOTIFTYP) TYPE CHAR2
*"     VALUE(NOTIFHEADER) TYPE BAPI2080_NOTHDRI
*" EXPORTING
*"     VALUE(NOTIFNUMBER) TYPE CHAR12
*"     VALUE(NOTIFCURSTATUS) TYPE CHAR40
DATA: gs_bapi2080_nothdre TYPE bapi2080_nothdre,
      gt_return TYPE TABLE OF bapiret2.
The notification is created with a temporary number
CALL FUNCTION 'BAPI_ALM_NOTIF_CREATE'
EXPORTING
    notif_type         = NOTIFTYP
    notifheader        = NOTIFHEADER
IMPORTING
    notifheader_export = gs_bapi2080_nothdre
TABLES
    return             = gt_return.
READ TABLE gt_return TRANSPORTING NO FIELDS WITH KEY type = 'E'.
CHECK sy-subrc IS NOT INITIAL.
*The notication will be saved with a number which isnt temporary
CALL FUNCTION 'BAPI_ALM_NOTIF_SAVE'
EXPORTING
    number      = gs_bapi2080_nothdre-notif_no
IMPORTING
    notifheader = gs_bapi2080_nothdre
TABLES
    return      = gt_return.
READ TABLE gt_return TRANSPORTING NO FIELDS WITH KEY type = 'E'.
CHECK sy-subrc IS NOT INITIAL.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
The Notif is already created, it will be put in progress status
NOTIFNUMBER = gs_bapi2080_nothdre-notif_no.
   CALL FUNCTION 'BAPI_ALM_NOTIF_PUTINPROGRESS'
        EXPORTING
          NUMBER             = NOTIFNUMBER
          LANGU              = SY-LANGU
       IMPORTING
         SYSTEMSTATUS       = NOTIFCURSTATUS
       TABLES
         RETURN             = gt_return.

Hi Emmanuel,
Now I get your problem: you want to wait to have the commit finished! The call to BAPI_TRANSACTION_COMMIT has an optional parameter 'WAIT' which is space by default which causes only a commit. When you set this parameter to 'X' it will do a commit work and wait.
This should solve your problem!
Regards,
John.

HT1937 My iPhone was working correctly with FaceTime but now it's not , say (waiting for activiation) what should I do ?? Kindly if you can help!!

My iPhone was working correctly with FaceTime but now it's not , say (waiting for activiation) what should I do ?? Kindly if you can help!!

Thanks for your answer...
My iPhone was connected to a wifi internet when I tried to activate it and when I tried activation by iTunes I was using my laptop with windows 7 which was connected to internet by cable.
I updated my iPhone to IOS 7 when I was in Egypt and I had no problems with updating it and I can't remember if finding my iPhone option was on or off before updating to IOS 7 and as i understood from searching internet that to use iCloud Finder on web from computer to find my iPhone it should be set up already on my iPhone and I didn't set up iCloud on my iPhone before and my Apple ID wasn't verified for iCloud till today, I verfied it by logging in iCloud from a friend iPad.
I was considering already the option that my iPhone has been hacked but if this happened so how I would unlock my iPhone and activate it to back to work? who would help me with that? I'm so tired of being without my phone for almost 4 days and I started to consider not having any Apple product anymore... I think that this way to secure the consumer has a lot of conflicts...

The javascript functions are working correctly, but still get scripting error messages

When you open or run any javascript functions in this form, error messages pop up, but functions work correctly. Anyone that can help me get rid of error messages? Screenshots are attached.

can you please share the error messages.

SSF function module to disable pop window but OTF data is not coming.

Hi Experts,
My requirement is to get the PDF from the SSF function module and email it and i don want to display the pop option
I passed these parameters
1.no_dialog = c_x.
2.-preview = c_x.
3.-no_open   = c_x.--|
4.no_close = c_x.---| if i add these two conditions i don get printer pop up but i don get the data for " job_output_info " also.
to this function module ,
Please tell me how to get data into " job_output_info " import parameter by not displaying the pop up for printer.
Thanks and Regards in advance.

Hello,
we did it using the following code.
DATA: w_ctrlop TYPE SSFCTRLOP,
        w_return TYPE SSFCRESCL.
DATA ls_job_output_info TYPE ssfcrescl.
DATA p_pdf_len          TYPE i.
DATA pt_tlines          TYPE TABLE OF tline.
(function_name is the name of the smartform)
W_CTRLOP-GETOTF = 'X'.
W_CTRLOP-NO_DIALOG = 'X'.
    CALL FUNCTION function_name
      EXPORTING
        CONTROL_PARAMETERS         = W_CTRLOP
        USER_SETTINGS              = 'X'
     IMPORTING
        JOB_OUTPUT_INFO            = ls_job_output_info
      EXCEPTIONS
        FORMATTING_ERROR           = 1
        INTERNAL_ERROR             = 2
        SEND_ERROR                 = 3
        USER_CANCELED              = 4
      OTHERS                       = 5.
    IF SY-SUBRC <> 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    REFRESH pt_tlines.
    CLEAR: p_pdf_len.
    CALL FUNCTION 'CONVERT_OTF'
     EXPORTING
        FORMAT                      = 'PDF'
     IMPORTING
        BIN_FILESIZE                = p_pdf_len
      TABLES
        OTF                         = ls_job_output_info-otfdata
        LINES                       = pt_tlines
     EXCEPTIONS
       err_max_linewidth           = 1
       err_format                  = 2
       err_conv_not_possible       = 3
       err_bad_otf                 = 4
       OTHERS                      = 5.
    IF sy-subrc <> 0.
    ENDIF.
    CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
       bin_filesize                    = p_pdf_len
       filename                        = p_filename
       filetype                        = 'BIN'
      TABLES
        data_tab                        = pt_tlines
     EXCEPTIONS
       file_write_error                = 1
       no_batch                        = 2
       gui_refuse_filetransfer         = 3
       invalid_type                    = 4
       no_authority                    = 5
       unknown_error                   = 6
       header_not_allowed              = 7
       separator_not_allowed           = 8
       filesize_not_allowed            = 9
       header_too_long                 = 10
       dp_error_create                 = 11
       dp_error_send                   = 12
       dp_error_write                  = 13
       unknown_dp_error                = 14
       access_denied                   = 15
       dp_out_of_memory                = 16
       disk_full                       = 17
       dp_timeout                      = 18
       file_not_found                  = 19
       dataprovider_exception          = 20
       control_flush_error             = 21
       OTHERS                          = 22.
    IF sy-subrc <> 0.
      MESSAGE s614(zef) DISPLAY LIKE 'E'.
ENDIF.

HT4773 I have upgraded to Lion and I have a new Apple keyboard, however none of my function keys work correctly. Any idea what is the solution?

I have upgraded to Lion and have a new keyboard. The problem I have is that the function keys are not working correctly - none of them. F1 -> F6 are not working at all and F7 - F12 do what F1 etc are supposed to do. Any ideas for a solution?
Thanks in advance

That message is telling you to update iTunes on your computer, not your phone. You need iTunes 11.1 on your computer in order to sync your devices.

Mod function not working correctly

I wrote a code to decimal to binary number system, this code works properly for 5 but show wrong result on 47. I tried lots of times but not getting solution.When "23.5 mod 2" calculated I
got the remainder 0 which is worng it should be 1.
Private Function convertor_bin_and_octal(num1 As Double, system As Byte) As String
Dim Exponent As Double, mantes As Double, num As Double, h As Byte
Dim b As String
Dim a As String
If IsNumeric(num1) = True Then
num = Int(num1)
Exponent = num1
While num >= system
Refresh
h = num Mod system
a = a & Str(h)
num = num / system
Wend
a = a & Int(num)
a = StrReverse(a)
num = num1
ma = Exponent - Int(num)
If ma <> 0 Then
While ma <> 0
ma = ma * system
b = b + Str(Int(ma))
ma = ma - Int(ma)
Wend
a = a & "." & b
End If
convertor_bin_and_octal = a
Else
Label2.Caption = "Please enter the numeric value only"
Text1 = ""
Text1.SetFocus
End If

Please move your post to VB forum here:
https://social.msdn.microsoft.com/Forums/en-US/home?forum=vbgeneral
Fouad Roumieh

Function module table returning empty rows but export data is getting

Hi,
I am executing function module through JCO after setting importing parameter and when i retrieve the table i get table with empty data 0 rows but i am able get export parameter data . when execute the same function module in abap through sap gui i get table containing 5 rows. what may be the problem. please find below code
      function = getDefaultJCoConnection().getJCoFunction("ZCRM_ICSS_PROJ_CUST_USR");
            function.getImportParameterList().getField("USER_ID").setValue("MLDL010");
            getDefaultJCoConnection().execute(function);
            exportTable = function.getTableParameterList().getTable("PROJCUSTLIST");
            int rowsNumber = exportTable.getNumRows(); // companies table number of rows
            log.error("rowsNumber----"+String.valueOf(rowsNumber));
try
     if (rowsNumber > 0)
     int i = 0;
     do
     tempString="table valuesZCOMP_ID"(String)exportTable.getValue("ZCOMP_ID")"ZCOMP_SPC-"+(String)exportTable.getValue("ZCOMP_SPC")
                 + "table valuesZCOMP_DESC"(String)exportTable.getValue("ZCOMP_DESC")"ZPRICE-"(String)exportTable.getValue("ZPRICE")"---" ;
     log.error(tempString);
     while (exportTable.nextRow());
     catch (Exception th)
     log.error("The following error occured: while retrieving table values ", th);
Do you have any idea where may be the problem
Regards,
Pavan
Edited by: Pavan Reddy on Apr 10, 2010 4:46 PM

Hi Pavan,
This could be the case. The function module might be expecting a value converted into its format.
By this, I mean that the function module might be expecting 0012345678 for 12345678 (Where data element of the ID is of type CHAR 10 ).
Please check if it is so.
Best Regards,
Kris.

Script works in Script Debugger, but not a folder action - can u help?

Hi
I have written the following script to run as as folder action and it works fine when running it through in debug mode in Script Debugger, but as a folder action nothing happens.
I wonder if someone could have a look and spot what the problem is.
Thanks
Nick
on adding folder items to this_folder after receiving added_items
set convertPath to "Macintosh HD:opt:local:bin:ffmpeg"
tell application "Finder"
set inPath to this_folder as alias
set outPath to this_folder as alias
set filesToConvert to (name of every item of inPath whose name extension is "m4a")
end tell
repeat with i from 1 to count of filesToConvert
set fileName to removeExtension(item i of filesToConvert)
do shell script POSIX path of convertPath & " -i " & (quoted form of ((POSIX path of inPath) & item i of filesToConvert)) & " -f mp3 -ar 44100 -ab 192k -acodec libmp3lame " & (quoted form of (POSIX path of outPath)) & quoted form of (fileName & ".mp3") & " -mapmetadata " & (quoted form of ((POSIX path of inPath) & item i of filesToConvert)) & ":" & (quoted form of (POSIX path of outPath)) & quoted form of (fileName & ".mp3")
end repeat
end adding folder items to
to removeExtension(fileToParse)
#display dialog fileToParse
set prevTIDs to text item delimiters of AppleScript
set text item delimiters of AppleScript to "."
return first text item of fileToParse
set text item delimiters of AppleScript to prevTIDs
end removeExtension

mmh, well, it seems something is awry with the triggering. other folder action scripts seemed to work fine, but now are intermittent.
i created the following simple script:
on adding folder items to this_folder after receiving added_items
display dialog "1"
end adding folder items to
sometimes it works, sometimes not.
what could be going wrong?

Same Function module accessible in 4.6c but not in ecc6

Hi,
When I am calling the fm in a program with parameter which is not defined in FM in SAP ver 4.6 C its not giving any dump, but the same thing when I call in ECC 6 its giving error message that field is not defined.
could any one tell me the reason behind the above senario.
thanks
bobby

Hi Aravinda,
The function module is the custom FM . While calling THIS fm we are passing the import parameter which is not defined in FM . the problem is that the Program calling the FM is running in 4.6c but in ECC6 its giving dump i.e parameter not defined. Therefore my question is why its giving dump in ECC6 and not in 4.6c
thanks
bobby

Brush function not working correctly PS Elements 11 for Mac

The brush is not working correctly in that I cannot drag the brush. It allows only spot healing, not dragging the brush. Didn't use to have this problem. Now do. Not sure what has changed. Thank you!

Is this happening after upgrading to Yosemite?
If yes, please see:
Photoshop Elements doesn't respond when you use editing tools in Mac OS X 10.10
Thanks,
Anwesha

Paypal button not working correctly in Firefox but does with IE

On the Donate page of www.jnh-goneriding.org are several Paypal buttons with drop down options. When you choose anything other than the first line and click on Buy Now - when it goes to the next screen it only shows the first line - not the line you picked in the drop down.
This works correctly in Internet Explorer.

Firefox will show the link if nothing is blocking it...
In case an ad blocker, script blocker, or another extension is involved, could you test the page in Firefox's Safe Mode? That's a standard diagnostic tool to deactivate extensions and some advanced features of Firefox. More info: [[Troubleshoot Firefox issues using Safe Mode]].
You can restart Firefox in Safe Mode using either:
* "3-bar" menu button > "?" button > Restart with Add-ons Disabled
* Help menu > Restart with Add-ons Disabled
Not all add-ons are disabled: Flash and other plugins still run
After Firefox shuts down, a small dialog should appear. Click "Start in Safe Mode" (''not'' Reset).
Any difference?

XQuery translate() function not working correctly?

The following XQuery fragment
return
xf:translate($product/@description, "&#174", "®")
where
$product/@description
contains
Complete Choice&#174 Plan
returns
Colete Choice® Pln
not, as expected
Complete Choice® Plan

967660 wrote:
Hi,
Another quick question if people don't mind. Bit confused about the trunc date function. I'm following the sql fundamentals exam guide and using their examples:
select trunc(to_date('02-jun-2009 13:00','dd-mon-yyyy hh24:mi')) day from dual;
this returns the 2nd of june, as it should, because, as far as i'm aware, leaving the optional variable out defaults the precision to 'day'. but when i explicitly add the variable 'day', as the guide has done with 'week' 'month' and 'year' in the following examples (so i assume this format is correct rather than dd/mon/yyyy), something goes wrong:
select trunc(to_date('02-jun-2009 13:00','dd-mon-yyyy' hh24:mi'), 'day') day from dual;
this returns the 31st of may. which is incorrect.
however replacing 'day' with 'dd' provides the correct answer of the 2nd again.
this isn't a major issue, it just bothers me that the guide seems (again) to be mistaken, something that is rapidly becoming a trend in their examples. i'd also quite like to know why this is happening, as it will help improve my understanding of sql in general - perhaps there is some sort of default to allow the correct use of the variable 'day' i'm overlooking and that the guide hasn't made clear.
btw, i'm working in sqlplus - although developer has some odd results too.
thanks alot,
nick'day' doesn't trunc to the beginning of the day. It truncates to the first day of the week: in your case 31st May.
'ddd' truncates to the beginning of the day.
So, leaving the second parameter out defaults to 'ddd' not 'day'.

Trunc date function not working correctly

Hi,
Another quick question if people don't mind. Bit confused about the trunc date function. I'm following the sql fundamentals exam guide and using their examples:
select trunc(to_date('02-jun-2009 13:00','dd-mon-yyyy hh24:mi')) day from dual;
this returns the 2nd of june, as it should, because, as far as i'm aware, leaving the optional variable out defaults the precision to 'day'. but when i explicitly add the variable 'day', as the guide has done with 'week' 'month' and 'year' in the following examples (so i assume this format is correct rather than dd/mon/yyyy), something goes wrong:
select trunc(to_date('02-jun-2009 13:00','dd-mon-yyyy' hh24:mi'), 'day') day from dual;
this returns the 31st of may. which is incorrect.
however replacing 'day' with 'dd' provides the correct answer of the 2nd again.
this isn't a major issue, it just bothers me that the guide seems (again) to be mistaken, something that is rapidly becoming a trend in their examples. i'd also quite like to know why this is happening, as it will help improve my understanding of sql in general - perhaps there is some sort of default to allow the correct use of the variable 'day' i'm overlooking and that the guide hasn't made clear.
btw, i'm working in sqlplus - although developer has some odd results too.
thanks alot,
nick

967660 wrote:
Hi,
Another quick question if people don't mind. Bit confused about the trunc date function. I'm following the sql fundamentals exam guide and using their examples:
select trunc(to_date('02-jun-2009 13:00','dd-mon-yyyy hh24:mi')) day from dual;
this returns the 2nd of june, as it should, because, as far as i'm aware, leaving the optional variable out defaults the precision to 'day'. but when i explicitly add the variable 'day', as the guide has done with 'week' 'month' and 'year' in the following examples (so i assume this format is correct rather than dd/mon/yyyy), something goes wrong:
select trunc(to_date('02-jun-2009 13:00','dd-mon-yyyy' hh24:mi'), 'day') day from dual;
this returns the 31st of may. which is incorrect.
however replacing 'day' with 'dd' provides the correct answer of the 2nd again.
this isn't a major issue, it just bothers me that the guide seems (again) to be mistaken, something that is rapidly becoming a trend in their examples. i'd also quite like to know why this is happening, as it will help improve my understanding of sql in general - perhaps there is some sort of default to allow the correct use of the variable 'day' i'm overlooking and that the guide hasn't made clear.
btw, i'm working in sqlplus - although developer has some odd results too.
thanks alot,
nick'day' doesn't trunc to the beginning of the day. It truncates to the first day of the week: in your case 31st May.
'ddd' truncates to the beginning of the day.
So, leaving the second parameter out defaults to 'ddd' not 'day'.

Playlist function not working correctly

I have an Ipod nano 4th generation, it works fine in every way it is supposed to except when it come to the playlist function. When ever a song is selected from a list of songs or an artist/album list containing 10+ or so songs it does not add the selected son go to the on the go playlist on the ipod. Instead it adds a completely random song from the list with no logic to the song it picks. Does anyone else have this problem or know how to solve it? I have sent one Ipod away to be fixed but the replacement appears to have the same problem. Is this an issue with all 4th generation nanos or am I just rather unfortunate? if it is a recurring issue have apple acknowledged it/done anything about it?

Because you have uploaded the files with the iWeb FTP, the folder of files created by iWeb - southcoasttv - has been uploaded along with the index.html file. Therefore the URL has the folder name in it and this is normal.
You can change it if you want but you need to use an FTP application to upload the files rather than the whole folder....
http://www.iwebformusicians.com/WebMusic/URLs-Favicons.html

Function module works correctly in debugger, but hangs otherwise.

Similar Messages

Maybe you are looking for