Functional Location Position
It's my understanding that under the Structure tab on a Functional Location is a position field that will "order" all the functional locations under a superior functional location. However, I can't get it to work.
I have twelve functional locations tied to a superior functional location and gave each one a number in the position field 1 through 12. However, when I use the Structure list (IH01) to display the superior location, the functional locations below it do not appear in the order that I put in their position fields. What am I missing?
Hi,
The position field is alphanumeric so your 12 will appear before 3,4,5, etc.
Use suggestion above.
-Paul
Similar Messages
-
Update Measurement Points on Functional Locations
Hello Experts,
I need create a custom program to update (add/delete/change) the measurement point's POSITIONS on functional locations. Basically the users want to clean up the functional locations which have some wrong data in them. Since I am very new to this functionality area, Can anybody please let me know - Is there a FM/Bapi to update the Measurement Point Positions on Functional Locations?
I appreciate your help.
Thanks.
Edited by: sey ni on Mar 7, 2011 4:49 PMI think I will have to write a BDC on IK01/IK02 transactions. Not sure, if we have a better solution.
-
Equipment Hirarchy with functional location
Hi, I am trying for Equipment Hirarchy in functional location. I have one main equipment and 4 sub equipment of same type. I want to give specific description each sub equipment.Everytime when I dismantle and install this sub equipment, I want the description and position remains unchanged. How can it be done.
I will be dismantling the defective equipment and installing new equipment. I will the assign same position number to the new equipment. Here I want to give a name to the position number. example "Cylinder Position 1". So whenever I dismantle and new equipment to that position, I should get the position description automatically.
-
Log action - Functional Locations (PM)
hi everybody,
I want to view the action log and the changes of a functional location or an equipment in SAP PM, but when i go to Extras - Action Log or Extras - Display Changes, appears the message:
No change document positions found
Message no. CD649
Diagnosis
No change document item was found which satisfies the selection conditions.
Procedure
Pleas check the specified selection conditions.
Maybe i have to activate something.
Please help!Hi anali.cm
Please note that the following are not recorded as part of change documents for equipments:
Status changes
EQBS data changes
You can view status changes if instead you use the status history or
the application log.
If the changes you make to the equipment are to the status or to a field in the table EQBS then this could be the reason
why you get the 'No change document positions found' CD649 message.
Theirs no customizing that i know of to influence this ...
Thanks -
Enda. -
Hi gurus,
How can i track the changes made in my functional location? when i go to extras> display changes> it says " no change document positions found"
Thank you!Hi,
Go the spro path
Master Data in Plant Maintenance and Customer Service ->> Technical Objects -->>Functional Locations ->>Define Category of Functional Location . select your functional location category
Check whether you have selected the check box for the change documents.
DP -
Help - Class name and descriptions for a function location.
Hi Guys
i have to write a report that displays the class and class descriptions for a function location. the user passes in either the function location(TPLNR) or the class name and the report should display the the class characteristics and resp. values. Is there a FM that i coud use?
please help.
many thanks.
seelan.sadiepu1 wrote:
When I set up Words with Friends on my Fire it asked for my username and password which from a previous reply to my inquiry above stated that the S 3 doesn't store due to privacy issues. I have tried all my usual combinations of usernames and passwords and my Fire won't let me access the game as it keeps telling me that one or the other is not correct. I have deleted the app from my Fire and re-downloaded it but have the same error comes up. I have accessed the Words with Friends support both on my phone and their website but there is no live chat. I might have to take both to a Verizon store. Also, my Fire won't let me access the game without a correct username and password. To say that I am frustrated would be an understatement as well I have tried everything I can think of with no luck! Thanks for any help you can give!
Did you use facebook to log in?
Verizon will not be able to help you retrieve any of the information you need. You will have to contact Zynga. -
Do you know the link between the sales order item and functional location ?
How know the functional location if I know de sales order number and item ?
Wich table or bapi ?
Tks.Hi,
I think there's all details in my question.
You answer is right only if I need to know the functional location at AUFNR level.
Is not my case, I need this information at sales order level.
Regards,
Roberto. -
Help required: class assignment and values for functional location
Hi All,
My requirement is to get classification data for a functional location as in IL03.
Can any one let me know where in the standard program are they getting the assigned classes
and class values. So that I can use the same logic.
Thanks.FM BAPI_OBJCL_GETDETAIL
OBJECTKEY ?0100000000000011643
OBJECTTABLE IFLOT
CLASSNUM ZPMI_BLDG
CLASSTYPE 003
KEYDATE 29.07.2009
UNVALUATED_CHARS
LANGUAGE EN
Cheers! -
Required to get class Charateristics and values for an functional location
Hi ,
As per the requirement ,i have to read the class characteristics and the corresponding values for an function location.I have functional location number ,and the various class names associated with fn.location. Any pointers would be helpful
Regards
Arun TFM BAPI_OBJCL_GETDETAIL
OBJECTKEY ?0100000000000011643
OBJECTTABLE IFLOT
CLASSNUM ZPMI_BLDG
CLASSTYPE 003
KEYDATE 29.07.2009
UNVALUATED_CHARS
LANGUAGE EN
Cheers! -
FM for characterstic value of a function location (asset)
Hi All,
Can any one please tell me the FM module to be used for finding the characterstic value for a given characterisctic name of a function location in IL03 (classification).
I have tried using BAPI_CLASS_GET_CHARACTERISTICS, but it is not yielding the desired results.
Thanks in advance
DeeptiHi,
I don't know why you are not getting the proper reult.
BAPI_OBJCL_GETDETAIL iis uesd to get both character and numeric values back form the classes.
Check this:
LV_OBJECT = I_TPLNR.
CALL FUNCTION 'BAPI_OBJCL_GETDETAIL'
EXPORTING
OBJECTKEY = LV_OBJECT
OBJECTTABLE = 'IFLOT'
CLASSNUM = 'Z_DEPOT'
CLASSTYPE = '003'
TABLES
ALLOCVALUESNUM = WT_ALLOCVALUESNUM
ALLOCVALUESCHAR = WT_ALLOCVALUESCHAR
ALLOCVALUESCURR = WT_ALLOCVALUESCURR
RETURN = IT_RETURN.
Furthermore i have a list of BAPI. [Try this link|http://www.saptechies.com/sap-bapi-list/].
May it helps you.
Regards.
DS. -
How to use BAPI_HELPVALUES_GET with functional location
I try to create an RFC connection searchhelp for my ECC system to the functional location table.
I thought of using the bapi_helpvalues_get but I get stuck in determing the right input data
I have found the right objectype in SWOI
BUS0010
now I found out thanks to see where the function was used and how it was filled in with which values
OBJTYPE BUS0010
OBJNAME FUNCTIONALLOCATION
METHOD GETLIST
PARAMETER FUNCLOC_LIST
FIELD FUNCTLOCATION
but still I get an error
ES&003Parameter FUNCLOC_LIST voor objectmethode BUS0010.GETLIST not available
what do I miss here ??
and If abnybody nows how I can build a searchhelp with just a searchhelp exit without a view to search for values it will also solve my problem in creating a searchhelp with data from another system which I have to retrieve by RFC
kind regards
arthurBAPI_PTIMEOVERVIEW_GET
Just pass in the a From date and To date, and then in tables, pass in a employee no, in EMPLOYEES field.thats all, execute. Any prompts you get to enter a value for anything just click save without entering any values. You will get data returned in Result table of TIMEOVERVIEW.
You can find the Documentation of this, when you go into display mode of this Bapi, you will find function module documentation on top right hand side of the screen. in any case i am pasting it below.
Functionality
This method defines a time data overview for employees.
The time data determined can be used as a value guide for recording in
another system (such as in a time sheet or an external system).
Notes
An "asynchronous access" to R/3 Time Management data determined by the
method PTimeOverview.Replicate specifies the employees for whom a time
data overview is to be created.
A "sysnchronous access" to R/3 Time Management data determined by the
time period entered and the external application specifies the employees
for whom a time data overview is to be created.
The employees selected are returned in the EMPLOYEES parameter. A list
of the time types for these employees also to be included in the
overview is returned in the TIMETYPES parameter.
The time data overviews are returned in the TIMEOVERVIEW parameter.
The selected time types and the applicable number of hours are returned
in the TIMETYPEVALUES parameter.
The overviews are transferred to the other systems by the method
PTimeOverview.SaveReplica.
Parameters
FROMDATE
TODATE
EXTAPPLICATION
EMPLOYEES
TIMETYPES
TIMEOVERVIEW
TIMETYPEVALUES
RETURN
Exceptions -
Runtime error while opening stucture tab in Functional Location..
Dear All,
Whenever I'm trying to open the structure tab of functional location I'm getting the runtime error and the message is as follws..
Run time error TIME_OUT
Time Limit Exceeded
The program " SAPLIE01" has exceeded the maximum permitted runtime without interruption and has therefore been terminated
Error Analysis
After specific time,the program is terminated to make the work area available to other users who may be waiting
I did not understand the reason for it....
Any can throw light on this...
Thanks in Advance
JohnsonDear
This problem is occuring due to your transactions has so many datas in output. So that system is providing the error. In each sap log in you can control the maximum idle hours at Option header menu at Main menu.
Else you get the Abaper+Basis for the help. There is no error in functional side for sort out. -
Dear Experts,
I am uploading the master data of functional location through LSMW .I had completed all the steps except "Run Batch Input Session".
In that step it is showing as functional location already exists, after this error the remaining functional locations are updated in sap or it will stop total transaction by this error???
how can u upload the remaining in to sap by skipping already existed one????
here I am uploading the error screen shot.
Thanks & Regards,
Sunil BoyaHi Jogeswara Rao Kavala,
When I am pressing back or NO option it is showing error like this
What is this OK- Code means?
how can I resume this process, even it was not going to back screen also and only one option is available for exit from this is by going into MENU-SYSTEM-SERVICES-BATCH INPUT-CANCEL.
Sunil Boya -
Error while updating the classification in functional location
HI
I'm adding the classification to the fuctional location, When i save the functional location it is poping me this information.
User exit ZXCLFU02: Run program RCCLUKA2 to activate table INOB
When i run this program RCCLUKA2 tried to run as per the information provided in the Help.
When i execute this program for class type 003-Functional location i dont get any results.
still the problem persisit, If any one has come across this problem please let me know to solve this issue.
Thanks
Abdul MujeebHi Pete
The message appears like this
User exit ZXCLFU02: Run program RCCLUKA2 to activate table INOB
Message no. YMD01 000
Thanks & regards,
Mujeeb -
Creation of Work ceter based on Functional Location.
Hi all, Greetings.
I have a query regarding creation of work center in PM. i m new to this module and this is my first implementation.
The scenario is as follows.
Here there is one Plant and which i will be considering as maintenance plant as well as maintenance planning plant. i m planning to classify the technical objects based on both Functional location as well as Equipments. there are 8 functional locations and almost 10 to 20 equipments under each functional location. Can i create work center based on functional location if so i will have to create 8 work center or can i create 3 or 4 and consider 1 work center for 2 or 3 functional locations.
please help me on the same and correct me if i am wrong. i have no much knowledge on the same.
Thanks in Advance.Hi,
Thanks Seenu,
So i have to clasify based on Maintenance activity types. If there are activities like repair, shutdown, testing etc. then i will have to create work center based on that?
So i can create some activities like, Modification, Repair, standby, waiting etc and assign work center for each?
Here we are following 4 maintenance planning preventive, predictive, breakdown & shutdown so is it possible to make 4 work center according to those.
please correct me if i m wrong. i really have no much idea in this. any help or suggestions will be appreciated.
Thanks in advance
Ramya
Maybe you are looking for
-
Adobe Air will not download. Installation log & windows log below. Any ideas?
Installion log as follows (followed by windows installer log ):- [2010-06-15:19:04:42] Performing runtime update [2010-06-15:19:04:42] UI SWF load is complete [2010-06-15:19:04:43] UI initialized [2010-06-15:19:04:43] starting user confirmation [2010
-
Flex 4 Spark controls text not displaying correctly on Solaris 10
For some reason Spark controls won't render text correctly on our sparc Solaris 10 worstation. As you can see the Cancel button and the "HELLO" label are mx controls. The rest are spark controls and only display a square with an x inside, Any ideas
-
OWB 9.2: Active Job Does not Exist !
OWB:9.2.0.2.8 I have opened a TAR for this, not much headway so far Error Message: ORA-20211: Active job does not exist, cannot link to job record. Here is the sequence of events 1) A test database was cloned fom production 2) We were able to to get
-
The Itunes store constantly asks me to Improve Apple ID Security by adding three secret questions but won't accept my valid password. I have tried to reset the password, update the billing info and it still won't let me make any purchases.
-
HT2534 It's not showing a none option
It's not showing a none option on my phone plz help