Functional advise needed

Hello SDN,
I have in one data flow, using 0EC_PCA_2 extractor. On another flow, due to the need for more details at plant level, I am extracting from GLPCT via generic datasource.
Is it a advisable to use these 2 flows (1 having less detail data) to give reports which need 2 levels of details?
What I am not sure is whether the standard extractor data is apple-to-apple with data from generic GLPCT.
The only difference I know is that GLPCT data is 1 level more in detail than PCA_2 data. But a standard extractor is extracting in complex ways from multiple tables. How could I possibly know if the 2 datasets are apple-to-apple?
You advise would be greatly appreciated.
Regards,
Suzie

Hello Sat,
The part that I'm unclear is not so much the standard extractor but GLPCT totals table. Although a totals and not line items table, it can provide the plant level details. This is clear to me.
I would like to hear from experts here who have done this before, is GLPCT data compatible with standard extractor 0ec_pca_2? I guess this is more functional related question since its about the meaningfulness of the data.

Similar Messages

Advise needed with New Mac OS releases.

Hi,
I'm new to the Mac world, and having a lot of difficulty follow these posts to try and fix the many problems I have encountered since upgrading to SL. Is SL a typical release for Mac? It seems I should have waited for more fix releases, to be available before upgrading, but the conversion from my PC to my Macbook in July went so well and Leopard was operating flawlessly for my needs that I just went ahead and upgraded to SL.
What now, how long before Apple will fix all these problems. This is worse, at least, for me then when I upgraded from XP to Vista, which for a lot of PC users at the time was a disaster. I fell back to XP and and never returned to Vista. I eventualy bought my MacBook instead, and now I'm in a similar situation with no experience...
Because of my inexperience with the Mac system I'm afraid to try and fall back to Leopard and risk making my situation even worse. What if Time Machine fails to get back all my data
after Clean install of Leopard.
Any advise will be so much appreciated. With all the experience out there I'm trying to get a feeling of is it best to stay with SL a wait for the fixes, or chance going back to Leopard, until a stable better functioning version of SL is available. For a while there I thought all my computer problem were behind me as my Mac and leopard were working so reliably, and smoothly. I guess being an early adopter of any new OS is not a good thing unless there is some real need, which there was not in my case.

HI,
*"For a while there I thought all my computer problem were behind me as my Mac and leopard were working so reliably, and smoothly."*
It's difficult to help you if you don't tell us exactly what's happening.
Yes, Snow Leopard is an upgrade from Leopard. 10.5 to 10.6
One thing to keep in mind. If you download and install updates as they become available, they won't necessarily include the patches or fixes for problems you are encountering. The Software Update window will have the links available for the updates so you can read the documentation before installing.
This is the docs for the 10.6.1 update.
http://support.apple.com/kb/HT3810
http://support.apple.com/kb/HT1222
If you could reply and provide details to the problem you are having, then we can try and help.
Carolyn

Customizations JSP; advise needed

To implement the following I hope to get some advise.
I will first explain the case:
2 tables: ARTICLES and ORDER_LINES
ARTICLES
========
id (PK)
code (UK)
description
price
vat%
vat
ORDER_LINES
===========
order_id
line
article_id
amount
price
vat%
vat
As you can see the columns price, vat% and vat are also included in the ORDER_LINES table.
This is done because the values can be different then the default values (in the ARTICLES table).
In the order line JSP page I'd like to display the
Article code, description, amount, price, vat% and vat.
The code, description, price, vat% and vat MUST be entered by invoking a LOV on the Articles.
The price, vat% and vat can be changed after invkoing the LOV
The problem is I don't know how to give back more than 1 value with a JHeadstart LOV!
How can I solve this problem best?

There are a few stept involved.
1 To be able to pass a comma delimited list of items you are interested in, you need to change the lovPopup.jsp to take an extra parameter, e.g. <bean:parameter id="lovDescriptorAttributeNames" name="lovDescriptorAttributes" value=""/>
2 Modify the JavaScript function jspLovPopup to take this as a (string) parameter. In this function you use this string to find the items in the calling form and put pointers to these items in a global variable.
3 Change the lovSearchResults.jsp page to take a comma delimited list of values as a parameter.
4 Modify the JavaScript function chooseLovValue to take this as a (string) parameter. In this function you copy these values to the items in the global variable with pointers.
Jan Kettenis
JHeadstart Team

Functional Module:Need some sample source code.

Hi All,
I have created a customized table   u2018ZStock_Order_Dealeru2019 with the following fields:
Stock_Order_Dealer
Dealer Number
S2D order Number
Line item Number
Material Number
Ordered Quantity
Batch Number
Received Quantity
S2D from D2G
Receiving Date
I need to create a remote enabled function module in CRM system to fetch the u2018Batch Numberu2019 and u2018Received Quantityu2019 fields when the Material Number is fed to it.Please note that the input and output should be tables.
Could some one please give some sample source code for this.

I used table types and select queries to resolve this problem.

Function module needed for customer exit variable need to use in Bex report

Hi Experts,
I have a requirement where i need to get Cummulative result between two interval periods.
If user gives single mandatory input value - 002-2009
for one Scenario:-
Project start Date untill Pervious year i.e December 2008
Where project start date will get from one of the field in my BW CUBE
can anyone help for the customer exit function code for this scenario. As i am into BI i dont have idea in ABAP.
Please help sample cod for this .
Thanks,
Anil.

I had created one customer exit which had fullfill my requirement.

Cross-Browser (BASIC Functionality) Issue - Need to boot to Windows in parallels to use the websites I need - PLEASE HELP!

Hey Everyone,
Let me lead with my system specs. If you need more info, please let me know and I'll be happy to supply them. I'll be sitting by my computer all night, glaring at my Snow Leopard Install Discs and hoping that you guys don't say that the only thing left to do is a clean install of SL, then re-upgrade to lion.
So, a few months ago, I noticed that certain components on websites wouldn't work. They would be pretty basic - simple buttons at first. Then certain submission forms wouldn't process. Then, recently, there has been a complete loss of video playback on certain websites. And the final straw, the Vuze software update button will not click through.
In order to work around these browser break downs, I've had to launch Linux/Windows 7 or 8 (depending on wether or not I wanted to make myself even MORE frustrated by using metro) to do my web browsing.
Here are a few examples. Again - ALL these websites work in other operating systems.
Groupon - via http://www.groupon.com/subscriptions/new?division_p=philadelphia
The "Continue" button does not function. It will depress on click, and highlights on mouseover, but it will not lead to the next page.
A Picture is Below.
Math Warehouse - via http://www.mathwarehouse.com/quadratic/quadratic-formula-calculator.php
This site houses a calculator for the quadratic formula and other nerd tools - but essentially, just a standard forms with fields. Clicking the "Solve the Quadratic Equation" button does not work. In fact, in this case, mousing over causes the pointer to turn into a text curser.
Picture below.
Vuze - Internal App
Clicking this button does nothing. Nothing at all.
I've posted a similar thread when this first happened, where I included activity monitor and consol logs, but no one could make heads or tales of them. one guy even said there was nothing wrong.
i know steve jobs said that macs were the best hardware around for running windows. I don't think that this is what he meant.
Any and all help, is really, really appreciated.
Thank you,
Bernie

Hey Everyone,
Let me lead with my system specs. If you need more info, please let me know and I'll be happy to supply them. I'll be sitting by my computer all night, glaring at my Snow Leopard Install Discs and hoping that you guys don't say that the only thing left to do is a clean install of SL, then re-upgrade to lion.
So, a few months ago, I noticed that certain components on websites wouldn't work. They would be pretty basic - simple buttons at first. Then certain submission forms wouldn't process. Then, recently, there has been a complete loss of video playback on certain websites. And the final straw, the Vuze software update button will not click through.
In order to work around these browser break downs, I've had to launch Linux/Windows 7 or 8 (depending on wether or not I wanted to make myself even MORE frustrated by using metro) to do my web browsing.
Here are a few examples. Again - ALL these websites work in other operating systems.
Groupon - via http://www.groupon.com/subscriptions/new?division_p=philadelphia
The "Continue" button does not function. It will depress on click, and highlights on mouseover, but it will not lead to the next page.
A Picture is Below.
Math Warehouse - via http://www.mathwarehouse.com/quadratic/quadratic-formula-calculator.php
This site houses a calculator for the quadratic formula and other nerd tools - but essentially, just a standard forms with fields. Clicking the "Solve the Quadratic Equation" button does not work. In fact, in this case, mousing over causes the pointer to turn into a text curser.
Picture below.
Vuze - Internal App
Clicking this button does nothing. Nothing at all.
I've posted a similar thread when this first happened, where I included activity monitor and consol logs, but no one could make heads or tales of them. one guy even said there was nothing wrong.
i know steve jobs said that macs were the best hardware around for running windows. I don't think that this is what he meant.
Any and all help, is really, really appreciated.
Thank you,
Bernie

Hard drive failed after update. Advise needed.

First the system hangs. Then it took a long time to boot up. Finally, after a few rounds, the question mark folder appeared on boot up.
I command r boot it. Sometimes it says disk has a hardware problem and smart status failing. Sometimes it is ok, but cannot erase last block on formatting. I tried to reinstall OS, but it couldn't find the disk for installing.
Is this really a hardware issue? I'm taking my mac to a reseller tomorrow. Should I be expecting to buy a new hard disk?
Appreciate any help or advise.
MacBook Pro 13" mid 2012.

If it's in warranty have it done at the Apple Store. If you are doing it yourself:
Install Mavericks, Lion, Mountain Lion on a New HDD/SDD
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your external hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

RFC Function module needed for getting table details in APO from R/3

Hi,
I need a RFC function module where I can write a query from R/3 to access APO server database table and get the necessary records.
Regards
Mac

Possible ways
1. Call fm RFC_READ_TABLE and give destination and table name ( But i am not sure how it will work SCIF enviornment of APO)
or
2. Create a custom function module in APO side and call from R/3 side using destnation option
a®

BPS-SEM : Material or Documentation : Advise Needed

Hello Gurus,
I need some help in the below topics.
1. SEM Business Planning & Simulation (BPS)
- Focuses on integrating subplans for a business plan, such as planning results, overhead and personnel costs, investments, balance sheets, and liquidity.
- Overhead cost planning with primary and secondary costs
- Balance sheet planning using financial planning functions
- Personnel cost planning
- Liquidity planning and cash flow analysis
If you have any material or documentation. Please let me know.
I already got the SAP PRESS books for
CPM and Balanced Scorecard with SAP
by Marco Sisfontes-Monge
Business Planning with SAP SEM
by Roland Fischer
Also the below topics:
2.SEM Corporate Performance Monitor (CPM) (+++)
- Measure Builder functions
- Assignment of data sources
-Balanced Scorecard application
- Balanced Scorecard design
- Risk Management application
- Risk Management design
- Management Cockpit application
- Management Cockpit design
- Value Driver Tree application
- Value Driver Tree design
As always thanks for your help.
Senthil

Hi Senthil,
Please check the links may be helpful.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/s-u/sap%20bw%20business%20planning%20and%20simulation%20-%20how%20to%20guides%20list.htm
https://media.sdn.sap.com/public/eclasses/teched04/BW253_files/Default.htm#nopreload=1
https://www.sdn.sap.com/irj/sdn?rid=/webcontent/uuid/3040dd5d-0501-0010-baa8-fc0aafa88c40 [original link is broken]
http://help.sap.com/bp_biv235/BI_EN/html/BW/CostCtrPlan.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/d-f/enhancements%20bw-bps%20formerly%20sem-bps%20in%20sapnetweaver%2004.ppt
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5d90209f-0501-0010-59a2-9243ac94a4d7
http://help.sap.com/saphelp_nw04/helpdata/en/05/242537cedf2056e10000009b38f936/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/0e/8007dc83d011d3b72e0000e82debc6/frameset.htm
Regards,
Srikanth.

Functional area needs to be used from year 2011-12

Hi
I have defined two ledger - Leading and Non Leading (IFRS). Its working fine since two years and all data are populating in both the ledgers
Now i need to activale functional area (i.e. cost of sales accounting). So is it possible to define functional area and activate cost of sales accounting w.e.f 1st April 2011
Till then I will update my cost center with functional area
Please help.
Edited by: Meenu_ND on Feb 24, 2011 6:04 PM

Hi,
CoS is active or inactive,you can not specify a from date.
The best solution would be therefore to have everything customised (and tested) and in your productive system before 01.04. You can then simply ignore the data generated prior to when you need it.
Kind regards

Function module needed to schedule a report to run in background.

Hi,
I am in need of a basis fm ro schedule a report to run in the background.
There exists a function group BTCH with fm MINI_JOB_WIZARD which is what I need.The problem is that all the import parameters is mandatory
IN_JOBNAME
IN_REPVARNT
IN_REPORT
The problem with the above fm is that it requires a report variant which my report doesnt have since my report has no selection screens.
Can you please suggest me any alternative fms which does the above wizard like stuff without the annoyance of supplying a variant .
Thanks

Try to use the standard FM for submit of jobs :
- [JOB_OPEN: Create a Background Processing Job|http://help.sap.com/saphelp_nwce711core/helpdata/en/fa/096ce5543b11d1898e0000e8322d00/frameset.htm]
- [GET_PRINT_PARAMETERS|http://help.sap.com/saphelp_40b/helpdata/pt/9f/dba5d535c111d1829f0000e829fbfe/content.htm] for ... print parameters.
- [JOB_SUBMIT, ABAP SUBMIT: Add a Job Step to a Job|http://help.sap.com/saphelp_nwce711core/helpdata/en/fa/096ce5543b11d1898e0000e8322d00/frameset.htm] - Use the FM if you have a variant (or call an external program), else use a ABAP [SUBMIT |http://help.sap.com/abapdocu_70/en/ABAPSUBMIT.htm] [selscreen_parameters|http://help.sap.com/abapdocu_70/en/ABAPSUBMIT_SELSCREEN_PARAMETERS.htm] [job_options|http://help.sap.com/abapdocu_70/en/ABAPSUBMIT_VIA_JOB.htm] [spool_options|http://help.sap.com/abapdocu_70/en/ABAPSUBMIT_PRINT_PARAMETERS.htm], you can pass parameters with the [WITH expr_syntax1 WITH expr_syntax2 ... |http://help.sap.com/abapdocu_70/en/ABAPSUBMIT_SELSCREEN_PARAMETERS.htm#&ABAP_ADDITION_4@4@] option.
- [JOB_CLOSE: Pass a Job to the Background Processing System|http://help.sap.com/saphelp_nwce711core/helpdata/en/fa/096eff543b11d1898e0000e8322d00/frameset.htm]
Regards,
Raymond

Function module needed

is there a finction module which converts the format of the amount from
__,__,__,__.__ to __.__.__.__,__ ? Please help. i need the solution immediately.
Thanx in advance.

Hi,
U can make the settings in the user-profile for the format change in the curency rather than using Function Module.
Go to User-Profile and Own data..
There u can set the format for the currency..
Cheers,
SImha.

Function module needed - Convert price to one unit to another

Hi All,
I need FM to covert price to one unit to another.
Any suggestion welcome.
Regards,

sorry the earlier one will convert the quantity this one will covert price
      CALL FUNCTION 'CONVERT_TO_LOCAL_CURRENCY'
            EXPORTING
              date             = sy-datum
              foreign_amount   = w_material-stprs
              foreign_currency = t001-waers
              local_currency   = p_waers
              type_of_rate     = 'M'
            IMPORTING
              local_amount     = w_material-stprs
            EXCEPTIONS
              no_rate_found    = 1
              overflow         = 2
              no_factors_found = 3
              no_spread_found = 4
              OTHERS           = 5.

Function module needed to read all the BOM statuses

Dear Friends,
In a report we are using CS_BOM_EXPL_MAT_V2 function module to get the dispaly the BOMs. But it is displaying only the BOMs which are in Active stauts e.g 1 & 3.
My requirement is needs to read both active and inactive BOMs. Inactive BOM status is 2.
suggest me if there is any another FM or any another way to get all the BOM status materials.
Thanks for your help.
Srinivas.

You need to supply another application for alternative determination (field CAPID). It should be possible to customize one for your needs using "Define Order of Priority for BOM Usages" and "Define Applications" under "Production->Basic Data->Bill of Material->Alternative Determination"
Edited by: Carsten Grafflage on Aug 5, 2010 1:44 PM: Corrected one string from customizing - sorry.

Ignore Function Desperately Needed in Group Chat

Hi,
I've been wondering that why there is no possibility to ignore a user in group chat? This is a mandatory feature in every communication software which provides some kind of group chats - especially in one which have some kind of persistent groups. I've seen several messages regarding this shortcoming in skype.
These things do _NOT_ fill the need:
- Kick the user
- Try to think that the user may have something nice/constructive to say
- Leave the group chat yourself.
Additionally I don't care if the conversation loses some of it's continuity as long as I don't see certain persons messages. There is certain situations when you just need to be able ignore some user and I think I don't have to explain anymore for anyone why this should be possible...
Developers, please add this feature asap.

Only recently I've noticed that there's no such function in Skype. I joined a group chat in which pretty much everyone is nice except from one big douchecanoe which treats everyone semi-decently except for me. I don't wanna leave the group because of all the other people I actually enjoy talking to.
I mean, seriously? Is it something that not enough people are requesting and as such Microsoft isn't deeming it worth implementing? Come on!

Functional advise needed

Similar Messages

Maybe you are looking for