Functional Module required for getting list of successful jobs

Hi All,
There is one function module BP_JOB_SELECT which gives me name of unsuccessful job. Now I want to find the name of all successful job. Can anyone please tell me the function module name for that?
Thanks in advance,
Siddarth.

You can use the same FM - BP_SELECT_JOB.
While filling structure JOBSEL_PARAM_IN, you can pass FINISHED = 'X' and
SCHEDUL = ' '
READY     = ' '
RUNNING  = ' '
ABORTED = ' '
Regards,
Mohaiyuddin

Similar Messages

  • Function Module required for getting Value Range data

    I need a function module where in i can get the data from a value range in a domain.
    Message was edited by:
            Gurpreet Singh

    Hi,
    You can use this code to get the Doman's fixed values.
    DATA:  lt_fixed_values     TYPE ddfixvalues,
      CALL METHOD cl_abap_typedescr=>describe_by_name
        EXPORTING
          p_data      = 'Domain_name' " Pass the domain name here
        RECEIVING
          p_descr_ref = lcl_abap_typedescr.
      TRY.
          lcl_abap_elemdescr ?= lcl_abap_typedescr.
        CATCH cx_sy_move_cast_error.
      ENDTRY.
      IF lcl_abap_elemdescr IS BOUND.
        CALL METHOD lcl_abap_elemdescr->get_ddic_fixed_values
          EXPORTING
            p_langu        = sy-langu " Give the language
          RECEIVING
            p_fixed_values = lt_fixed_values " This table will have the fixed values
          EXCEPTIONS
            not_found      = 1
            no_ddic_type   = 2
            OTHERS         = 3.
      ENDIF.
    Regards,
    Sesh

  • Function Module require for Accounting Document

    Hi All,
    Is there any Function Module available for getting Accounting document no which is created after IR.
    Regards,
    Paras

    Hi,
    You can use BAPI_ACC_DOCUMENT_POST.
    Regards,
    Eli

  • Using function module BBP_PD_SC_GETLIST to get list of carts for a plant

    Hi all,
    Im using  the function module BBP_PD_SC_GETLIST  to get the list of shopping carts created for a particular plant.Im passing the plant details like Business Partner Number,Business Partner GUID and Partner func. in the table I_PARTNERS of the FM.Im not passing any other data to the FM.However im not getting any entries in the o/p parameter.
    Can anyone suggest what am I doing wrong?
    Thanks.

    Hi,
    From table BBP_PDBEI  you can get the shopping carts belong to perticular plant. 
    Thanks
    prasad.s

  • Function Module Required for fetching contact details from BUT000

    Hi Everybody.
    I have created a contact using transaction BP.
    these details according to me will get saved in standard table BUT000.
    Now i need standard FM used for fetching all these Contact details.
    Help me i am new to CRM.

    Hi Amit,
    Please check the following:
    Data Retrieval Function Modules:
    Name                                                             Description
    BAPI_BUPA_ADDRESSES_GET              Determine All Addresses
    BAPI_BUPA_ADDRESS_GETDETAIL                Read Address
    BAPI_BUPA_ADDRESS_GET_NUMBERS          Read Address Numbers
    BAPI_BUPA_BANKDETAILS_GET                Determine All Bank Details
    BAPI_BUPA_BANKDETAIL_GETDETAIL            Read Bank Details
    BAPI_BUPA_BANKDETAIL_NUMBERS               Read Bank Details Numbers
    BAPI_BUPA_CENTRAL_GETDETAIL               Read Central Data
    BAPI_BUPA_EXISTENCE_CHECK              Check Existence of Business Partner
    BAPI_BUPA_GET_NUMBERS                               Read Business Partner Numbers
    BAPI_BUPA_RELATIONSHIPS_GET               Determine All BP Relationships
    BAPI_BUPA_ROLES_GET                               Determine All Roles
    BAPI_BUPA_ROLE_EXISTENCE_CHECK          Check Existence of Role
    BAPI_BUPA_SEARCH                              Search Business Partner for Telephone, E-Mail, Address
    BAPI_BUPA_STATUS_GETDETAIL             Business Partner: Read Status
    BAPI_BUPR_ACTIVITYP_EXISTCHECK              Check Existence of Contact Partner Relationship
    BAPI_BUPR_CONTP_ADDRESSES_GET          Read Contact Person Relationship Addresses
    BAPI_BUPR_CONTP_ADDR_GETDETAIL          Read Contact Person Relationship Addresses
    BAPI_BUPR_CONTP_GETDETAIL              Read Contact Person Relationship
    BAPI_BUPR_EMPLO_ADDRESSES_GET        Read Contact Person Relationship Addresses
    BAPI_BUPR_EMPLO_ADDR_GETDETAIL        Read Employee Relationship Address
    BAPI_BUPR_EMPLO_GETDETAIL             Read Employee Relationship
    BAPI_BUPR_RELATIONSHIP_GET              Read General Relationship
    BAPI_BUPR_RELSHIP_CHECKEXIST             Check Existence of General Relationship
    BAPI_BUPR_RELSHIP_GET_DETAIL             Read General Relationship
    BAPI_BUPR_RESP_EMPLO_CHEKEXIST        Read Relationship of Employee Responsible
    BUPA_PARTNER_CONTACT_SEARCH           Searches business partners for telephone, E-Mail, address
    CRM_ORDER_READ                     Get all the Service Contract details.
    Hope this helps!
    Regards,
    Saumya

  • RFC Function module needed for getting table details in APO from R/3

    Hi,
    I need a RFC function module where I can write a query from R/3 to access APO server database table and get the necessary records.
    Regards
    Mac

    Possible ways
    1. Call fm RFC_READ_TABLE and give destination and table name ( But i am not sure how it will work SCIF enviornment of APO)
    or
    2. Create a custom function module in APO side and call from R/3 side using destnation option
    a®

  • Process code's function module required for the IDOC Message type PROACT

    Hi,
    I am trying to trigger an IDOC from ME32K transaction which will carry my Contract agreement details to XI. The IDOC I am using for this purpose is PROACT.PROACT01. But I couldn't find the outbound process code / Function module for the process code associated to this IDOC message type.
    Pls help me out....
    Thanks,
    Ram Kalyan

    I checked table EDIFCT for the message type and found this:
    Function module            Function type    Basic type                                      Message Type
    IDOC_INPUT_PROACT          F               PROACT01                                       PROACT
    Oops...I think you are looking for outbound..Ignore

  • Function module required for BOM Changes

    Dear SAP Guru
    I need the function module which gives me the details of changes done in the BOM.
    Scenario: Need to develop the report which gives only the details of BOM changed on the given date. The BOM level might vary.
    Regards
    Rahul

    Dear
    I think you should have ECM in place to have tracability for any changes carried out in BOM .
    Refer earlier posting : Re: ECM ECR
    If the ECM is in place , then you can see what changes has been done in CC02/03 Environmnet - > Reporting -> Bill of Material.
    Otherwise please try the following Functinal Module : You can also try CEWB and CS80
    1. CSAP_BOM_ITEM_MAINTAIN
    2.CS_BOM_EXPL_MAT_V2
    3.CHANGEDOCUMENT_READ  and CDHDR
    Refer : http://help.sap.com/saphelp_40b/helpdata/en/92/58b521417011d189ec0000e81ddfac/content.htm
    Regards
    JH

  • Function module required for time stamp conversion into MST

    Hello,
    Please let me know if there is a SAP function module that can convert timestamp from GMT or provided timestamp into MST. I will need to use this function in BW transformation.
    Thanks.

    Try this one: TZ_GLOBAL_TO_LOCAL.
    Haven't used it myself yet, but it looks good.
    Good luck!
    Best regards,
    Zhou

  • Function Module required for IBASE component

    Hi Experts,
    Is there any FM which can get the warranty start date with IBASE component??
    Warranty is assigned to IBASE component under relationship tab.
    Points shall be rewarded for sure
    Regards,
    Madhu

    Hi Madhu,
    This the Table that is used to retrieve the Warranty Profile for the Installed Base. CDBD_IL_IBCWTY - Installed Base Components - Warranty Relationship. If you know the IBASE no and the corresponding COMP number then you can get the Warranty related details. Till now I was unable to find any FM that would do the same.
    For the IBASE related details, you can have a look at the following Function Group. IB_CRM_API - IB: CRM APIs for IBase.
    Thanks,
    Samantak.
    Rewards points for useful answers.

  • Update Function Module Required for Deletion/Truncation of Open Hub Table

    Hi All,
    I need to delete/Truncate DB tables i.e. Ztables using Update FM
    can anyone help me with few Update FM.
    Regards,
    NS.

    If you want to Delete Custom DB table then you can use FM RS_DD_DELETE.
    You can delete, if the table is not used anywhere in SAP.
    Close thread if you got a answer
    Kanagaraja L
    Edited by: Kanagaraja  Lokanathan on Mar 16, 2010 9:54 AM

  • Function Module available to get Stock lying against a Sale-Order

    Dear Sir,
    We have function module "KPKA_UTILS_PROJECT_STOCK_CHECK" for getting Stock lying against a WBS (Project Stock) .
    We are looking for a function module to get the Stock lying against a Sale-Order (Sale-Order plus it's Line Item) .
    We request SAP experts to kindly guide us about the availability of such Function Module please .
    We will award full points for the suggested solution pl .
    Rgds
    B Mittal

    Hi
    table MSKA - Sales Order Stock is availble whcih will give the Stock pertainig to a sales Order & line item.
    Hope this helps
    Thanks & Regards
    Kishore

  • Function module name for routing fom production orders

    Function module name for routing fom production orders

    Hi
    There are lot of fun modules related to routing
    like
    BAPI_ROUTING_CREATE
    BAPI_ROUTING_EXISTENCE_CHECK
    goto SE37 Tcode
    enter routing press F4
    you will get a lot out of that use the required one
    Reward points for useful Answers
    Regards
    Anji

  • Function Module / Method to Get Status of PO and Invoice status (Archived)

    Hi Experts,
    I have a requirement where I have to process mass collection of SO, PO and Invoices for certain output triggers based on user input in a Z program. However the requirement states that I need to skip processing for the documents which are archived. I got a method (CALL METHOD cl_sd_archived_sales_documents=>check_sales_doc_archived on ECC 6.4 system) to get Archived status of Sales Order, but could not find anything suitable for getting the same for a PO or Invoice documents. Whatever function module I am getting, requires an input called Archive Key or handle.
    But I will be only having the document number (like a purchase order number or a invoice number). Is there any inbuilt FM or Method in SAP which will let me determine if the document is already archived or not?
    Thanks for your time,
    Anid

    The function module looked promising, but it returns some weired error when I execute. I will check with Basis team, as I tried with multiple PO which are archived (and can not be viewed on ME23n)
    Error ID I got is:
    Exception       NOT_FOUND
    Message ID:          CMS                        Message number:           025

  • Function Module used for user Authentication in B2B webshop

    Hi Gurus,
    Can someone please help me in finding a Function module which is getting called for the user authentication in B2B webshop and where can i find this class file which is getting called in the NWDS?
    Thanks
    Saurabh

    Depending upon if you are coming from Portal (SSO) or B2B logon screen, one of the following function modules is called to authenticate authorize the B2B application usage.
    CRM_ISA_IUSER_LOGIN
    CRM_ISA_LOGIN_CHECKS
    Easwar Ram
    http://www.parxlns.com

Maybe you are looking for

  • Display Null Using Background Color not work in Version 3.0.02

    I use this functionality as a visual signal for null values, but in this version isn't working

  • Retrieve data from a db stuck in upgrade mode

    Is there any clever ideas about how to retrieve data from a database that can only be started in upgrade mode? I can select my user data but cannot think of any feasible way to retrieve it out of the database in a format that i would be able to use t

  • How to cancel auto save option

    Hi All, When using OWB, it is very tricky when close a windows the change was auto saved without ask whether want to save. do you guys have any idea about that? Thanks

  • ITunes won't sync adressbook to iphone

    I have 3G iphone and Macbook Pro. The innitial setup went well and all the contacts on my adressbook synced to my iphone. But after that any additions to the iphone will not sync to my mac and so for new contacts added on my mac's adressbook. I have

  • Load some flat files from ftp location

    HI, I have requirement, i want to load the some flat files from ftp location. but problem is in that ftp location i have multiple files.i want to load flat files starts with file name with numeric. otherwise i have apart from these start with numeric