Function which determines the selection period dropdown on MSS Reporting

Hi
I need the function which detemines the dropdown of the selection period on the MSS reporting screen on the Portal.
I know that function: HRWPC_GENERAL_KEYDATE_GET determines the default keydate.
Can anybody please assist?
Regards
Margariet

Hi
Is there anybody who can assist me with this please?
iet
Regards
Margar

Similar Messages

  • Customizing MSS reporting selection period dropdown list

    We have diffrent ABAP programs that uses the PNP logical database and we want to customize the period selection dropdown list on the MSS reporting iview. In same scenarios we want to display only 'Today'. In these scenarios we use the report together with a variant.
    When the user execute the report, the selection period on the variant is used and that is 100% correct. The problem is that the user change the selection period on the frontend (on the Iview) and this is not what is reflected on the output of the report, becasue the report uses a variant.
    Therefore we want to customize the period selection dropdown list on the Iviewin the scenarios where a report uses a variant.
    I know that we cannot customize the perido selction on the Iview, beacue we cannot set the properties on the Iview.
    Is anybody familiar with how we can accomplish this.
    Regards
    Margariet
    << moved by moderator - check out the list of other forums on top of portal forum >>
    http://forums.sdn.sap.com/thread.jspa?threadID=1239838&tstart=0
    Edited by: Anja Engelhardt on Feb 9, 2012 11:42 AM

    Hi Darren,
    We do have a property in the iview for which you can set the period. You need to know the name of the property. Give us the iview name so that we can have a look.
    Cheers,
    Sathya

  • Team Calendar warning - No Team setup for the user in the selection period.

    Good morning,
    I am attempting to replace the older iViews (leaverequestapprover and teamcalendar) with the newer iView (approveleaverequest) which seems to combine the two functions.
    When implementing the approveleaverequest iView, I get the following mesaage "No Team setup for the user in the selection period. Contact Administrator."
    However, looking at the older Team Calendar iView, teamcalendar, I can see the team.  Both iViews are assigned to the Team page for comparison.
    Not sure what's wrong but I'm confident I have all the configuration correct else the test team members wouldn't be appearing in the older iView.  I've read some other unanswered posts that asked the same question and rechecked all the objects people had suggested.
    What's even more puzzling, if I have one of my managers submit a leave request to their manager, the approveleaverequest iView will show the entire team with the leave request for the manager waiting for approval.
    I'm stumped and could use some guidance on how to get the team calendar to work.
    Kind Regards,
    Garrett Meredith

    Re: Manager unable to approve employee leave
    chk above thread once and chk any authorisations are missing or else assign and test once for some users
    and you need to activate wdabap business function ess_wda_2 in swf5 if ur using abap functionality HCM, ESS on Web Dynpro ABAP 2 - Human Capital Management - SAP Library

  • Payment run error "No check exists which meets the selection criteria"

    I have done a payment run successfully, maintained a variant for the check print program but when I want to display the cheques i get this error: " No check exists which meets the selection criteria"  
    I have mantained the check lot for the house bank and the ID as well.
    What could be the problem? Please help.
    Regards
    Debra

    Hi
    I have checked FBZP t. code and the check lots , all seem to be in order. I still have not found out where the problem is.
    Thanks Shammi
    Regards
    Debra

  • HT5219 Do you need a Thunderbolt 2 Cable to get the speed out of a Thunderbolt 2 Port? Or is there just one kind of Thunderbolt cable, and its the Thunderbolt 2 port which determines the speed?

    Do you need  or is there a specific Thunderbolt 2 Cable to get the speed out of a Thunderbolt 2 Port? Or is there just one kind of Thunderbolt cable, and its the Thunderbolt 2 port which determines the speed?

    Hi XChip73,
    The links below will answer your questions about specific cable needs for Thunderbolt 2 and how the speed is determined.
    Apple - Thunderbolt: Next-generation high-speed I/O technology.
    Apple Thunderbolt cables and adapters - Apple Support
    Cheers,
    -Jason

  • Cs6: Masking mode doesn't function - can paint the selection correctly - but then clicking the masking tool icon - nor selection ist made. Can I repair that?

    Cs6: Masking mode doesn't function - can paint the selection correctly - but then clicking the masking tool icon - nor selection ist made. Can I repair that?

    Can I repair that?
    Repair what? Your description seems a bit unclear, maybe posting a few screenshots can help clarify the issue.
    Are you talking about Quick Mask Mode?

  • Auto-populating the selection screen parameters for web report

    hello
    i am having a scenario where my web report is a link to another internet application (a BSP application) and it is called by clicking some link or button on the BSP page.
    can i pass the selection values for BW Web report directly from BSP application through a query string or by setting some cookie values so that the user will directly view the report on click of that link?
    Thanks in advance.
    Regards
    Rajeev

    we can do this by adding a URL as the query-string with web template_id and with the selection screen parameters as key value pairs

  • How determine the selected rows in a table

    Hi All,
    I have a table with a multi selection enabled. Now if the 3 and 5 rows are selected how do I determine this using properties or methods/apis?
    Thanks in advance.
    Best regards,
    Divya

    Let <i>Rows </i>be the context node to which the property Table.<i>dataSource</i> is bound.
    Then you get the selected context elements / table rows via the context API:
    for (int j = 0, n = wdContext.nodeRows().size(); j < n; ++j)
      if (wdContext.nodeRows().getLeadSelection() == j
        || wdContext.nodeRows().isMultiSelected(j)
        /* row at index j is selected */
    Armin

  • What determines the selection of first-listed reviews of an add-on?

    The first page listing an available add-on offers selected reviews, with the option to open another page presenting all reviews. What determines which reviews are selected for the first page?

    hello, the user reviews are sorted by date.

  • FSG - Need to determine the first periode value in year

    Hi
    can anyone help me please
    i need to create a column or row in FSG with the first period balance value in years
    for example of the template is:
    parameter period is Mar-12
    Amount
    Balance of Jan-12 10,000
    Balance of current period 12,000
    thanks
    Lim Johny

    Hi;
    What is EBS version?
    Please review:
         How to Create FSG Report to show a Row Only if the Balance is Debit or Credit [ID 754162.1]
         How to Create a Row Set, Column Set, or Content Set report [ID 108305.1]
         FSG Functional Troubleshooting Guide [ID 136328.1]
    Hope it helps
    Regard
    Helios

  • End Date of the Selection Period defaults as tax year end date in P45

    Hi,
    We have recently implemented both HRSP'S and CLC'S. In addition to this, we have also applied the following SAP Notes:
    1. 1305238
    2. 1309852
    3. 1310431
    4. 1316197
    Despite this, we are still having the below problem with the P45 Program.
    The End Date of the Person Selection Period automatically defaults to the end of the tax year, we are now unable to overide the date suggested by the system.
    Can anyone suggest the cause of this issue.
    Rgds
    Sandy

    Hi,
    With the Inyear movement legal changes ,HMRC have now introduced a check where in P45 cannot be produced for leavers who have a future leaving date 30 days from the current date.
    In line with the above changes,the chance of issuing P45 for future leavers is now checked by the P45 program even though the person selection end date is the tax year end date . So that's why the date is getting defaulted from the tax year.
    Hope this could solve your issue.
    Regards
    Roop

  • Userexit which determine the confirm delivery date in order creation

    Hi,
    I need to obtain the ATP details which contain confirm delivery date of all the lineitem. The BAPI BAPI_MATERIAL_AVAILABILITY determine the material availability date but not the Confirm delivery date. But I require the Confirm delivery date which will be calculated based on picking, working day ...
    Is there any userexit available to determine the Confirm delivery date from the material available date.
    Pls help..urgent..
    Thanks
    Suresh Kumar

    Hi,
    The userexits related to the material availability during sales document processing are:
    User Exits For Availability Check
    The user exits named here are planned for projects that are to be carried out in agreement with SAP development as they may only be used in consultation with SAP. SAP provides no guarantee if they are used without our advice!
    USEREXIT_PLANT_SELECTION in program RV03VFZZ is an exception to this rule (see below).
    User exits in program FV45VFZZ
    USEREXIT_ADD_FIELD_TO_HEADER
    USEREXIT_ADD_FIELD_TO_LINE
    User exits in program FV45VFZY
    USEREXIT_DELIVERY_GROUPS
    USEREXIT_MVERF_INIT
    USEREXIT_QUOTA_KEY_VALUE
    User exits in program RV03VFZZ
    USEREXIT_AVAILABILITY_IN
    USEREXIT_AVAILABILITY_OUT
    USEREXIT_DARA_REFRESH
    USEREXIT_PLANT_SELECTION
    This might be of some use.
    Thanks and regards,
    Satya

  • MacBook pro 13 mid '09 not going to sleep after the selected period

    Hi i am kinda new to this so i don't know if I am doing this right. Well this is the problem, when i leave the mbp on it's own for a while it doesn't go to sleep after the designated period of time. The laptop goes to sleep when the lid is closed and i have tried the usuals such as resetting the PRAM, restarting, restoring the default sleep times etc. I know this is not a major problem and I probably wasting your time and I'm sorry but it's just one of those annoying things!
    Thanks in advance!

    Is this a new Apple battery? If so bring it to an Apple store for evaluation and probable replacement.  If it is a third party battery, it may be suspect.
    Ciao.

  • How to print the selection screen variant as a report header

    I want to print the variant selected on the selection screen as a report header in the report painter.....Kindly help....The variant selected prior to generating the report painter output must be displayed on the final output screen as the header on the screen...

    Hi
    Here you've to use 'Z_HEADER_FOOTER' function module at TOP-OF-PAGE
    Just pass parameters for report_name                 as repid
                                              show_select_options  as 'Y'
                                              show_parameters       as 'Y'
                                              line_size                       as you wish
                                              action                           as 'X'
    Hope this fulfills your requirement
    Thanks
    Suren

  • Increasing the timeout period for a custom report

    Dear Friends
    I have written a Program (SE38) which uses multiple select commands to search data from different tables and then generate a report. When I had less data, it was working properly. HOwever, with more data it times out.
    Is there a way to manually change the timeout settings for this program only.
    ANy feedback will be highly appreciated.
    Thanks
    Ram

    >
    Prasad Ram wrote:
    > Is there a way to manually change the timeout settings for this program only.
    Think about it, if this would have been the case every developer would then have changed the timeout settings for the program which was not performance efficient
    Instead of concentrating on the solution for evading the timeout you should rather focus why it is occurring at first place.
    BR,
    Suhas

Maybe you are looking for