Function to get the Agents for the Workitem not the possible agents

Hi Guys ,
To get the user for each scienario we saved it in the ztable. Now i want to show in report the list possible agents assigned to workitem. ts should agents asigned to it ... its can be four or five ....

Try to make use of the FM SAP_WAPI_GET_WI_AGENTS, if at all you want to know the agents with respect to a workitem
and
check the below too
SWL_WI_DISP_ACTUAL_AGENTS
SWL_WI_DISP_EXCLUDED_AGENTS
SWL_WI_DISP_POSSIBLE_AGENTS

Similar Messages

Safari shows the IP for many site, not the normal URL

When I type a site like cnn.com into the safari browser, 3 out 4 times it will resolve and display the IP address in the URL bar, not the normal english text. This happens on most large sites like espn.com and it breaks functionality the of the site. I got so frustrated with it that I reinstalled the OS and for a while the problem was gone. Then it came back, same as before. The only thing that changed when it came back is that I installed flash. Any ideas?
Macbook pro 11,1
OSX 10.9.4
Current on updates

Try another browser.
Firefox
Do a backup, using either Time Machine or a cloning program, to ensure files/data can be recovered. Two backups are better than one.
Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
If the problem is still there, try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About

I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen. How can I make the sound alert work?

I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen. How can I make the sound alert work?

I have had this same problem for weeks now with my 4S. I just got a new 5S after being extremely frustrated and the same thing - no sounds. After searching posts all over, I couldn't find a solution. I just told my friend of the issue and he asked "Do you have the Do Not Distrub on?" I didn't even know such a function existed. Upon looking that was exactly the issue.
To resolve, go to Settings> Do Not Disturb> Manual. If it is green, turn it off. You will now get phone calls and text alerts.
This functionality is also on your quick access utility menu (slide up menu). I assume this is how it was enabled on my phone.
I will post on other sites since I searched for weeks for this solution and didn't see it anywhere. Good luck!

I recently purchased an Apple TV box & the App for Apple TV from the Apple store. Now how do I get it to work? I am a card-carrying technological imbecile.

I recently purchased an Apple TV box & the App for Apple TV from the Apple store. Now how do I get it to work? I am a card-carrying technological imbecile.

If I'm understanding correctly, you have an Apple TV 2 (the small, black box version of the Apple TV), and downloaded the Remote App from the iTunes Store for your iPod Touch/iPhone/iPad, correct? If so...
For the AppleTV setup, hook it up to your television and, if applicable, your Surround Sound system. To do this, you'll use an HDMI cable (not included, available here) to hook the AppleTV to your Television. The cable only fits one way, and should slide effortlessly into place. If, and only if, you intend to use your surround sound system with the AppleTV, you will also need what's called a TOSLINK Optical Cable (also not included, available here). This cable goes from the AppleTV to a port labelled Optical In or Digital In on the back of your surround receiver (consult the manual that came with your surround sound system for additonal help).
From here on, we'll focus on hooking up the AppleTV, then how to setup the Remote App from Apple on your iOS device.
The AppleTV needs a network connection in order to function correctly. A wired connection is recommended, but Wi-Fi is built-in to the AppleTV if a wired connection isn't available. With the AppleTV plugged into your television, follow the on-screen instructions for setup. To connect the AppleTV to your Wi-Fi network, you'll need to know the name of the network you want to connect to, as well as any password needed to connect to it. When the AppleTV has a network connection, it'll load the latest selection of TV Shows, Movies and Music for display on the main menu - that's the easiest way to tell everything's working.
For the Remote App, all you need to do is download the free application to a compatible iOS device (Any iOS device running iOS 3.1.2 or higher). Once downloaded, go to the computer hosting your iTunes library, and turn on Home Sharing. Finally, start the Remote App on your iOS device (be it iPhone, iPad, or iPod Touch), login with the same information you setup Home Sharing with, and away you go! The Remote App is entirely optional, since the AppleTV can be controlled by the included remote control, but it's a nice touch nonetheless.
I hope this answered your question, or at least helped put you on the path to success. If you need something clarified, please don't hesitate to ask here.

I am batch processing in PS 2014 (watermark and saving as jpeg from ps file). I get the message for some but not all 'this file needs to be saved as a copy with this option'. And then I have to save it manually. Does anyone know why this happens? (It is j

I am batch processing in PS 2014 (watermark and saving as jpeg from ps file). I get the message for some but not all 'this file needs to be saved as a copy with this option'. And then I have to save it manually. Does anyone know why this happens? (It is just a plain photoshop file, a watermark is added, then save as jpeg - the jpeg is saved to a different folder than the original photoshop file.) It happens for about 10 of 30/40 files approximately . Thank you, Kathryn

I believe I have figured it out - I need to flatten the image, even though there are no layers except for layer 0, first.

I purchased PSE 13 but have a Vista OS. It was suggested in this chat room that I download PSE 12. I did that & installed. The serial # for 13 does not work. Any thoughts on how I can get a number for PSE 12?

I purchased PSE 13 but have a Vista OS. It was suggested in this chat room that I download PSE 12. I did that & installed 12.
The serial # for 13 does not work. Any thoughts on how I can get a serial number for PSE 12?

Hi
There is a newer version of Resolution+ Plug-in released for an Qosmio X series
[Resolution+ Plug-in v 1.1.2004|http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory =2&selFamily=381&selSeries=231&selProduct=7506&sel ShortMod=null&language=13&selOS=all&selType=400&ye arupload=&monthupload=&dayupload=&useDate=null&mod e=allMachines&search=&action=search&macId=&country =all&selectedLanguage=13&type=400&page=1&ID=82406& OSID=30&driverLanguage=42]
try it out...
If it has not been installed properly, try rebooting your computer and reverify.

When I try to activate my prepaid CC card I get: "This card was purchased in a country that does not match your Adobe ID." I bought it in the USA for use here in the UK...how can I activate it? It is a student edition. Thanks

When I try to activate my prepaid CC card I get: "This card was purchased in a country that does not match your Adobe ID." I bought it in the USA for use here in the UK...how can I activate it? It is a student edition. Thanks

I don't know that you can purchase in one country and use it in another. Try contactoing Adobe support thru chat:
Creative Cloud support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html ( http://adobe.ly/19llvMN )

Living in Dubai where many apps are blocked. How can I get around ? Tried to create a new Id but my billing address in Dubai will not match the criteria for an account in the US. Help please to get around the censorship...thnaks

Living in Dubai where many apps are blocked. How can I get around ? Tried to create a new Id but my billing address in Dubai will not match the criteria for an account in the US. Help please to get around the censorship...thanks

The censorship in regards to certain apps not being available in your country is by your country, not by Apple.
Due to various laws and licensing in each country, in order to have an iTunes store account in a particular country you must have a credit card with a billing address in that country. If this were up to Apple, there would be no such requirement and there would be only one iTunes store for the entire world, but various laws, regulations, and licensing issues in each country, this is required by Apple.

I cannot turn on the wifi for my 4g. The button is visible but non functional. suggestions?

I cannot turn on the wifi for my 4G. The button is visible but non functional. Suggestions?

Hello! Does the wifi button look greyed out? Here is a link regarding this issue: http://support.apple.com/kb/ts1559
What you will need to do is to first to reset network settings by going to Settings>General>Reset>Reset Network Settings, NOTE: When you do this all bluetooth/wifi passwords will be forgotten. If the issue persists then we need to do a simple backup and restore.
Follow http://support.apple.com/kb/ht1766 and http://support.apple.com/kb/ht1414 on how to backup and restore, when you restore please restore as new, do not restore the backup just yet if the Wifi is greyed out then there is a hardware issue and the device needs to be serviced. Please check your local Apple Store or call into Apple regarding service options and warranty status. Hope this helps!

How do you get to the options for export settings with the new quicktime?

I'm having trouble with the new quicktime pro. I'm trying to export a video with specific settings when exporting. It seems that in this version of quicktime you export and the only options i get is how to format : for ipad/pod/phone or 480p which is not what I want I need to change the settings to make my video 480x360 and fast start for web. can someone help

How do you get to the options for export settings with the new quicktime?
You don't Use QT 7 "Pro", GarageBand, a video editor app, or a third-party app like MPEG Streamclip all of which can access user conversion settings.

How to get internet on the go for iPad 2, is it possible? Thanks for ur help in advance...

How to get internet on the go for iPad 2, is it possible? Thanks for ur help in advance...

If you don't have cellular on your iPad, then you will need a public Wi-Fi access.

Is there a way to get push notifications for social apps on the Droid Maxx

Is there a way to get push notifications for social apps on the Droid Maxx? With text messaging, you will see a badge icon, but I wasn't sure if you could do that for social networks, too.

@cmabbott85,
I can definitely understand how important it can be to get your Facebook or Twitter notifications on your phone.
As @rcshnoor mentioned, each app does have the option to turn the notification on or off. You need to launch the App and go into the Menu. Then go to App Settings and make sure notifications are checked.
JohnB_VZW
Follow us on Twitter @VZWSupport

How do I get serial numbers for computers bought in the last seven years? They have been stolen but I am not in the country. Can I do it remotely?

how do I get serial numbers for computers bought in the last seven years? They have been stolen but I am not in the country. Can I do it remotely?

Check here first, and use your AppleID:
https://supportprofile.apple.com/

How to Find the Runtime for any workitem.

Hi,
Could you please tell how to find the runtime for any workitem.
Thanks,
Bhanu Gattu.

Hi,
I think, your query is pertaining to Workflow.
Please explain your requirement little more.
If you need Runtime Analysis: Then the transaction Code: SE30 must be used.
Thanks.
RamaniN
Edited by: Ramani Nagarajan on May 21, 2009 12:33 PM

How do I get the money for a giftcard if the code is unreadable?

how do I get the money for a giftcard if the code is unreadable?

http://support.apple.com/kb/TS1292

Error - The attributes for user could not be determined

When I login as a Buyer (with role ZTSX_EC_BBP_PURCHASER - copy of SAP_EC_BBP_PURCHASER), I get the foll. error while trying to Process Purchase Orders:
The attributes for user could not be determined
It does not happen on other transactions (like Sourcing or Issue POs).
The buyer is in the org. plan and I have checked the attributes and they seem ok.
What could be the issue ???
Thanks
-Bakulesh

Hi
<b>Please go through these links -></b>
The attributes for user could not be determined --
'Error in writing attributes' when using function tab
Company code for system missing in user attributes
BBP_POC not working in SRM 5.0
Re: urgent: regarding ATTRIBUTES
Regards
- Atul

Function to get the Agents for the Workitem not the possible agents

Similar Messages

Maybe you are looking for