Functional ackonwledge ment positive status 16

HI
we use OPUS as warehouse mgt and SAP ECC 6.0 for ERP , we recieve ASN's Via IDOC to AS400, we did't seem some ASN's on OPUS which we can see on SAP i checked the DESADV idoc status message showing Status 16, so is something to do with AS400 or SAP if IDOC sent to external system means we need to fix something on AS400(ie port ) or this is related to XI
Thank you
ash

xx

Similar Messages

  • Internal error in FORM/FUNCTION CKMC_REVALUATE_ENDING_STOCK in position 1 with RC

    Hello SAP Gurus,
    I am getting this error while trying to close a material in Material Ledger Cockpit
    Internal error in FORM/FUNCTION CKMC_REVALUATE_ENDING_STOCK in position 1 with RC
    Message no. C+099
    Procedure
    Please inform your system administrator.
    CKMC reports no inconsistency.
    Does anyone have any suggestion?
    Cheers,
    TD

    Shipa,
    Thanks for your suggestions.  Thanks for taking the time to help.
    I was able to resolve these issues using the following steps in our sandbox/test environments.  I have also included other problems I faced in material ledger month end closing steps for the benefit of readers.
    **** Caution:  Do not do the following steps in production environment.  You will destroy your production data irretrievably.  Material Ledger is unforgiving!!! ***
    1.  For the materials with "Internal Error in Form/Function etc issue, I performed a CKMM in the respective plants changing for 3S to 2S and then did the same in reverse (2S to 3S).  Then ran the ML close.  This seems to have temporarily solved the problem.
    2.  I was also getting a short dump -- either during MMPV or during period close in the cockpit.  The message at both times was "Error in MLCCS ...".  I realized it related to Cost Component Split.  I identified the company codes of the materials that caused the errors, then got all the plants within each of these company codes.  I ran MLCCS_RESET and then MLCCS_Startup in SE38.  Then ran MMPV/ML Close.  This seems to have resolved the issues at least temporarily.
    3.  Occasionally I noticed some "material valuation is inconsistent in valuation area xxxx" error.  I executed steps 1 and 2 above in succession.  This seems to have resolved the issue temporarily.
    4.  There was also the issue of "duplicate entry in CKMLKEV" while performing Single/Multi-Level steps in the closing cockpit.  This pointed to MLCCS.  So I ran step 2 above.  Again this seems to have fixed the issue temporarily.
    I was able to accomplish all of these using the steps above because these were in our test environments.  The reasons as to why these happened are manifold:
    MMPV was not carried out for a long, long, long time in certain plants within a company code.  When ML is active, it is necessary to close previous period.  In cases where MMPV was not carried out for a long time, I ran CKMHELP program to set the material status to 70 for the immediately preceding posting period.  This helped run the ML cockpit for the current/previous periods.
    Users were processing too many transactions with unrealistically large quantities and prices resulting in overflow errors.  I carried out reversal of movements for each process category to reduce the inventory balances to reasonable quantities, and ran MR21 to set the prices correctly.  This helped resolve the overflow issue.
    Reckless, repeated running of CKMM and MLCCS_Reset/MLCCS_Startup also contributed to these problems.  Every time a standard had to be released, but the material status in ML is "30-Quantities and Values entered", would prevent users from doing that. So they resort to CKMM and then reset status using CKMHELP program to set the status to 10 and then release the new cost.  It works, but wreaks havoc on ML as a whole eventually.
    Hope my comments are useful for some!!!
    Cheers,
    TD

  • Internal error in FORM/FUNCTION CKML_F_BUILD_INDEX in position 1 with RC 4

    Hi,
    Whenever I am trying to post a GR against PO I am receiving the following error message:
    Internal error in FORM/FUNCTION CKML_F_BUILD_INDEX in position 1 with RC 4
    I am not able to understand what this message is telling.
    How to resolve. Pl suggest.
    Regds
    Amitava

    error is because of a program bug,
    fix can be found in OSS note 1015263

  • Internal error in FORM/FUNCTION OUTSPLIT_SCLAE_UPDOWN in position 1 with RC

    Hi All,
    when I try to do MFBF with reporting points I'm getting error "internal error in FORM/FUNCTION OUTSPLIT_SCLAE_UPDOWN in position 1 with RC4" can anybody give me some idea to how to comeout of this error.
    Thanks and Regards
    Ramana

    we have contacted SAP and they have resolved the issue.
    Regards
    Ramana

  • Internal error in FORM/FUNCTION CKMLKEPH_ROLLUP in position 2 with RC 4

    The order settlement terminates with the error Message no. MLCCS 099 "Internal error in FORM/FUNCTION CKMLKEPH_ROLLUP in position 2 with RC 4".
    The material ledger is active. The actual cost component split is active. I want to  carry out the order settlement for one plants.
    With the same production material no.in the plant. There are many other productin order are settled in thid period. But, only one production order got the error message, why?
    I knew that I could change the Price determ. (in material master) from 3 Single-/multi-level to 2          Activity-related, then I can continute settlement transaction in CO88. But , I want to know what's wrong this the order. What should I check about the order. Why other orders are settled without error with the same material no, and  plant.
    I had check about SAP note 711416 & 729901 & 523100 & 623701 & 653523, those can't slove my problem in CO88.

    Thanks for your answer.
    But, I have two production orders product the same material in the same plant and  will be settled in this period. Both of those two orders were consumed material in 3 months ago. But, only one of them were terminated with error message in CO88. Why? How can I find out the difference between those two orders? They seems the same.
    For SAP note 623701 & 871926 & 867755, I think we already implemented those. I had found program "MLCCS_KO88_TREATMENT " in SE38. And, I can find the message 013 & 015 in message class MLCCS. So, do you have other commendations?
    Do you know how could I check about "Display order history" that mentioned in note 86775. Which T-code should I go to?
    Thanks a lot.

  • KO88:Internal error in FORM/FUNCTION CKMLKEPH_ROLLUP in position 2 with RC

    hi,expert,
       When i settle production order , it issue MLCSS099 error.
       The message is ' Internal error in FORM/FUNCTION CKMLKEPH_ROLLUP in position 2 with RC 8'.
       The report 'MLCCS_KO88_TREATMENT' can not solve the problem.
       How to correct this?
      Thanks for advance.
    Tony

    Hi Tony,
    The error during the order settlement is produced because in earlier
    periods the cost component split for standard price is missing
    for the materials involved in the order that you are trying to settle
    with KO88.
    Please, change the settings in report MLCCS_KO88_TREATMENT to treatment
    option "S" for this order as explained in the note 623701.
    You need to delete the existing entry settings in program
    MLCCS_KO88_TREATMENT first.
    Afterwards, it should be possible to maintain the new settings for
    period ?/2011 (treatment type 'Split Delta by S price').
    Therefore, the steps should be:
    1. Delete the existing entry in program MLCCS_KO88_TREATMENT
       (-> processing type: delete settings), for the company code
       and period X/XXXX.
    2. Maintain option = 'Split Delta according to Standard Price,'
       with report MLCCS_KO88_TREATMENT for the orders that are causing
       the problem and period X/2011.
    I hope this helps you to solve the problem.
    Kind regards,
    MLM

  • What is excatly the fastpath of function codes in pf-status

    Hi friends,
    I would like to know what is excatly the fastpath of function codes in pf-status. I thought
    at first that I can choose a letter and in my program press Alt+letter and the function code
    will be executed but it did not work for me.
    Please help me.
    Regards,
    Udi.

    Hi aRs,
    Thank you for answering me.
    Is the fastpath is also for buttons or only for menus?
    Regards,
    Udi.

  • What was the exact functionality of "Device Control/Status.vi" (version 5)? Is there any vi in Labview 6.1 which performs the same tasks?

    I have a vi developed in LabVIEW 5.1 and I want to upgrade it to LabVIEW 6.1. So I must replace "Device Control/Status.vi" with a newer one but I do not know wich vi performs the same tasks in v6.1

    The Device Control/Status.vi is included with LabVIEW 6.1 as part of the serial compatibility VIs. You can find it by opening up and looking at
    Instrument I/O -> I/O Compatibility -> Serial Compatibility -> Bytes At Serial Port.vi
    Also, if you open up the VI found in
    vi.lib/platform/_sersup.llb/serial line ctrl.vi
    it will expose the functionality of Device Control/Status
    Thanks,

  • Problem about Sales Order Position Status

    Hi everyone,
    I have defined a custom status profile with some custom status for my sales order positions.
    What I really need to know is how to check, from any user-exit while saving the sales order, If the status in my schema has been changed by the user, in order to execute some extra functionality.
    I would be very grateful if someone could tell me which structures should I analyze.
    Thanks in advance and best regards.
    Ben.

    If you set a breakpoint in sales order process, check the value of the following internal table
    (SAPLBSVA)jsto_buf[].
    Note:- This internal table will not get populated if user never navigates to the status screen.
    Another option is interrogating field RV45A-ASTTX. This field will store all the status that the order has.

  • How to translate function codes from GUI-status into other language ?

    Hello experts,
    I've a programm called mrs - multi resource scheduling.
    This programm has texts in english and german.
    Now I want to translate the text also in italian.
    When I opne the programm in se80, in path GUI-status
    there are the ui-elements (Function codes).
    When I open them in english, I get the texts in english, when
    I open them in german , I get the texts in german.
    Openeing in italian shows me the english texts.
    Changing them into italian I get message:
    You can only maintain the object in modification
    lang. German (DE) in this system
    If I proceed in translating the german text in italian, I get italian texts instead of german.
    Some ideas ?
    Thanks Gerd

    Use [SE63|https://www.sdn.sap.com/irj/scn/advancedsearch?query=se63&cat=sdn_all].([Translating Objects Directly|http://help.sap.com/saphelp_nw04/Helpdata/EN/41/71601b3ab0f34a8e00aa01338c68f3/content.htm]) else work on a system where italian language is installed.
    Regards

  • Function Modules for System Status update and reservation for service order

    I am sending the service orders data using IDOCS.
    once the IDOC is received successfully i need to do 2 things:
    1. Update the system status of the service order with the status 'SPV2'.
    2.  Create the reservation for the service order.
    Is there any function modules avilable for both of these process.
    If not how i can do these two things in ABAP Code.
    please help me out in it.

    check whether this Fm's helps you
    STATUS_CHANGE_INTERN
    CO_IH_SET_STATUS_EXTERNAL
    CO_IH_STATUS_FM_SET
    BAPI_ORDER_CHANGE_STATUS_GET
    BAPI_APPREQUEST_SETSTATUSVARNT
    BAPI_ALM_ORDER_MAINTAIN
    BAPI_RESERVATION_CREATE
    Edited by: Keshu Thekkillam on Oct 26, 2009 5:10 PM

  • Table for position status in sales order?

    Hi veryone,
    I would be veru grateful if someone could help me to find a table in which I can find the status of a certain position in a sales order.
    Thanks in advance and best regards.
    Ben

    Hi
    Please check the tables...
    VBUK - for Header status
    VBUP - Item status.
    Thanks,
    Ravi

  • Function to change CATS status to released for approval

    I have a requirement where I need to change in batch cats records from status 10 to status 20 'released for approval'
    I can't find how to change the status in  BAPI_CATIMESHEETMGR_CHANGE
    and another function CATS_APPROVAL only works for approving or rejection of records.
    is there another bapi or function which I can use to change the record status of cats ?
    or the other way around is also acceptable that I can set the status back from '20' released for approval to '10' locked.
    kind regards
    arthur de smidt

    when debugging cat2 I found a form which handles the release for approval. but I'm nog sure if there is more to it. for so far I can see it updates the status directly and that's it. when I go further on I come in the screenpainter prog. any clues if it's normal to use this code for my own abap ??
    further on I don't understand the function of ASSIGN_FIELDS_IN_ICATSD ?
    can somebody explain this one ??
    include : LCATSF33
          FORM FREE_ONE_CELL                                            *
          free one cell on dynp                                         *
    FORM FREE_ONE_CELL USING U_NUMBER
                             U_WORKDATE LIKE CATSDB-WORKDATE.
    assign the correct fields
      PERFORM ASSIGN_FIELDS_IN_ICATSD USING U_NUMBER.
      IF <STATUS> = STATUS-LOCK OR <STATUS> = STATUS-REJE.
    count records
        TOTAL_RECORDS = TOTAL_RECORDS + 1.
    date in the future ?
        IF TCATS-FUTURE IS INITIAL.
          IF U_WORKDATE > SY-DATLO.
            FUTURE_RECORDS = FUTURE_RECORDS + 1.
            MESSAGE S024 WITH FUTURE_RECORDS TOTAL_RECORDS.
            EXIT.
          ENDIF.
        ENDIF.
        READ TABLE ICATSDB WITH KEY MANDT = SY-MANDT
                                    WORKDATE = U_WORKDATE
                                    COUNTER = <COUNTER>
                                    BINARY SEARCH.
        IF SY-SUBRC = 0.
          ICATSDB-STATUS = STATUS-FREE.
          IF ICATSDB-ACTION IS INITIAL.
            ICATSDB-ACTION = ACTION-UPDATE.
          ENDIF.
          MODIFY ICATSDB INDEX SY-TABIX.
          <STATUS> = STATUS-FREE.
    set global marker that data have been unlocked
          FREE_DATA = YX.
        ELSE.
          MESSAGE X030.
        ENDIF.
      ENDIF.
    ENDFORM.
    kind regards
    arthur

  • How To Get Spry Slide Function To Remember Position?

    Hello,
    I'm building a site with a horizontal bar that has dynamically loaded thumbnails of images, and the user can click on the left arrow or right arrow to "slide" the images left and right (a bit like the most recent Netflix interface, if you've seen that). In an effort to do it quick 'n' easy, I employed the Spry Effects (SpryEffects.js)--specifically, the slide function ( MM_effectSlide(), or Spry.Effect.DoSlide() ).
    I would like the user to click on the right arrow and see the next, say, 10 images, and then the next 10 and so on. To achieve this, I created a long DIV inside another "masking" DIV and told Spry to slide the inside DIV. This all works well.
    However, I'm having trouble getting the Spry to start from the CURRENT position and slide to a new position. If I leave the "from" option as null, it still starts from a position other than the current position.
    Does anyone have any tips/pointers/suggestions? I'd rather not recreate the entire Javascript functionality, but rather hack the existing Spry functions.
    Thanks in advance!
    JP

    It sounds to me as though you're using the wrong Spry feature. To do what you want, you need Spry Sliding Panels.
    Unfortunately, Spry Sliding Panels are not incorporated into Dreamweaver, you need to code everything yourself. The documentation is here:
    http://labs.adobe.com/technologies/spry/samples/slidingpanels/SlidingPanelsSample.html. You'll also need to download the Spry framework from Adobe Labs to get the relevant external JavaScript files.

  • Function Module for WBS Status

    Hi all.
    ECC 6.0.
    I am trying to figure out a way to reach the status of a WBS element; CNJ_STAT-STTXT_INT. Does anyone know of a function module that could perhaps read this status or another way to do so? I do realize that the include FCJWBO00_STATUS_TXT_FILL can read the status, but surely there must be a FM for this as well?
    Thanks for info.

    Hi,
    What about BAPI_BUS2054_GET_STATUS?
    Regards,
    Eli

Maybe you are looking for