Function modules used in process message categories
Hi Gurus,
in process message characteristics, we need to assign the function modules. please advise is there any place (sap system or any website) where we can find all the function modules which are used in pi sheets? i want to know function modules and their uses or how to use them in pi sheets? if i want to develop new function modules, what should be the criteria, please guide me. thank you for the support.
Hello
In addition, on transaction O13C you will find the process message categories and which message destination is assigned to each category.
Here is the documentation of the message categories:
Predefined Process Message Categories - PP - PI-PCS Interface: Linking of Process Control Systems - SAP Library
BR
Caetano
Similar Messages
-
Unable to send table to function module using RFC
Hi all,
I'm trying to send a table from XI to a function module using RFC. I tested the process first using indivdual parameters. At this point there were no problems. Now I changed the import parameter of
the FM into a table and imported the changes into XI. I changed the Message mapping and tested it with multiple records. When I run the process XI calls the FM but the FM doesn't receive any data. I tested this by puting a break-point in the FM. There are no errors in the XML Messages Monitor. I found this message in the Communication Channel Monitoring:
Short Log:
Server 0 10_39293 Receiver channel 'CC_BackendIn' for party '', service 'BS_Backend' (internal name 'RfcClient[CC_BackendIn]')
Client data: {jco.client.lang=EN, jco.client.snc_mode=0, jco.client.client=610, jco.client.passwd=******, jco.webas.ignore_jdsr_error=1, jco.client.user=Admin, jco.client.sysnr=10, jco.client.ashost=192.168.51.8}
Repository data: {jco.client.lang=EN, jco.client.snc_mode=0, jco.client.client=610, jco.client.passwd=******, jco.webas.ignore_jdsr_error=1, jco.client.user=Admin, jco.client.sysnr=10, jco.client.ashost=192.168.51.8}
Current pool size: 0, maximum pool size : 1
Channel History
- OK: 2009-02-18 01:35:14 CET: Message processed for interface MIIA_BapiIn
Any ideas?
Thanks for your help!
Regards,
Ivo van EeHi everyone,
thanks for your prompt response! I tested the mapping in XI and didn't find any error here. So I concentrated on the receiver side. There were some communication channels running on the server that were generating errors. I stopped alle the communication channels and started just the two communication channels for this process. This time the table was successfully exported to the function module! Problem solved. Still not sure what caused the problem in the first place, but everything is working fine now.
Thanks for your help.
Regards,
Ivo -
How to find function modules used in maintenance table views
Hi,
How do I find the function modules used in maintenance table views?
I'm using SM30 and trying to open the custom table but there is an error message saying CREATE DATA PROCESSING FUNCTION MODULE.
Thanks.
Kathhi
in se80 select functon group and put your table function group name there and click display. it will show you the function modules used for that tables.
Regards
Madhu -
RFC Function module-With Only Request message
Hi
i need a RFC with only Request message and Response message is not required.
please help me, how to create a RFC function module with out Response message, and it should contain only Request message.
i have created RFC in this way:
RFC doesn't contain neither import nor export parameters. and i have defined one table in TABLE tab which refers to a ztable created already.
when i imported RFC into XI i came to know that RFC has both Request and Response messages, but i don't need Response message.
Thanks in advance..help would be appreciated
Regards,
RajeshThankx Michal,
I have written ZRFC this way:
insert ZMM_AUTO_GR from INPUT_TABLE .
if sy-subrc = 0.
commit work.
else.
rollback work.
im not using neither import nor export parameters..but using only tables parameters. but when imported in XI im getting same table structure in both request an response.
please suggest what changes required in above code to invoke my ZRFC in async way.
you will not get any response in XI- what chages required in my code to dnt get .reponse in XI.
appreciate your help.
Regards,
Rajesh. -
Which are function modules used to convert into XML format in SAP 4.6c Ver
which are function modules used to convert into XML format in SAP 4.6c Ver
Hi,
check this program , I think this will help you
TYPE-POOLS: ixml.
TYPES: BEGIN OF xml_line,
data(256) TYPE x,
END OF xml_line.
data : itab like catsdb occurs 100 with header line.
data : file_location type STRING.
data : file_name like sy-datum.
data : file_create type STRING.
file_name = sy-datum .
file_location = 'C:\xml\'.
concatenate file_location file_name into file_create.
concatenate file_create '.XML' into file_create.
DATA: l_xml_table TYPE TABLE OF xml_line,
l_xml_size TYPE i,
l_rc TYPE i.
select * from catsdb into table itab.
append itab .
CALL FUNCTION 'SAP_CONVERT_TO_XML_FORMAT'
EXPORTING
I_FIELD_SEPERATOR =
I_LINE_HEADER =
I_FILENAME =
I_APPL_KEEP = ' '
I_XML_DOC_NAME =
IMPORTING
PE_BIN_FILESIZE = l_xml_size
TABLES
i_tab_sap_data = itab
CHANGING
I_TAB_CONVERTED_DATA = l_xml_table
EXCEPTIONS
CONVERSION_FAILED = 1
OTHERS = 24
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD cl_gui_frontend_services=>gui_download
EXPORTING
bin_filesize = l_xml_size
filename = file_create
filetype = 'BIN'
CHANGING
data_tab = l_xml_table
EXCEPTIONS
OTHERS = 24.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
write : 'INTERNAL TABLE DATA IS SUCCESSFULLY DOWNLOADED TO LOCATION', file_create .
Thanks. -
What are the function modules used in CRM_ORDER_STATUS
Hi,
what are the function modules used in CRM_ORDER_STATUS(BADI) IN THIS METHOD AFTER_CHANGE...Hi,
http://scn.sap.com/thread/3202739
AFTER_CHANGE
ABAP ABAP Code
Follow-Up Action After Status Change
BEFORE_CHANGE
ABAP ABAP Code
Checks for Status Changeability
Sample code to set date on status change ------
INCLUDE crm_direct.
DATA : ls_status TYPE crmt_status_wrk.
DATA : lv_process_type TYPE crmt_process_type.
DATA : lit_appointment TYPE crmt_appointment_wrkt.
DATA : wa_appointment TYPE crmt_appointment_wrk.
DATA : ls_appoint TYPE crmt_appointment_com.
DATA : lt_appoint TYPE crmt_appointment_comt.
DATA : ls_input_field TYPE crmt_input_field.
DATA : lt_input_field TYPE crmt_input_field_tab.
DATA : ls_fieldnames TYPE crmt_input_field_names.
DATA : lt_fieldnames TYPE crmt_input_field_names_tab.
DATA : lt_exception TYPE crmt_exception_t.
DATA : lv_timestamp TYPE sc_tstfro.
DATA : lt_header_guid TYPE crmt_object_guid_tab.
DATA : lt_req_objects TYPE crmt_object_name_tab.
ls_status = is_status_wrk.
*Get process type
CALL FUNCTION 'CRM_INTLAY_GET_PROCESS_TYPE'
EXPORTING
iv_orderadm_h_guid = ls_status-guid
IMPORTING
ev_process_type = lv_process_type.
* Check process type
IF lv_process_type = 'ZZZ'.
INSERT ls_status-guid INTO TABLE lt_header_guid.
INSERT gc_object_name-appointment INTO TABLE lt_req_objects.
**Get appoinment data
CALL FUNCTION 'CRM_ORDER_READ'
EXPORTING
it_header_guid = lt_header_guid
iv_mode = gc_mode-display
it_requested_objects = lt_req_objects
IMPORTING
et_appointment = lit_appointment
EXCEPTIONS
document_not_found = 1
error_occurred = 2
document_locked = 3
no_change_authority = 4
no_display_authority = 5
no_change_allowed = 6
OTHERS = 7.
IF sy-subrc NE 0.
EXIT.
ENDIF.
*read item level data
READ TABLE lit_appointment INTO wa_appointment WITH KEY ref_kind = 'B'.
IF sy-subrc = 0.
* *Time-stamp set to as per current date and time.
CONVERT DATE sy-datum TIME sy-uzeit INTO TIME STAMP lv_timestamp
TIME ZONE sy-zonlo.
*Fill appoinment structure
ls_appoint-ref_guid = wa_appointment-ref_guid."appoinment gid
ls_appoint-ref_kind = 'B'."Item
ls_appoint-ref_handle = '0000000000'.
ls_appoint-appt_type = 'ZSERV_CLOSE'."c_appt_type .
ls_appoint-timestamp_from = lv_timestamp.
ls_appoint-timezone_from = 'GMTUK'."time zone
ls_appoint-mode = ''.
ls_appoint-rule_name = 'TODAY'.
INSERT ls_appoint INTO TABLE lt_appoint.
ls_input_field-ref_guid = wa_appointment-ref_guid.
ls_input_field-ref_kind = 'B'.
ls_input_field-objectname = 'APPOINTMENT'.
ls_input_field-logical_key = 'ZSTATUS_NEW'.
*Fill input fields
ls_fieldnames-fieldname = 'TIMESTAMP_FROM'.
INSERT ls_fieldnames INTO TABLE ls_input_field-field_names.
INSERT ls_input_field INTO TABLE lt_input_field.
CLEAR lt_fieldnames[].CLEAR ls_fieldnames. CLEAR ls_input_field.
*To update date
CALL FUNCTION 'CRM_APPT_MAINTAIN_MULTI_OW'
EXPORTING
iv_ref_guid = wa_appointment-ref_guid
iv_ref_kind = 'B'
it_appointment_com = lt_appoint
CHANGING
ct_input_fields = lt_input_field
EXCEPTIONS
OTHERS = 1.
ENDIF.
ENDIF.
Standard BADI Order_Save will take care to save into database.
Regards,
Sumeet -
What are the function modules used in interactive ALV and parameters?
what are the function modules used in interactive ALV and parameters?
hi sunil
check these links,
About ALV:
http://www.geocities.com/mpioud/Abap_programs.html
ALV Group Heading
http://www.sap-img.com/fu037.htm
and few more,
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
2. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
3. How do I add subtotals (I have problem to add them)...
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
4. How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
5. How to print page number / total number of pages X/XX in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
http://www.sapfans.com/forums/viewtopic.php?t=64320
http://www.sapfans.com/forums/viewtopic.php?t=44477
7. How can I set the cell color in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=52107
8. How do I print a logo/graphics in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=81149
http://www.sapfans.com/forums/viewtopic.php?t=35498
http://www.sapfans.com/forums/viewtopic.php?t=5013
9. How do I create and use input-enabled fields in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=84933
http://www.sapfans.com/forums/viewtopic.php?t=69878
10. How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
11. How can I display an icon in ALV? (Common requirement is traffic light icon).
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
12. How can I display a checkbox in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=88376
http://www.sapfans.com/forums/viewtopic.php?t=40968
http://www.sapfans.com/forums/viewtopic.php?t=6919
also run the folowing code and see
check this sample code.you will be well versed with all the events of a interactive alv report.mark points if useful.
*& Report ZALV4_INTERACTIVE *
*& interactive alvs *
REPORT ZALV4_INTERACTIVE NO STANDARD PAGE HEADING
MESSAGE-ID ZMSG
LINE-COUNT 37(3)
LINE-SIZE 134.
TYPE-POOLS : SLIS.
TABLES DECLARATION ********************
TABLES : VBRK, " BILLING MASTERS TABLE
VBRP. " BILLING ITEM TABLE
TYPES DECLARATION ********************
TYPES : BEGIN OF TY_VBRK, " types for billing masters table
VBELN TYPE VBRK-VBELN, " billing document
WAERK TYPE VBRK-WAERK, " document currency
VKORG TYPE VBRK-VKORG, " sales organization
FKDAT TYPE VBRK-FKDAT, " billing date
BUKRS TYPE VBRK-BUKRS, " company code
BUTXT TYPE T001-BUTXT, " company name
NETWR TYPE VBRK-NETWR, " net currency value
LINE_COLOR(4) TYPE C,
END OF TY_VBRK.
TYPES : BEGIN OF TY_VBRP, " types for billing document item data
POSNR TYPE VBRP-POSNR, " billing item
FKIMG TYPE VBRP-FKIMG, " actual invoiced quantitty
VRKME TYPE VBRP-VRKME, " sales unit
NETWR TYPE VBRP-NETWR, " net currency value
MATNR TYPE VBRP-MATNR, " material number
ARKTX TYPE VBRP-ARKTX, " short text for sales order item
END OF TY_VBRP.
FIELD CATALOG ********************
DATA : WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
WA_FIELDCAT1 TYPE SLIS_FIELDCAT_ALV.
LAYOUT DECLARATION ********************
DATA : WA_LAYOUT TYPE SLIS_LAYOUT_ALV,
WA_LAYOUT1 TYPE SLIS_LAYOUT_ALV.
EVENTS DECLARATION ********************
DATA : TY_EVENTS TYPE SLIS_ALV_EVENT,
IT_EVENTS TYPE SLIS_T_EVENT.
PF STATUS ********************
DATA : PF_STATUS TYPE SLIS_FORMNAME VALUE 'SET_PF_STATUS'.
USER COMMAND ********************
DATA : USER_COMMAND TYPE SLIS_FORMNAME VALUE 'SET_USER_COMMAND',
R_UCOMM LIKE SY-UCOMM.
INTERNAL TABLES ********************
DATA : IT_VBRK TYPE TABLE OF TY_VBRK, "internal table for billing master
IT_VBRP TYPE TABLE OF TY_VBRP, "internal table for billing item
*internal table for field catalog
IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
IT_FIELDCAT1 TYPE SLIS_T_FIELDCAT_ALV.
WORK AREA ********************
DATA : WA_VBRK LIKE LINE OF IT_VBRK, "work area for billing master
WA_VBRP LIKE LINE OF IT_VBRP. "work area for billing item
VARIABLE DECLARATION ********************
DATA : V_DATE TYPE SY-DATUM, " variable to store date values
V_VBELN TYPE VBRK-VBELN, " variable for billing document
V_FKDAT TYPE VBRK-FKDAT, " variable for billing date
V_FLAG(1). " variable for flag
SELECTION SCREEN ********************
SELECT-OPTIONS : S_VBELN FOR VBRK-VBELN , " Billing document
S_FKDAT FOR VBRK-FKDAT, " Billing date
S_MATNR FOR VBRP-MATNR. " Material number
PARAMETERS : R1 RADIOBUTTON GROUP G1, "whole item details
R2 RADIOBUTTON GROUP G1. "selected item details
INITIALIZATION ********************
INITIALIZATION.
V_FLAG = 'X'.
V_DATE = SY-DATUM - 20.
S_FKDAT-SIGN = 'I'.
S_FKDAT-OPTION = 'EQ'.
S_FKDAT-LOW = V_DATE.
S_FKDAT-HIGH = SY-DATUM.
APPEND S_FKDAT.
SELECTION SCREEN VALIDATION ********************
AT SELECTION-SCREEN.
PERFORM CONVERSION. " performs data conversion for input
PERFORM VBELN_VALIDATE. " validating the billing document
PERFORM FKDAT_VALIDATE. " validating the billing date
START OF SELECTION ********************
START-OF-SELECTION.
SET TITLEBAR 'AAAA'.
PERFORM VBRK_POPULATE. " populating the billing master detais
PERFORM FIELDCATALOG. " designing the field catalog
PERFORM EVENTS. " performing the events for top of page
PERFORM DISP_BASICLIST." displaying the basic list
*& Form VBELN_VALIDATE
text validating the billing document
--> p1 text
<-- p2 text
FORM VBELN_VALIDATE .
IF S_VBELN IS INITIAL.
MESSAGE E000 WITH 'Make entries in all required fields'.
ELSE.
SELECT SINGLE VBELN
FROM VBRK
INTO V_VBELN
WHERE VBELN IN S_VBELN.
IF SY-SUBRC <> 0.
MESSAGE I000 WITH 'BILLING DOCUMENT DOESNT EXIST'.
ENDIF.
ENDIF.
ENDFORM. " VBELN_VALIDATE
*& Form FKDAT_VALIDATE
text validating the billing date
--> p1 text
<-- p2 text
FORM FKDAT_VALIDATE .
SELECT SINGLE FKDAT
FROM VBRK
INTO V_FKDAT
WHERE FKDAT IN S_FKDAT.
IF SY-SUBRC <> 0.
MESSAGE I000 WITH 'BILLING DATE DOESNT EXIST'.
ENDIF.
ENDFORM. " FKDAT_VALIDATE
*& Form VBRK_POPULATE
text populating the billing master details
--> p1 text
<-- p2 text
FORM VBRK_POPULATE .
DATA : LD_COLOR(1) TYPE C.
LD_COLOR = 5.
SELECT VBRK~VBELN
VBRK~WAERK
VBRK~VKORG
VBRK~FKDAT
VBRK~BUKRS
VBRK~NETWR
T001~BUTXT
FROM VBRK INNER JOIN T001
ON VBRKBUKRS = T001BUKRS
INTO CORRESPONDING FIELDS OF TABLE IT_VBRK
WHERE VBRK~VBELN IN S_VBELN AND
VBRK~FKDAT IN S_FKDAT.
LOOP AT IT_VBRK INTO WA_VBRK.
LD_COLOR = LD_COLOR + 1.
IF LD_COLOR = 8.
LD_COLOR = 1.
ENDIF.
CONCATENATE 'C' LD_COLOR '10' INTO WA_VBRK-LINE_COLOR.
MODIFY IT_VBRK FROM WA_VBRK.
ENDLOOP.
ENDFORM. " VBRK_POPULATE
*& Form CONVERSION
text data conversion to take leading zeroes into account
--> p1 text
<-- p2 text
FORM CONVERSION .
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = S_VBELN
IMPORTING
OUTPUT = S_VBELN.
ENDFORM. " CONVERSION
*& Form DISP_BASICLIST
text displaying the basic list
--> p1 text
<-- p2 text
FORM DISP_BASICLIST .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = PF_STATUS
I_CALLBACK_USER_COMMAND = USER_COMMAND
I_STRUCTURE_NAME =
IS_LAYOUT = WA_LAYOUT
IT_FIELDCAT = IT_FIELDCAT
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = 'X'
IS_VARIANT =
IT_EVENTS = IT_EVENTS
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = IT_VBRK
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " DISP_BASICLIST
*& Form FIELDCATALOG
text designing the field catalog
--> p1 text
<-- p2 text
FORM FIELDCATALOG .
WA_FIELDCAT-TABNAME = 'IT_VBRK'.
WA_FIELDCAT-FIELDNAME = 'VBELN'.
WA_FIELDCAT-SELTEXT_L = 'BILLING DOCUMENT'.
WA_FIELDCAT-COL_POS = 1.
WA_FIELDCAT-EMPHASIZE = 'C610'.
WA_FIELDCAT-KEY = 'X'.
WA_FIELDCAT-OUTPUTLEN = 20.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBRK'.
WA_FIELDCAT-FIELDNAME = 'WAERK'.
WA_FIELDCAT-SELTEXT_L = 'DOCUMENT CURRENCY'.
WA_FIELDCAT-COL_POS = 2.
WA_FIELDCAT-OUTPUTLEN = 20.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBRK'.
WA_FIELDCAT-FIELDNAME = 'VKORG'.
WA_FIELDCAT-SELTEXT_L = 'SALES ORGANIZATION'.
WA_FIELDCAT-EMPHASIZE = 'C610'.
WA_FIELDCAT-COL_POS = 3.
WA_FIELDCAT-OUTPUTLEN = 20.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBRK'.
WA_FIELDCAT-FIELDNAME = 'FKDAT'.
WA_FIELDCAT-SELTEXT_L = 'BILLING DATE'.
WA_FIELDCAT-COL_POS = 4.
WA_FIELDCAT-OUTPUTLEN = 20.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBRK'.
WA_FIELDCAT-FIELDNAME = 'BUKRS'.
WA_FIELDCAT-SELTEXT_L = 'COMPANY CODE'.
WA_FIELDCAT-COL_POS = 5.
WA_FIELDCAT-OUTPUTLEN = 20.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBRK'.
WA_FIELDCAT-FIELDNAME = 'BUTXT'.
WA_FIELDCAT-SELTEXT_L = 'COMPANY NAME'.
WA_FIELDCAT-COL_POS = 6.
WA_FIELDCAT-OUTPUTLEN = 25.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBRK'.
WA_FIELDCAT-FIELDNAME = 'NETWR'.
WA_FIELDCAT-SELTEXT_L = 'NET CURRENCY VALUE'.
WA_FIELDCAT-COL_POS = 7.
WA_FIELDCAT-OUTPUTLEN = 20.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_LAYOUT-ZEBRA = 'X'.
WA_LAYOUT-INFO_FIELDNAME = 'LINE_COLOR'.
ENDFORM. " FIELDCATALOG
*& Form SET_PF_STATUS
text set the pf status
FORM SET_PF_STATUS USING EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'Z50658_PFSTATUS' EXCLUDING EXTAB.
ENDFORM. "SET_PF_STATUS
*& Form SET_USER_COMMAND
text set the user command
FORM SET_USER_COMMAND USING R_UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
WHEN 'CLICK'.
IF R1 = 'X'.
IF NOT IT_VBRK IS INITIAL.
SELECT POSNR
FKIMG
VRKME
NETWR
MATNR
ARKTX
FROM VBRP
INTO CORRESPONDING FIELDS OF TABLE IT_VBRP
FOR ALL ENTRIES IN IT_VBRK
WHERE VBELN = IT_VBRK-VBELN.
IF SY-SUBRC <> 0.
MESSAGE I000 WITH ' NO BILLING DETAILS FOUND'.
ELSE.
IF V_FLAG = 'X'.
PERFORM DET_FIELDCATALOG.
V_FLAG = ''.
ENDIF.
PERFORM DET_LISTDISPLAY.
ENDIF.
ENDIF.
ENDIF.
IF R2 = 'X'.
READ TABLE IT_VBRK INTO WA_VBRK INDEX RS_SELFIELD-TABINDEX.
IF SY-SUBRC = 0.
SELECT SINGLE POSNR
FKIMG
VRKME
NETWR
MATNR
ARKTX
FROM VBRP
INTO CORRESPONDING FIELDS OF WA_VBRP
WHERE VBELN = WA_VBRK-VBELN.
ENDIF.
APPEND WA_VBRP TO IT_VBRP.
ENDIF.
IF V_FLAG = 'X'.
PERFORM DET_FIELDCATALOG. "designing the field catalog for items
V_FLAG = ''.
ENDIF.
PERFORM DET_LISTDISPLAY. "displaying the secondary list
WHEN 'BACK'.
LEAVE TO SCREEN 0.
WHEN 'UP'.
LEAVE TO SCREEN 0.
WHEN 'CANCEL'.
CALL TRANSACTION 'SE38'.
ENDCASE.
ENDFORM. "SET_USER_COMMAND
*& Form DET_FIELDCATALOG
text designing the field catalog for item details
--> p1 text
<-- p2 text
FORM DET_FIELDCATALOG .
WA_FIELDCAT1-TABNAME = 'IT_VBRP'.
WA_FIELDCAT1-FIELDNAME = 'POSNR'.
WA_FIELDCAT1-SELTEXT_L = 'BILLING ITEM'.
WA_FIELDCAT1-COL_POS = 1.
WA_FIELDCAT1-OUTPUTLEN = 20.
APPEND WA_FIELDCAT1 TO IT_FIELDCAT1.
CLEAR WA_FIELDCAT1.
WA_FIELDCAT1-TABNAME = 'IT_VBRP'.
WA_FIELDCAT1-FIELDNAME = 'FKIMG'.
WA_FIELDCAT1-SELTEXT_L = 'INVOICE QUANTITY'.
WA_FIELDCAT1-COL_POS = 2.
WA_FIELDCAT1-OUTPUTLEN = 20.
APPEND WA_FIELDCAT1 TO IT_FIELDCAT1.
CLEAR WA_FIELDCAT1.
WA_FIELDCAT1-TABNAME = 'IT_VBRP'.
WA_FIELDCAT1-FIELDNAME = 'VRKME'.
WA_FIELDCAT1-SELTEXT_L = 'SALES UNIT'.
WA_FIELDCAT1-COL_POS = 3.
WA_FIELDCAT1-OUTPUTLEN = 20.
APPEND WA_FIELDCAT1 TO IT_FIELDCAT1.
CLEAR WA_FIELDCAT1.
WA_FIELDCAT1-TABNAME = 'IT_VBRP'.
WA_FIELDCAT1-FIELDNAME = 'NETWR'.
WA_FIELDCAT1-SELTEXT_L = 'NET CURRENCY VALUE'.
WA_FIELDCAT1-COL_POS = 4.
WA_FIELDCAT1-OUTPUTLEN = 20.
APPEND WA_FIELDCAT1 TO IT_FIELDCAT1.
CLEAR WA_FIELDCAT1.
WA_FIELDCAT1-TABNAME = 'IT_VBRP'.
WA_FIELDCAT1-FIELDNAME = 'MATNR'.
WA_FIELDCAT1-SELTEXT_L = 'MATERIAL NUMBER'.
WA_FIELDCAT1-COL_POS = 5.
WA_FIELDCAT1-OUTPUTLEN = 20.
APPEND WA_FIELDCAT1 TO IT_FIELDCAT1.
CLEAR WA_FIELDCAT1.
WA_FIELDCAT1-TABNAME = 'IT_VBRP'.
WA_FIELDCAT1-FIELDNAME = 'ARKTX'.
WA_FIELDCAT1-SELTEXT_L = 'SALES ORDER ITEM'.
WA_FIELDCAT1-COL_POS = 6.
WA_FIELDCAT1-OUTPUTLEN = 20.
APPEND WA_FIELDCAT1 TO IT_FIELDCAT1.
CLEAR WA_FIELDCAT1.
WA_LAYOUT1-ZEBRA = 'X'.
ENDFORM. " DET_FIELDCATALOG
*& Form DET_LISTDISPLAY
text displaying the secondary list
--> p1 text
<-- p2 text
FORM DET_LISTDISPLAY .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_STRUCTURE_NAME =
IS_LAYOUT = WA_LAYOUT1
IT_FIELDCAT = IT_FIELDCAT1
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS = IT_EVENTS
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = IT_VBRP
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CLEAR IT_VBRP[].
ENDFORM. " DET_LISTDISPLAY
*& Form EVENTS
text
--> p1 text
<-- p2 text
FORM EVENTS .
CLEAR TY_EVENTS.
TY_EVENTS-NAME = SLIS_EV_TOP_OF_PAGE.
TY_EVENTS-FORM = 'TOP_OF_PAGE'.
APPEND TY_EVENTS TO IT_EVENTS.
ENDFORM. " EVENTS
*& Form TOP_OF_PAGE
text
FORM TOP_OF_PAGE.
SKIP.
ULINE.
WRITE :/2 ' DATE :', SY-DATUM,
45 'INTELLIGROUP ASIA PVT LTD',
110 'TIME :', SY-UZEIT.
WRITE : /3 'USER :', SY-UNAME,
45 'TITLE :', SY-TITLE,
110 'PAGE :', SY-PAGNO.
ULINE.
SKIP.
ENDFORM. "TOP_OF_PAGE
Cheers
navjot
Reward with points if it is helpful
Message was edited by:
navjot sharma -
What are function modules used in alv,and its explanation
what are function modules used in alv,and its explanation
hi..
The important function modules are
Reuse_alv_fieldcatalog_merge
Reuse_alv_list_display
Reuse_alv_events_get
Reuse_alv_grid_display
Reuse_alv_commentary_write.
<b>REUSE_ALV_FIELDCATALOG_MERGE</b>
This function module is used to populate a field catalog which is essential to display the data in ALV.
If the output data is from a single dictionary table and all the columns are selected, then we need not exclusively create the field catalog. Its enough to mention the table name as a parameter (I_structure_name) in the REUSE_ALV_LIST_DISPLAY. But in other cases we need to create it.
Note : Fieldcatalog can be filled manually also by filling up all the required details into the internal table
The important parameters are:
1. Export:
a. I_program_name : report id
b. I_internal_tabname : the internal output table
c. I_inclname : include or the report name where all
the dynamic forms are handled.
2. Changing
ct_fieldcat : an internal table with the type
SLIS_T_FIELDCAT_ALV which is declared in the
type pool SLIS.
<b>REUSE_ALV_LIST_DISPLAY</b>
This is the function module which prints the data.
The important parameters are:
1. Export:
I_callback_program : report id
I_bypassing_buffer : X
I_buffer_active :
I_callback_pf_status_set : routine where a user can set
his own pf status or change the
functionality of the existing pf status.
I_callback_user_command : routine where the function codes are
handled.
I_structure name : name of the dictionary table
Is_Layout : structure to set the layout of the report
It_fieldcat : internal table with the list of all fields and their
attributes which are to be printed (this table
can be populated automatically by the function
REUSE_ALV_FIELDCATALOG_MERGE
It_events : internal table with a list of all possible events
of ALV and their corresponding form names.
2. Tables:
a. t_outtab : internal table with the data to be output
<b>REUSE_ALV_EVENTS_GET: </b>
Returns table of possible events for a a list type
1. Import:
Et_Events :
The event table is returned with all possible CALLBACK events for the specified list type (column NAME). For events to be processed by the Callback, their FORM field must be filled. If the field is initialized, the event is ignored. The entry can be read from the event table, the field FORM filled and the entry modified using constants from the type pool SLIS.
2. Export:
I_list_type:
0 = simple list REUSE_ALV_LIST_DISPLAY
1 = hierarchical-sequential list
REUSE_ALV_HIERSEQ_LIST_DISPLAY
2 = simple block list REUSE_ALV_BLOCK_LIST_APPEND
3 = hierarchical-sequential block list
REUSE_ALV_BLOCK_LIST_HS_APPEND
<b>REUSE_ALV_GRID_DISPLAY</b>
A new function from 4.6 version, to display the results in grid rather than a
preview.
Parameters : same as reuse_alv_list_display
<b>REUSE_ALV_COMMENTARY_WRITE</b>
This is used in the Top-of-page event to print the headings and other
comments for the list.
It_list_commentary : Internal table with the headings of the type
slis_t_listheader.
This internal table has three fields:
Typ : H - header, S - selection, A - action
Key : only when typ is S.
Info : the text to be printed
<b>plz reward pts if helpful.</b>
regards
vijay. -
List of function module used for cluster table
hi,
I want to know the list of all function module used th extract data from cluster table such as such MONI, STXL.
thanks,
john diasWhen inside SE11 for MONI, lets say, press the where-used list button and select the option for FUNCTION MODULE INTERFACES to see a list of FMs that take a structure of type MONI as input/output parameter. Although this will not give an exhaustive list of FMs, it will assist you to a good extent.
Additionally, you can try FM APPLICATION_DATA_GET.
For STXL, take a look at FM READ_TEXT and associated include file LSTXDUXX for more functions in this function group SAPLSTXD.
Regards
Message was edited by: Shehryar Khan
Message was edited by: Shehryar Khan -
Testing of function module using secatt ,st30 st03n
Hi Gurus ,
i am new to sap testing , kindly let me know the complete process of testing a function module using ecatt ,st30 and st03n s
kindly provide me with links for the same.
thanks in advance ,try this link for some information regarding eCatt tetsing using ST30.
Using ST30 to run ECATT
thanks
Venkat -
Transaction code to assign the function module to the process code
Hi,
What is the transaction to assign the function module to the process codeHello Preethi,
Try with these Tcodes:
<b>
WE41 0000 Process codes, outbound
WE42 RSECODIN 1000 Process codes, inbound
WE43 0000 Funct.module: Status record display</b>
If useful reward.
Vasanth -
To know thelist of bapi's and function modules used for transaction IH10
I need to know thelist of bapi's and function modules used for transaction in order to use these FM or BAPI in reading some fields of equipment master and functional loocation.Can any one suggest me some methods...or do i need to write a report for the same.
hi,
provide report name (here: RIEQUI20)
goto se38 - utilities - cross reference - function modules
or use report RPR_ABAP_SOURCE_SCAN
with search string call function
A.
Message was edited by:
Andreas Mann -
What is the function module used to send an email
hi
what is the function module used to send an emailHello,
Try this, It will help you. Sure.
Regards,
Rakesh.
CLASS cl_abap_char_utilities DEFINITION LOAD.
CONSTANTS:
con_tab TYPE c VALUE cl_abap_char_utilities=>horizontal_tab,
con_cret TYPE c VALUE cl_abap_char_utilities=>cr_lf.
TYPES: BEGIN OF typ_item,
asno(10) TYPE c,
matnr TYPE mseg-matnr,
maktx TYPE makt-maktx,
menge TYPE mseg-menge,
meins TYPE mseg-meins,
END OF typ_item.
DATA: wrk_menge(17) TYPE c.
DATA: sum_srno TYPE i VALUE 0.
DATA: wrk_srno TYPE n.
*Internal tables
DATA: it_std_objhdr TYPE TABLE OF solisti1.
DATA: it_std_objcnt TYPE TABLE OF solisti1.
DATA: it_std_rcvlst TYPE TABLE OF somlreci1.
DATA: it_std_objtxt TYPE TABLE OF solisti1..
DATA: it_std_objpack TYPE TABLE OF sopcklsti1 .
DATA: it_std_cntbin TYPE TABLE OF solisti1.
DATA: it_std_items TYPE TABLE OF typ_item.
DATA: is_items LIKE LINE OF it_std_items.
* DATA: it_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE.
* DATA: wa_attachment TYPE solisti1.
* Internal structures
DATA: is_docdata LIKE sodocchgi1.
DATA: is_objhdr LIKE LINE OF it_std_objhdr.
DATA: is_objcnt LIKE LINE OF it_std_objcnt.
DATA: is_rcvlst LIKE LINE OF it_std_rcvlst.
DATA: is_objtxt LIKE LINE OF it_std_objtxt.
DATA: is_objpack LIKE LINE OF it_std_objpack.
DATA: is_cntbin LIKE LINE OF it_std_cntbin.
*Work variables
DATA: wrk_lines TYPE i.
is_docdata-obj_descr = 'Movement of parts to processor'.
*Cover letter of the mail
is_objtxt = 'Dear Sir,'.
APPEND is_objtxt TO it_std_objtxt.
is_objtxt = ' '.
APPEND is_objtxt TO it_std_objtxt.
is_objtxt = text-001.
APPEND is_objtxt TO it_std_objtxt.
is_objtxt = text-002.
APPEND is_objtxt TO it_std_objtxt.
is_objtxt = text-003.
APPEND is_objtxt TO it_std_objtxt.
is_objtxt = ' '.
APPEND is_objtxt TO it_std_objtxt.
is_objtxt = 'Thanks n Regards,'.
APPEND is_objtxt TO it_std_objtxt.
is_objtxt = ' '.
APPEND is_objtxt TO it_std_objtxt.
is_objtxt = 'abc MOTORS'.
APPEND is_objtxt TO it_std_objtxt.
* Write Packing List (Main)
DESCRIBE TABLE it_std_objtxt LINES wrk_lines.
READ TABLE it_std_objtxt INTO is_objtxt INDEX wrk_lines.
is_docdata-doc_size = ( wrk_lines - 1 ) * 255 + STRLEN( is_objtxt ).
CLEAR is_objpack-transf_bin.
is_objpack-head_start = 1.
is_objpack-head_num = 0.
is_objpack-body_start = 1.
is_objpack-body_num = wrk_lines.
is_objpack-doc_type = 'RAW'.
APPEND is_objpack TO it_std_objpack.
BREAK-POINT.
*loop for selecting the data into contents bin//// Excel.
CONCATENATE 'SRNO' 'ASN no:' 'PARTNO' 'PART DESCRIPTION'
'QUANTITY' 'UNIT' INTO is_cntbin
SEPARATED BY con_tab.
CONCATENATE con_cret is_cntbin INTO is_cntbin.
APPEND is_cntbin TO it_std_cntbin.
LOOP AT it_std_items INTO is_items.
sum_srno = sum_srno + 1.
wrk_menge = is_items-menge.
wrk_srno = sum_srno.
CONCATENATE wrk_srno is_items-asno is_items-matnr is_items-maktx
wrk_menge is_items-meins
INTO is_cntbin SEPARATED BY con_tab.
CONCATENATE con_cret is_cntbin INTO is_cntbin.
APPEND is_cntbin TO it_std_cntbin.
ENDLOOP.
*To be implemented later
* CONCATENATE 'EBELN' 'EBELP' 'AEDAT' 'MATNR'
* INTO it_attach SEPARATED BY con_tab.
* CONCATENATE con_cret it_attach INTO it_attach.
* APPEND it_attach.
* LOOP AT it_ekpo INTO wa_charekpo.
* CONCATENATE wa_charekpo-ebeln wa_charekpo-ebelp
* wa_charekpo-aedat wa_charekpo-matnr
* INTO it_attach SEPARATED BY con_tab.
* CONCATENATE con_cret it_attach INTO it_attach.
* APPEND it_attach.
* ENDLOOP.
*ENDFORM. " BUILD_XLS_DATA_TABLE
DESCRIBE TABLE it_std_cntbin LINES wrk_lines.
READ TABLE it_std_cntbin INTO is_cntbin INDEX wrk_lines.
is_objpack-doc_size = ( wrk_lines - 1 ) * 255 +
STRLEN( is_cntbin ).
is_objpack-transf_bin = 'X'.
is_objpack-head_start = 1.
is_objpack-head_num = 0.
is_objpack-body_start = 1.
is_objpack-body_num = wrk_lines.
is_objpack-doc_type = 'XLS'.
is_objpack-obj_name = 'Document File'.
is_objpack-obj_descr = 'Document File'.
APPEND is_objpack TO it_std_objpack.
*Start of testing code
IF sy-uname = 'DEVELOPER'.
is_rcvlst-receiver = sy-uname.
is_rcvlst-rec_type = 'B'.
is_rcvlst-express = 'X'.
APPEND is_rcvlst TO it_std_rcvlst.
CLEAR is_rcvlst.
ENDIF.
*End of testing code
*Creating the recepient list
is_rcvlst-receiver = '[email protected]'.
is_rcvlst-rec_type = 'U'.
is_rcvlst-express = 'X'.
is_rcvlst-com_type = 'INT'.
APPEND is_rcvlst TO it_std_rcvlst.
is_rcvlst-receiver = '[email protected]'.
is_rcvlst-copy = 'X'.
is_rcvlst-rec_type = 'U'.
is_rcvlst-express = 'X'.
is_rcvlst-com_type = 'INT'.
APPEND is_rcvlst TO it_std_rcvlst.
BREAK-POINT.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = is_docdata
put_in_outbox = 'X'
commit_work = 'X'
* IMPORTING
* SENT_TO_ALL =
* NEW_OBJECT_ID =
TABLES
packing_list = it_std_objpack
* OBJECT_HEADER =
contents_bin = it_std_cntbin
contents_txt = it_std_objtxt
* CONTENTS_HEX =
* OBJECT_PARA =
* OBJECT_PARB =
receivers = it_std_rcvlst
* EXCEPTIONS
* TOO_MANY_RECEIVERS = 1
* DOCUMENT_NOT_SENT = 2
* DOCUMENT_TYPE_NOT_EXIST = 3
* OPERATION_NO_AUTHORIZATION = 4
* PARAMETER_ERROR = 5
* X_ERROR = 6
* ENQUEUE_ERROR = 7
* OTHERS = 8
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
COMMIT WORK. -
Function Modules Used in BW? (Two Questions)
I have two function Modules that were used in SAP R3:
G_SET_GET_ID_FROM_NAME
G_SET_GET_ALL_VALUES
G_SET_TREE_IMPORT
Question 1) Are there cross referenced FMs in BW that we can use in place of these?
Question 2) Is here a XREF lift of Cross-Functional Function Modules that can be used - or similar- in BW that were used in SAP/R3?
Thank-You.hi aravind,
the main Function modules used in smart forms are
1. SSF_FUNCTION_MODULE_NAME.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'Z_FL004_BANK_DRAFT'
IMPORTING
fm_name = fm_name.
CALL FUNCTION fm_name
EXPORTING
rgds
anver.
if helped mark points. -
Function module to get the name of all the function module used
I want to populate a internal table with the name of all function module used in the submitted program?? Is there any function module which return the name of all the function module used?
Hi Priya
Try this one RPY_FUNCTIONMODULE_READ.
Ranga
Maybe you are looking for
-
Deleting a single item list in dropdown choices
Perhaps I am just not seeing the obvious simple solution but how do I provide a user the option to simply delete his choice in a dropdown selection. I have added a clear form button to wipe all form data, but how do I allow a user once he/she has sel
-
I lost my iphone 4 white yesterday (june 21st, 2011)
On June 21st, 2011, I lost it at Fair oaks Mall in Fairfax, Virginia in Forever 21 store around 6:15-6:30pm. While I was trying on rings, I placed it on the table next to me, and when I realized my phone was gone after I purchased my items it was alr
-
Best way to parse a subtitle file (.srt) ?
Hey there! I'm a total newbie with Cocoa and I'm currently trying to improve my knowledge in parsing files through a simple TableView. More precisely, I'd like to parse .srt files. Those are subtitle files that can be opened with a basic text-editor.
-
Question on Captivate RH integration
Hello! I am a Captivate user and have a question about RoboHelp 6 integrating Captivate. Can anyone throw some light on whether the complete Captivate application is available via Robo Help or is just the recording features (simulation)? It will supp
-
Where's the information stored of the CLP (mycontacts)?
Hi all, I have a question to the Collaboration Launch Pad CLP, for example accessing the CLP by http://<myPortal>/irj/servlet/prt/portal/prtroot/com.sap.netweaver.coll.shared.ui.CollaborationLaunchPad I'm able to add Contact Lists / Contacts / Room m