Function u2013 transaction lost where synchronize PFCG and ERM
Hi Gurus,
Iu2019m working on Access Control Role Management 5.3 and when I synchronize ERM with PFCG I lost the Function u2013 transaction relationship in ERM role. Is It normal? Anybody know if I can recover it? Maybe forcing some table in the ERM DB?
Hi Luigi,
How you are calling PFCG?? ERM will only know about the changes if you call PFCG from ERM. Then the synchronization button will be visible and you can see all the functions.
Any changes that you directly make in PFCG (from the backend system) without going through ERM is invisible to ERM and those roles & information can't be synced.
If you are following the 2nd option, you may need to seriously look at disabling the PFCG role modification authorizations in the backend system.
Regards,
Raghu
Similar Messages
-
When you download iTunes material, does iTunes record the IP used where it is being downloaded to? I am trying to track a lost/missing IPOD Touch and want to know if they have that data. It was left on a small street and someone has found it and has been hacking into my account by resetting my password. They took about 41+ dollars from my account. I am hoping the IP it was connecting with to download to it was tracked and that I can get that information to figure out where it is located.
No. From the second link below.
"Apple does not have a process to track or flag lost or stolen product
- If you previously turned on the FIndMyiPod feature and location service is on, and wifi is on and connected go to iCloud, sign in, and go to FindMyiPhone. It the iPod has been restored it will never show up.
- Report to police and change the passwords for all accounts used on the iPod.
- Apple will not help
Reporting a lost or stolen Apple product -
the InitCVIRTE function is not listed in the NIDAQ function reference online help? Why? and what does she do?and where can I find a description of this function? Can i use this function with visualc++ 6.0?
The InitCVIRTE function is in the CVI run time engine (cvirte.dll)..not part of NI-DAQ.
Applications written or using CVI may call this function..
How are you running into this ?
From the CVI help...
This function performs initialization of the CVI Run-Time Engine. It is needed only in executables or DLLs that are linked using an external compiler. Otherwise, it is harmless.
It should be called in your main, WinMain, or DllMain, function. The parameter values you should pass depend on which of these three functions you are calling InitCVIRTE from. The following examples show how to use InitCVIRTE in each case.
If you are using main, your code should be as follows.
int main (int argc, char *argv[])
if (InitCVIRTE (0, argv, 0) == 0)
return -1; /* out of memory */
/* your other code */
return 0;
If you are using WinMain, your code should be as follows.
int __stdcall WinMain (HINSTANCE hInstance,
HINSTANCE hPrevInstance,
LPSTR lpszCmdLine,
int nCmdShow)
if (InitCVIRTE (hInstance, 0, 0) == 0)
return -1; /* out of memory */
/* your other code */
return 0;
If you are creating a DLL, you must call InitCVIRTE and CloseCVIRTE in your DllMain function, as in the following.
int __stdcall DllMain (void *hinstDLL, int fdwReason,
void *lpvReserved)
if (fdwReason == DLL_PROCESS_ATTACH)
if (InitCVIRTE (hinstDLL, 0, 0) == 0)
return 0; /* out of memory */
/* your other ATTACH code */
else if (fdwReason == DLL_PROCESS_DETACH)
/* your other DETACH code */
CloseCVIRTE ();
return 1;
NOTE: The prototype for InitCVIRTE is in cvirte.h, not
utility.h.
NOTE: In CVI 4.0.1, this function was expanded from one to
three parameters. Executables and DLLs that were
created using the one-parameter version of the function
will continue to work properly.
/*-------------------- Prototype ---------------------*/
int InitCVIRTE (void *HInstance, char *Argv[], void *Reserved);
Nandan Dharwadker
Staff Software Engineer
Measurement Studio Hardware Team -
I upgraded my iOS 3.3.5 to 5.0 on my iPhone 4 and lost all photos on camera roll. Where are they and can they be recovered?
Have you been using your phone as recommended? If so, you've been importing photos in your camera roll onto your computer for safe keeping. Just as you would with a standalone digital camera. Your photos would then reside safely on your computer for archival.
While camera roll photos ARE part of the backup, not everything always goes smoothly as you've seen, which is why the recommendation to import photos as soon as possible to your computer.
If you have a recent backup of your iPhone, you can restore and hopefully many of your photos will be on this backup. Any photos or data added to your phone since this last backup are, of course, gone forever.
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf -
Hello, i lost my iphone5 32gb and i want to track it but the thing is that in my iphone5 i did not setup the find my iphone application :'( ...so, is there any option where i can track my phone or block it that nobody can use it..please help me out
Unfortunately if you did not set up 'Find My iPhone', there is no way to remotely track or wipe the device.
-
I lost my iLife DVD and need to download iDVD for a school project! I didn't mean to uninstall it!!! Where can I get it!!! Some one smart about iDVD please save me! Thank you.
Hi
If You lost it - You need to get a new one. There are no free or legal downloads AT ALL.
• Second handed from e-bay
• See if Amazon - got any boxed iLife'11 DVDs left (cheque that iDVD is included)
Apple do NOT sell any more.
Yours Bengt W -
I lost all of my contact with yesterdays update. Where are they and why did this happen?
I lost all of my contact with yesterdays update. Where are they and why did this happen?
What update? There was nothing released yesterday relating to iCloud.
Where have you lost your contacts from? Your computer, your phone, iCloud.com?
If they are no longer in any of those places, you'll need to restore them from your most recent backup. -
HT1391 Where can i report my iPhone lost to Apple? and Can Apple lock it?
Where can i report my iPhone lost to Apple? and Can Apple lock it?
If you set up the Find My iPhone service prior to your iPhone going missing, then there is a chance that can be tracked and locked, though it depends on a number of factors: the iPhone is turned on, connected to either the 3G or a WiFi network, or has not had the Find My iPhone service disabled or the iPhone been completely restored. Log into icloud.com and go to the Find My iPhone section. If you did not set up Find My iPhone, check with your cell carrier. Some carriers offer their own tracking service, though you usually have to sign up when you still have the phone and have to pay for the service.
If your carrier does not offer such a service and you did not set up Find My iPhone, then there is no way to track the unit nor lock it, though if you set a screenlock passcode, it would be locked already. Notify the police and your cell carrier, and change any passwords for any online accounts you may have used from your iPhone (the iTunes Store, for instance).
Regards. -
My keyboard (wired) has lost functionality on the music PLAY/PAUSE, FORWARD and BACK, and VOLUME KEYS. They do NOTHING. All else is fine. How can I reassign them correctly? (Don't see those functions listed with System Settings/Keybard shortcuts).
Crayolla,
Try doing a SMC and PRAM resets. Sometimes it takes 2-3 attempts for them to work so be a little persistent if they fail the first time.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys. -
Before IOS 7, I created an account on my wife and childrens iPhones, iPads and iPod devices with my iCloud account, only having the Find My iPhone function turned on. It worked great. Now, with IOS 7, it is not working and I don't have the option to have the Find My iPhone function on my iCloud account on their devices. Does anyone know how to make this work? My family loses their devices frequently and I am concerned I won'e be able to help them find them. Thanks!!
They only need their main iCloud account to have Find My iPhone on. If your account is not their main account it won't work. Only one account can enable that function on a device. They don't need to have the app on their devices unless you want them to find you.
If you can see the devices when you log into their accounts on your Find My iPhone app they are being recognized by the app. But as Winston said if they're not turned on, if they are not on a network, cell or wifi, then they will read as offline. This often happens when I look for my wife's phone when she is at work, her wifi system there does not keep the connection active when the device goes to sleep and in some areas of the building there is poor to no cell connection. And sometimes the service just doesn't pick them up for no obvious reason.
iOS 7 has several annoying glitches right now that hopefully will be resolved soon and this could be one for you. I would try this again by having all the devices in one location , restart all of them, make certain the function is enabled on all of them and that wifi is connected ( if you have a wifi network available ) or that they are connected to a cell network with a strong signal. Then launch the app on your phone and log in with their accounts, their locations should show up. -
I lost my iPhone 5 and its searches for my daughters phone rather than mine? How do I fix this problem without having the phone in my pocession? I have an ipad but I don't own an apple computer
Without the phone in hand, there is nothing you can do. You have to set up find my iPhone (under your iCloud account settings) manually on the device itself. You cannot enable remote tracking after it is lost.
-
Solution for "Error while trying to synchronize Audio and MIDI" and "System Overload" messages
Article for those who hate Logic error windows
Seen in Logic Pro 9.1.7 on Mac OS X Lion 10.7.4
and Logic Pro 9.0.0 on Mac OS X Snow Leopard 10.6.5
Logic Pro:
System Overload.
The audio engine was not able to process all required data in time.
(-10011)
Error while trying to synchronize Audio and MIDI.
Sample Rate xxxxx recognized.
Check conflict between Logic Pro and external device.
The search in the help given as follows: overload occurs when you use a lot of tracks and a lot of effects on them, and the synchronization is lost when the selected MIDI track for recording or playback. Yes, this is all that is written in the resources. And here are useful tips that have been found:
The Bounce function allows the entire instrument track to be recorded as an audio file. This bounced audio file can then be used (as an audio region) on a standard audio track, allowing you to reassign the available processing power for further software instrument tracks. For more details, see "Bouncing Your Project."
You can also make use of the Freeze function to capture the output of a software instrument track, again saving processing power. For details, see "Freezing Tracks in the Arrange Area."
These tips - about the timing. About overload - there are no tips, except as "reducing the number of plug-ins" and "increasing latency". Zero useful tips - I got two errors in the test project with a blank audio track with no effects, MIDI drums and standard synthesizer, it was no aux buses, and the entire project was only a single plugin in the master track.
Here is the configuration of my computer:
iMac12, 2
CPU: Intel Core i5 3,1 GHz
Memory: 4 GB
And here's a project that almost immediately stops Logic, all instruments and plug-ins with the init-patch, ie not the most demanding settings:
It's sad.
When this happened the first time, I could start the project only if the empty audio track has been selected, a track specially designed so that you can at least start the project. Then, this problem has evaporated along with the changing conditions of work and I forgot about it until the last case.
I was looking for the cause of the problem in the console and the system monitor for two days, and finally I found that Logic ping to the network frequently. I remembered the exact time of occurrence of the problem, and system logs revealed that the problems began immediately, as soon as I deactivate the service of the Internet.
Solution: enable the Internet, or add a new network service on a computer with no Internet. I just created the Ethernet connection to the ip address 1.0.0.0
Logic immediately began to sing.Hi gabaghoul
Yes, it worked for me on four different OS and Logic versions (10.6 - 10.8 and 9.0 - 9.1.6)
It does not work in some cases, hard enough to tell in which one, but you can try, it very easy: go to the net settings and create new Ethernet connection to the ip address 1.0.0.0 and connect LAN cable to the port.
Also you can try to figure out what happens in your system while Logic error occured - fot that you just start Console and search "logicpro"
Pay attention to repetitive events in a console and events with suitable timing, not so far from error
The problem may be related to the GUI or system memory, sometimes turning off Safari (or Chrome, others browsers) might help.
Message was edited by: spred -
I lost all email 6months and older in mac mail. Need Serious Help!
I lost all email 6 months and older in mac mail. In my in-box as a well as all other folders I created. I expected that the mac email software would keep all email as it did for me in when I used to use Outlook. As well I thought I was covered with the Time Machine I have installed. Well.....The Time Machine that I was aggressively encouraged to buy apparently doesn't back up email. If it does, I must need some secret decoder ring to unlock where it is. I need serious help. I lost months of professional and personal data. I need to fix this immediately and find some way to get my email back. Please help.
In March when I upgraded to Lion and iCloud I also experienced a similar problem (cluster of problems) which was solved by a password reset (conforming to new requirements) for my Apple ID. I'm glad to see that many nice people contributed and your primary problem is fixed. My comment is on your Quicken problem.
Your data inside Quicken 2004 is on borrowed time. In the process of researching personal budgeting apps I found many reports on the web that indicate Intuit as a company is scaling down Quicken (desktop) development and its future attention to the Mac platform will be minimal.
Did you know that Intuit is behind Mint.com? You may be hesitant to put your financial data "in the cloud" and I may be being sheepish, but.. bbaaaa, bbaaaaa, the cloud is where it's going. I know first-hand want a pain in the arse it is to customize an app to your liking. I spent several hours on Mint.com setting up categories and tagging transactions. It's tedious. I didn't look because I wasn't a Quicken user, but perhaps Intuit was nice enough to provide a data conversion path for Mint.com. It is worth a look.
My second suggestion is to scour the web for a hack solution. You can't be the only person who is facing this problem. Quicken was very popular. I just bet someone has posted directions or some code for exporting the Quicken 2004 data and manipulating it for something else.
Good Luck.
Ellee H. -
On transaction FBL3N report change layout and save layout icons not activ
Hi,
I am working on upgrade project from 4.6C to ECC6.0. On transaction FBL3N report change layout and save layout icons not active; only select layout icon is active.
Please advise how these two icons can be activated.
saeedHi,
The object F_IT_ALV has a field, the activity ACTVT, which can
contain four permitted values: 01, 02, 03 and 70.
Activity 03 corresponds to the minimum authorization, which is the
most restricted one: You can only select layouts which have
been configured already. In particular, all of the other functions
named above are inactive with activity 03.
I guess that your user-id have set activity 03 for this object.
The SAP notes 374656 and 409190 are recommended.
So, if the values 01 and 02 are not included, then
the user can't change and save layouts.
For the line item display in FI the authorization
object FI_IT_ALV has been created as an extra security check in addi-
tion to the ALV authorization object S_ALV_LAYO.
Please check note 374656 where you should be able to find
relevant info about this. Also note 637554 should be helpful.
Regards,
Aidan -
Lost a cross dissolve and can't replace it
I used a 5 sec cross dissolve function to smooth out a place where I edited out unnecessary footage. Then I detached original audio and spliced a second audio track over part of the video. Now I've lost my cross dissolve and there is a 5 sec black out at that point in the footage. When I try to add back a cross-dissolve FCP X puts it at the beginning of the timeline and won't let me overlay it at the original spot, which is just before the new synced audio track starts.
You can leave the home page setting empty to make Firefox use the build-in about:home home page.
*https://support.mozilla.com/kb/How+to+set+the+home+page
Maybe you are looking for
-
My wife and I share the same email address but have different iphone numbers. Is there anyway we can both us "Find Friends" apps? When I try to enter her contact name it won't allow me to do this. Thanks.
-
Help needed in variable substitution
Hi guys, I'm doing a simple file to file scenario, where i'm moving a mp3 file from one folder to another. I referred one weblog to do this any file type to anyfile type scenario, which uses only configuration in ID and nothing to be done in IR. My d
-
downloads do not appear all (only the first two) in the download statusbar (could be a ff19 or downloadhelper or unmht problem) and none in the download window used ff19 with Download Statusbar v0.9.10 by Devon Jensen UnMHT v6.2.0 by http://www.unmht
-
How to create an Attribute set
Hi Everyone, i am learning OAF....right now going through PPR.I was referring the sample tutorials where i came across attribute sets in the PPR Example, which i believe were created as per requirement.So not able to proceed further till i get some c
-
What is the use of E/F tables?
What is the use of E/F tables?