Function Modules called during a Transaction

Hi Experts,
       Is there a way to find out the Function Modules/BAPI's called when I run a Transaction/Program (during runtime).
      Let's say I run a trasaction ME22N and Press Save button. The transaction saves the data. Now I would like to know what are all the FunctionModules the transaction invoked during Save action. I went through tracing ST01, could not find it as helpful.
Thanks in advance.

Read the SAP help for details, but briefly.
Tx Se30.
Create a new variant.  Check "Within and Below", "RFC, Update", "Particular Units" in tab "Program Parts".  Choose "none" aggregation in tab "Duration/type".
Save the variant.  With that variant selected enter the tx you want to trace - e.g. ME22N, and click on Execute.
Get to the point in the tx just before you press Save.  Choose menu system->utilities->runtime analysis->switch on.
Press save.
When the system comes back to you, choose menu system->utilities->runtime analysis->switch off, and leave the transaction.
In the screen section "Performance Data File", click on "Evaluate".  Go to menu Goto->Hit List->Standard (or press F5)
All the function modules hit (and lots of other information) will be displayed.
matt

Similar Messages

  • Need to track Function modules called when executing a transaction

    Hi All,
              Is there a way through which i can track function modules called, while executing a Transaction. Kindly provide pointers to it.
    Thanks in advance.
    Regards,
    Navin.

    Goto SE80 Transaction and use Program name for corresponding Transaction Use Find operation like Call Function .. then you will get list of FM ..
    There is no other option .
    reward Points if it is helpful
    Thanks
    Seshu

  • Raise exception in function module call from SAP owned program

    I need to raise an exception in a function module to terminate a transaction, display a error message and return to to previous selection screen so the user can fix the error before moving forward.......  
    How do you do this when the program using the function module is SAP owned?
    Thank You!
    Jeff

    Hi,
    After calling the function module, you can do something like this.
    IF SY-SUBRC <> 0.
      RAISE EXCEPTION.
    ENDIF.
    Regards,
    Ferry Lianto

  • Function modules to update ME01 transaction

    Hi,
    Can I get the list of Function modules to update ME01 transaction..
    Thnx in advance,
    Shivaa

    Hi shiva,
          Try this funtion module ,
    ME_UPDATE_SOURCES_OF_SUPPLY        Update source list
    ME_UPDATE_SOURCES_OF_SUPPLY_BA Update source list records in background during generation
    I hope,it will help you
    <=<< Sharing Knowledge is a way to Innovative >>=>
    By,
      Yoga

  • Function module call with destination

    Hi,
    how can check if a function module call with destination works or not ?
    How can I debug.
    What can be the reason if it is not calles
    regards
    ertas

    * to chcek the rfc Destination By pass RFC destination name and Connection Type..
    RFC_CHECK_DESTINATION
    or
    RFC_CHECK_DESTINATION_ID
    or
    You can use this FM RFC_VERIFY_DESTINATION if your release is greater than 4.6C.
    Check this sample code from Craig Cmehil's weblog.
    CALL FUNCTION 'RFC_VERIFY_DESTINATION'
      EXPORTING
        DESTINATION = TMP
            TIMEOUT = 10
      EXCEPTIONS
        INTERNAL_FAILURE           = 1
        TIMEOUT                    = 2
        DEST_COMMUNICATION_FAILURE = 3
        DEST_SYSTEM_FAILURE        = 4
        UPDATE_FAILURE             = 5
        NO_UPDATE_AUTHORITY        = 6
        OTHERS                     = 7.
      IF SY-SUBRC EQ '0'.
        "* Do code here
      ENDIF.
    Prabhu

  • Rfc function module call error

    Hi Abaper,
    I'm doing upgrade from 4.7 to ecc 6.0 currently and encounter problem in one of the rfc function module that we used. I've tested the connection to destination using sm59 and the connection is successful.
    As an information, in the rfc setting, the target system is not Unicode system.
    When I test using se37 and put the rfc destination in my function module call, I always encountered system_error exception. There's no issue with this rfc call before in 4.7 system.
    Please help me on this. Thank you.
    Edited by: Abraham Bukit on Sep 3, 2008 2:36 AM

    Hi,
    I had the same issue in the past and solved it in the following way.
    If the destination system is not Unicode please try to set the password for the communication user set in SM59 using only upper-case characters and taking into account that the password shouldn't be longer than 8 characters.
    Hope this will help.

  • Problem with function module calling

    Hi,
    I have two questions here
    i have a function moduel 'Z_GET_MATL_BALANCE'
    in my code it called in the below said way
    CALL FUNCTION 'Z_GET_MATL_BALANCE'
        DESTINATION 'NONE'
        STARTING NEW TASK 'A'
        PERFORMING f_back ON END OF TASK
        EXPORTING
          ref_dte    = s_datum-low
          str_dte    = s_datum-high
          end_dte    = s_datum-high
          i_werks    = p_werks
          i_past     = 'X'
          i_future   = 'X'
          verselem   = p_mrpver
          plscn      = p_scenar
          r_outrec   = r_outrec
          supstk     = p_supstk
          days_ahead = w_days_ahead
          shipnt     = p_shipnt
        TABLES
          mat_bals   = w_zmat_bals_a
          i_zdatum   = i_datum
          mat_movmts = w_mat_movmts_a
          mat_ship   = i_mat_ship_a.
      IF sy-subrc NE 0.
        MESSAGE e005(ZMIM) WITH
       text-009 text-166 text-054 sy-subrc.
      ENDIF.
    FORM f_back USING task.
      CASE task.
        WHEN 'A' .
          RECEIVE RESULTS FROM FUNCTION 'Z_GET_MATL_BALANCE'
         TABLES
              mat_bals                     = w_zmat_bals_a
              mat_movmts                   = w_mat_movmts_a
              mat_ship                     = i_mat_ship_a
           EXCEPTIONS
                call_material_lesen_fail     = 1
                call_t450n_fail              = 2
                call_t399d_fail              = 3
                call_aufbauen_mdpsx_fail     = 4
                call_mdezx_aufbauen_fail     = 5
                call_t001w_fail              = 6
                call_zmrpelem_failed         = 7
                call_aufbauen_mdpsx_sim_fail = 8
                OTHERS                       = 9.
          IF SY-SUBRC NE 0.
           RET_CODE1 = SY-SUBRC.
          ENDIF.
    now my first question is what is the difference between function modules calling normally and in the above said way
    and the second question is
    under tables parameter i have four internal tables defined where as while calling the same function module using recive results i have three internal tables. is this correct?
    i am asking this because i am getting an error message while using this funciton module
    please do not give generic answers, all the helpful answers will get a def reward

    Call function starting new task is used to make Asynchronus RFC Call. In this case your function module will be called in a NEW SESSION and it will exceute independently from the Main program which is calling the FM. Also, the main program will continue its own processing and it will not wait for the RFC FM to complete.
    Its not mandatory to have all the TABLES parameters in the RETURN Perform (..Receive results from ...)

  • Need BAPI or function module to do FMZ1 transaction for funds commitment.

    Hi,
        I need a BAPI or function module to do FMZ1 transaction, please advise.
    Regards
    Fellow ABAPer.

    I think I found it.
    If anyone is searching for it too, we will use these one:
    CO_ZA_AVAIL_CHK_ORDER_MULTI

  • Can a function module call another function module

    Can a function module call another function module:-
      within the same function group
    (ii)  within different function  groups

    Hi,
    We can call function from another function. If there is a function which is like a calculator and all the operations are from different functions then we have to call the functions from the calculator function for different functions.
    If all the function are from same function group, Then the data is globally available to all the functions with in the group.
    Otherwise we have to declare the data definitions for each of the functions if they are in different function groups.  
    Yes it is possible to call a function module from another function module:-
    within the same function group
    (ii) within different function groups
    Reward.

  • Dynamic function module call

    Hi,
    I need to call few function modules dynamically.The exporting and importing parameters are also known only at run time.
    Can somebody help me out in this regard,
    Thanks and regards,
    Archna

    hi ,
    Create Function module according to your requirment  and call the same 
    such as
    Create functi0n module   where you are passing PLant  runtime   and get data related to Plant 
    write  code in function according to requirment  .
    FUNCTION zrfc_test.
    ""Local interface:
    *"  IMPORTING
    *"     VALUE(ZWERKS) TYPE  MARC-WERKS OPTIONAL
    *"  EXPORTING
    *"     VALUE(RETURN) LIKE  BAPIRET2 STRUCTURE  BAPIRET2
    *"  TABLES
    *"      ZIT_DATA STRUCTURE  MARC
      IF zwerks IS NOT INITIAL.
        SELECT *
          FROM marc
          INTO CORRESPONDING FIELDS OF TABLE zit_data
         WHERE werks = zwerks .
      ELSE.
        SELECT *
          FROM marc
          INTO CORRESPONDING FIELDS OF TABLE zit_data.
      ENDIF.
      IF sy-subrc = 0 .
        MESSAGE ' Selected ' TYPE 'I' .
      ENDIF.
    ENDFUNCTION.
      Suppose  at runtime you get Plant  7100
    types : begin  of w_marc .
             include structure  marc  .
    types : end of w_marc .
    data : it_data type standard table of w_marc with header line  .
    p_plant  = 7100 .
    Call to function module 
    CALL FUNCTION 'ZRFC_TEST'
    EXPORTING
       ZWERKS         = 'p_plant 
    IMPORTING
      RETURN         =
      TABLES
        zit_data       =  it_data  .
    You will get result in it_data .
    Note : if you don't know how to create  Function Module then  search on SDN you will get lots of Forum  .
    Regards
    Deepak.

  • Need a BAPI or function module to do FMZ1 transaction for funds commitment.

    Hi,
        I need a BAPI or function module to do FMZ1 transaction, please advise.
    Regards
    Fellow ABAPer.

    I think I found it.
    If anyone is searching for it too, we will use these one:
    CO_ZA_AVAIL_CHK_ORDER_MULTI

  • Idoc - Error Status 51: Incorrect function module called up

    Hi,
    In the receiver system for the custom message type, I got this error.
    Incorrect function module called up
    Can any one pls help me to solve this one.
    Regards,
    Bala Raja

    Hi Bala,
         Check the inbound function module attached to process code in receiving system. Generally in every inbound function module first check is coded for checking message type or for checking funciton module like below.In the receiving system go to WE20 and then select the partner and select inbound message type. in that double click on assigned process code.then you have to double click on displayed FM. In that fm check first few lines. You will find this error message.
    LOOP AT IDOC_CONTRL.
        IF IDOC_CONTRL-IDOCTP(6) <> 'DESADV'.
          MESSAGE ID 'E0' TYPE 'E' NUMBER '029'
          WITH IDOC_CONTRL-IDOCTP ' ' 'IDOC_INPUT_DESADV'
          RAISING WF_ERROR_PROCESS.
        ENDIF.
      ENDLOOP.
    Thanks & Regards,
    Kalyan.

  • RFC remote function module call from XI

    hi
    I am trying to call a remote function module directly from XI which is not a bespoke module.
    And i am getting the following error:
    com.sap.aii.af.ra.ms.api.DeliveryException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: failed to parse BAPI response due to: com.sap.aii.af.rfc.util.bapi.BapiException: Parameter with name RETURN not found.
    Please help me in this.
    Thanks in advance.

    Hi Naina,
    Normally RFC are synchronous, they do have return parameter as export parameter.
    If return parameter is missing then , you can create Wrapper RFC.
    Wrapper RFC:
    It is nothing but you just  create BAPI in SE37 transaction with Return parameter as export parameter and make it remote enabled by clicking on Radio button.
    Under source code, CALL BAPI which XI has to call.
    Thats it!
    I hope this helps.
    Let me know if any help required.

  • Regarding the RFC Function Module call from PI

    Hi All,
    I am working on one File to RFC interface, in which File adapter picks the file, this file data has to goto  2 function modules in SAP system. For this i added 2 Inbound interfaces in INTERFACE DETERMINATION and I developed 2 RECEIVER AGREEMENTS. In 2 RECEIVER AGREEMENTS i added single receiver RFC Communication Channel.
    Now i want assurance that once 1 st function module will execute completely, then only my second function module should be called. Is there any setting that i can do to make this sync?????.
    what is the use of  Send 'Confirm Transaction' in receiver RFC Communication Channel under Adavanced Mode.
    Thanks,
    Balu

    Hi,
    As per you requirement I would suggest to change your scenario as File To Proxy. It will much more easier and 100% sure to process second BAPI only after first gets successful inside the proxy.
    Pass the data from file adapter to inbound proxy and then inside proxy code you first call the first BAPI and use commit wrok. Once commit work is successful then you call the second BAPI otherwise rollback the changes.
    Example:
    Call First_BAPI
    <pass the data to it's import export parameters>
    Commit work.
    if sy-subrc =0.
    Call Second_BAPI.
    <pass the data to it's import export parameters>
    Commit work.
    endif.
    Note: If you are not very much comfortable with ABAP the discuss this with your ABAP team mate.
    Regards,
    Sarvesh

  • Getting values from a function module called in a WDA method

    Friends,
    I am trying to execute a function module from WDA.
    I have created a service call for the function module. The function module takes values from the user, looks up the corresponding values of another field and returns the values in an internal table.
    I am using the "Method Call in Used Controller" of WD Code wizard to call the function module.
    When the event handler method containing the call to the function module is executed, nothing happens.
    I am not sure how to pass values to the function module and to get the return values from the function module.
    I am new to using function modules from WDA. Please help me out.
    Thanks and Regards.

    Rashmi,
    Is the function module intended to collect input data from the UI and process it? - Yes
    If yes, then the input (importing parameter) to the Function Module is a table of values (which should be ideally from the context mapped to the Table UI Element). - The importing parameter is a single value NOT a table and is mapped to the view context.
    Now this table UI Element is bound to the view controller context , which in turn is mapped to the component controller context. And you are indeed being able to read the value of this internal table in the component controller method where the function module is being called by means of get_static_attributes_table (Is this right? - Yes, I am able to read the table of values that is passed from the component controller view to form view context by using get_static_attributes_table.
    Or are you being able to read it in the event handler method of the view controller and not being able to read it in the component controller method) -
    The function module takes a single value as import parameter and returns a table of values as return value.
    It works fine when no importing parameter is being used and returns the table of values that is getting passed from component controller context to form view context when i am able to read it using get_static_attributes_table.
    Now the question is: how to pass the import parameter value to the function module. I assumed since the importing parameter is a context node (like the return values are), i should set the value ( captured when the user enters the value in the form) to the importing parameter context attribute using set_attribute method. Since it is mapped to the component controller context, i assumed it will get passed and the method will take it as input parameter.
    Let me know if my assumptions are correct regarding passing the import parameters and what is missing here.
    Thanks and Regards.

Maybe you are looking for