Function that returns quantity of good reciept and invoiced

Hi All,
I'm trying to write a report that displays the actual quantity posted of each PO item at good receipt (MIGO) and the verified invoiced value of the PO (MIRO).
Are there any functions that import a table of POs numbers (as well as any values from table EKPO) and returns the above data in a table?
In our system table EKBE has debts, credits and many other values which makes it very difficult to do the calculations necessary to obtain the values I need.
I would appreciate any assistance with this.
Nicholas

use BAPI_PO_GETDETAIL.
you can search yourself for FMs in Se37

Similar Messages

Goods Reciept and Invoice Reciept

Hi
Explain in detail what is GR / IR........ when it come itto picture. where exactly we require this reciepts.

Hello Raghunath,
When you are automating the business process of procurement you will encounter the terms GR and IR. In a typical procurement cycle you start with Requirement determination->Source determination->Craetion of purchase order-> Vendor evaluation & selection->Purchase order processing-> Goods receipt->Invoice verification.
The procurement cycle ends at the stage of invoice verification from material management perspective. at the stage of Goods receipt and invoice verification there ar Financial entries made in to the system for the purpose of FI-MM integration.
GR/IR are the temporary or contar accounts which are devised in the system for passing such entries. Following financial entries are made.
At the stage of Goods receipt
Dr Stock or inventory account
Cr GR/IR clearing
At the stage of Invoice verifiocation
Dr GR/IR clearing account
Cr Vendor
Hope I had been able to help you. please assign points .
Rgds
manish

Date difference function that returns minutes between two dates and excludes weekends and holidays

Is there a way to get this to work as a function?
Currently returns error "Select statements included within a function cannot return data to a client"
CREATE FUNCTION [dbo].[WorkDays](@DateFrom datetime,@DateTo datetime)
RETURNS int
AS
BEGIN
--Working time
DECLARE @WTFrom TIME = '8:00AM';
DECLARE @WTTo TIME = '5:00PM';
DECLARE @minCount BIGINT
--Date ranges
IF (DATEDIFF(HOUR, @DateFrom, @DateTo) > 12)
BEGIN
WITH CTE AS
SELECT @DateFrom AS DateVal
UNION ALL
SELECT DATEADD(HOUR, 1, DateVal)
FROM CTE
WHERE DateVal < DATEADD(HOUR, -1,@DateTo)
SELECT DATEDIFF(minute, MIN(CTE.DateVal), MAX(CTE.DateVal))
FROM CTE
WHERE (CAST(CTE.DateVal AS time) > @WTFrom AND CAST(CTE.DateVal AS time) < @WTTo) AND DATEPART(dw, CTE.DateVal) NOT IN (1, 7) AND NOT EXISTS (SELECT * FROM Holiday AS H WHERE H.holiday = CTE.DateVal)
OPTION (MAXRECURSION 0);
END;
ELSE
BEGIN
WITH CTE AS
SELECT @DateFrom AS DateVal
UNION ALL
SELECT DATEADD(MINUTE, 1, DateVal)
FROM CTE
WHERE DateVal < DATEADD(MINUTE, -1,@DateTo)
SELECT DATEDIFF(minute, MIN(CTE.DateVal), MAX(CTE.DateVal))
FROM CTE
WHERE (CAST(CTE.DateVal AS time) > @WTFrom AND CAST(CTE.DateVal AS time) < @WTTo) AND DATEPART(dw, CTE.DateVal) NOT IN (1, 7) AND NOT EXISTS (SELECT * FROM Holiday AS H WHERE H.holiday = CTE.DateVal)
OPTION (MAXRECURSION 0);
END;
END
Thanks for your help.

Please post DDL, so that people do not have to guess what the keys, constraints, Declarative Referential Integrity, data types, etc. in your schema are. Learn how to follow ISO-11179 data element naming conventions and formatting rules (you do not). Temporal
data should use ISO-8601 formats (you do not!). Code should be in Standard SQL as much as possible and not local dialect.
This is minimal polite behavior on SQL forums.
We hate functions in SQL. This is a declarative language and you are using it like 1950's FORTRAN. We hate local variables (more FORTRAN!)
The name of a function has to be either a known, common name, like “sine”, “cosine” etc. Or it is “<verb>_<object>”; you think a noun is a verb! Do you really need BIGINT? Why did you invite garbage data with it? Why do you think that SQL
uses AM/PM? Have you never seen the TIME data type?
Think about “date_val” as a data element name. A date is a unit of temporal measurement on a calendar scale. This would be a “<something>_date” in a valid schema.
>> Is there a way to get this to work as a function? <<
Probably, but why do it wrong?
Build a calendar table with one column for the calendar data and other columns to show whatever your business needs in the way of temporal information. Do not try to calculate holidays in SQL -- Easter alone requires too much math.
The julian_business_nbr is how SQL people do this. Here is the skeleton.
CREATE TABLE Calendar
(cal_date DATE NOT NULL PRIMARY KEY,
julian_business_nbr INTEGER NOT NULL,
Here is how it works:
INSERT INTO Calendar
VALUES ('2007-04-05', 42),
('2007-04-06', 43), -- Good Friday
('2007-04-07', 43),
('2007-04-08', 43), -- Easter Sunday
('2007-04-09', 44),
('2007-04-10', 45); --Tuesday
To compute the business days from Thursday of this sample week to next Tuesday:
SELECT (C2.julian_business_nbr - C1.julian_business_nbr)
FROM Calendar AS C1, Calendar AS C2
WHERE C1.cal_date = '2007-04-05',
AND C2.cal_date = '2007-04-10';
See how simple it can be when you stop trying to write FORTRAN and think in sets?
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL

PO Document Type Without Good Reciept and Invoice Reciept

Hi All,
Can i configure my document type in such a way that it do not require Goods Receipt as well as Invoice Verification. I know i can do the same with Account assignment category. But what if i am not using any particular account assignment category and i want this functionality
Lekhram

Hi,
I am still struggling with the basic requirement.
You want a PO that will not be received and not be invoiced?
If it is not to be invoiced then the price will have to be zero as well????
What is the point of such a PO, why not just use a program to send a flat file with the basic data on it instead.
A PO is meant to be used to request a delivery or service from a supplier, this scenario does not really seem to fit with the use of a PO.
If you really must do it, then I would use a separate document type for the PO (just to keep these separate and to give you some extra options). Then (as recommended above) use a special account assignment category so that you can set the GR and IR off and protect the field from being changed (by leaving them blank and flagging the "binding" flags on each).
Good luck
Steve B

Standard Objects for Goods Receipt and Invoice

Hi experts,
Is there any Standard Object for Creating Goods Reciept and Invoice in SAP other than standard BAPIs

Try to use the PROCESSKEY standard infoobject (BWVORG in R3/ECC) to discriminate the good receipt from the invoice one...
An other option is create a custom generic data source with a view on EKBE table and use the EKBE-VGABE field to discrimate them.
Regards.

Fields For Good Reciept and Issed !

Hi all,
I want the fields for the goods reciept and good issued for getting the stock for a particular material as on to date (which is my selection screen) ...
I have selected the sales data from the VBRK and VBRP tables which is for sales information and now i need to find out the Stock information. My Requirement is to maintain sales stock and to show the Turn Over Ratio ???
Can you tell me the tables and the fields where i will get them ...
I m calculating my Stock as:
Stock (as on date) = Substracted Value (Reciepts - issues ) - current stock.

In MSEG there is field for Sales order number as well as item number from that you can get the Goods issues quantity,similarly in MSEG you also have purchase order number and purchase order item numner from which you can get the goods purchased quantity by passing it to VBAP and EKPO respectively.
Regards
Mohamed Mansoor
Message was edited by:
Mohamed Mansoor Kasim

SOLVED: How can I use or call a function that returns %ROWTYPE?

Hi
edit: you can probably skip all this guff and go straight to the bottom...In the end this is probably just a question of how to use a function that returns a %rowtype. Thanks.
Currently reading Feuerstein's tome, 5th ed. I've downloaded and run the file genaa.sp, which is a code generator. Specifically, you feed it a table name and it generates code (package header and package body) that will create a cache of the specified table's contents.
So, I ran:
HR@XE> @"C:\Documents and Settings\Jason\My Documents\Work\SQL\OPP5.WEB.CODE\OPP5.WEB.CODE\genaa.sp"
749 /
Procedure created.
HR@XE> exec genaa('EMPLOYEES');which generated a nice bunch of code, viz:
create or replace package EMPLOYEES_cache is
    function onerow ( EMPLOYEE_ID_in IN HR.EMPLOYEES.EMPLOYEE_ID%TYPE) return HR.EMPLOYEES%ROWTYPE;
    function onerow_by_EMP_EMAIL_UK (EMAIL_in IN HR.EMPLOYEES.EMAIL%TYPE) return HR.EMPLOYEES%ROWTYPE;
    procedure test;
end EMPLOYEES_cache;
create or replace package body EMPLOYEES_cache is
    TYPE EMPLOYEES_aat IS TABLE OF HR.EMPLOYEES%ROWTYPE INDEX BY PLS_INTEGER;
    EMP_EMP_ID_PK_aa EMPLOYEES_aat;
    TYPE EMP_EMAIL_UK_aat IS TABLE OF HR.EMPLOYEES.EMPLOYEE_ID%TYPE INDEX BY HR.EMPLOYEES.EMAIL%TYPE;
    EMP_EMAIL_UK_aa EMP_EMAIL_UK_aat;
    function onerow ( EMPLOYEE_ID_in IN HR.EMPLOYEES.EMPLOYEE_ID%TYPE)
        return HR.EMPLOYEES%ROWTYPE is
        begin
            return EMP_EMP_ID_PK_aa (EMPLOYEE_ID_in);
        end;
    function onerow_by_EMP_EMAIL_UK (EMAIL_in IN HR.EMPLOYEES.EMAIL%TYPE)
        return HR.EMPLOYEES%ROWTYPE is
        begin
            return EMP_EMP_ID_PK_aa (EMP_EMAIL_UK_aa (EMAIL_in));
        end;
    procedure load_arrays is
        begin
            FOR rec IN (SELECT * FROM HR.EMPLOYEES)
            LOOP
                EMP_EMP_ID_PK_aa(rec.EMPLOYEE_ID) := rec;
                EMP_EMAIL_UK_aa(rec.EMAIL) := rec.EMPLOYEE_ID;
            end loop;
        END load_arrays;
    procedure test is
        pky_rec HR.EMPLOYEES%ROWTYPE;
        EMP_EMAIL_UK_aa_rec HR.EMPLOYEES%ROWTYPE;
        begin
            for rec in (select * from HR.EMPLOYEES) loop
                pky_rec := onerow (rec.EMPLOYEE_ID);
                EMP_EMAIL_UK_aa_rec := onerow_by_EMP_EMAIL_UK (rec.EMAIL);
                if rec.EMPLOYEE_ID = EMP_EMAIL_UK_aa_rec.EMPLOYEE_ID then
                    dbms_output.put_line ('EMP_EMAIL_UK lookup OK');
                else
                    dbms_output.put_line ('EMP_EMAIL_UK lookup NOT OK');
                end if;
            end loop;
        end test;
    BEGIN
        load_arrays;
    end EMPLOYEES_cache;
/which I have run successfully:
HR@XE> @"C:\Documents and Settings\Jason\My Documents\Work\SQL\EMPLOYEES_CACHE.sql"
Package created.
Package body created.I am now trying to use the functionality within the package.
I have figured out that the section
    BEGIN
        load_arrays;
    end EMPLOYEES_cache;
/is the initialization section, and my understanding is that this is supposed to run when any of the package variables or functions are referenced. Is that correct?
With that in mind, I'm trying to call the onerow() function, but it's not working:
HR@XE> select onerow(100) from dual;
select onerow(100) from dual
ERROR at line 1:
ORA-00904: "ONEROW": invalid identifier
HR@XE> select employees_cache.onerow(100) from dual;
select employees_cache.onerow(100) from dual
ERROR at line 1:
ORA-06553: PLS-801: internal error [55018]
HR@XE> select table(employees_cache.onerow(100)) from dual;
select table(employees_cache.onerow(100)) from dual
ERROR at line 1:
ORA-00936: missing expressionHe provides the code genaa.sp, and a very brief description of what it does, but doesn't tell us how to run the generated code!
Now, I have just done some googling, and it seems that what I am trying to do isn't possible. Apparently %ROWTYPE is PL/SQL, and not understood by SQL, so you can't call onerow() from sql. Correct?
So I try wrapping the call in an exec:
HR@XE> exec select employees_cache.onerow(100) from dual;
BEGIN select employees_cache.onerow(100) from dual; END;
ERROR at line 1:
ORA-06550: line 1, column 30:
PLS-00382: expression is of wrong type
ORA-06550: line 1, column 7:
PLS-00428: an INTO clause is expected in this SELECT statement
HR@XE> exec select table(employees_cache.onerow(100)) from dual;
BEGIN select table(employees_cache.onerow(100)) from dual; END;
ERROR at line 1:
ORA-06550: line 1, column 14:
PL/SQL: ORA-00936: missing expression
ORA-06550: line 1, column 7:
PL/SQL: SQL Statement ignored
HR@XE> exec employees_cache.onerow(100)
BEGIN employees_cache.onerow(100); END;
ERROR at line 1:
ORA-06550: line 1, column 7:
PLS-00221: 'ONEROW' is not a procedure or is undefined
ORA-06550: line 1, column 7:
PL/SQL: Statement ignoredNo joy.
Of course, now that I'm looking at it again, it seems that the way to go is indicated by the first error:
PLS-00428: an INTO clause is expected in this SELECT statement
So am I supposed to create a type of EMPLOYEES%ROWTYPE in a PL/SQL procedure, and the idea of this code, is that the first call to onerow() runs the initialiation code, which populates the cache, and all subsequent calls to onerow() (whether by my session or any other) will use the cache?
I've had a stab at this, but still, no joy:
create or replace procedure testcache is
    emp employees%rowtype;
    begin
        select employees_cache.onerow(100) from dual into emp;
        dbms_output.put_line('Emp id: ' || emp.employee_id);
    end testcache;
show errors
HR@XE> @testcache.sql
Warning: Procedure created with compilation errors.
Errors for PROCEDURE TESTCACHE:
LINE/COL ERROR
4/9      PL/SQL: SQL Statement ignored
4/54     PL/SQL: ORA-00933: SQL command not properly ended
HR@XE>Have a feeling this should be really easy. Can anybody help?
Many thanks in advance.
Jason
Edited by: 942375 on 08-Feb-2013 11:45

>
Ha, figured it out
>
Hopefully you also figured out that the example is just that: a technical example of how to use certain Oracle functionality. Unfortunately it is also an example of what you should NOT do in an actual application.
That code isn't scaleable, uses expensive PGA memory, has no limit on the amount of memory that might be used and, contrary to your belief will result in EVERY SESSION HAVING ITS OWN CACHE of exactly the same data if the session even touches that package.
Mr. Feuerstein is an expert in SQL and PL/SQL and his books cover virtually all of the functionality available. He also does an excellent job of providing examples to illustrate how that functionality can be combined and used. But the bulk of those examples are intended solely to illustrate the 'technical' aspects of the technology. They do not necessarily reflect best practices and they often do not address performance or other issues that need to be considered when actually using those techniques in a particular application. The examples show WHAT can be done but not necessarily WHEN or even IF a given technique should be used.
It is up to the reader to learn the advantages and disadvantages of each technicalogical piece and determine when and how to use them.
>
Now, I have just done some googling, and it seems that what I am trying to do isn't possible. Apparently %ROWTYPE is PL/SQL, and not understood by SQL, so you can't call onerow() from sql. Correct?
>
That is correct. To be used by SQL you would need to create SQL types using the CREATE TYPE syntax. Currently that syntax does not support anything similar to %ROWTYPE.
>
So am I supposed to create a type of EMPLOYEES%ROWTYPE in a PL/SQL procedure, and the idea of this code, is that the first call to onerow() runs the initialiation code, which populates the cache, and all subsequent calls to onerow() (whether by my session or any other) will use the cache?
>
NO! That is a common misconception. Each session has its own set of package variables. Any session that touches that package will cause the entire EMPLOYEES table to be queried and stored in a new associative array specifically for that session.
That duplicates the cache for each session using the package. So while there might be some marginal benefit for a single session to cache data like that the benefit usually disappears if multiple sessions are involved.
The main use case that I am aware of where such caching has benefit is during ETL processing of staged data when the processing of each record is too complex to be done in SQL and the records need to be BULK loaded and the data manipulated in a loop. Then using an associative array as a lookup table to quickly get a small amount of data can be effective. And if the ETL procedure is being processed in parallel (meaning different sessions) then for a small lookup array the additional memory use is tolerable.
Mitigating against that is the fact that:
1. Such frequently used data that you might store in the array is likely to be cached by Oracle in the buffer cache anyway
2. Newer versions of Oracle now have more than one cache
3. The SQL query needed to get the data from the table will use a bind variable that eliminates repeated hard parsing.
4. The cursor and the buffer caches ARE SHARED by multiple sessions globally.
So the short story is that there would rarely be a use case where ARRAYs like that would be preferred over accessing the data from the table.

Function that returns currently selected cell address or column

Is there a function that returns the address (or just the column) of the currently selected cell? Simply put, something like =selectedcolumn.
Background: I want to display help text in a cell, and I want that help text to change according to which cell (actually, which column) the user has selected. I have put the help texts in a hidden row. They take up too much space to be displayed all the time. I want one cell to contain the help text of the column of the currently selected cell.
Trying to not use Filemaker for this project if possible
Thanks for any help /Matt

The Numbers method, using comments as Barry showed, is probably the best method. An alternate method which is more complex would be to use an Applescript running in the background. The Applescript can scan in the background for which cell/column is currently selected and write that cell/column address into a cell in your table. A formula in your table (most likely a lookup formula) can use that address to serve up the correct help text in a diffrerent cell in the table or in another table.
Some problems with this methodare
The script is not part of the document. It is a separate entity.
The script must be started manually. It will not automatically start when the Numbers document is opened.
If the Numbers document is to be used on other Macs, each would also need the script installed.

Function that returns N values, without using a string

Hi, how can i make a function that returns several valures (that hasn't a exact number of returned values, it could return 3 values, or 7) without using a string?
When i need to return several values from a function, i put the values inside a varchar like thus 'XXX,YYY,ZZZ' and so on. Don't know if this has a poor performance.
If you can supply simple examples for what im asking, i would be nice.
(without using a string)

Can i create the type objects inside a package? If i
can, they will be local to the package, right?Yes, you're right.
Pipeline returns a row or several?You can use pipelined function in the same way you use table:
SELECT * FROM TABLE(pipelined_funct(agr1, agr2));
It returns results as separate rows.

Error with function that returns a rowtype...

i have a function that returns a rowtype. below is a simplified version:
create or replace function "GETC"
return mytable%rowtype
is
rec mytable%rowtype;
begin
rec.rowid := 1;
return rec;
end;
eventually i'll want to call this from java. but for now i'd settle for calling it from the XE web front end (and sqlplus).
SQLPLUS: i try to call it from sqlplus by first declaring a variable where i can store the return:
var a mytable%rowtype;
it instantly stops me saying that i can only declare a var of a particular type. so what do i do?
XE interface: i tried various ways to call getc(), but they were all unsuccessful. what should i be doing?
thanks so much for your time.
marko

Given a function like this:
CREATE OR REPLACE FUNCTION get_employee
     ( p_empno emp.empno%TYPE )
     RETURN emp%ROWTYPE
AS
     v_result emp%ROWTYPE;
BEGIN
     SELECT * INTO v_result
     FROM   emp
     WHERE empno = p_empno;
     RETURN v_result;
END get_employee;You can call it within PL/SQL like this:
DECLARE
     rec emp%ROWTYPE;
BEGIN
     rec := get_employee(7902);
     DBMS_OUTPUT.PUT_LINE(rec.ename);
END;However,
1. Unless there is a column named "ROWID" in the table (unlikely since it would conflict with the actual rowid and is therefore not allowed), the type will not have an attribute named "rowid".
2. "1" would not be a valid rowid anyway.
3. %ROWTYPE defines a PL/SQL type, which will not be recognised in other environments such as SQL and Java.

I get an error when i try to execute a function that returns a date value

Hi,
I'm new in ODP.NET, i'm make a package that contains a function that returns a date i.e.
Package Body General_pkg is
Function Get_Day Return Date is
vd_day date;
Begin
select sysdate into vd_day from dual;
return vd_day;
end Get_Day;
End General_pkg;
i use the next code to execute the function:
OracleCommand cmdData = new OracleCommand("General_pkg.Get_Day", cnx);
cmdData.CommandType = Commandtype.StoredProcedure;
OracleParameter PRM;
PRM = new OracleParameter();
PRM.ParameterName = "VDATE";
PRM.OracleDbType = OracleDbType.Date;
PRM.Direction = ParameterDirection.ReturnValue;
cmdData.Parameters.Add(PRM);
try
cmdData.ExecuteNonQuery();
catch(OracleException e);
When i execute this code, i have and exception, which say "identifier GENERAL_PKG.Get_Day must be declare..."
Obviously the package is correctly created in ORACLE i tested first in sql plus and it works but in ODP.NET they don't recognize the package or the function i don't know... please help!!!

OOOOOPSS.... i forgot that i change the user in my conecction string that's why it didn't work...
i guess i had to much beer last night.;. :)
thanks.

Deploy resulset of PL\SQL function, that returns ANYTABLE%TYPE

How can deploy resulset of PL\SQL function, that returns ANYTABLE%TYPE in SQL?

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by angelrip:
Hello everyone,
I've come through the following problem:
1.- I created an PL/SQL stored procedure which returns a REF CURSOR element, definition looks like this:
PACKAGE PKG_LISTADOS AS
TYPE tuplas IS REF CURSOR;
/* Procedimientos exportados por el paquete */
PROCEDURE inicializarModuloListados;
FUNCTION recaudacionUltimoMes(medioPago DEF_MEDIO_PAGO.MEDIO_PAGO%TYPE)
RETURN tuplas;
2.- Now I would like to call the stored procedure and retrieve the PL/SQL cursor as a ResultSet Java Object. The code I wrote is this:
Connection conn;
XmlDocument paramDef;
conn=poolMgr.getConnection str_poolDBConnection);
try
CallableStatement cstmt=conn.prepareCall("{?=call PKG_LISTADOS.recaudacionUltimoMes(?)}");
cstmt.registerOutParameter(1, java.sql.Types.OTHER);
cstmt.setString(2, "MONEDA");
cstmt.executeQuery();
ResultSet rs=(ResultSet)cstmt.getObject(1);
catch(SQLException sqlE)
3.- However, I can't make it OK, all the time I get the following error:
SQL Error(17004), java.sql.SQLException: Non valid column type
May anyone help me with this, thanks in advance:
Miguel-Angel<HR></BLOCKQUOTE>
Do something like the following:
cstmt = conn.prepareCall("{call customer_proc(?, ?)}");
//Set the first parameter
cstmt.setInt(1, 40);
//Register to get the Cursor parameter back from the procedure
cstmt.registerOutParameter(2, OracleTypes.CURSOR);
cstmt.execute();
ResultSet cursor = ((OracleCallableStatement)cstmt).getCursor(2);
while(cursor.next())
System.out.println("CUSTOMER NAME: " + cursor.getString(1));
System.out.println("CUSTOMER AGE: " + cursor.getInt(2));
cursor.close();
null

NCo 3 crashes when invoking functions that return a time field

I'm using NCo 3 (.NET 2 target framework) with Visual Studio 2010. When I invoke a function that returns time fields (like BAPI_ALM_ORDER_GET_DETAIL) NCo crashes with the following message:
SAP.Middleware.Connector.RfcTypeConversionException: Cannot convert 240000 into TIME (HHmmss)
I'm currently using NCo version 3.0.0.42. Is there a newer version? Obviously this is a bug inside the NCo library which I can't fix from the outside rendering the connector almost useless.
Is this a known problem? Does anyone know if it is already fixed in newer revisions of NCo?

I'm using NCo 3.02 (.NET 4 target framework) with Visual Studio 2010.
When I invoke a function that returns date fields (like BAPI_SALESORDER_GETLIST) NCo crashes with the following message:
SAP.Middleware.Connector.RfcTypeConversionException: Cannot convert DOCDATE....
Below is the code I'm using:
              Dim customer_orderAPI As IRfcFunction = ecc.Repository.CreateFunction("BAPISALESORDER_GETLIST")
                customer_orderAPI.SetValue("CUSTOMER_NUMBER", "0000020000")
                customer_orderAPI.SetValue("SALES_ORGANIZATION", "ARCO")
                customer_orderAPI.SetParameterActive("MATERIAL", False)
                customer_orderAPI.SetParameterActive("DOCUMENT_DATE", False)
                customer_orderAPI.SetParameterActive("DOCUMENT_DATE_TO", False)
                customer_orderAPI.SetParameterActive("PURCHASE_ORDER", False)
                customer_orderAPI.SetParameterActive("TRANSACTION_GROUP", False)
                customer_orderAPI.SetParameterActive("PURCHASE_ORDER_NUMBER", False)
                customer_orderAPI.SetParameterActive("MATERIAL_EVG", False)
                customer_orderAPI.Invoke(_ecc)   'I receive the error in this line
                Dim table As IRfcTable = customer_orderAPI.GetTable("SALES_ORDERS")
                Dim returnCode As String = customer_orderAPI.GetStructure("RETURN").GetString("TYPE")
                If (returnCode.Equals("E") Or returnCode.Equals("A")) Then
                    Console.WriteLine(customer_orderAPI.GetStructure("RETURN").GetString("MESSAGE"))
                Else
                    Console.WriteLine("*********** SUCCESS **********")
                    Console.WriteLine("Number of orders is .", table.RowCount)
                End If
Does anyone know what is the issue and how to fix it?

NCo 3.02 crashes when invoking functions that return a date field

I'm using NCo 3.02 (.NET 4 target framework) with Visual Studio 2010.
When I invoke a function that returns date fields (like BAPI_SALESORDER_GETLIST) NCo crashes with the following message:
SAP.Middleware.Connector.RfcTypeConversionException: Cannot convert DOCDATE....
Below is the code I'm using:
Dim customer_orderAPI As IRfcFunction = ecc.Repository.CreateFunction("BAPISALESORDER_GETLIST")
customer_orderAPI.SetValue("CUSTOMER_NUMBER", "0000020000")
customer_orderAPI.SetValue("SALES_ORGANIZATION", "ARCO")
customer_orderAPI.SetParameterActive("MATERIAL", False)
customer_orderAPI.SetParameterActive("DOCUMENT_DATE", False)
customer_orderAPI.SetParameterActive("DOCUMENT_DATE_TO", False)
customer_orderAPI.SetParameterActive("PURCHASE_ORDER", False)
customer_orderAPI.SetParameterActive("TRANSACTION_GROUP", False)
customer_orderAPI.SetParameterActive("PURCHASE_ORDER_NUMBER", False)
customer_orderAPI.SetParameterActive("MATERIAL_EVG", False)
customer_orderAPI.Invoke(_ecc) ' >>>> I receive the error in this line
Dim table As IRfcTable = customer_orderAPI.GetTable("SALES_ORDERS")
Dim returnCode As String = customer_orderAPI.GetStructure("RETURN").GetString("TYPE")
If (returnCode.Equals("E") Or returnCode.Equals("A")) Then
Console.WriteLine(customer_orderAPI.GetStructure("RETURN").GetString("MESSAGE"))
Else
Console.WriteLine("*********** SUCCESS **********")
Console.WriteLine("Number of orders is .", table.RowCount)
End If
Does anyone know what is the issue and how to fix it?

I'm using NCo 3.02 (.NET 4 target framework) with Visual Studio 2010.
When I invoke a function that returns date fields (like BAPI_SALESORDER_GETLIST) NCo crashes with the following message:
SAP.Middleware.Connector.RfcTypeConversionException: Cannot convert DOCDATE....
Below is the code I'm using:
Dim customer_orderAPI As IRfcFunction = ecc.Repository.CreateFunction("BAPISALESORDER_GETLIST")
customer_orderAPI.SetValue("CUSTOMER_NUMBER", "0000020000")
customer_orderAPI.SetValue("SALES_ORGANIZATION", "ARCO")
customer_orderAPI.SetParameterActive("MATERIAL", False)
customer_orderAPI.SetParameterActive("DOCUMENT_DATE", False)
customer_orderAPI.SetParameterActive("DOCUMENT_DATE_TO", False)
customer_orderAPI.SetParameterActive("PURCHASE_ORDER", False)
customer_orderAPI.SetParameterActive("TRANSACTION_GROUP", False)
customer_orderAPI.SetParameterActive("PURCHASE_ORDER_NUMBER", False)
customer_orderAPI.SetParameterActive("MATERIAL_EVG", False)
customer_orderAPI.Invoke(_ecc) ' >>>> I receive the error in this line
Dim table As IRfcTable = customer_orderAPI.GetTable("SALES_ORDERS")
Dim returnCode As String = customer_orderAPI.GetStructure("RETURN").GetString("TYPE")
If (returnCode.Equals("E") Or returnCode.Equals("A")) Then
Console.WriteLine(customer_orderAPI.GetStructure("RETURN").GetString("MESSAGE"))
Else
Console.WriteLine("*********** SUCCESS **********")
Console.WriteLine("Number of orders is .", table.RowCount)
End If
Does anyone know what is the issue and how to fix it?

Is there any function that returns the latest DDL statement

can anyone tell me if there is any FUNCTION that returns latest DDL statement performed in a schema.
OR
if there is any TABLE that will be populated with latest
DDL statement in schema.
THANK YOU.

The table all_objects (and/or dba_objects) contains a column called last_ddl_time. Thus, a query like
scott@jcave > SELECT max(last_ddl_time)
2 FROM all_objects
3 WHERE owner = 'SCOTT';
MAX(LAST_DDL_TI
28-NOV-03will tell you the last time any object owned by SCOTT had DDL issued against it.
Justin
Distributed Database Consulting, Inc.
www.ddbcinc.com/askDDBC

Function that returns quantity of good reciept and invoiced

Similar Messages

Maybe you are looking for