Function modules in ECC 6

Hi All,
can any one suggest me in replacing these obsolete FMs :
TZ_SYSTEM_TO_LOCAL
ADDRESS_GET_DATA',
'ADDRESS_GET_COM'
<b><REMOVED BY MODERATOR></b>
Message was edited by:
Alvaro Tejada Galindo

For functions to get address details I suggest you look in function groups SZA* - these are the functions for central address management
Andrew

Similar Messages

Error while creating webservice from function module in ECC

Hi
while creating a web service out of a function module in ECC, in the configure service section we get a message saying ' Remember that the service does not have any runtime configuration and therefore cannot be used. Create the Web service configuration in the NetWeaver Admninistrator (transaction WSADMIN2).'
instead of check box 'release for runtime'.
Our ECC at release 7 patch level 22.
Checked in SCICM, SICF teh service and the folder are active.
Please suggest if we are missing on anything
Regards
Kumar

In new version on ECC, the runtime configurations needs to be performed in transaction SOAMANGER.
On executing the transaction, it opens a browser. The important configurations to be performed are:
1. Configure J2EE server and host. You can choose to provide the ECC server and host
2. Administration of the service in "Single Service Administration". The navigation path may differ depending of the ECC versions. But it is related to administration of the services.
Once done, check the WSDL generated.
Use this WSDL in the NWDS.
Regards,
Sharath

/CAB* function modules in ECC 6.0 DIMP

Hi all,
The /CAB 4.6 objects are does not exist in ECC 6.0. I am working on upgradation project. There are many /CAB function modules used in 4.6 version. How can i get the compatable function modules in ecc 6.0. Is there anyway to find the compatable funciton modules in ECC?
list of missing function modules:
/CAB/MM_MAT_PRUEFEN
/CAB/J_4CM_READ_SINGLE
/CAB/J_3CB_READ_SINGLE
/CAB/READ_MRP_ALLOCATION
/CAB/J_5CL_READ_SINGLE
/CAB/PP_MD_MCHB_J_5CO_FILL
/CAB/PP_MD_BDBS_ENQUEUE
/CAB/CHANGE_MRP_STATUS
/CAB/PP_MD_FAUF_WM_BEARBEITEN
/CAB/READ_MRP_ALLOCATION
/CAB/CAFM_J_5CO_AUS_J_5CX
/CAB/PP_MD_MSKA_J_5CO_FILL_ALL
/CAB/SYNC_ENTRIES_SELECT
/CAB/J_5CO_READ_SINGLE
/CAB/J_5CX_READ_SINGLE
/CAB/PP_MD_BDBS_ENQUEUE
/CAB/PP_MD_BDBS_CHECK_RES
/CAB/CHANGE_MRP_STATUS
/CAB/MRP_CONTROL_2
/CAB/J_2CS_READ_SINGLE
/CAB/MSLB_READ_SINGLE
/CAB/MSKA_READ_SINGLE
/CAB/MSKU_READ_SINGLE
/CAB/MKOL_READ_SINGLE
/CAB/MCHB_READ_SINGLE
thanks,
Prakash.
Edited by: Prakash Reddy on Apr 28, 2010 10:32 AM

Hi,
Theses function modules are Cable specific as i said before. i have solved the issues by using the existing ECC function modules and is working fne.
Thanks & Regards,
Prakash .s

Function module in ECC 6.0

Hi Experts ,
I have an issue in using Function module in ECC 6.0 , while passing data in table parameter is showing an error as ' Table parameter is obselete'. Can u please suggest any other way of passing table in function module.
<removed_by_moderator>
Edited by: Julius Bussche on Oct 20, 2008 10:35 AM

use table types:
types: ty_struc type ...,
ty_tab type standard table of ty_struc.
data: it_tab type ty_tab.
call function ...
changing it_tab
Don't use TABLES parameters any more, they have implicit header lines, which is a no-no in ABAP Objects context.
Thomas

Alternative Function module in ECC 6.0

Hi,
The function module FI_DOCUMENT_ARCH_JUMP_HEAD_SGL and FI_DOCUMENT_ARCH_READ_DETAILS is available in 4.6c but is not available in ECC 6.0.
I have to import a progam from 4.6 to ECC 6.0.with uses this function module .
Please let me know alternative function module in ECC 6.0
Thanks
Deepa

That's why it's never recommended to use the FMs that have not been released to the customer... You might be able to copy FMs as Z... objects from 4.6 into ECC 6.0. However, it's possible that underlying functionality has changed a lot and it just won't work.
Instead of asking for a replacement FM you might want to explain what exactly you're trying to achieve, then someone might be able to provide an alternative (not necessarily an FM).

WS_FILENAME_GET is obsolete function module in ECC 6.0

Hi Guys,
The function module "WS_FILENAME_GET" was obsolete in ECC 6.0, could you please suggest me which is relevant function module in ECC 6.0.
Thanks,
Gourisankar.

Hello,
Take a look at class CL_GUI_FRONTEND_SERVICES.
Regards,
John.

Absolete Function Modules for ECC 6.0

Hi guys,
iam doing upgrade project, i want know absolete for this function modules
CALL FUNCTION 'NAMETAB_GET'
EXPORTING
TABNAME = 'BKPF'
TABLES
NAMETAB = HNAMTAB
EXCEPTIONS
OTHERS = 0.
CALL FUNCTION 'WWW_USER_AUTH_MESSAG'
plz give me suggestion for me.

Hi Veera,
To find obsolete function modules in ECC 6.0.
The table is RODIR.
Go to SE11.
Give table name as RODIR.
click on display.
Then , in the selection criteria.......
For the field OBJECT TYPE give FUNC
and for OBSOLETE give 'X'
Execute and you will be able to see all the function modules which are obsolete.
Regards,
Hari Kiran

Obsolete function module in ECC 6.0 - BAPI_COSTESTIMATE_CREATE_SPLIT

Hi Guys,
The above function module obsoleted in ECC 6.0, I need related function module in ECC 6.0.
Could you please suggest me, which is the related function module in ECC 6.0?
Please take a high priority. Advance thanks guys.
Thanks,
Gourisankar.

Hello,
Take a look at class CL_GUI_FRONTEND_SERVICES.
Regards,
John.

Function Module - SAP ECC to BODS

Hi Experts - I have one function module in ECC system which is RFC enabeled and I have imported that in BODS.
Its showing me under function under ECC Data Store.
I am not able to drag it into normal data flow ,,,, Why ?
Is there any special data flow is required to use this.
I want to put the output of this function module in a flat file ? can i achieve this ? so function module to transform and then flat file.
Thanks
R

You need to call the function via a Schema Out function within a Query transform just like you would call a custom function, i.e. right-click in the Schema Out panel and select 'New Function Call' then in the function wizard you must select your ECC datastore from the 'Function Categories' list and then you should see your imported function on the right, then follow the wizard to define the input parameters and choose which output parameters you want output as colums in the query (and can then write to a flat file). Just be aware that if one of the output parameters is a table then you will need to unnest the table schema in a second query transform before wrtiting to the file. Oh and just use a 'Row_Generation' transformation to generate one dummy row as a source.

How to find the Obsolete function module in ECC 6.0

Hi Guys,
How we can find the all obsolete function in ECC 6.0, is any T-code to finding the obsolete function modules, or any other way to find.
Could you please help me.
Thanks,
Gourisankar.

Hi Gouri,
If you are looking at determining whether a single FM is obsolete or not is by this method:
Go to FM in SE37 -> Goto Attributes Tab -> General Data section -> look above the Edit Lock field ... where SAP places the release status and date of the FM, if the FM is obsolete, the text Function Obsolete appears
This is one way of finding out one FM @ a time
However if you want to check on a mass scale, I dont have a SAP system here hence cant confirm, however, all FMs are stored in TFDIR database table. Please scroll through the fields of the DB table to check whether any field relates to release status or the like. If it does, then from SE16, you can put the value corresponding to "Obsolete" in the field and run to check all FMs.
Cheers,
Aditya

Debugging RFC function module from ECC to CRM

Hi All,
My requirement is to debug an RFC function module present in CRM(7.0) system from ECC(6.0) system. A report program in ECC will call CRM custom FM. I found many posts in SDN with the same issue and tried to implement suggestions provided there. But I couldn't succeed. The approach I followed is:
I logged in to ECC report program and kept an external breakpoint just before the function module call.
I logged in to CRM system, opened the function module and kept an external breakpoint there.
In both the systems I provided the dialogue userid( id through which I log in to SAPGUI) in the system->settings->debugging option.
In CRM I activated the external break point in transaction SRDEBUG.
Now when I execute the report program in ECC, control stops at the breakpoint. If I press F5 at the function call, control is not going to the external break point set in the CRM FM. I am getting output of FM directly.
I tried with different settings like turning on the check box for IP matching and session breakpoint active immediate, switching to classic debugger etc. I also tried to provide the RFC user id instead of dialogue user but system throws exception saying only dialogue userids are allowed. I found that by inserting an infinite loop statement, control goes inside the RFC CRM FM but I prefer not to change the code.
Please let me know if I missed anything.
Thanks and Regards,
Naren

Hi,
Debug RFC calls
When an RFC function module is called it is usually not possible to debug the call, using the below techniques we can achieve the same. For this example we are calling an RFC enabled FM in ECC system from CRM system.
Scenario 1: Calling a custom RFC FM
STEP 1: Add an infinite loop in the remote custom Function Module (adding a u201CDO. ENDDO.u201D statement at the start of the FM would be enough).
STEP 2: Execute your program in the CRM system. The execution stops at the RFC call, because of the infinite loop.
STEP 3: Now login to the ECC system and go to transaction SM51 select the process which is executing the RFC and navigate to the menu: u201CProgram/Session->Program->Debuggingu201D this triggers the debugger session in a separate window.
Scenario 2: Calling a Standard RFC FM
When we are debugging a standard program we cannot add the infinite loop, hence we cannot go to SM51 and debug the work process. The RFC destination for the ECC system has a User specified, the RFC function module gets executed using this users credentials. Usually the basis team set up the RFC user as non Dialog user, this does not allow debugging. Contact your Basis team and get this changed to a dialog user enabling you to debug RFC function calls via the normal debugger.
Note: User name configured in the RFC destination (transaction SM59)
Note: User type for the RFC User (transaction SU01D)
Hope this will be helpful..

Replacement of Function module in ECC 6.0

Hello All,
The Function module 'NAMETAB_GET' is shown to be obsolete in ECC 6.0 .
Please suggest which of the function modules among 'DDIF_FIELDINFO_GET' and 'DDIF_NAMETAB_GET' can be used as a replacement for the same.
Also ,it would be helpful if the use of these function modules is mentioned.
Best Regards,
Lavanya.

use 'DDIF_NAMETAB_GET'
Functionality
This function module reads the runtime information (nametab) of a table or in general of any type of the ABAP Dictionary. However, the runtime information does not contain any text. You should use the function module DDIF_FIELDINFO_GET to read the runtime information including text (or to determine the domain for table fields).
The types of the ABAP Dictionary are divided into data elements, structured types and table types.
A structured type consists of a sequence of components that are each identified by a unique name. A type is defined for each of these components. In addition to the types of the ABAP Dictionary, you can also use the built-in types of the R/3 System (CHAR, NUMC,...) to define the types of the components.
All its components as well as the fields of its structured components are called the fields of a structured type. The name of a field no longer uniquely identifies it within a structured type. For example, a structured type S could have a structured component F, which itself has a component called F. In this case S would have two fields with the name F. For this reason, its long field name is used to identify a field within a structured type. The long field name is the same as the name of the components for the components of the structured type itself. For the fields of a structured component, the long field name is a concatenation of the name of this structured component, the separator '-' and the long field name of the field in the structured component.
A field whose type is defined by a data element or a built-in type is also called an elementary type. A structured type whose components are all defined as elementary types is called flat. All other structured types are called deep.
This module gets the runtime information for the type whose name is defined in the IMPORT parameter TABNAME. If there is no such type, the exception NOT_FOUND is triggered.
Caution: If the IMPORT parameter ALL_TYPES is not set, only flat structured types are taken into consideration. In this case the exception is also triggered if the specified type is a data element, deep structure or a table type.
If the IMPORT parameter LFIELDNAME is not initial, only structured types having a field with the long name defined by LFIELDNAME are taken into consideration. The exception NOT_FOUND is triggered for all other types.
The internal representation of the runtime object is returned in parameters X030L_WA and X031L_TAB. Depending on the type category, this information is then edited in the corresponding parameters (see documentation about the parameters).
Notes
1. If parameter LFIELDNAME is not initial, X031L_TAB nevertheless contains the description of all fields of the structured type. The decoded form is only determined for the specified field, and the result is copied to DFIES_WA instead of DFIES_TAB. Since decoding for all the fields often takes up most of the runtime for this module, you should set parameter LFIELDNAME if you only need information about one field of the structured type.
This module gets the runtime information about a type. This means that only the currently active version of the type is taken into consideration. If none exists, the exception NOT_FOUND is triggered.
The corresponding function module DDIF_<object type>_GET is used to read the actual definition of a type of the ABAP Dictionary.
Caution: These read modules are much less efficient than the modules for defining the runtime information. You should therefore only use them if the runtime information is not sufficient.
2. The documentation for IMPORT parameter GROUP_NAMES describes how to handle named includes.

Use of Interface parameters in Function module in ECC 6.0

Hello all,
In ECC 6.0 Version we do not use Changing/Tables interface parameters. Instead we declare a table type and use Exporting Parameters.
Can any one send me the link to sap help where this is mentioned.
Thanks,
Salil

Should be straight forward. Here's a sample...
Exporting...
VBSK_E LIKE VBSK
ET_SPLITPROT TYPE VLIKP_T_SPLITPROT
If not enough, do application help from function module....
http://help.sap.com/saphelp_nw04/helpdata/en/d1/801e9a454211d189710000e8322d00/frameset.htm

Has anyone used the FORMAT_MESSAGE function module in ECC 6.0 ??

We've upgraded to ECC 6.0 and now I have a BDC program using FORMAT_MESSAGE function module that has a problem. The number after the & (&1, &2, &3, &4) in the function mod isn't replaced, it stays as a literal and only the & is replaced with a valid value which it then passes back to the program.
Anyone else have this problem? Any ideas how to fix?
thanks
lz

Hi,
try like this....
*&      Form CALL_TRANSACTION
*       text
* --> p1        text
* <-- p2        text
FORM call_transaction .
CALL TRANSACTION '<Y......>' USING it_bdcdata
                             MESSAGES INTO messtab
                             MODE 'N'
                             UPDATE 'S'.
LOOP AT messtab.
    CALL FUNCTION 'FORMAT_MESSAGE'
      EXPORTING
        id        = messtab-msgid
        lang      = sy-langu
        no        = messtab-msgnr
        v1        = messtab-msgv1
        v2        = messtab-msgv2
        v3        = messtab-msgv3
        v4        = messtab-msgv4
      IMPORTING
        msg       = msg_txt
      EXCEPTIONS
        not_found = 1
        OTHERS    = 2.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    IF messtab-msgtyp EQ 'E'.
      WRITE:/ icon_checked AS ICON, 10 msg_txt.
      WRITE: 5 i_tab-wb_book COLOR 6.
*    ELSEIF messtab-msgtyp EQ 'S'.
*      WRITE:/10 msg_txt COLOR 6.
*    ELSEIF messtab-msgtyp EQ 'W'.
*      WRITE:/10 msg_txt COLOR 3.
*    ELSE.
*      WRITE:/10 msg_txt COLOR 4.
    ENDIF.
    CLEAR msg_txt.
ENDLOOP.
REFRESH:it_bdcdata,messtab.
ENDFORM.                    " CALL_TRANSACTION
Arunima

How to debug LAE function modules in ECC

Hi,
I've been trying to debug sequence of FMs called by LAE during asset creation in ECC. The asset is created for every service contract created in SAP CRM and then replicated to ECC system. While debugging the flow from CRM, I could debug upto ECC and then put external breakpoing in LAE FMs mentioned above but those FMs were not hit.
LAFA_ASSETS_CREATE_ON_LEASE
LAFA_ASSETS_CREATE
LAFA_ASSET_CREATE
LAFA_ASSETS_RETIRED_GET
Could anybody help me debugging these FMs?
Regards,
Ravi

Hi Ravi,
this process works asynchonous. This means from CRM some entries are stored in LAE_CRM* tables with function module FILA_BUS_TRANSACTION_RECEVIE. A triggered function picks up the entreis and process them. This function runs through your mentioned function modules.
In a test system, you can call transaction FILATEST and copy the contract sent from CRM and using the simulation or execution function. This will bring you to these function modules.
Kind regards,
Steve
Edited by: Steve Trester on Mar 1, 2011 8:13 AM

Enhance standard function module in ECC 5.0 System

Hi All,
My requirement is to add the custome fields in the standard screen.there is no screen exit for this screen.
The screen is calling by using the standard function module CALL_SCREEN_HU_DISPLAY
Iam working on ECC 5.0 System, Is it possisble to enhance the standard function module and add custome fields.
Please let me know if any suggestions.
Thanks & Regards,
Nagendra

Hi Reddy,
Thanks for the reply..
Can u please give the steps how to create implicit enhancement in function modules.
Thanks & Regards,
Nagendra

Function modules in ECC 6

Similar Messages

Maybe you are looking for