Functional location for the respective material and equipment in a report

i want to show the functional location for the respective material and equipment in a report designed for plant maintenace module..how should i add a field in the report which already contains the order , material and equipment no ?..just have to add a field  functional location in that report. Can anyone plzz tellme from which table should i fetch the data .?

From EQUI get the recent/valid EQUZ record.
From EQUZ get the ILOA record.
ILOA holds the TPLNR for the equipment.
And from ILOA you can get IFLOT.
edit: just noticed you can use V_EQUI as well.
Edited by: Maen Anachronos on Nov 26, 2010 12:40 PM

Similar Messages

  • How do I change the default locations for the iTunes music and iPhone back-up folders?

    My computer's hard drive is partitioned, with one partition having all of the Windows system files, and the other having all of my documents, music, videos, etc.  When I installed iTunes, it automatically created its music and iPhone folders on the Windows partition.  I've been able to change the default save folders for other programs to the second partition, but I'm having troubles finding this option in iTunes (I even went back and re-installed it to see if I could find it that way, but no dice).  Is there a way to change the default folders for the iTunes library and iPhone files?  It takes up A LOT of space on my Windows partition, so it would be very great to get that moved over.
    Thanks!

    You can't selectively move individual folders withing the iTunes  folder, but you can move the entire folder to, say, an external dive. To delink the iTunes application to the new library location:
    Open iTunes while holding down the Option key (Mac) or Shift key (Windows).
    In the resulting dialog, click the Choose Library button.
    Select the iTunes folder you moved to the external hard drive.
    Click Choose (Mac OS X) or Open (Windows) and then choose the iTunes Library file inside .

  • Auto GR for the same material and with different routings to diff stor loc

    Hi All,
              I have a semi finished material having 2 different routings line 1 and line 2 and with respective 2 different storage locations but need to have Auto GR.

    I'm not sure what you are asking; to cause an operation to do auto GR, you need to choose the right operation control key. The auto GR is controlled via the operation control key.
    Then for the Slocs; on the production version (MRP 4 view) you have a field "receiving location". Maintain for each of the two versions the right location.
    Next, create a new production order, and choose one of the production versions. Release, and do CO11N for the operation with the auto GR control key. See that it is received in the desired Sloc..

  • Remove function location for equipment with status ESTO

    hello all,
    i want to remove function location for a given equipment,
    this i am doing it by BAPI_EQUIP_DISMANTLE,
    how ever i am unable to delete the function location for the equipment whose status is ESTO
    now my question is how do i remove function location for the equipment whose status is ESTO
    thanks in advance..

    Another option is Tcode BS22.
    Go to the Status I0184
    Here Double Click on the SysSt to reach this screen. Here in Business Transaction PM03 change the Radio button from Forbidden to Allowed as shown here.
    Confirm process implication won't be there.
    Jogeswara Rao K

  • How to create functional location for IE02

    hi all,
    can anyone please tell me that how to create functional location for IE02?
    Regards saurabh.

    To attach a functional location to an equipment, please make sure the following settings,
    1- You have defined the installation allowed at functional location for the following equipment category.
    2- Make sure status of your equipment is AVLB not ESTO.
    then Goto IE02 in the structure tab ---> click change installation location and install the functional location.
    Regards,
    EJ

  • Creating Materials for the Header items and component items

    Hi MM Experts,
    I am doing configuration for the KIT items Sales Processing.
    For that I need to create Materials for Header materials & component materials in MM01.
    I need few inputs regarding for this:
    What Material type ,I should give for the header material and component material in MM01?
    What Item category should used for these Header & components items in the Sales Order ?.
       I am using a Price at Header Level ,so will TAQ suffice me for the Header item ??
    Do i need to maintain separate condition records for the Header material and all the item materials in 
      VK11 ?
    Thanks for your answers in advance.
    Thanks and Regards,
    Umesh Karane.

    Hi
    Any material type... depending on your requirement Normally Finished product.
    Item category Normally use NORM, if u want to use third party slaes then use BANS
    Check it out
    Regards,
    Raman

  • Table link for the current and historical functional location for equipment

    Hi Gurus,
    Can anyone please tell me the table link to find the historical functional location details for an equipment and the current functional location of the equipment?
    Regards
    Anoop

    Dear,
    In Table view V_EQUI u can get the details of current and past FL for an equipment.
    Regards
    Sunil

  • Material document ,quantity and stock location for a given material

    hello all,
    i have a requirement like this.
    in the selection screen i have,
    material.....
    plant....
    posting document date.....
    i need to get material document number,quantity,units and stock location for the above mentioned selection criteria...
    what tables do i need to use..
    do i need to use any BAPI or Function module..
    thanks in advance...

    Hi Vinay ,
    Look into table MKPF & MSEG for material document
    anf for quantity in MARD
    Regards
    Yogendra Bhaskar

  • Projected Stock for a given Material and Location (System: SCM-APO)

    Hello Experts,
    Appreciate, if anybody can help me in getting a time-series key-figure data (Stock-On-Hand for a given Material and Location) for a given period.
    I am working on a report to display the projected stock (Material & Location are known) for a given period (1 month).
    I am able to view the above data in my planning book.
    Thanks in advance.
    Regards,
    Prasanna
    Edited by: Prasanna Gunji on Apr 9, 2010 3:42 PM

    Hi Prasanna,
    9ASOQMQTY - Stock in quality inspection
    9ASOTRSQTY - Stock in transit
    9AAVLSTCK - Projected Stock
    Hope this helps
    Regards
    R. Senthil Mareeswaran.

  • Where and how to find the storage locatation for the consignment stock

    where and how to find the storage locatation for the consignment stock (customer stock )  for more than one storage location .
    table :msku
    material no    -   werks - batch
    xxx                   sg11  - 200352ac
    table : mchb
    material no    -   werks  -lgort - batch
    xxx                   sg11   sg10   200352ac
    xxx                   sg11   gs11   200352ac
    note : each stock location having same batch no in different storage and my question how to find which link for msku to mchb .

    Hi,
    Try the table MARD: Storage Location Data for Material, where in the field LABST will give the stock field, against a given material/plant/Storage Loc.
    Regards,
    JLN

  • Need to set default values for the fields plant and location in ME21N

    Hi All,
    i need to set default values for the fields plant and location in ME21N tcode.
    In accout assignment if we give 'A' then we need to create asset by clicking the Asset tab,there you have the fields plant and location.
    How to resolve this?
    Thanks in Advance

    hi .
    i needed to set default strorage location and plant in personal setting  in me21n.
    i solve it with this way.
    go to program SAPLMEPERS in se38.
    create new function in output with the sample name :MODULE ZTEST_001 OUTPUT.
    in this module write:
    if MEPOITEM_PROP-WERKS is INITIAL and  MEPOITEM_PROP-LGORT is INITIAL.
    MEPOITEM_PROP-WERKS = '1000'.
    MEPOITEM_PROP-LGORT = '0032'.
    endif.
    this is the solution.
    best regards.
    maryam

  • Exclude QM lot stock for a perticular material and location for PPDS run

    Hi Experts,
    I would like to exclude QM lot stock for a perticular material and location for PPDS run. I have unchecked stock in quality inspection under productmaster/ Demand / availability stock in APO, but still QM lot is appearing in RRP3 view and considering for PPDS heuristic run.
    Can you plesae explain how to exclude QM lot for a PPDS run.
    --Kishore

    Hi Kishore,
    Some companies do not activate the iModel for Inspection Lots and manage the Inspection Lots as Quality Inspection Stock. For example this how it looks an Inspection Lot in RRP3 if you manage the Inpsection Lots as Stock in Quality Inspection:
    Because you are using the iModel transferring Inspection Lots as QM Lots, you can not use the Stock in Quality.
    You can read about it in the help of the field Inspection Lots in CFM1. This is the help:
    Inspection Lots in Integration Model
    You use this indicator to activate the transfer to SAP APO of inspection lots
    that are relevant to stock.
    Dependencies
    You can only activate an integration model for inspection lots if you have
    set in CIF Customizing that inspection lots should be transferred for materials
    relevant to inspection lots instead of qualitiy inspection stock.
    If the inspection lots in SAP APO are to contain the characteristic value
    assignements of the batches assigned to them, you have to transfer the
    characteristic value assignments to SAP APO before activating the integration
    model for inspection lots. You can do this by activating an integration model
    for stock.
    Hope this clairy your doubt.
    Kind Regards,
    Mariano

  • Just downloaded Firefox 4. Running Windows XP. Some of the new features are mising such as the new "Firefox Button" and the new location for the bookmarks button. The look is almost like Firefox 3. Why is this happening?

    Hi. I just downloaded Firefox 4. Some of the new features are missing such as the new "Firefox Button" and the new location for the bookmarks button. It almost looks just like Firefox 3. I am using Windows XP on this desktop computer. On my laptop, running Windows Vista, Firefox 4 has all the updates advertised. Why is this happening? How do I fix?
    Thanks
    Jamie

    Thanks so much!

  • HT201250 I am having trouble setting up my time capsule.  the amber light is flashing.  i have a Verizon FIOS network that i use for the internet (WiFi) and do not want to configure the Time Capsule to do that function.  I just want the Time Capsule to ba

    I am having trouble setting up my time capsule.  the amber light is flashing.  i have a Verizon FIOS network that i use for the internet (WiFi) and do not want to configure the Time Capsule to do that function.  I just want the Time Capsule to back up.

    Simple.. bridge the TC.. in the apple utility in the NAT and DHCP area.
    Plug it into the FIOS router.. you can turn off wireless in the TC if you want.. or use it.. it can work faster if you are nearby and can select 5ghz.. but up to you.

  • Excisable and Non Excisable plants for the same customer and same material

    Hi All,
    We have a customer who purchases the SAME goods from two different plants, one plant is Excisable and another plant is Non Excisable. So sales area of the customer is same for both the plants. When customer buys from Excisable plant Excise Duties should applicable and when the same customer buys from Non Excisable plant Excise Duties should not be applicable. If I maintain the Excise indicator as 1 in customer's J1ID then Excise Duties are applicable for the customer from wherever he buys the goods.(If he buys the goods from Excisable and Non Excisable plants Excise Duties are flowing).
    So, my query is: if the customer buys from non-Excisable plant, Excise Duties should not flow.
    So I am planning to create a new sales org for Non Excisable plant, then the sales area of the customer will change.
    Is there any other way to over come this issue? Plz guide me.
    Thanx&Regards,
    RAMU

    Dear Ramu
    My suggestion is creating a new sales organization is not  required just to fulfill this excise requirement.
    Let us assume you have two plants
    -  1000 is excisable and
    -  2000 is non excisable
    for material ABC
    Now go to J1ID, select the tab "Material and Chapter ID combination"  and maintain the excise tax indicator for plant 1000 only.
    By doing so, while creating sale order, you input the delivering plant and based on the settings you maintained in J1ID, excise duty will be determined in that sale order.
    thanks
    G. Lakshmipathi

Maybe you are looking for