Function "No. of rows" in Table
I cannot select "no. of rows" in a table, so always all rows are displayed at one page.
What can I do to enable this function?
Hi,
I would like to update you that the function "No. of rows" in Table will be available in Flex 2.
In general we recommended not to use WD.
Thanks,
Anat
Message was edited by:
Anat Ozerbach
Similar Messages
-
How do I deselect a row in table control on scrren?
Hello All:
How do I write the code to deselect a row in table control on a screen? This is in dialog programming.
Thanks.
MithunI thought that the descriptions given in the Help are clear.
The ADDRESS function constructs a cell address string from separate row, column, and table identifiers.
ADDRESS(row, column, [type], [style], [table])
row: The row number of the address.
column: The column number of the address.
I dropped the comments about type, style and table as I don't use them here.
=IF(ISBLANK(INDIRECT(ADDRESS(ROW(),1))),"",INDIRECT(ADDRESS(ROW(),2))*INDIRECT(A DDRESS(ROW(),3)))
INDIRECT(ADDRESS(ROW(),1))
returns the contents of the cell whose row is the same than the one containing the formula \[the row number is given by ROW()] and whose column is the 1st one)
INDIRECT(ADDRESS(ROW(),2))
returns the contents of the cell whose row is the same than the one containing the formula \[the row number is given by ROW()] and whose column is the 2nd one)
INDIRECT(ADDRESS(ROW(),3))
returns the contents of the cell whose row is the same than the one containing the formula \[the row number is given by ROW()] and whose column is the 3rd one)
In short, when the formula is applied in row 9 it behaves like:
=IF(ISBLANK(A9),"",B9*C9)
The long syntax is required to be able to enter it only once in the header cell as described in the Help and in the PDF User Guide in a chapter entitled "Applying a Formula Once to Cells in a Column or Row".
As we want to use such a formula, it would be odd to destroy its ability using a different formula in a standard bottom row.
More, in a footer row, we may use shorter formulas than in other rows.
In a standard row 10 we would have to write =SUM(D2:D9)
in a footer row we enter only =SUM(D) which add the contents of every standard cells of the column D.
This feature is also described in the named resources.
Yvan KOENIG (from FRANCE vendredi 3 octobre 2008 18:21:13) -
Snap all rows in table/document
I've been working through the book "Scripting InDesign with JavaScript." The script is originally for snapping columns, but I'm trying to snap all the rows in tables so I've changed the references to "rows." I've worked through to this point, but it still snaps only the row where the cursor is located. I'm not sure what I need to alter in order for it to snap every row.
//from Scripting InDesign with JavaScript
var myStories = app.activeDocument.stories
for( var i = 0; i < myStories.length; i++ )
for( var j = 0; j < myStories[i].tables.length; j++ )
for( var k = 0; k < myStories[i].tables[j].rows.length; k++ )
snapRow( myStories[i].tables[j].rows[k] )
function snapRow( myRow )
// get the size of em space
var em = myRow.cells[0].insertionPoints[0].pointSize;
myRow.height = '2p3';
// get horizontal offset of last insertion point in each cell
var myRightPosArray = myRow.cells.everyItem(
).insertionPoints[-1].horizontalOffset
// find the biggest value
var longest = maxArray( myRightPosArray )
// get position of left side of Row
var myLeftPos = myRow.cells[0].insertionPoints[0].horizontalOffset
// set Row height
myRow.height = (( longest - myLeftPos ) + em )
function getRow()
var mySel = app.selection[0];
if( mySel.parent.constructor.name == 'Cell' )
return mySel.parent.parentRow
else if( mySel.constructor.name == 'Cell' )
return mySel.parentRow;
alert( 'Cursor not in a table\ror illegal selection' );
exit();
function maxArray( myArray )
var temp = 0
for( var i in myArray )
temp = Math.max( temp, myArray[i] )
return tempHi,
Exam a function snapRow() ==> snapColumn() in original, probably.
It is a horizontalOffset property used to find a widest cell in column.
This is useless if the goal is to snap row's height.
There is .autoGrow property useful for rows.
You could combine this with maximumHeight & minimumHeight (or not)
So simplest way :
snapRow(myRow) {
myRow.autoGrow = true;
getRow() function is useless too
Jarek -
BDC : to select different rows in table control
Hi,
I have to fill many rows in table control and want to select different row one by one in increasing order which rows are filled in BDC.
Can anybody suggest me with coding...
thanks
nareshHi ,
I am attaching sample code for BDC transaction code is : FV11 , This code is also contains poage down concepts . By using this page down concept you can add number of item fields
Program Name : ZFV11_NEW
Program Description : To Upload Condition Records-FV11
Author : Jagadish
Start Date : 11/06/2007
REPORT zfv11
NO STANDARD PAGE HEADING LINE-SIZE 255.
DO NOT CHANGE - the generated data section - DO NOT CHANGE ***
If it is nessesary to change the data section use the rules:
1.) Each definition of a field exists of two lines
2.) The first line shows exactly the comment
'* data element: ' followed with the data element
which describes the field.
If you don't have a data element use the
comment without a data element name
3.) The second line shows the fieldname of the
structure, the fieldname must consist of
a fieldname and optional the character '_' and
three numbers and the field length in brackets
4.) Each field must be type C.
Generated data section with specific formatting - DO NOT CHANGE ***
TABLES : t100.
DATA: BEGIN OF record OCCURS 0,
data element: KSCHA
kschl(004), "Condition Type
data element: SELKZ_LIST
selkz(001),
data element: WERKS_D
werks(004), "Plant
data element: ELIFN
lifnr(010), "Vendor
data element: MATNR
matnr(018), "Material No.
data element: KBETR_KOND
kbetr(016), "Amount
data element: KODATAB
datab(010), "Condition Validity Date from
data element: KODATBI
datbi(010), "Condition Validity To
data element: MWSKZ
mwsk1(002),
END OF record.
DATA : BEGIN OF it_new OCCURS 0, " Internal Table for Header Data
kschl(004),
werks(004),
lifnr(010),
END OF it_new.
DATA : BEGIN OF it_item OCCURS 0, " Internal table for Item Data
werks(004),
lifnr(010),
matnr(018),
kbetr(016),
datab(010),
datbi(010),
mwsk1(002),
END OF it_item.
DATA : cnt(2) TYPE n,
fld(25) TYPE c.
TYPE-POOLS: truxs.
DATA: it_raw TYPE truxs_t_text_data.
DATA : n TYPE n.
DATA:
BEGIN OF t_data OCCURS 0,
data TYPE string,
END OF t_data.
DATA:BEGIN OF it_mess OCCURS 0,
msgtyp(5),
lms(200),
msgv1(50),
END OF it_mess.
DATA : p_mode TYPE c.
DATA:it_msgtab TYPE STANDARD TABLE OF bdcmsgcoll WITH HEADER LINE,
it_msgtab1 TYPE STANDARD TABLE OF bdcmsgcoll WITH HEADER LINE.
DATA : l_mstring(150).
DATA : BEGIN OF bdcdata OCCURS 0.
INCLUDE STRUCTURE bdcdata.
DATA: END OF bdcdata.
PARAMETERS : p_file1 LIKE rlgrap-filename.
INITIALIZATION.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file1.
PERFORM file_selection.
PERFORM data_upload.
PERFORM table_control.
LOOP AT it_new.
REFRESH bdcdata.
PERFORM bdc_dynpro USING 'SAPMV13A' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RV13A-KSCHL'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RV13A-KSCHL'
it_new-kschl.
PERFORM bdc_dynpro USING 'SAPLV14A' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RV130-SELKZ(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=WEIT'.
PERFORM bdc_dynpro USING 'SAPMV13A' '1363'.
PERFORM bdc_field USING 'BDC_CURSOR'
'KONP-KBETR(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'KOMG-WERKS'
it_new-werks.
PERFORM bdc_field USING 'KOMG-LIFNR'
it_new-lifnr.
DATA: "X(5) TYPE N,
N(5) TYPE N.
N = 0.
LOOP AT it_item.
N = N + 1.
ENDLOOP.
"X = 1.
CNT = 1.
DO N TIMES.
IF CNT > 19.
perform bdc_field using 'BDC_OKCODE' 'KOMG-MATNR(01)'.
perform bdc_field using 'BDC_OKCODE' '=P+'.
PERFORM bdc_dynpro USING 'SAPMV13A' '1363'.
CNT = 1.
ENDIF.
cnt = 1.
LOOP AT it_item WHERE werks EQ it_new-werks AND lifnr EQ it_new-lifnr . "FROM x TO x.
CONCATENATE 'KOMG-MATNR(' cnt ')' INTO fld.
PERFORM bdc_field USING fld it_item-matnr.
CONCATENATE 'KONP-KBETR(' cnt')' INTO fld.
PERFORM bdc_field USING fld it_item-kbetr.
CONCATENATE 'RV13A-DATAB(' cnt ')' INTO fld.
PERFORM bdc_field USING fld it_item-datab.
CONCATENATE 'RV13A-DATBI(' cnt ')' INTO fld.
PERFORM bdc_field USING fld it_item-datbi.
CONCATENATE 'KONP-MWSK1(' cnt ')' INTO fld.
PERFORM bdc_field USING fld it_item-mwsk1.
cnt = cnt + 1.
if cnt = 20.
perform bdc_field using 'BDC_OKCODE' 'KOMG-MATNR(19)'.
perform bdc_field using 'BDC_OKCODE' '=P+'.
PERFORM bdc_dynpro USING 'SAPMV13A' '1363'.
CNT = 1.
endif.
CLEAR it_item.
ENDLOOP.
ENDDO.
PERFORM bdc_dynpro USING 'SAPMV13A' '1363'.
PERFORM bdc_field USING 'BDC_CURSOR'
'KONP-MWSK1(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=SICH'.
CALL TRANSACTION 'FV11' USING bdcdata MODE 'A'
UPDATE 'S'
MESSAGES INTO it_msgtab.
CLEAR bdcdata[].
PERFORM error.
ENDLOOP.
Start new screen -Subroutine for screen s *
FORM bdc_dynpro USING program dynpro.
CLEAR bdcdata.
bdcdata-program = program.
bdcdata-dynpro = dynpro.
bdcdata-dynbegin = 'X'.
APPEND bdcdata.
ENDFORM. "BDC_DYNPRO
Insert field -Subroutine for field s *
FORM bdc_field USING fnam fval.
CLEAR bdcdata.
bdcdata-fnam = fnam.
bdcdata-fval = fval.
APPEND bdcdata.
ENDFORM. "BDC_FIELD
*& Form file_selection
FORM file_selection .
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
field_name = 'P_FILE1'
IMPORTING
file_name = p_file1.
ENDFORM. " file_selection
*& Form data_upload
FORM data_upload .
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
I_FIELD_SEPERATOR =
i_line_header = 'X'
i_tab_raw_data = it_raw
i_filename = p_file1
TABLES
i_tab_converted_data = record
EXCEPTIONS
conversion_failed = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " data_upload
*& Form error
FORM error .
LOOP AT it_msgtab.
IF it_msgtab-msgtyp = 'E'.
SELECT SINGLE * FROM t100 WHERE sprsl = it_msgtab-msgspra
AND arbgb = it_msgtab-msgid
AND msgnr = it_msgtab-msgnr.
IF sy-subrc = 0.
l_mstring = t100-text.
IF l_mstring CS '&1'.
REPLACE '&1' WITH it_msgtab-msgv1 INTO l_mstring.
REPLACE '&2' WITH it_msgtab-msgv2 INTO l_mstring.
REPLACE '&3' WITH it_msgtab-msgv3 INTO l_mstring.
REPLACE '&4' WITH it_msgtab-msgv4 INTO l_mstring.
ELSE.
REPLACE '&' WITH it_msgtab-msgv1 INTO l_mstring.
REPLACE '&' WITH it_msgtab-msgv2 INTO l_mstring.
REPLACE '&' WITH it_msgtab-msgv3 INTO l_mstring.
REPLACE '&' WITH it_msgtab-msgv4 INTO l_mstring.
ENDIF.
CONDENSE l_mstring.
it_mess-msgtyp = it_msgtab-msgtyp.
it_mess-lms = l_mstring.
it_mess-msgv1 = it_msgtab-msgv1.
APPEND it_mess.
WRITE: / it_msgtab-msgtyp, l_mstring(150).
ELSE.
WRITE: / it_msgtab.
it_mess-msgtyp = it_msgtab-msgtyp.
it_mess-lms = l_mstring.
it_mess-msgv1 = it_msgtab-msgv1.
APPEND it_mess.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM. " error
*& Form table_Control
FORM table_control .
SORT record BY lifnr matnr.
LOOP AT record.
ON CHANGE OF record-lifnr.
MOVE-CORRESPONDING record TO it_new.
APPEND it_new.
ENDON.
MOVE-CORRESPONDING record TO it_item.
APPEND it_item.
ENDLOOP.
ENDFORM. " table_Control
Reward if useful
Thanks
Jagadeesh.G -
Hi,
can i add row in the middle of the data table, not append (in the last of table)
Thanks
WalidHi!
Function appendRow(RowKey row) appends row to the end. Unfortunately function insertRow(RowKey row) is not implemented in standard cachedRowSetDataProvider, but You can extend cachedRowSetDataProvider and implement this function.
Then in you application You should call setCursorRow(RowKey row) and then insertRow(RowKey row).
Thanks,
Roman. -
Marking block of rows in table control
Hi All,
I have an requirement to mark block of rows (Like 2 to 5, 7 to 11 or 3 to 15 ) in table control to delete from the table control. This functionality is available in SM30 (Table maintenance generator) and my users want same functionality for customized dialog program.
Can any one any have an idea how to write the code for marking block of entries in table control.
Thanks in advance,
ChandraHi,
Assign a internal table field to table control place holder , whenever you select a row in the table control , internal table field value set to 'X'.
so delete the rows from the internal table where row value set to 'X'.
Sample code :
CASE OK_CODE.
WHEN 'DELETE'.
DELETE I_TAB WHERE CHK = 'X'.
ENDCASE.
check these demo programs:
RSDEMO_TABLE_CONTROL
DEMO_DYNPRO_TABLE_CONTROL_1
DEMO_DYNPRO_TABLE_CONTROL_2
RSDEMO_TABLE_CONTROL
RSDEMO02
if you want to mark the records through code , first assign a internal table field to table control first column (say buttons which we will use to select a row)
then do like this :
case sy-ucomm.
when 'MARK'.
loop at i_tab.
i_tab-chk = 'X'.
modify i_tab.
endloop.
endcase.
Regards
L Appana
Message was edited by:
L Appana -
hi
i want select rows in table,that mean i have to put radio button in front of each row in table when i select that radio button and click the go button i should able to edit that row.
please help me to devloped above functionality.
Thanks in AdvancedIt would help if you tell us your jdev version and full use case.
Why do you want to use a radio button in front of a row to just edit the row?
In 11g you can select a row and edit it directly (clickToEdit mode), or hit a button on the selected row and open a form to edit the selected row.
@Abhijit you should mention that the sample is for 10g. If the OP uses 11g this confuses matters.
Timo -
How to select all rows in table automatically after refreshing?
Hi,All
After refreshing the table,I want to select all rows,like MultipleButton's function.
How can I do?
Thanks
Smile.Hi,-Grif-
* Set the selected state for the given row groups
* displayed in the table. This functionality requires
* the 'selectId' of the tableColumn to be set.
* @param rowGroupId HTML element id of the tableRowGroup component
* @param selected Flag indicating whether components should be selected
function selectGroupRows(rowGroupId, selected) {
var table = document.getElementById("form1:table1");
table.selectGroupRows(rowGroupId, selected);
}I don't know that the parameter selected is a boolean,or the checkbox(radio button) id?
Thanks
Smile -
How to delete the row in table control with respect to one field in module pool programming?
Hi,
Can I know the way to delete the row in table control with respect to one field in module pool programming
Regards
Darshan MSHI,
I want to delete the row after the display of table control. I have created push button as delete row. If I click on this push button, the selected row should get deleted.
I have written this code,
module USER_COMMAND_9000 input.
DATA OK_CODE TYPE SY-UCOMM.
OK_CODE = SY-UCOMM.
CASE OK_CODE.
WHEN 'DELETE'.
LOOP AT lt_source INTO ls_source WHERE mark = 'X'.
APPEND LS_SOURCE TO LT_RESTORE.
DELETE TABLE LT_SOURCE FROM LS_SOURCE.
SOURCE-LINES = SOURCE-LINES - 1.
ENDLOOP.
But I'm unable to delete the selected rows, It is getting deleted the last rows eventhough I select the other row.
So I thought of doing with respect to the field. -
Merge two rows & show in a single row in table results
Hi, I need to merge 2 rows having 3 columns in a single row in table view
The cols are currently shown as :
Project NO-------(Current_Month) Revenue----------(Prior_Month) Revenue
123123 10000
20000
Revenue is a single column with revenue for diffreent Period.
10000 is for May
20000 is for April
Project NO for both are same, just the periods are different. if I am not displaying Period i need to merge the 2 rows & show as
Project NO-------(Current_Month) Revenue----------(Prior_Month) Revenue
123123 10000 20000
Please let me know how we can acheive this??
thanx
Pankaj123123 is the project number..
the above is not getting displayed properly....as the blank spaces are removed...
Please consider this -
Missing Functionality: Dunning Wizard - We need table CRD1
Hello,
Missing Functionality: Dunning Wizard - We need table CRD1 in the dunning PLD templates!!!
This Workaround is impossible.
As a workaround I suggest to store this information in the UDFs that you would create on the OCRD table that is exposed in the dunning PLD templates.keine Antwort ist auch eine Antwort
-
How to get all the index of "selected rows" in table control?
Hi Gurus,
I have a table control, wherein I need to get selected row so that I can get its respective TABIX.
I know that the event for capturing selected row is in PAI.
I also ensure that the w/ selColumn name in my screenpainter is exactly the same as my declaration in ABAP.
TOP INCLUDE
YPES: BEGIN OF Y_ZQID_CHECK,
IDNUM TYPE ZQID_CHECK-IDNUM,
WERKS TYPE ZQID_CHECK-WERKS,
MATNR TYPE ZQID_CHECK-MATNR,
LICHA TYPE ZQID_CHECK-LICHA,
LIFNR TYPE ZQID_CHECK-LIFNR,
ECOA_S TYPE ZQID_CHECK-ECOA_S,
ID_STAT TYPE ZQID_CHECK-ID_STAT,
ID_DATE TYPE ZQID_CHECK-ID_DATE,
FLAG_MAILCOA(1) TYPE C,
MARK(1) TYPE C, "Name of w/ SelColumn in ScreenPainter: T_ZQIDCHECK_DISCH-MARK
END OF Y_ZQID_CHECK.
DATA: T_ZQIDCHECK_DISCH TYPE STANDARD TABLE OF Y_ZQID_CHECK WITH HEADER LINE.
PAI
PROCESS AFTER INPUT.
* MODULE USER_COMMAND_9004.
LOOP AT T_ZQIDCHECK_DISCH.
MODULE READ_TC_DISCH .
ENDLOOP.
module READ_TC_DISCH input.
DATA: W_LINE_SEL TYPE SY-STEPL,
W_TABIX LIKE SY-TABIX.
GET CURSOR LINE W_LINE_SEL.
W_TABIX = TC_ID_ONLY-TOP_LINE + w_LINE_SEL - 1.
MODIFY T_ZQIDCHECK_DISCH INDEX TC_ID_ONLY-current_line.
If I am selecting single row, I can properly get the selected index via debug.
BUG:
When I'm selecting multiple rows in table control, only the last row is always being read inside the loop of my table control.
Please see the screenshot.
[url]http://img268.imageshack.us/img268/5739/tcselectedrows.jpg[url]
Notice in the debug screenshot, even if it's just in the 1st loop of table control, it automatically gets the 4th table control index, instead of the 2nd one.
Helpful inputs will be appreciated.
Thanks.
Jaime
Edited by: Jaime Cabanban on Dec 9, 2009 3:16 PMHi,
Are you sure that you have selected multiple line for tablecontrol in the property window of the tablecontrol.
Flowlogic.
LOOP WITH CONTROL TC_01.
Module Get_Marked.
ENDLOOP.
Module Pool
Module Get_Marked.
read the data from the internal table where mark = 'X'.
this should give you only selected records.
Endmodule.
Kindly check the tablecontrol property.
Regards,
Ranjith Nambiar -
How to delete a row of table in Word using powershell.
I want to search for a word which is present in Table. If that word is present than I want to delete that row from table.
Can anybody help me with that. The script I am using is:
$objWord = New-Object -ComObject word.application
$objWord.Visible = $True
$objDoc = $objWord.Documents.Open("C:\temp\Recipe.docx")
$FindText = "DP1"
$objSelection.Find.Execute($FindText)
$objWord.Table.Cells.EntireRow.Delete()
$objDoc.SaveAs("C:\Temp\P.docx")
$Doc.Close()Maybe try this:
$objWord = New-Object -ComObject word.application
$objWord.Visible = $True
$objWord.Documents.Open("C:\temp\Recipe.docx")
$FindText = "DP1"
$objWord.Selection.Find.Execute($FindText) | Out-Null
$objWord.Selection.SelectRow()
$objWord.Selection.Cells.Delete()
$objWord.Documents.SaveAs("C:\Temp\P.docx")
$objWord.Close()
$objWord.Quit()
[System.Runtime.InteropServices.Marshal]::ReleaseComObject([System.__ComObject]$objWord) | Out-Null
This definitely assumes the text you're trying to find only exists in a table, per your specified requirements. If it exists anywhere else, or in multiple tables, the code above is inadequate.
I hope this post has helped! -
Unable to delete a row in table control
Hi,
I'm unable to delete a row in table control.
I have defined a selection column for my table control but it is not getting value 'X' when i'm selecting a row for deletion.
Also, when I press enter, some of the columns in table control are getting initialized. I'm passing these values to the internal table along with other columns.
Please help.
Regards,
Manasee
Message was edited by: Manasee Chandorkarhi,
kindly chk this.
PROCESS BEFORE OUTPUT.
MODULE status_9010.
LOOP WITH CONTROL tab_control.
MODULE move_data_to_table.
ENDLOOP.
PROCESS AFTER INPUT.
LOOP WITH CONTROL tab_control.
MODULE move_data_from_table.
ENDLOOP.
*& Module move_data_to_table OUTPUT
This is to move the data from the internal table to the table control
MODULE move_data_to_table OUTPUT.
This is to move the data from the internal table to the table control
zmpets_mode-modecode,zmpets_range-rangeid,zmpets_servfacto-factor are column name of table control
READ TABLE int_factor INDEX tab_control-current_line.
IF sy-subrc = 0.
zmpets_mode-modecode = int_factor-modecode.
zmpets_range-rangeid = int_factor-rangeid.
zmpets_servfacto-factor = int_factor-factor.
ENDIF.
ENDMODULE. " move_data_to_table OUTPUT
*& Module move_data_from_table INPUT
Date is moved from the table control to the Internal Table
MODULE move_data_from_table INPUT.
To move the data from the table control to internal table 'INT_FACTOR'.
int_factor-modecode = zmpets_mode-modecode.
int_factor-rangeid = zmpets_range-rangeid.
int_factor-factor = zmpets_servfacto-factor.
int_factor-chk = line.
*here if the data is there, it will modify
MODIFY int_factor INDEX tab_control-current_line.
IF sy-subrc NE 0. "data not exixting in table control . ie new data, then append it
APPEND int_factor.
CLEAR int_factor.
ENDIF.
ENDMODULE. " move_data_from_table INPUT
*delete a line from table control
MODULE user_command_9010 INPUT.
CASE sy-ucomm.
When an entry is deleted, and the entry is removed from the table
control.
WHEN 'DELETE'.
PERFORM f_del_frm_tab_cntrl.
ENDCASE.
ENDMODULE.
FORM f_del_frm_tab_cntrl .
LOOP AT int_factor WHERE chk = 'X'.
DELETE int_factor WHERE chk = 'X' .
CONTINUE.
ENDLOOP.
CLEAR int_factor.
ENDFORM.
for any clarifiaction pls mail me.
pls reward points, if this helped u.
regards,
anversha.
[email protected]
Message was edited by: Anversha s -
How to select perticular row in table control for BDC
Hi all
I want to select perticular row in table control for deletion through BDC. My transaction is CA02, My input is material no and plant , then it display table control with work center. Now i want to select W999 cost center and delete through BDC.
Please Suggest me. it urgent.
Thanks& Regards,
RPHi all
I want to select perticular row in table control for deletion through BDC. My transaction is CA02, My input is material no and plant , then it display table control with work center. Now i want to select W999 cost center and delete through BDC.
Please Suggest me. it urgent.
Thanks& Regards,
RP
Maybe you are looking for
-
Looks like I don't have iPhoto anymore.... I just upgraded to Mac OS X Mountain Lion a few months ago. Last week I erased the HD and lost Iphoto when I reloaded Mac OS X. Any way to get back the old version of IPhoto ? I have lots of pictures that ar
-
I have a customer who still wants to run R/3 4.6B in V5R4 now and upgrade 4.6B to 4.7 next year. I could not find information that this is possible or supported. I figure that if R/3 4.6B can run over 4.6D Kernel, then it should be OK running in V5R
-
How can I stop adverts with sound coming up?
When I go to certain web sites a video with sound comes up which is very awkward for my wife in the middle of the night. Can I suppress adverts like this?
-
I tried to download LogSession.dll but now I don't know where it goes. Please help!
-
Opening PS CS5 does not automatically launch Bridge?
In PS CS3 there was a preference setting to automatically open Bridge when Photoshop was launched. This setting seems to be absent in CS5. Is there any way to get both apps to launch simultaneously?