Functional and technical design for reports
Hello BW gurus,
I am responsible for creating/developing few reports in Prod Planning and Inventory Mgmt.
Is there a template for the Functional Design and Technical Design for the reports?
How do I go about making the functional and technical design?
Thanks
jackofalltrades,
If you could give us the stage of the report -
1. whether you are reporting from existing cubes and this report would be an additional one on a existing cube or
2. The report has to be designed from the ground up ...
Depending on the same - the entire lifecycle will be different and also whether the query is to be shown on the web or through excel will be helpful.
You could have a look at ASAP Templates in the meanwhile.
Re: ASAP Methodology
Arun
Similar Messages
-
Want to learn functional and technical requirements for UCM
Hi,
I'm very new to UCM. Can someone please send meplease tell me where to find functional and technical requirements for UCM from user and implementation perspective.
Thanks Very Much,
Andycan you be a little more specific?
Technical info can be found in the documentation. Requirements and so on.
What exactly do you expact from functional requirements ?
Edited by: Yannick Ongena on Nov 30, 2011 5:50 AM -
Functional and technical requirements for CFTE
Hi all,
I have to prepare a pre sales meeting. the potential customer needs to know the functional and technical requirements to implement Cloud for travel and the technical limit. I found some information in the document SAP_OD_TECHNICAL. Does someone has further information ?
Thanks in advance for your help,
best regards,
lucie POLESEPlease refer to the Master Guide and Security Guide located at the link below (you have to select the latest release once you go to the page):
https://help.sap.com/travel-od -
RE: BI functional and Technical Specification
Hi,
Can anybody share BI Functional and Technical Specification for SAP R/3 data extraction for modules FI/CO, SD, MM, WM/MM.
Thanks.Hi Hitesh
Bi Functional Specification is like this where you get the details of what is the report they are looking for and what does that do in detail explanation from the key user of that particular area.
and also you will receive an document saying that the particular tables and fields ...
After receiving that then you will be starting an work by preparing an Design document of what are the objects you are going to use in the system and what type of Data Source your are using and Targets etc.. This is nothing but an Technical Specification... and this also contains what type of the load is it...
Hope this helps you..
Thanks -
InfoSpoke Functional and Technical Specs
Hi all,
I would be interested in seeing a good outline for both a functional and technical specification for an INFOSPOKE. If you have an actual example of either of these specifications it would be a big help. I need it specifically for an INFOSPOKE. I appreciate your help.
Thank you,
DaveHi David,
go thru these links
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/eb462104-0701-0010-07ae-d866630e0989
https://websmp209.sap-ag.de/~sapidb/011000358700002201112003
http://help.sap.com/saphelp_nw04/helpdata/en/66/76473c3502e640e10000000a114084/content.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/f4/5c983cff567f5de10000000a11405a/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
Regards,
Archna -
Functional and technical spects, and tickets issues.
Dear friends,
if any one know abt functional and technical spects documents , ple forward my mail
[email protected]
and also , how end users issue tickets. we can use any third party tools for getting tools and any levels will be there , how tickets will come to u.
ple clarify
Thanking u
suneelPlease describe your experience with BEx (Business Explorer)
A) Rate your level of experience with BEx and the rationale for youre self-rating
B) How many queries have you developed? :
C) How many reports have you written?
D) How many workbooks have you developed?
E) Experience with jump targets (OLTP, use jump target)
F) Describe experience with BW-compatible ETL tools (e.g. Ascential)
2) Describe your experience with 3rd party report tools (Crystal Decisions, Business Objects a plus)
3) Describe your experience with the design and implementation of standard & custom InfoCubes.
1. How many InfoCubes have you implemented from start to end by yourself (not with a team)?
2. Of these Cubes, how many characteristics (including attributes) did the largest one have.
3. How much customization was done on the InfoCubes have you implemented?
4) Describe your experience with requirements definition/gathering.
5) What experience have you had creating Functional and Technical specifications?
6) Describe any testing experience you have?
7) Describe your experience with BW extractors
1. How many standard BW extractors have you implemented?
2. How many custom BW extractors have you implemented?
8) Describe how you have used Excel as a compliment to BEx
A) Describe your level of expertise and the rationale for your self-rating (experience with macros, pivot tables and formatting)
9) Describe experience with ABAP
10) Describe any hands on experience with ASAP Methodology. -
Overall equipment efficency ..functional and technical
Hi
friends
doing a module pool for overall equipment effiency
as iam new in p.m module i need some functional help.
but have to create a z tables for it .
my criteria is
<b>header --</b>equipment
cost center
plant
functional location
<b>detail table</b>.
equipment
from date
from time
to dta
to time
operations--production,
maintaince
ideal
batch
material
reasons
Planned production quantity
equipment
month/hours
god hrs
planned production hrs
reason no
reason code
std hrs/min.
have to create table but iam stuck in normaliazation what should be
keys on and indexes on as there is no functional guy avalab1e here
i have to do it and this module pool should allow to modify delete
and change that can be done but ..on one screen this 2 table control
i have to display .
so pls give the suggestion for functional and technical
regards
answers will be awarded pointsHi,
See the Views VIAUFKS and VIAUF_AFVC ,
you will get all the fields related to PM module
See the fields and the data elemetns and create the tables and use them in the Table controls and design your screens and the code.
see the info on Table controls:
syntax:
CONTROLS .
if you only want to determine the row of the table control. SY´-SUBRC allows you to check if the cursor is placed in a row of a table control.
u need to comment the performs of table control fields and write ur own perform statements. And u have to declare the table control fields as separate internal tables.
Go through this urls.
www.****************
www.sap-img.com
Check the below links.
http://www.planetsap.com/howdo_a.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/dbac5135c111d1829f0000e829fbfe/content.htm
http://sap.niraj.tripod.com/id25.html
reward if useful
regards,
ANJI -
Pls send me Functional and Technical Specs
Hi Guys,
I want to know how Functional and Technical Specs prepared.
Can anybody pls send me both the specs to my mail id.
I will be thankful to one who sends me both the specs.
My mail id is: <removed>
I expect u send me soon.
Regards,
Divya SHi Divya
Go through this links....
Functional specs - tchnical specs
Contents of functional specs for BW project
hope it helps...
Regards
Tarun. -
CRM Functional and Technical Overview
Hi All,
I have not explored CRM completely.
Want to learn functional and technical aspects of CRM properly.
Please suggest some links for good and effective recordings regarding CRM functional and tecnical aspects for the better understanding of beginners.
Thanks & regards,
AbhiHi,
There are lots of courses which would help you understand CRM.
CR-10
CR-100
CR-300
CR-500
CR-600
CR-700
You can check the following link for info on these courses
https://websmp201.sap-ag.de/~form/sapnet?_SHORTKEY=00200797470000072627&
You can also refer to
http://help.sap.com/saphelp_crm70/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
which contains rich amount of information about SAP CRM.
Thanks,
Abishek
Edited by: Abishek Kumar Thiagarajan on Jun 9, 2009 5:06 PM -
Functional and Technical Specification Doc
Hi Friends,
Can anybody send me sample Functional and Technical Specification Documents for SAP CRM/ECC.
Thanks and Regards,
SurajHi Suraj,
Look at <a href="http://help.sap.com/bp_crmv150/CRM_DE/index.htm">Best Practices</a> , maybe it helps.
Regards.
Manuel -
Functionality and Technical configuration
Hi....
If any one have SAP QM functionality and Technical configuration book-late then provide to me
thanks in advance
BhaveshHi Gurus
Thanks for good reply because this will help for all QM leaders....
Bhavesh -
[svn] 2312: CursorManager: New functionality and a fix for SDK-15029
Revision: 2312
Author: [email protected]
Date: 2008-06-30 17:24:01 -0700 (Mon, 30 Jun 2008)
Log Message:
CursorManager: New functionality and a fix for SDK-15029
* NEW: When the mouse leaves a window/stage where a cursor is set, the cursor no longer sits on the edge of the screen until the mouse comes back into the window, it disappears.
* NEW: In AIR, when the mouse leaves an active window and glides over an inactive window (without giving it focus) where a cursor is set, the system pointer will be hidden and the custom cursor will appear while gliding over that window, and disappear when you leave that window.
* FIX: When a cursor is set in a child Window, and the mouse moves over another Window or WindowedApplication, the cursor no longer disappears -- the correct system pointer or custom cursor will display.
* Fixed listener leaks when switching systemManagers (neither Jason nor I can tell when/why it would happen in CursorManager, however).
Reviewer: Jason
Bugs: SDK-15029
Doc: No
QA: Yes, here's an exhaustive list of ideas:
* We'll need tests for the new behaviors.
* For all tests, we need to try behavior in air AND behavior in (sa)player, and test regressions.
* Please test SDK-15583 again, all other cursor tests.
* Take the test case for SDK-15029 and open up TWO MyWindows. Test how the cursors change across all three app windows when they are overlapped like a Venn diagram, with different combinations of custom cursors on and off -- we should have test cases for all of this behavior.
* Test that custom cursors work properly when the mouse leaves a non-rectangular stage with transparency.
* Test mouse drag situations -- drag off stage, release, move back to stage; drag off and back onto stage, etc.
* In my tests, I found a lot of bad behavior in AIR, and player seemed to be fine. Do we have drag and drop use cases for AIR with custom cursors?
A list of some bugs I encountered:
* BUG (cosmetic): If the mouse is outside the stage when a cursor changes for the first time (say you toggle a checkbox which sets the cursor using the keyboard), the cursor will appear on the stage in the last known mouse position. When the mouse returns to the stage, everything will start working correctly again.
* BUG (cosmetic): In AIR, if you drag out, and back into the window, then release, a MOUSE_OUT is fired again over the stage, which is wrong. The mouse coords given are (-1,-1), also wrong. This causes the system cursor to show instead of the custom cursor.
* BUG: In AIR: if you drag off the edge of a Window with a custom cursor, the cursor will vanish. The MOUSE_OUT event correctly event fires while dragging off the window. Even though the handler tells the system mouse cursor to appear, it doesn't -- might be an AIR issue, since the mouse is still dragging when told to show. If you move back over the active window without dragging, the cursor goes back to normal.
* BUG: In AIR: if you drag over another window with a cursor, MOUSE_MOVE events don't fire on that other window until you let go. Therefore, a custom cursor in that window does not get drawn, nor does a system cursor. If you move back over the active window without dragging, the cursor goes back to normal.
* BUG: In AIR: When dragging, off a window, Event.MOUSE_LEAVE only fires after the mouse is let go (unlike MOUSE_OUT), EVEN IF the mouse is dragged back over the window and released over the window. So you're told the mouse left when it didn't.
* BUG: In Player: I could never get Event.MOUSE_LEAVE to fire when added to the stage in saplayer or browser.
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-15029
http://bugs.adobe.com/jira/browse/SDK-15029
http://bugs.adobe.com/jira/browse/SDK-15583
http://bugs.adobe.com/jira/browse/SDK-15029
Modified Paths:
flex/sdk/branches/3.0.x/frameworks/projects/framework/src/mx/managers/CursorManagerImpl.a s -
How to ceate a new Country key,currency ,version and value type for report
hi,
can you please let me know How to ceate a new Country key,currency ,version and value type for report
along with tables and tcodes.
thanking youNot clear on your comments
How to ceate a new Country key,currency,
version and value type for report
because in one line you are saying you want to create Country Key, which means your requirement is in some transaction whereas at the end, you say for report.
Can you let us know you want to develop a report and if so, from which transactions, you want to take datas. You have to be clear on this.
thanks
G. Lakshmipathi -
Need to Update SELECTION TEXT and text symbols for report J_1IEWT_CERT.
Hello Experts,
My requirement is need to "Update SELECTION TEXT and text symbols for report J_1IEWT_CERT".
1. As I want to change text sysmbols for 006 to "Run in preview mode". Currently it showing "Type of output". Issue I am facing here is that whenever I deleting aur changing the same it throws an error : "Text symbol 006 is an original text and cannot b
deleted or renamed". How can I do the same.
2. Secondly I have to add two selection text also i.e. ZFATHER and PREV . And delete two selection text i.e. P_PDF and
P_SCRIPT. In this Tab there is only a Icon of deleting not an Addition button .So How can I add two more selection text.
Above are Manual Activities which is written in note 1486147. We already taken an acess key and it shows in editable mode but
not able to add/deletin/modify selection text and text symbols.
Please provide the solution as it is critical requirement.
Reagrds,
Supriya Bhatt.Hi Vishal Saxena,
Just go through the screens and do it .
[<li> Link1|http://4.bp.blogspot.com/_O5f8iAlgdNQ/SjoVqL9rnvI/AAAAAAAAEs4/fPG7IG9yGK4/s1600-h/3-716953.JPG]
[<li> Link2|http://1.bp.blogspot.com/_O5f8iAlgdNQ/SjoVp3d9uEI/AAAAAAAAEso/ZxfkeNAiOZQ/s1600-h/1-715669.JPG]
[<li> Link3|http://2.bp.blogspot.com/_O5f8iAlgdNQ/SjoVqIbpNpI/AAAAAAAAEsw/2ntYgX-i1Dc/s1600-h/2-716353.JPG]
Thanks
Venkat.O -
Sample Technical design for BSP
Hello I need sample technical design for BSP ...in general i need to know what are specific areas needed to cover in BSP Tech design...
Thanks for HelpHi Pratyush,
Try the below links for sample BSP technical design.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6fc5f6d2-0b01-0010-8faf-e5c5a4bc0fa2
http://help.sap.com/saphelp_nw04s/helpdata/en/e9/bb153aab4a0c0ee10000000a114084/frameset.htm
Regards
Maybe you are looking for
-
How do I unblock someone on an iPod?
I accedently blocked one of my friends, and I need a way to unblock her.
-
Have a 2 year old imac and the email will not send as it is stuck on drafts file
have a 2 year old imac and the email will not send as it is stuck on the drafts file -- any ideas please?
-
How do I require a password for sharing?
I want to share to my iTunes library on another computer on my wireless. It's connecting just fine on the other computer when I set up the option to share on the first one. I added a password in the iTunes Preferences (Sharing Tab) but the second co
-
Method to build a logo splash screen at the start of the DVD
We are attempting to place a logo splash screen on a DVD. We want the logo screen to be viewed at the beginning, when the disc is first inserted into the DVD player. We want the logo to be seen only one time before the main menu appears, and not seen
-
Boot From Snowleopard DVD to install mountainLion from TimeMachine
Hi, can I boot from my Snowleopard DVD in order to install my backup from TimeMachine which is MountainLion. Thanks Torsten