Functional module for determining the sales tax code

Dear all,
Kindly help me is there any Functional module to determine the sales tax code?
My Requirement is Based on the Country, Sales Org and Tax code Pricing should pick up automatically.
I tried adding the same fields in the table and inserted in the access sequence and created the condition record for the same.
Created the order but system is not able to get the Tax code while determining the price?
Please help ...
Regards,
SK

My Requirement is Based on the Country, Sales Org and
Tax code Pricing should pick up automatically
but system is not able to get the Tax code while determining the price?
Your both the above comments are contradict to each other. In the first statement, you say pricing should pick up automatically whereas, in the next statement, you say tax code is not determining. Please indicate the requirement clearly.
thanks
G. Lakshmipathi

Similar Messages

Standard function module for checking the sales organization and plant

Hi all,
    Does have standard function module for checking the relationship between sales organization and plant?
Thanks a lot!
Nina

hi
good
check these BAPIS
BAPI_SALESGROUP_GET_DETAIL     Sales Group: Display Name
BAPI_SALESOFFICE_GET_DETAIL    Sales Office: Display Name
BAPI_SALESOFFICE_GRP_EXIST     Sales Office / Sales Group: Existence Check
BAPI_SALESORG_EXIST            Sales Organization: Existence Check
BAPI_SALESORG_GET_DETAIL       Sales Organization: Display Data
BAPI_SALESORG_OFFICE_EXIST     Sales Organization / Sales Office: Existence Check
PLANT=>
BAPI_PROMO_GETSITEPLANNING     Detailed Data for the Plants Involved in a Promotion
thanks
mrutyun^

Function Module for getting the Sales Price for a condition type

Hi,
I am looking for a standard function module to which I can pass my condition type(new customizing) and it will return the sales price. The customer is going to create some new condition type to manitain the sales price. I'll have the necessary information like material/sales org/distribution channel, customer and need the standard function module to read the condition records for that condition type(as configured) and give me the price. PLease help if you know of a standard function module performing this.
Thanks in advance.
Regards
Malthi

Hi malthi ,
welcome to sdn
for material sales area u can look for the validations is table MVKE.
the classification of the conditions is in tables like A901, a902 etc which in my opinion holds the condition types per classification .
put a A* in se11 and this will give the list of tables per classification .
u need to get the conditions as per kschl and dmbtr and
etc..
like this ..
Get Condition Values for Material/Plant combination
IF NOT i_a916[] IS INITIAL.
    SELECT knumh kappl kschl krech
           kbetr konwa kpein kmein
           INTO TABLE i_konp
           FROM konp
           FOR ALL ENTRIES IN i_a916
           WHERE knumh EQ i_a916-knumh AND
                 kappl EQ i_a916-kappl AND
                 kschl EQ i_a916-kschl AND
                 loevm_ko NE 'X'.
ENDIF.
Get Condition Values for Material/Plant/Ordertype/
Customer combination
IF NOT i_a925[] IS INITIAL.
    SELECT knumh kappl kschl krech
           kbetr konwa kpein kmein
           APPENDING TABLE i_konp
           FROM konp
           FOR ALL ENTRIES IN i_a925
           WHERE knumh EQ i_a925-knumh AND
                 kappl EQ i_a925-kappl AND
                 kschl EQ i_a925-kschl AND
                 loevm_ko NE 'X'.
ENDIF.
just check this Fm if u can apply ur condition over here ..
ME_GET_PRICE_CONDITION
regards,
VIjay.

Reg: function module to fetch the overall taxs for a sales order

Hi Experts,
I need a fuction module which fetches all the taxes for a sales order with the tax values.
(i.e) i need a function module with displays the overall tax values and not line itemwise..
Regards,
Vikram.S

Hi,
Check if it works
POS_SALES_DOCUMENT_HEAD_TAXES

Function module to determine the date for the nth weekday of the mth month

Hey folks,
Is there a function module which determines the date for the mth weekday of the nth month in the pth year.
For instance, if I input 2nd thursday of the 4th month in 2008, it should return me, 04/10/2008 (MM/DD/YYYY).
Thanks and Best Regards,
Puja.

Hi Ravi,
Hadn't been able to work on this lately...You solution was quite close, but did not work for a few scenarios....I tweaked the logic a bit to take care of them as well...
So here goes the code:
================================================
DATA first_day_of_month TYPE datum.
DATA day TYPE p.
CONCATENATE year month '01' INTO first_day_of_month.
CALL FUNCTION 'DAY_IN_WEEK'
    EXPORTING
      datum = first_day_of_month
    IMPORTING
      wotnr = day.
DATA day_number TYPE numc2.
IF day = weekday.
    IF recur = 1.
      DATA ls_date(10) TYPE c.
      CONCATENATE month '/01/' year INTO ls_date.
      CALL FUNCTION 'CONVERT_DATE_TO_INTERNAL'
        EXPORTING
          date_external                  = ls_date
       IMPORTING
         date_internal                  = date.
    ELSE.
      day_number = ( ( recur - 1 ) * 7 ) + 1.
    ENDIF.
ELSEIF day < weekday.
    day_number = ( ( recur - 1 ) * 7 ) + ( weekday - day ) + 1.
ELSE.
    day_number = ( ( recur - 1 ) * 7 ) + ( 7 - day ) + weekday + 1.
ENDIF.
IF date IS INITIAL.
    CONCATENATE year month day_number INTO date.
ENDIF.
====================================
There still could be some loopholes in this....am not sure....but it sure did seem to work for a couple of random checks that I performed.
Brownie points to you for giving me a direction.
Thanks,
Puja.

Routines for determine the customer tax classification in VF02

Hi
i have to find out how the customer tax classification values is coming in VF02.customer tax classification value should be '0'.but in my case it is coming '1'.
i have to find out ,how the calculations has to be done and where should i modify the value.it is an production support issue.
Please guide me .what are the possible ways to fix the issue.
Regards,
Kiran

I'm assuming that, the country is India and based on its requirement:
Sales tax is a state government revenue. There are two types of sales taxes, Local sales tax & central sales tax. Local sales tax is intra state whereas CST is inter state.
Example of LST : Point of sale i.e. delivering plant & ship to party are within the same state. The rates are defined by the respective state governments.
Example of CST : The Delivering plant & Ship to party geographic locations are 2 different states. At the point of sales from one state, the ST goes to that state govt. & consignment is despatched to the Ship to party. Once that consignment is received at the ship to party state, sales tax will be levied once the sales is registered there. For this case, the LST that is applicable by the Ship to party further will not be applicable in all probability to be captured in SAP.
Stock transfer : This does not attract any sales tax. The consignment is transferred from one D plant to another D plant irrespective of inter/intra state sales. The invoice that is accompanied with the consignment thus shall not have any final value. It's a zero value invoice, but the basic prices needed to be mentioned.
The selling organisations normally needs to register with the sales tax authority of the respective state to have a warehouse or D plant to avoid the double taxation for their dealers/distributors.
Now, the pricing procedure that is there in 4.7 is Factory sale with formula-JFACT, in which the CST condition type is JIN1 & the LST is probably JIN2. There may be surcharge cond types as well which will calculate the amount on either JIN1 or JIN2.
For config :
1.SPRO > S&D > Basic fn. > Pricing > Pricing control > Define & assign Pric. procedure > Maintain Pric proc.
2. The tax rates are normally driven from the Tax classification of Customer & Material access. To do this config, S&D >Basic fn. > Taxes. You need to include the condition type for country IN in 'Define tax determin rule'.
3. Same path : But go to Tax relevancy of master records where you configure the condition type & options of rates that will flow to these masters. One needs to understand here properly as u need to have unique combinations for picking the sales tax rates. I will try to demonstrate the smallest example. Let's say, the LST rates are 2%,4% & 0%. I will have two options for material master here. 1 for taxable & 2 for not taxable.
For customer master, I will have 1-LST 2%, 2-LST4% & 3-LST0%. When I create master records for LST thru VK11 for JIN2, I will chose the access where the combinations of customer & material tax classifications are available. If this access does not exist create it under an access sequence. But normally this is standard. The condition records will look like,
Cust-Tax classi.          Material tax claasi.        Rate           Tax code
        1                                    1                         2%               A1
        2                                    1                         4%               A1
        3                                    1                         0%               A1
Remember, rates are flown from the tax codes. Tax codes can be created thru T code FTXP. This is normally a FI job.
Hope this info helps
Regards
Manthan.

Creation of function module for updating the ztable

Hi,
I am sending the requirement for ceation of function module for updating the ztable.
Requirement----
Table Updation rule (New record)
While creating a new record the calling function will export the following to the table handling function.
Table field     Probable Values
ZORDERNO------->     Sales Delivery no in case of sales orderShipment no in case of transfer order
UNAME----
>     User ID
ZORDTYPE----
>     SALEOR in case of sales orderTRANSF in case of transfer order
ZREFDOCNO----
>Sales Order no in case of sales orderPurchase Order no in case of transfer order
ZREFDOCNO1----
>Delivery no in case of transfer order
The table handling function will calculate the following fields
Table field     Probable Values
ZREQNO----
>Running serial number (incremented by 1 for each new record)
ZREQDAT     -
>System date
ZREQTIME----
>     System time
ZSTATUS----
>OPEN (for all new records)
Before inserting a new record the table handling function will always check if a previous record exists for the same order / shipment no. if record exists the function will not insert a new record.
Table Updation rule (Status Update)
While updating a record the calling function will export the following to the table handling function.
Table field     Probable Values
ZORDERNO----
>Sales order no in case of sales orderShipment no in case of transfer order
ZSTATUS----
>CANCEL if cancellation successfulERROR if cancellation not possible (order already processed)
The table handling function will calculate the following fields
Table field     Probable Values
ZSTATDAT----
>System date
ZSTATTIME----
>     System time

Do you have to create/update new record in Ztable through Function Module ?
or you need to write FM only for validation?
Any how, you need to create a Program with Input values for the fields of Ztable, and for rest of fields the Value can be calculated based on input as per your requirement.
Let me know clearly what exactly u need ?
Regards,
Kiran

Function module to determine the credit balance or if there is an open ite

Hi All ,
Can anyone please let me is there any function module to determine the credit balance orr if there is an open standing request / open standing request /paid but not yet refunded security deposit .
Requirement :
Purpose -This report shows a list of u201Cinactiveu201D contract accounts and the amounts to be refunded (credit balance, paid security deposit) to customers. This report also shows any open standing requests in customersu2019 contract accounts.
Note: SAP does not have a concept of u201Cinactiveu201D contract accounts. All contract accounts are active in SAP.
We do have customers who pay several months in advance (when they are out of town and donu2019t want to have their services disconnected).
Logic to retrieve the u201Cinactiveu201D accounts:
The inactive accounts can be identified by the Move-In/Out dunning procedure. If the mov-in/out dunning procedure is not empty, that means this account has moved out and the account is inactive.
Business Logic and Flow
For each contract account
Go through each installation and check if it is disconnected
     If (one is active)
move to the next contract account
else (all is disconnected)
     check to see if there is a credit balance or if there is an open standing request
     If (credit balance)
{Display contract account, customer number and information, and credit balance for refund}
If (open standing request)
{Display contract account, customer number and information, standing request number to be closed}
If (paid but not yet refunded security deposit)
{Display contract account, customer number and information, current balance and security deposit amount}
Thanks in advance
Rahul

Hi Rahul,
To find out the credit balance relating to security deposits you can use BAPI_ACCOUNT_GETBALANCES. On execution of this BAPI with BP and Contract Account Number, it will return the net balance with different segments like open, due, credit and likewise security deposit amount.
To find out if there is any open standing request standing against the customer you can use BAPI_CTRACCONTRACTACCOUNT_GOI. You have to execute this BAPI by providing BP or Contract Account number in Main Selections table and Main and Sub Transaction of Security Deposit Request transaction in Value Selection table. This BAPI will fetch all open items with the main and sub transactions specified and display.
Thanks
Ganesh

Function Module to update the sales order header status

Hi,
I am looking for a function module to update the Sales order header status.
Pls. let me know if anybody has used any FM to update the SO status.
Thanks,

By mentioning status do you mean Object status or Document status??
For Object status you may use FM: STATUS_MAINTAIN
For document status it changes according to flow.
Regards
Eswar

Function module for converting the foreign currency to words

hi,
can anybody tell me about the function module for converting the foreign currency to words format.
Like 25.50 USD
should be "Twenty Five Dollar & Fifty Sents."
foreign currency can be anyone like USD, JPY, EUR etc.
Regards
Nitin Varshney

Hi,
Try using the FM SPELL_AMOUNT
Check this wiki
[SPELL_AMOUNT|https://wiki.sdn.sap.com/wiki/display/Snippets/SpelltheAmountenteredin+words]
Regards
Sarves

Function Module to determine the number of pages in a pdf file

Hi All,
Is there any standard function module to determine the number of pages in a pdf file?
Thanks,
Sai

Hi unk2,
There's no functionality in the Acrobat.com online services to do a character count. But, you could use ExportPDF to convert your PDF file to Word format, and then do your character count in Word.
Please let us know if you need additional assistance.
Best,
Sara

Function module for displaying the location

Hi,
      Could anyone tell the Function module for displaying the location in our system without a file name while downloading, when the user press f4.
thanks

* read the default pathname on application server
call function 'FILE_GET_NAME'
       exporting
*           CLIENT                  = SY-MANDT
            logical_filename        = lc_logical_filename_ftappl
            operating_system        = sy-opsys
*           parameter_1             = ' '
*           PARAMETER_2             = ' '
*           USE_PRESENTATION_SERVER = ' '
*           WITH_FILE_EXTENSION     = ' '
*           USE_BUFFER              = ' '
       importing
            emergency_flag          = l_emergency_flag
            file_format             = l_file_format
            file_name               = l_file_name_ftappl
       exceptions
            file_not_found          = 1
            others                  = 2.

Function Module for Posting the Delivery Doument

Dear Experts,
Could you please send me the Function Module for Posting the Delivery Doument.
Thanks & Regards,
Ashok.

Hi,
What do you mean by POSTING the delivery document?
Are you mentioning the creation of Goods Issue?

Function Modules for uploading the file

Hi experts ,
I have a requirement to download a file (csv) from my local sytem (say desktop) into an internal table first and then update the contents of the same internal table into the database table.
Can anybody provide me with a sample program for doing the same or at least the name of function modules for the same.
Prompt replies will be rewarded.
TIA
Abhishek

Hi Abhishek,
How to use INSERT Statement..
Check this Sample Program..
TABLES:MARA.
DATA:ITAB LIKE MARA OCCURS 0 WITH HEADER LINE.
START-OF-SELECTION.
ITAB-MATNR = '123ABCDA'. .
ITAB-MBRSH = 'C'.
ITAB-MTART = 'FERT' .
ITAB-MEINS = 'KG' .
APPEND ITAB.
ITAB-MATNR = '123ABCDB'. .
ITAB-MBRSH = 'C'.
ITAB-MTART = 'FERT' .
ITAB-MEINS = 'KG' .
APPEND ITAB.
LOOP AT ITAB.
INSERT MARA FROM ITAB.
MODIFY MARA .
ENDLOOP.

Function module for getting the all PO waiting for release

Hi,
Is there any standard Function module for gettting all the PO's which all waiting for release.
Regards
Bala.

hi Bala,
ECC 6.0 Exits for VA01
go through the above link i think that will help u...
Regards,
sindhu.

Functional module for determining the sales tax code

Similar Messages

Maybe you are looking for