Functional server screensavers

Anyone know of any screensavers that are fun, but also provide useful server status information?

actually, i searched this forum a bit and found that my problem had been discussed a lot in jan. seems it is a known problem with the DNS, although there was no problem in OS 10.3.9 and i'd like to know what changed. last time it happened i tried one suggested solution, 'dscacheutil -flushcache' and it worked.
maybe it's been fixed in an update i haven't installed yet? hope so!

Similar Messages

  • SmartCard Login not function Server 2012

    I try to login with the SmartCard on a server 2012 rdp-session. It looks like all function, i can select the SmartCard at the login and enter my pin. But after the rdp-window open and i see the login with user and password.
    For a test i setup a new terminal-server 2012 with the same config in the same ad. On this server the login with the SmartCard function without any problems.
    SmartCard driver is installed on both server.
    What can be the problem that the first server not accept the SmartCard?

    Hi,
    Which version of RDP client you are using for RDP connection?
    I suggest you to try latest version RDP client 8.0 or 8.1, and check whether the same issue persist. Kindly double check the .RDP file & the configuration for RDP client for checking “Local Resources” which will show checkboxes for enabling redirection.
    Also try to check the issue with different client on the effected server. 
    Smart Card redirection is dependent on the installation of required software support. Certain infrastructures require Cryptographic Service Provider (CSP). In order for Smart Cards in the environment to work via RDP Smart Card redirection, CSP must be installed
    on the server. 
    The smart card modules for the cryptographic service provider (CSP) maintain a smart card handle cache. When a terminal session is created by using a smart card, the server queries the cache to validate the smart card handle. However, the cache does not support
    multiuser session environments very well. Therefore, if a user runs a smart card transaction, all other users who use a smart card in the logon process are blocked. (Quoted form below KB article). If you have not specify CSP then please try to specify CSP
    with below link for try.
    Specify a Cryptographic Service Provider (Server 2012)
    Apart from this, there is Hotfix available (KB 2521923 \
    KB 949538) for
    server 2008 R2 which may be the issue might causing to stop responding the smart card for RDP connection. (Here providing you only for reference.)
    Hope it helps!
    Thanks.

  • Starting Over - Making a functional OS X Server

    Friends, I need some help here.
    I built my OS X Server first as an Advanced Server and frankly it was about as unintuitive as I've ever seen, Novell OES, SUSE Linux, Microsoft were all easier to get the piece parts working. I searched online for books and all of them are either out of date or have extremely poor ratings. I downloaded all the guides from Apple and while nice they are very basic and lack any kind of really useful detail.
    I have a mostly working server now or more correctly again. The web server functions properly and I can again see the groups and users pages. Webmail is broken again as is iCal. It runs on the server or is at least running, but I can no longer connect to it from any client workstations. Wikis and blogs are working, I can connect to the server from the Macs and presume that the server is advertising properly on SMB (no Windows workstations here at this time).
    The frustration is that I cannot send email from the server (it times out constantly, that I cannot depend upon the configuration (earlier today web services wanted only to connect to the server.domain.com addressing. Webmail had been working and now is not for reasons unknown.
    I had hoped to bring the domain in house instead of hosting externally for a number of reasons. Thus far I cannot see doing this due to the ongoing instability of services. I wanted to use OS X server to leverage the incredible success of the Mac workstations, but on a server instead.
    I am prepared to blow the whole thing away and start over again to make a fully functional server. I'd appreciate to hear from anyone who has made this work fully and would appreciate guidance in making this so. Until today outbound mail was my only real concern, but I have not yet turned on podcast or quicktime services. I do not use DNS or DHCP as services since I have a router doing DHCP and am passing DNS info through it. The server IP address is statically assigned as one would expect. Port forwarding has been configured on the Airport Extreme for SSH (works) POP and Secure POP (untested - don't like POP), IMAP (works), web 80 (works), web 443 (untested - had issues trying to make https work on the server). I also set up forwarding for port 587 but don't know if it's even necessary. I admit to not being any kind of expert when it comes to Mail servers
    I find that although Server Admin and Server Preferences are simple front ends, they lack the richness to get deep (or at least that's my perception so far). I also find that changes to one component has an impact on others (working with mail breaks iCal) and this troubles me greatly.
    Thanks to any and all in advance.

    Now I'm getting somewhere, or at least I think I am.
    Your server should have a static ip outside the dhcp range. assign one first.
    Check. Been that way all along.
    then, configure the dns service on the server itself via server admin.
    create a primary zone for your LAN. it can be real (example.com) or an imaginary, non-routable domain (internal.office). i usually stick with a real domain so that clients can access services inside or out via name instead of monkeying around.
    Check outridertechnology.com is the primary zone
    create at least one A record for the server itself. when doing this, server admin will automatically create a PTR record for it. forward and reverse name resolution is critical.
    Check it created a machine record with the server name leopard1 and it's address 192.168.1.51
    with at least that done, enable dns (turn it on).
    Check done
    verify it's working by adding the server's IP as first resolver in the network preferences (system preferences -> network -> active interface -> dns). i usually add the loopback (127.0.0.1) address and the search domain (the domain for which you created a dns zone above, like example.com).
    Check did this. Note now that Safari running on the server can find www.outridertechnology.com when I make the first resolver and search domains 127.0.0.1 and outridertechnology.com but it reports that blogs and wikis are not active. If I go to the web server from a workstation that still only uses the ISP DNS server, I see the wikis and blogs as active. There's probably a step missing by me somewhere.
    then dig to verify the forward and reverse lookup. assuming your server's (server.example.com) at 10.12.14.2:
    dig server.example.com (should result in an answer pointing to 10.12.14.2)
    dig -x 10.12.14.2 (should result in an answer pointing to server.example.com)
    Check from Terminal on the server itself dig leopard1.outridertechnology.com points to 192.168.1.51 dig -x on 192.168.1.51 points to leopard1.outridertechnology.com
    you can also use host, nslookup… whatever you're used to using.
    Umm not sure here. Host reports that outridertechnology.com 's mail is handled by leopard1.outridertechnology.com NSLOOKUP says outridertechnology.com cannot be found, says 127.0.0.1
    then, once that's established, i'd add it as the first resolver for the dhcp client range so that all clients are on the same page. if dhcp is running on the airport, add it there within the dhcp range. add the ISP's dns servers as secondary, tertiary. there's also a section within the dns config area of server admin to assign forwarders. add the ISP's dns server's there. in 10.4 and below, this involved a manual edit to the named config file. of course, you can still edit named.conf and the zone files manually, but server admin may step on your changes later if you add features not available via the gui.
    Have not changed the router or the clients since it appears that something still is not right
    do this and then proceed. i understand you have dns configured externally, but you really need a dns server on the LAN for all this to work.

  • Move Certification Authority Web Enrollment to new server issue.

    Hello, 
    i'm trying to move the Certification Authority Web Enrollment  from one server to a new one. I've got a fully functional server where i can enroll any certificate i want and everything is working properly.
    on the new server i configured I'm facing a problem that seems to be an impersonation issue. Indeed, while i try to enroll a certificate i get the following error msg from the interface :
    Request Mode:
    newreq - New Request 
    Disposition:
    (never set) 
    Disposition message:
    (none) 
    Result:
    The RPC server is unavailable. 0x800706ba (WIN32: 1722) 
    COM Error Info:
    CCertRequest::Submit: The RPC server is unavailable. 0x800706ba (WIN32: 1722) 
    LastStatus:
    The operation completed successfully. 0x0 (WIN32: 0) 
    Suggested Cause:
    This error can occur if the Certification Authority Service has not been started. 
    an i can also see on the CA it targets the following  application error event :
    Event 18209, ComRuntime:
    The application-specific permission settings do not grant Local access permission to the COM Server application C:\Windows\system32\certsrv.exe with APPID 
    {D99E6E74-FC88-11D0-B498-00A0C90312F3}
     to the user NT AUTHORITY\ANONYMOUS LOGON SID (S-1-5-7) from address LocalHost (Using LRPC). This security permission can be modified using the Component Services administrative tool.
     While i register a certificate on the server were it all works fine i can see event in the Security log on the CA that authenticate the user i generate the certificate with, where-as with the server were it does not work, all seems to be anonymous.
     IIS configuration are identical on both servers and the delegation has been set identically too ( ADUC object )
     Any idea how what I could check next? 

    Hi,
    Regarding event 18209, please follow steps from this article below to assign access permissions for the user mentioned in the event message:
    Event ID 18209 — COM Security Policy Configuration
    http://technet.microsoft.com/en-us/library/cc726319(v=WS.10).aspx
    Best Regards,
    Amy
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • EVDRE server logs

    Hi
    Does anyone know where can I look for EVDRE function server logs. I'm using SAP BPC 7.5 version for NetWeaver.
    I found in one of notes that two files should be created EVDATASERVER_DEBUG.TXT and EVDATASERVER_TRACE.TXT
    under x:\OutlookSoft\Data\Webfolders\appset\appname\privatepublications\username".
    But this path is for Microsoft version and I can not find where those files should be located for NetWeaver version.
    Any ideas?

    Hello,
    BPC NW and BPC MS have some differences, including this logging functionality. For BPC NW, you can check application logs in ABAP tier, using transaction SLG1.
    Go to SLG1, select object "UJ" and execute. The "SubObject" field can also help to narrow down your query.
    Of course, if you are having problems, it is good to check ST22 and SM21 if you can find any dumps
    Hope it helps! Otherwise, if you let us know what is this problem you have, we may try to help.
    Debora

  • Upgraded from server 2008 r2 to server 2012 r2 standard and nothing is working

    I'm actually working on putting together a server using Server 2012 r2 as well, but we tested everything on it prior to launch and are now in the migration phase with only one application not cooperating: Exchange 2010...If you have another functional server running to keep DirSynch going with, would definitely suggest either upgrading something or downgrading another to allow for compatibility issues.We're going to keep using Exchange 2010 on the server it's installed on until we can upgrade it to 2013, otherwise if we moved it while everything else is moving, we will lose email altogether and end up with a lot of angry users...Certainly a lot of compatibility issues regarding server OSes I'm finding in my 1.5 years working here so far... I'm quickly learning the importance of researching these kinds of issues, So hey, welcome to...

    Hi Everyone
    I am desperate, I have upgraded a server to 2012 and it appears to stop DirSync from running. I can't uninstall the program because it doesn't launch the uninstall program from the control panel. I get an error message
    windows.immersivecontrolpanel server execution error
    This topic first appeared in the Spiceworks Community

  • Re-evlauting OSX Server Role

    Advice and suggestions re follwoing would apreciated.
    Context
    3 offices connected by VPN handled by dsl routers
    Main office 6 macs 6 main users.
    1 remote admin office
    1 remote branch office
    OSX Server current Panther, Tiger available.
    Redhat Serving Filemaker
    Fedora DNS server
    ARD across the board
    Background
    Have been running OSX Server serving mail, web site (connected to Filemaker) and user home directories centrally managed on the server.
    Concept was anyone can log in at any machine and work.
    Experience has been that nobody does. Also that serving home directory up to remote office has been slow and the centralised management never quite fulfilled the promise eg printers still have issues with drivers being on server and client. People like to customise their workspaces etc etc.
    We are about to move up to Filemaker 8 Server and Tiger Server. (2 G4 800s available).
    We had a server failure (inexplicable disc full and refilling).
    Emergency response was to move mail off to Fedora and set up local user accounts on the machines to keep people working while we resolved the server issue.
    Question.
    My inclination is to give up on LDAP Home directories and leave everyone with their local user accounts.
    Centralise management through ARD and ssh.
    Leave the mail on Fedora and use webmin to administer it,
    Leave the 2 G4 *00s with on OSX Svr on each, one for Filemaker and one for the web.
    One down side is inability to build a machine from an image and have all users available but I’m wondering what else beyond that am I missing.
    Any guidance on which way to go would be appreciated. Back to mail, web and users on one server or local users and single function serve.
    Regards
    Eric

    Hi David
    Thanks for responding. As a brief OFF topic I was showed a Unix friend your name in the list yesterday whose login in our systems is davidh ! He said he's not moonlighting
    Well, that's several kettles of fish
    If you have a moment we could feast !
    I would never have recommended using network home
    directories in the situation you describe, and that
    feature is not intended for regular use remotely, not
    at all. Clients are expected to be on the same
    network. I'm certain that over VPN it would be an
    atrociously slow if the added latency didn't cause
    alot of failed logins.
    We have done ok on that front but speed has been problematic. Hence I was already thinking of a local account and rsyncing back to the server.
    My main aim is to reduce time I have to spend managing the technology and the attractions were:
    1. Single drive to back up.
    2. Single consitent interface for people (which they hate !)
    3. Login anywhere for anyone
    4. Being able to do instals updates etc by picking up their machine (mac minis) mounting as a target drive. Overwriting with an updated image using netrestore (eg updating panther to tiger)
    5. Single place to backup
    We had been using ASIP and Remote Access/Timbuktu so I didn't have much idea of what Remote Desktop could do.
    Is there a most efficient way to manage the machines with local users accounts ?
    As for the issue of drive(s) filling up, that one
    issue alone merits its own topic
    I suspect in the end one user didn't ever empty her mail trash. I wasn't monitoring and the disc filled. Next incoming mail put it into a flat spin. Mounted in target disc mode removed a bunch of stuff. Rebooted but couldn't log in. Discovered afp had switched off. Turned it back on, coould log in and all the user directories served up again ok. Sort of could have recovered better than I feared.
    , but separating
    services between different servers (when that's an
    option) in generally a good idea.
    I'm leaning that way confining OSX to web and filemaker. Leaving mail where it is now which is noticeably faster because its not running an a g4 with a 10gig drive and 800mg of ram.
    You can use Carbon Copy Cloner to make a base image
    of the client machines for use with a bootable
    Firewire drive, or use the server tools to setup
    NetBoot/NetInstall. Bombich's NetRestore Helper is
    also an excellent alternative way of setting up and
    managing the images.
    Note that if you have or get any Intel Macs, you'll
    want to run Tiger server if intending to
    NetBoot/NetInstall those client Macs.
    This is ok now.
    Have users use the OS X server as a central
    file-server, that will probably be a good start. Then
    implement backup for the server if you haven't
    already.
    The challenges I'm seeing at the moment are:
    1. Setting up print settings on each machine
    2. Configuring each mail app for each.
    3. Creating a backup method that has to log in to each users machine to backup stuff.
    4. Keeping the users in the server directories when they save so I don't wipe out stuff if I upgrade.
    5. Getting Remote Desktop's install package option to work with OS upgrades form PAnther to Tiger and so on into the future.
    Its that repetitive stuff I have to either remotely control there machine to do or sit at it to do that's daunting.
    eg. I couldn't find anywhere a way to use the Terminal function in Remote Desktop to set their mail clients to the new mail server address. Is there a mac terminal apps reference.
    Any thoughts on best management of these sorts of things
    Regards
    Eric

  • Lion Server Recovery image is broken

    I had purchased a new Mac mini Lion Server for my office. Normally I am a Linux server guy, but wanted everything to be 100% Apple for continuity.  On first plugin, the server worked just fine.  After I spent time learning it and it's settings and configs, I decided that I wanted to start fresh.  So I used the recovery console to download the boot image from Apple and recover my Lion Server from scratch.
    Upon a successful installation, I found that the Wiki and the Profile managers failed to operate.  After a long story and chasing each individual error around Google, I decided to retry a new image again.  So again I downloaded the recovery image and started over. Upon restart I found the same errors. For the longest time I assumed it was a sheeting that I was messing up and causing it. It had something the do with the Postgres database.
    After 5 reinstalls I still had not a fully functioning server.
    I had configured a MacBook air to remote manage the server by copying the server app to it.  The Air also had Lion on it.  I decided to try an experiment and installed Lion fromUSB instead, made from the Mac air. The installation went flawless. I then copied the server app over to my Mac mini server to complete the server functions. It also installed flawlessly. I had not touched a single setting on the new OS and the server functioned perfect.
    My only diagnosis has to be that the original net install recovery image which is passed out from Apple's remote servers, is that particular image is broken.  If you have conducted a server recovery from booting using apple's recovery system, and are having massive Postgres problems, failed wiki and profile manager issues, then consider that you have downloaded a bad image and create a new install from a local DVD instead.
    Today my server runs perfect and has ever since I installed locally.

    Thanks and sorry for the super late reply! At the end I had to get a wifi router to get it restore! Since the mini came with Lion server, it won't let me use the thumb drive to install. I can see it if I press option on start up, but when I chose it, it gave me a "no entry" icon
    Anyway, since the office needed a wifi router anyway, so ......... yeah thanks!

  • Can't get Mountain Lion Server Server to upgrade properly - Configuring services

    Hi All,
    First of all thanks for any answers or suggestions you might have. We are a small business with about 25 employees. We have been running Lion Server for email and collaboration without much issue. Today we decided to upgrade to Mountain Lion Server, which was a big mistake apparently. We downloaded and installed Mountain Lion which went fine. We then downloaded and installed the new Server app and that's where things got hairy.
    The Server app got to the part where it says Configuring Services and just sat there spinning. After about an hour I figured something was up and noticed in the console that there were a bunch of errors trying to update certain things. Needless to say we had to force quit the Server app after a long while and nothing got updated/migrated. We were left with a non functional server. Luckily we had set up the Lion Server to clone to another drive and we were able to boot to that to get back to work.
    None of us have much experience with command line, part of the reason we got Lion Server in the first place was it's ease of use and GUI. So has anyone else had similar issues? We are kind of at a loss as to where to go next. Thanks!

    It is indeed an option to wait, although I did manage to upgrade four servers that all have working forward and reverse DNS from Lion Server to Mountain Lion 10.8.
    After installing OS X Server on top of that server specific items like mailboxes returned

  • Is it possible by using boot camp to set up a high spec mac pro to operate as a pc server for a network of approx 20 pcs

    My company has recently bought a high end mac pro to act as a mac server. However it is no longer need but business does need a new server for a network of about 20 pcs. Is it possible or practical using boot camp to tuen the mac into a fully funtioning pc server?
    jb

    Thanks for the info. I don't have Server 2008 but the Boot Camp documentation says Windows 7 only is supported. Glad you jumped in knowing that Server 2008 is supported.
    In the original poster's post he said he wanted a fully functioning server so I assume he wants Server 2008. If he is misusing the term server and only needs a peer network then he can install Windows 7.

  • Socket closing before server can readObject()

    I am trying to create a multi-threaded client server application that transmits objects. At the moment, I am having a hard time getting the sockets to coincide.
    I start my server and wait for a connection:
    ServerSocket ss = new ServerSocket(port_num);
    Socket s = ss.accept();Then I create a new socket in the client to connect to the server:
    Socket cs = new Socket("localhost", 8888);When the server class gets the connection, it creates a thread with the socket:
    new DrawThread(s);The thread constructor creates an Input stream:
    ois = new ObjectInputStream(sock.getInputStream());After the client creates the connection, it creates and ObjectOutputStream and writes my object:
    oos = new ObjectOutputStream(cs.getOutputStream());
    oos.writeObject(objects.get(0).getShape());Meanwhile in the run() method of the thread, we try to read it:
    ois.readObject();However at this point I get an IOException because the client function was done and had exited so the socket was closed.
    Any Idea what I can do to combat this problem? Full code for my client function, server and thread classes are below.
    Client function:
       public void serverSave(){
            Date d = new Date();
            try{
            //initialize class network and IO vars
            Socket cs = new Socket("localhost", 8888);//create server
            oos = new ObjectOutputStream(cs.getOutputStream());
             //write the objects to the server
               // for(int i = 0; i< objects.size(); i++){
                     oos.writeObject(objects.get(0).getShape());
                //}//end for
           catch (UnknownHostException uhe){System.out.println("client uhe");System.out.println(uhe.getMessage());}
         catch(IOException ioe){System.out.println("client ioe");System.out.println(ioe.getMessage());}
         finally{
                    //print out time to see when the function exits
              System.out.println(d.getTime());
       }Server Class:
    import java.io.*;
    import java.net.*;
    class DrawServer{
         static int port_num = 8888;//default port number
         public void DrawServer(){}
         public static void main(String args[])throws IOException{
              //don't forget to close socket
              ServerSocket ss = new ServerSocket(port_num);
              while(true){
                   System.out.println("begin listening");
                   //blocking wait for a connection
                   Socket s = ss.accept();
                   //create new thread for the client
                   new DrawThread(s);
                   System.out.println("end listening");
                   s.close();
              }//end while
         }//end main
    }Thread Class
    import java.net.*;
    import java.net.Socket;
    import java.io.*;
    import java.util.*;
    class DrawThread extends Thread{
         private Socket sock;
         private ObjectInputStream ois = null;
            private ObjectOutputStream oos = null;
            ObjectOutputStream out = null;
            //create a file input stream or buffered stream to accept filename from client???
         public DrawThread(Socket s){
              sock = s;
              try{
              ois = new ObjectInputStream(sock.getInputStream());
                    oos = new ObjectOutputStream(sock.getOutputStream());
              start();
              catch( IOException ioe){}
         public void run(){
              Date d = new Date();
              System.out.println("Thread started");
              try{
              int i = 0;
              while(true){
                   System.out.println("getting item " + ++i);
                   ois.readObject();
              catch(FileNotFoundException fnfe){System.out.println("fnfe");}
              catch(IOException ioe){System.out.println("ioe     " + + d.getTime());System.out.println(ioe.getMessage());}
              catch(ClassNotFoundException cnfe){System.out.println("cnfe");}
              finally{
                   try{out.close();}
                   catch(IOException ioe2){System.out.println("ioe2");}
              System.out.println("Thread ending");
    }Thanks,
    Shannon

    You have one problem with your DrawServer class:               new DrawThread(s); // this starts a thread that uses the socket
                   System.out.println("end listening");
                   s.close(); // this will close the socket while it is used in the DrawThread thread.Instead close the socket in the finally block of the DrawThread run() method (no need to close the ObjectOutputStream in that block).
    Also since you are passing a variable number of objects between the client and the server
    you should create a custom made protocol for both your ends to always be in sync with each other.
    For instance the client could send first the number of objects to be sent,
    then loop for this exact number and send the objects,
    then upon receiving the server response close its socket.
    The server could read for the number of objects to read,
    then loop for the exact number and read the objects,
    then send a response and close its socket.

  • HTMLClient/UserCode table.lsml.js Created code VS. Server table.lsml.cs Created code?

    Is there a precedence order between these to sets of Created functions (Server _Created, then HTMLClient .created)?
    Do I need both types of Created functions?  Or is that just duplicating code to inits in both?
    Thanks.

    Hi KMHaynes,
    For this issue, you need understand how Lightswitch works in presentation layer and logic layer. See:
    LightSwitch Presentation Layer
    LightSwitch Logic layer
    Best regards,
    Angie
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How to record screensaver as a movie

    Does anyone know of a way to record any of the OS X screensavers as a movie file?
    I have Copernicus (a freeware program) but it doesn't seem to function with screensavers.
    Anyone know any tricks on this?
    Thanks in advance for any tips you can offer!

    I am just curious if there is any way to record that photo mosaic screensaver...
    Thanks for the update... Although I am still unsure whether you are referring to the mosaic created by dropping individual photos or the mosaic that evolves into the next photo. Be that as it may, the process is the same. In this case, as David previously mentioned, your best bet is to use on of the "screen capture" applications since it does not fit the scenario described earlier.
    CLICK HERE TO SEE A SAMPLE CAPTURE
    As you did not provide specifics as to target requirements, I captured my full 1680x1050 display screen and scaled it to 50% for the sample above. Since I am using an original PPC G5 2.0 platform, my frame rate for a display this size was limited to a maximum in 16-17 fps range, so I elected to capture at 15 fps. (You should be able to better on your machine if you want.) In any event, there should be a number of screen capture applications on the market if you search around. Like David, I tend to stick with Snapz ProX from Ambrosia as I have been using it for a number of years and it has served me well over that period.

  • Error while creating Transport role

    Hi,
    I have created a new transport role - " Transport manager"  but unfortunately the import function of that doens,t work. It gives Error: "Unexpected Error. See System log for more details...."
    In the NWA i see:  ' ( ' com.sapportals.portal.transport.ui.ImportComponent ')' ImportComponent.doOnUpdatePreviewPage(): unexpected error; action=onBrowse.
    The same role assigned to user with content admin and system admin rights works fine.
    Any ideas?
    Many thanks,
    Dharmi

    Hi Kotty,
    Read it loud......
    import of role failed or after importing users unable to see?
    >> Neither. I am referring here to the standard ' import'  function provided by SAP for System Administration -> Transport -> Transport Packages -> Import..
    You told system admins and content admins can able to see that role . So,please check end user permission of that role and assign it to relevant groups or everyone if you want to allo all users to see.
    >> I mentioned, that If I (having Content admin and System Admin rights) am assigned the Transport Manager role, then I don't get an error.
    Whilst if this role is given to the transport manager wherein he has just this Transport manager role. ...only with import function -> server option selected ->clicking on search gives an error.....
    This transport manager role is created by making a copy of System Admin workset and assigning only the Transport related activities.
    Regards,
    Dharmi

  • Scripting Guys need your help

    Hello All,
    I have a script which is working absolutely fine in workgroup(Windows logs backup) - windows server 2012 but if i run in domain environment found error and not able to pull security logs. only pulling application and system with error.
    Script is here,
    Function Server-Eventlogs {            
     Param(
      $Computername ="$ENV:COMPUTERNAME.$ENV:USERDNSDOMAIN",
      [array]$EventLogs = @("application","security","system"),
      $BackupFolder = "C:\Eventvwr\"
     Foreach ( $i in $EventLogs ) {
     If(!( Test-Path $BackupFolder )) { New-Item $BackupFolder -Type Directory }
    $eventlog="C:\Eventvwr\$Computername" +"_"+$i+"_"+(Get-Date -Format "yyyyMMdd")+ ".evt"
      ##$eventlog="D:\Eventvwr\$i" + (Get-Date).tostring("yyyyMMdd") + "$Computername" + ".evt"
     (Get-wmiobject win32_nteventlogfile -ComputerName $Computername| 
      Where {$_.logfilename -eq "$i"}).backupeventlog($eventlog)            
     ##Clear-EventLog -LogName $i            
     }# end Foreach            
    }#end function  
    Server-Eventlogs
    Error is here 
    You cannot call a method on a null-valued expression.
    At C:\Users\Administrator\Desktop\backupscriptfinal.ps1:18 char:2
    +  (Get-wmiobject win32_nteventlogfile -ComputerName $Computername|
    +  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : InvalidOperation: (:) [], RuntimeException
        + FullyQualifiedErrorId : InvokeMethodOnNull
    Will appreciate for your help.....
    Cheers!

    Here is a sample of what you will have to do.  It still will fail under many different scenarios.  Designing the error handling for complext tasks is not trivial.
    Function Backup-Eventlogs {
    Param(
    $Computername=$ENV:COMPUTERNAME,
    $EventLogs=@('application','security','system'),
    $BackupFolder='c:\ELBackups'
    Begin{
    $datestring=Get-Date -Format 'yyyyMMdd'
    Process{
    foreach($computer in $Computername){
    $remotefolder='\\{0}\{1}' -f $computer, $BackupFolder.Replace(':','$')
    If(!(Test-Path $remoteFolder)){
    New-Item $remoteFolder -Type Directory
    foreach($logname in $EventLogs){
    Try{
    $EventLog=Get-wmiobject win32_nteventlogfile -ComputerName $computer -Filter "LogFileName='$logname'" -ea Stop
                        $filename='{0}\{1}_{2}_{3}.evt' -f $BackupFolder,$computer,$logname,$datestring
    Write-Host "Backing up $logname to $filename on $computer" -ForegroundColor green
    $EventLog.BackupEventlog($filename)
    Catch{
    Write-Host "$computer $logname $_" -ForegroundColor red
    Backup-Eventlogs
    ¯\_(ツ)_/¯

Maybe you are looking for

  • I can not go from one app to another on my iPad without a hard reboot

    I have just bought an iPad mini and my husband has a regular iPad. Neither one of us can move from one website or application to another without  rebooting. I have no problem with my pc laptop. We are next to the router and the security is WPA-2 with

  • How to compile a Form in Unix

    Dear all I am using forms 10G. I have a form and I want to compile it in Unix . Can you please tell me the solution step by step . I was reading the old blogs here ,and tried the same but did not get the solution . Please help me .

  • Mail: Display Name in "To:" Field

    Hi, In the mail app To: field a display name is associated with an email address. For a particular email address I want to remove this association. (apols this is difficult to explain). I am a member of an email group called TriLondon (at) yahoogroup

  • Power Cord for EN489AA Docking Station

    I've lost the power cord for docking station EN489AA, and need to order a new one, but can't find the part number online.  Can anyone help?  Thanks.

  • One website can't be accessed

    I can't seem to access www.mybanner.gvsu.edu anymore. I came to firefox because I've already been having this problem with google chrome and internet explorer without tampering with settings. Now, I can't access the website with firefox either. The p