Function or BAPI for material's Beginning Inventory,Receipts,ending inven

HI all,
Is there is a function or BAPI for material's Beginning Inventory,Receipts,ending inventory?
Just like t-code 'ckm3',we can see the material's Beginning Inventory,Receipts,ending inventory ,include quantities and price,and we can see the corresponding details documents.
But I want to see this for many materials at the same time ,not for one material. Especially for the material's Receipts(for adding inventory quantity, I do not attention the price value) during the current period.and the total of Receipt is ok , not for details documents in this period.
So ,is there a function or BAPI for it ? I want to use it to develop customizing inventory report.
Best regards,
Kaien

Hello,
  have you alredy tried if transaction MB5B could fit your requirements? It gives information about stock at the beginning and at the end of the selected period.
Hope to be useful.
Best regards,
Andrea

Similar Messages

  • Function Module/BAPI For Material Document

    Dear All,
    I am looking for a function Module/BAPI to get details relevant for a Material Document.
    I can get those details using table MSEG & MKPF, but still looking for a Function Module.
    Kindly help.

    Hi
    Try with these BAPI's
    BAPI_GOODSMVT_GETITEMS
    BAPI_GOODSMVT_GETDETAIL
    Regards
    Brahmaji

  • Function Module / BAPI for Creating Material freight Group

    Hi All,
    Can anyone tell me the Function Module / Bapi for creating material freight group.
    Regards,
    Raj.

    Bapi for creating material freight group. :: You actually use mm01 or mm02 to change data for material flight.
    So you can use BAPI for mm02 and mm01
    For Ex:
    BAPI_MATERIAL_SAVEDATA
    Hope this helps

  • Function module/BAPI for ATP Material

    Hi All,
    Is there any function module/BAPI for ATP(Available-to-Promise check) for Material.
    1) Production order from one plant
    2) Scheduling agreement from another plant.
    Regards,
    Srinivas.

    Hi,
    you can use either of one below for ATP.
    BAPI_MATERIAL_AVAILABILITY
    RV_AVAILABILITY_CHECK
    /SAPNEA/SMAPI_ATP_CHECK
    regards,
    ram

  • I need a bapi  for material management advance shipping notifications

    i need a bapi  for material management advance shipping notifications  for developing powls which includes below fields and some more fields.
    •     Inbound delivery number
    •     Due date (GR date)
    •     Vendor delivery number
    •     Material
    •     Name of material
    •     Quantity
    •     Vendor
    •     Name of vendor
    thanks and regards,
    jameer.p

    Hi Jameer,
    This is a hard one, my friend. I understand what you are trying to do.. Try BAPI_DELIVERYPROCESSING_EXEC. It is tricky though.
    Moreover you might want to use a FM to fill the IDOC data. something like IDOC_INPUT_**. this might be a better option.
    cheers,
    Hema.

  • Function module/BAPI for executing VD51/VD52 transactions

    Hi
    Warm greetings to all,
    I require a function module/BAPI for executing VD51/VD52 transactions. Can anyone help on this
    Sreekanth

    Hi Sreekanth,
    Use this.
    There is an FM which is used by standard transaction
    'RV_CUSTOMER_MATERIAL_UPDATE' .
    Ex Code -
    CALL FUNCTION 'RV_CUSTOMER_MATERIAL_UPDATE'
    IN UPDATE TASK
    TABLES
    XKNMT_TAB = XKNMT
    YKNMT_TAB = YKNMT
    TCATALOG_TAB = LT_CATALOG.
    commit work.
    Regards,
    Vijay

  • Function module / BAPI for FBRA IN 3.1 VERSION?

    Hello all,
    Could you please suggest Function module / BAPI for FBRA (Reverse and cancel) transaction in 3.1 version.
    Thanks,
    Subba

    Please check this FM perhaps it may help.
    CALL_FB08
    REVERSE_CLEARING
    RESET_CLEARED_ITEMS_BDC_WRITE.
    Regards
    Kiran Sure

  • Function Module/BAPI for posting of Parked Invoice/Documnet

    Dear all,
    Please provide me.
    Function Module/BAPI for posting of Parked Invoice/Documnet
    Regards
    Ricky

    Hi Ricky,
    What about MR_POST_PP_INVOICE?
    In my current project, though, we had to develop a function module for this.
    Regards,
    Eli

  • Function module/BAPI for Pgi creation

    hi all,
    any standard function module/ BAPI for create PGI.
    i know BAPI_OUTB_DELIVERY_CONFIRM_DEC, suppose if we are using PGI reverse not possibul.
    regards

    This is not answered

  • Exist RFC Function or Bapi for insert Records form a external program?

    i create a Ztable same as tell me here:
    http://abaplovers.blogspot.com/2008/02/creating-table-in-sap.html
    5 String Fileds 2 Date Fields 2 Numeric Fields
    my question is exist a RFC Function or Bapi for insert Records form a external program (Delphi/Visual Basic)?
    Any advices?
    Thanks.

    hi madhurao123 thanks for answer.
    But Why block the Thread?
    This question is no so basic, yet never learn, the forum must be open to these questions maybe open a forum somewhere basic but must be able to do these basic questions.
    IT Toolbox commented the same thing, but if not here or ITtoolbox or where else can ask basic questions?
    Advise me, thank you.

  • Populate key figure attributes values for material & location in inventory

    Hi all,
    We have a Inventory Infocube. the dimensions of the inventory infocube contains material, location and material-location and also the time dimension with calday, week and month. The different key figures in the infocube are Unrestricted Stock Balances, Unrestricted Stock Receipts, Unrestricted Stock Issues, QI Stock Balances, QI Stock Issues, QI Stock Reciepts, Blocked Stock Balances, Blocked Stock Receipts, Blocked Stock Issues. The following is the definition for master data objects
    Material Master - ATTRIBUTES :- Business Unit, Manufacturing Plant, Base to Case Conversion Factor(key figure attribute)
    Location Master - ATTRIBUTES:- City, State, Country, Location Type
    Material Location master - ATTRIBUTES:- Material, Location, MRP Controller, Source Location, Standard Cost(key figure attribute)
    We have a report with material, location, calender day and with all the stock balances keyfigures. also in the report we have the key figure attributes of material master and material location (like standard cost and base to case conversion). We have defined a formula variable on these attribute key figures with replacement path.
    The problem is none of the records are getting populated with the standard cost and base to case conversion.
    We are NOT doing any conversion at the report level.
    Any help is greatly appreciated.
    Regards
    Vijay

    There could be few possibility:
    1. The variable you are inputting for standard cost and base to case conversion may not have any values in the master data.
    2. See the master data table for Material and location. Note down those materails and location for which there are values for standard cost and base to case conversion. Now, run the reports for these materials
    and location.
    Btw, have made standard cost and base to case conversion as nav attributes. Plz make them nav attributes and see.
    Thanks...
    Shambhu

  • BAPI for Material master update

    Hello,
    I need to upload and change data to the classification screen of Material master (MM01/02). I am thinking of using BAPI_CHARACT_CREATE and BAPI_CHARACT_CHANGE. Can we use BAPI_MATERIAL_SAVEDATA to upload and change characteristic data for material master(MM01/02)?
    Can anybody provide me some sample code for mass upload and mass change of characteristic data to material master?
    Thanks in advance
    Rajesh.

    Hi Rajesh,
    You can use standard SAP program <b>RCCLBI03</b> to do mass upload.
    Please check the program documentation for more information.
    Also you can take a look this BAPI/FM.
    <b>BAPI_OBJCL_CREATE
    BAPI_OBJCL_CHANGE
    CLVF_INSERT_AUSP
    CLVF_UPDATE_AUSP
    CLVF_VB_INSERT_CLASSIFICATION</b>
    Hope this will help.
    Regards,
    Ferry Lianto
    Please reward points if helpful.

  • Function Module / BAPI for Inbound Delivery from Purchase Order

    Hi,
    I need to create an inbound delivery from Purchase Order items and am looking out for some Function Module or BAPI for the same.
    The requirement is that i should be able to specify selected line items from PO for delivery.
    I tried the BDC method for VL31N , but the particular item selection is problem, since by default it shows all the items of PO and i want only selected items.
    Do reply.
    Thanks in advance.

    check these and their documentations.
    BAPI_INB_DELIVERY_CHANGE       Change inbound delivery
    BAPI_INB_DELIVERY_CONFIRM_DEC  BAPI for inbound delivery verification from a decentralized system
    BAPI_INB_DELIVERY_SAVEREPLICA  BAPI Function Module for Replication of Inbound Deliveries
    Regards
    Prabhu

  • Function Module / BAPI for reprinting a production order

    Does anyone know a Function Module to do a production order re-print?   Not an original, just a copy.
    Thanks,
    --Amy Smith
    --Haworth

    Thanks Kevin,
    Been there.  Couldn't find anything.  Doing a BDC for testing. 
    Looks like you have to do a Production Order change.    So maybe is a BAPI for that.
    I'll post what we find in this thread...
    --Amy Smith
    --Haworth

  • Function Module/BAPI for Posting with Residual Clearing

    Hello All,
    I want to know whether any Function Module/BAPI avaialble for posting with residual clearing (FB05). Can we do residual clearing using the FM "Posting_Interface_Clearing"?
    Please let me know how this can be handled.
    Thanks in advance.
    With Regards,
    Senthil.

    Hi senthil ,
    Look at these threads
    POSTING_INTERFACE_CLEARING
    bapi for Transfer posting with clearing
    BAPI_ACC_GL_POSTING_POST for FB05
    Question about POSTING_INTERFACE_CLEARING and POSTING_INTERFACE_START
    Regards,
    Gaurav

Maybe you are looking for

  • Data from dynamic internal table to be downloaded to App server

    Dear Friends, I have a a dynamically generated internal table  and it contains huge data.And my requirement is to download the same data with a deliminator into a text file in application server. Can you pls help me with the code.... Thanks, jeevan.

  • XQuery works outside of Oracle JDeveloper but fails in JDev

    Hi, I created an XQuery script that transform an XML file. It works fine in XMLSpy and Stylus, but fails with error in Oracle JDev 10.1.3.1: XPST0008: It is a static error if an expression refers to an element name, attribute name, schema type name,

  • Adobe Professional generating aab01152 (and like named) files when trying to entered data in comment

    We are trying to make comments in a pdf that then digitally sign it and save it.  This has worked fine for months and now it is giving us problems.  When trying to save the pdf we'll received the "unspecified error" message or the program will simply

  • Why won't these flash hyperlinks work?

    Please check out this page: http://www.urbanministries.com/index_3.asp See the rotating flash. I have links in it that pop out after the image is completely on the screen "Read more" and "Watch the Trailer." I know Flash has read the links as links b

  • Security issues to consider with download links

    Hello, I'm following the "How to Upload and Download Files in an Application" section of the Advanced Tutorial for APEX. I would like to integrate the security portion mentioned at the end ,however, i'm not sure how to integrate it into the download_