Functional Issues w/ IOS7

Depending on how this discussion board works, I will attempt to update functional issues with this operating system.
9/21/13: Alarm: Setting the alarm is rather akward, the numbers are too rigid, fine, and small. I feel the numbers being larger would be more user friendly.
9/21/13 Calendar: Previous version was superior in certain ways. Shading out a part of the day which you typically don't use (ex: 1am-5:30am) would be great. I feel lost in this update, it does not feel refined. Please allow me to send an appointment through imessage already as well!

Tell Apple.
http://www.apple.com/feedback/iphone.html

Similar Messages

Function issue of Cross-Reference

Hi,
thanks for your attention on this topic.
there is function issue of Cross-Reference.
when click the Cross-Reference after re-installed the software (adobe Framemaker 7.10), the function is not working. please kindly check the screenshots below:
Error message below:
Please help to check this issue.
software: Adobe Framemaker 7.10
System: windows xp sp3
thanks in advance for your support .
Message was edited by: Lu Steven

Fire the error log off to the e-mail address indicated in the error message and then contact Adobe Support.

There are lots of issues in ios7 when those will be fixed for iPhone 5 . and can I retire my iPhone 5 to iOS 6 version ?

there are lots of issues in ios7 when those will be fixed for iPhone 5 . and can I restore my iPhone 5 to iOS 6 version ?

You might want to check out these two threads:
https://discussions.apple.com/thread/5325838?tstart=0
https://discussions.apple.com/thread/5369545?tstart=200
This topic has been discussed ad nauseum, they might give you some ideas on how to deal with the changes. Be sure to leave Apple your feedback on the matter: http://www.apple.com/feedback/ Good luck!

Forum for functional issue

Hi All!
Is there any forum related to functional issues in SD and MM.Please do forward me the names if there are any.
Regards
Pavan

Check these
http://www.sapfans.com/
http://www.erpfans.com/
http://www.sap.com/community/default.epx?logonStatusCheck=0 (Login required)
Regards,
Vikas Madaan

SGD 4.5 Desktop Functionality Issue

I've come across an odd functionality issue on SGD 4.5. When I start "My Desktop" everything works fine. However if I start a new Full JDS Desktop session on another server, the JDS session doesn't appear to load correctly. New windows automatically open in the upper left corner and can't be moved. If I close both JDS Desktop sessions and open the other system first, then "My Desktop" session doesn't open windows properly. Has anyone come across this? It's not to big of deal right now, but it might become more of an issue when more users start using our SGD instance.
Adam

@JRoesler :
The script for installing the users during installation when the users are not created is included some version before the 4.50.907
The SGD version here is only 1 minor version before the latest release.
@aspenhedge:
If I look into the rpm (for Linux install) I don't see a check for a valid shell. It does however try to 'su' into those accounts. I might be wrong in this one.
Can you manually use 'su ttaserv' and 'su ttasys' without any problem? Do these users have a valid home-dir for example.
- Remold

Reminders functionality removed in IOS7 - please make IOS6 version available through App Store

Hi,
I am a power user of Reminders (I have over 70 lists + average 10-40 items per list). I use it to access new and recurrent reminders typically via the TODAY list each day. I also use it to track items that I don't want to allocate a time to (such as Christmas shopping ideas throughout the year) but have the option to assign a day / time / priority / location / notes and recurrence if I need to. I use the Reminders to basically run my life.
I accidentally upgraded to IOS7 last year and found the 'new' version of Reminders actually provides less functionality than the old, not to mention the childish design and poor perfomance issues it created on my phone. In short, it no longer does the job.
For people who use the reminders for more than maybe 10 reminders in a day, the functionality is now useless. There was no calendar access to retrieve items pertaining to a specific day without having to scroll through (for me) hundreds of reminders - and I had no way to customise the view - aside from pick one childish colour over another childish colour. The interface 'feature' of different colours and different font sizes (dependent on the length of the reminder) makes it impossible to easily see items marked as priorities, when they are each due and when they became overdue. Against the white background, I could barely make out what the crayon colours were even saying.
Luckily for me, someone at Apple took the time to see how I was using Reminders and agreed that the 'new' version wasn't going to work - and they organised a new phone for me that still had the IOS6 version on it.
I'm now in the situation that I have tried and tested nearly every Task-related app available for iPhones. There is not one application that does everything that the IOS6 Reminders version does.
Assuming someone at Apple thinks they've done a really good job on the IOS7 version, I'm guessing they aren't about to lose face by reverting to the IOS6 version, so before I succumb to reverse-engineering the app and paying someone to build it the way it was ... I am hoping that Apple will have the courtesy of making the app available for download through the Apple Store. At least then it can enable it's loyal customers to benefit from core functionality that actually works as it was originally intended - and in the process, discourage those same customers from exploring alternate manufacturers as they are forced to upgrade from iPhone 4 / 4s / 5 / 5s / 5c.
Hopefully this will reach someone who is in some way, shape or form accountable for the Reminders App and is interested in user feedback.
Cheers

As I said ... I have downloaded every task manager - including Remember the Milk, Pocket Informant and Toodledo, as well as about 50 others - and none of them cover ALL of the functionality I need. They are NOT more designed for my type of use as they are time-centric rather than list-driven with a scheduling feature. I ALSO was a power user of Microsoft Outlook (prior to the iPhone even existing) as it was the only product capable of handling the categorisation, search and retrieve functions required to manage a significant number of tasks ... and even it doesn't handle the task management as effectively, simply and quickly as the IOS6 Reminders does. Hence, I moved all of my lists and schedules to Reminders so they were no longer calendar based and could take advantage of the iCloud back-ups + synchronisation across my mobile devices.
I'm not asking for suggestions on alternate products as I am capable of doing a 'search' on the App Store and even Google.
I am expecting that in the interests of improving their products based on their own community feedback, someone from Apple DOES at least monitor the discussions even if they aren't participating in them - and this is another portal to try and get them to see sense in making the previous functionality / look and feel / performance available as a download through the App Store. - and yes I would pay money for it.

ICloud Syncing issues on iOS7 on 5s?

Since switching over to iOS7 and an iPhone 5s I am having the following issues:
1. All my keyboard shortcuts (which sync using icloud) are gone.
2. I cannot see any of my icloud documents in Pages, Numbers or Keynote on my iPhone?
3. If I make any changes to iwork documents on my iPad they do not upload to iCloud.
4. When I try to login to iWork in the cloud it just takes me back to the login screen without logging me in. All other iCloud functions work fine.
Anyone else experiencing similar issues? Know of any fixes?

Exactly the same issues on my iPad2 although all my iCloud files are visilbe on my iMac. In addition, I've lost access to my files for PDFPen on my iPad.

IMAP issue on IOS7

When moving/managing mail on any one of my devices, the changes are not reflected on my other devices. e.g. move mail from my inbox to another folder.
The devices all point at the same IMAP account. The current functionality I am seeing defeats the purpose of IMAP given the devices are behaving as if they are on POP.
The devices are;
Iphone 5S
Ipad 3
Windows 8 PC, using outlook 365
Pre-IOS7 this worked and behaved as you would expect when using IMAP.   There have been no configuration changes to mail or mail setup on the IPhone, Ipad or Windows PC.   There have been no changes/upgrades to the IMAP server from when it was working on IOS6 to when it has now stopped working after the IO7 update.
Any ideas?   Anyone else experiencing similar issues?

Just in case your settings got mangled somehow in the upgrade, have you tried deleting and re-adding the mail account on your iPhone and your iPad?
Also, if your IMAP mail service provider offers webmail access, does the webmail portal show the same content as the Windows box, one of the iDevices, or neither?
FWIW, I am not seeing this problem on my iPhone 5 or my iPad 3. I hope this suggestion helps you regain functionality on your devices.

Surface Pro 2, Functionality Issues with Photoshop

I've been working with PS for years, and previously used a Cintiq, but i would like to branch out somewhat to a Surface Pro 2 by Microsoft. However, i've been having issues with the way the pen works and how the program reacts to swiping.
I would like to know if i can change the functionality of the button on the stylus on the Surface Pro, as i often have with my Cintiq tablet. Currently it pulls up the brush menu, when i would like it to function as an eraser.
Further, PS seems to react to any upward swipe from my finger by throwing the view of the canvas wildly to the upper corner, rather than a gentle scroll.

I've been working with PS for years, and previously used a Cintiq, but i would like to branch out somewhat to a Surface Pro 2 by Microsoft. However, i've been having issues with the way the pen works and how the program reacts to swiping.
I would like to know if i can change the functionality of the button on the stylus on the Surface Pro, as i often have with my Cintiq tablet. Currently it pulls up the brush menu, when i would like it to function as an eraser.
Further, PS seems to react to any upward swipe from my finger by throwing the view of the canvas wildly to the upper corner, rather than a gentle scroll.

SAP MII function issue in SAP MII 14.0

Hi,
Currently I was working on some content up gradation work in SAP MII 14.0 , but while working, I have got a strange think regarding SAP MII Functions. We have developed the same code in SAP MII 12.2 and faced the issue while migrating to 14.0. The issue is as follows,
The function we have used in 12.2 is getvalue(name) as in the below screenshot,
but while we have migrated to 14.0, then we saw the function has updated into getvalue(map, key) in 14.0
I have no idea why parameter of the existing function got updated, but the problem is if someone want to migrate the existing code from 12.2 to 14.0 using such of function then he/she can get a "Conversion Exception" and at that time it will become bit hectic to identify the issue and change the logic to handle this in all the places.
Regards,
Suman

Hello Suman,
I guess it is a bug in MII 14.0. The help doc has the getValue(name) still. However, the newer function is not present in the same. I guess it was not documented. I guess, the getValue(map, name) is a newer function which somehow replaced the older one.
I would suggest you to raise a support ticket. According to me, the getValue(name) and getValue(map, name), both should exist.
Regards,
Tufale Ashai.

HT4623 Wi-Fi issues on IOS7

I recently upgraded my iPod Touch to IOS7. I am having problems where some apps complain that I am not connected to wi-fi when indeed I can browse various web sites in Safari. I can purchase media via iTunes store. My stock symbols update just fine. The problem symptoms: The Music /Radio app tells me I am not connected to wi-fi. And a bigger issue for me is that I can no longer wi-fi connect music to play on my Bose Soundlink Air!. The control widget doesn't show up. Before the "upgrade" there would be a small arrow in Music to select what to use for output - iPod or Bose. If I power up my MacBook Pro and launch iTunes - it sees my Bose.
Help please!

Sweet, My IPhone & IPad work again. I was ready to throw both in the river!!! Called Apple and no help, told me to buy different speaker system or contact Bose. I can't believe "tech support" at Apple didn't know the "fix". I love my Bose and would have replaced my Apple products before replacing my Soundlink Air!!!! Big thank you to Shaeburks. I never knew that control panel was there.

Function issue: inconsistent datatypes?

Hi all.
I'm having an issue with a function that converts coordinates to a spatial data type.
My database version is:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Production
PL/SQL Release 11.2.0.2.0 - Production
CORE     11.2.0.2.0     Production
TNS for Linux: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production
Here's my package that I'm using
create or replace package make_geometry
as
            function get_geometry_from_coords (p_coords in clob )
          return sdo_geometry;
end;
create or replace package body make_geometry
as
          function get_geometry_from_coords (p_coords in clob)
          return sdo_geometry
          is
             v_geometry sdo_geometry;
          begin
             --with t as (select p_coords coords from dual)
          select MDSYS.SDO_GEOMETRY(2003,8307,NULL,MDSYS.SDO_ELEM_INFO_ARRAY(1,1003,1)
                              ,cast(multiset(
                                  select ordset
                                 from (
                                        select regexp_substr( regexp_replace(
                                                                            replace(p_coords,chr(10))
                                                                             ,' {1,}',',')
                                                              ,'[^,]+',1,level) ordset
                                              ,rownum rn
                                          from dual
                                                           connect by level <= length(regexp_replace(regexp_replace(
                                                                                               replace(p_coords,chr(10))
                                                                                               ,' {1,}',','),'[^,]+')) + 1
                                        where mod(rn,3) <> 0
                    ) as sdo_ordinate_array))
              into v_geometry
              from dual;
              return v_geometry;
          end;
end;
/basically, it takes a list of coordinates, in the following format:
with t as (select '130.88214073599997,-12.377589935499998,0 130.88189276799997,-12.378437734999997,0 130.88164895999998,-12.379271400499997,0 ' coords from dual)replaces the spaces with commas and splits the resultant string by comma, then removes the third coordinate in each set (sets delimited by spaces in above example) and converts the result to sdo_geometry type.
This logic is not where my problem is occurring
If I run the query found in the package separately, it works fine:
SQL> with t as (select '130.88214073599997,-12.377589935499998,0 130.88189276799997,-12.378437734999997,0 130.88164895999998,
-12.379271400499997,0 ' coords from dual)
2            select MDSYS.SDO_GEOMETRY(2003,8307,NULL,MDSYS.SDO_ELEM_INFO_ARRAY(1,1003,1)
3                                ,cast(multiset(
4                                    select ordset
5                                   from (
6                                          select regexp_substr( regexp_replace(
7                                                                              replace(coords,chr(10))
8                                                                               ,' {1,}',',')
9                                                                ,'[^,]+',1,level) ordset
10                                                ,rownum rn
11                                            from t
12                                                             connect by level <= length(regexp_replace(regexp_replace(
13                                                                                                 replace(coords,chr(10))
14                                                                                                 ,' {1,}',','),'[^,]+')) +
1
15                                                               )
16                                          where mod(rn,3) <> 0
17                      ) as sdo_ordinate_array))
18                from dual;
MDSYS.SDO_GEOMETRY(2003,8307,NULL,MDSYS.SDO_ELEM_INFO_ARRAY(1,1003,1),CAST(MULTISET(SELECTORDSETFROM(SELECTREGEXP_SUBSTR(REGE
XP_REPL
SDO_GEOMETRY(2003, 8307, NULL, SDO_ELEM_INFO_ARRAY(1, 1003, 1), SDO_ORDINATE_ARRAY(130.882141, -12.37759, 130.881893, -12.378
438, 13
0.881649, -12.379271, NULL))but if I call the function:
SQL> with t as (select '130.88214073599997,-12.377589935499998,0 130.88189276799997,-12.378
-12.379271400499997,0 ' coords from dual)
2 select make_geometry.get_geometry_from_coords(coords)
3    from t;
select make_geometry.get_geometry_from_coords(coords)
ERROR at line 2:
ORA-00932: inconsistent datatypes: expected NUMBER got CLOB
ORA-06512: at "HR.MAKE_GEOMETRY", line 13If I change the package to expect varchar2 the above example coordinate list works fine, but obviously that doesn't work when the coordinate list exceeds 4000 characters.
any thoughts?

not sure that is the problem:
SQL> create table foo (mr_clob clob);
Table created.
SQL>
SQL> insert into foo values ('testing'||chr(10)||'testing');
1 row created.
SQL>
SQL> select replace(mr_clob,chr(10),'blah') from foo;
REPLACE(MR_CLOB,CHR(10),'BLAH')
testingblahtesting
1 row selected.

Keyboard Functionality Issues in Finder (Mac OS X 10.5.4)

I've recently begun to experience loss of the functionality of my keyboard in Finder on my personal laptop and work computer whenever I have a Wacom tablet plugged in. Restarting and unplugging the tablet sometimes works, but only after the 2-3 try.
Basically, the modifier keys and Function keys continue to work and the middle portion of keyboard fails to respond whenever I try to type a letter or use the spacebar. For example, when I attempt to create a folder it's first untitled. Whenever I try to rename the folder I can highlight the text, I just can't rename the folder. The keys appropriate keys don't work. Now if I use a web browser (Safari 3.1.2) or any other application other than Finder the keyboard functionality returns. I am able to type and use the spacebar, as well as use the other keys. It's as if nothing is wrong.
Has anyone else experienced this issue?
I recently started to experience it on my work computer and wondered if it had something to do with a Wacom tablet being connected. It seemed whenever I left the tablet unplugged and restarted my Mac everything was normal. Only when the tablet is plugged in does the keyboard functionality loss bother me.
Thanks to any who can help.

Did ever you try the "Relaunch Finder" option in the force quit menu?

Jco Function issue : The initial password has expired (request a new one)

Hi Friends,
Could you please help me to resolve this issue. I am able to start my session using SAP Jco Start Action block. But while invoking the BAPI using
SAP JCo Function action block I am getting the below error. I am 100% sure that my credentials are correct. I am able to logon to ECC using SAP Front GUI.
I am using MII 14.0 patch SP4
Any help on this very much appreciated.
<Rowsets DateCreated="2014-07-22T12:33:49" EndDate="2014-07-22T12:33:49" StartDate="2014-07-22T12:33:49" Version="14.0 SP4 Patch 0 (Nov 22, 2013)">
<FatalError>JCOProxy error: Problem retrieving JCO.Function object: The initial password has expired (request a new one)</FatalError>
</Rowsets>]]
Thanks in advance
Shaji

Hi Friends,
This issue got resolved when I cleared the BAPI list cache at MII using below URL.
http://hostname:port/XMII/JCOProxy?Mode=Reset

Enable data paging with parameters count() on new php function issue (BUG?)

I've got my app prototyped quickly with the default settings in Flex Builder 4. Now I'm going back and adding/modifying features to polish the app off.
For this application I'm using PHP5 as the server side.
The data paging is really cool and simple to call using the default settings. However, I'm running into issues with customizing the data paging feature.
This is the default header of the php function that was created for me:
public function getTblbrowserrecord_paged($startIndex, $numItems){...}
Instead of dumping all data back to the function I want to be able to search on certain fields so I created a new function called:
getTblbrowserrecord_search_paged ($szName, $szIP, $szRule, $szURL, $szDateLow, $szDateHigh, $szCode, $startIndex, $numItems ) {...}
The new function is tested and operates as designed.
I set the input types of the variables and return type (Tblbrowserrecord[]) of the new function then went to enable data paging. The first screen came up and asked me for the key to use which I selected. The next screen came up and asked me for the number of records which I set to 100 then went to select the count operation.
I initially selected the automatically created count() function but it came up with the error " Count operation parameters should match the paged operation parameters list."
So I created another function to match the search function's parameter's list:
public function count_searched($szName, $szIP, $szRule, $szURL, $szDateLow, $szDateHigh, $szCode, $startIndex, $numItems) {...}
But I still ge the error "Count operation parameters should match the paged operation parameters list."
But they DO match. I looked at the default functions that were created by FB4 and noticed that the automatically generated function count() has no parameters and the paged function has the two functions $startIndex and $numItems which are not identical yet they work. I tried removing those two fields from the count function but got the same results.
What am I doing wrong?
Thanks!

Nevermind... For some reason my FB4 is not updating correctly. After removing the two control fields at the end of the list AND exiting the app/re-entering everything worked ok. I've been having this issue a lot lately and am thinking that is is a bug of some sort?

Functional Issues w/ IOS7

Similar Messages

Maybe you are looking for