Functional SPEC  for  Condition record

Suppose i am given a condition record for a Material PR00 as 200/- now i want to generate a report that disply  pr00 200/- for this i want how to write a functional SPEC to ABAP to generate a report.

Hi Rama ,
                   The Functional Specification would be like this
Input Screen
Date to and from
Mtaerial to and from .
Logic would check for date and material in condition table for PR00 ( can be found from access sequence V/07 transaction ).
Obtain the condition record number and enter that number in table KONP and get field kbetr and kwert that would rate and amount and display ..
Please reward if it useful.

Similar Messages

  • Functional specs for BDC

    Kindly can ayone helo me out in prepare Functional specs for BDC For f-28

    Hi
    There is no need of preparing FS (Functional Specs) for BDC.
    You can Record the BDC and just give the Recording Name to the ABAP Guy, he will prepare the BDC based on that recording.
    Go to SHDB and do the Recording.
    Regards
    Venkat

  • Functional specs for customer hierachy

    Dear Gurus,
    I need to develop functional specs for customer hierarchy.the requirement is to create a new hierarchy type and move all the existing records from the present customer hierarchy setup since the present system has lot of scrap data.for this i need to develop a functional and technical specs.can anyone please send it to me.can any one please help me here at vsapservicesatgmail.com.
    thanks,
    sap_consultant
    Edited by: sap_consultant1234 on Dec 30, 2011 5:51 AM

    Hi Utpal,
    Welcome to SDN,
    Being a newcomer to forum before posting the thread read the forum rules,you are asking to send the details to your mail which is forbidden by the forum.
    Coming to the thread  Customer Hierarchies stored in table KNVH,go to SE16N give the table KNVH get valid inputs and build
    valid logic.
    Regards
    Ram

  • Release procedure for condition record

    Hello Gurus,
          please tell me how to run release procedure for condition record. especially the function of the release status and process status.
    thanks very much!

    Hi,
    Please go through the following information.
    [Relase Procedure for Condition Record|http://help.sap.com/saphelp_47x200/helpdata/en/a4/af9e78e69611d2ace10000e8a5bd28/frameset.htm]
    [Release Procedure for PR|http://www.sap123.com/showthread.php?t=59]
    Reward if helpful.
    Thanks and Regards,
    Naveen Dasari

  • You are given functional specs for a BDC program

    You are given functional specs for a BDC program
    and you need to decide whether to write a method
    call transaction or a session. How u will decide?
    plz explain clearly

    depends of type of erro handling required and amount of data to be transfered, we can decide which is best method.
    call transaction - no errorhandling, we have to write a code to show errors
    sessin method - errohandling is there, locking mechanism is there.
    for large amount of data , we should go for session method. for faster data transfer we can go for call transaction

  • Anyone written functional specs for reports?

    Please explain how to write functional specs for reports in sales? How is it done? I need to be able to speak clearly in the interview so help is greatly appreciated.
    Thank you.

    Hi Haken,
    Basically functional spec contains the functionality to be implemented.
    http://www.saptechies.com/what-are-functional-specifications/
    Suppose you need to write a spec for Treausry report.
    Then you will write the following things( this is only for your understanding)
    Treasury Report u2013 Receipts & Payments.
    1.Business Requirement Study:
    The Treasury Department of the Corporate Finance Division needs various information for reporting and planning. The proposed requirement would provide information in the form of movements in a number of selected GL Codes involving Customer and Vendor Reconciliation Accounts and Inter-Bank transactions.
    1.1
    Enhancement Title:Treasury Report u2013 Receipts & Payments
    Enhancement Type: Report
    Enhancement Number: 1245m
    SAP Application Module:FI
    Priority (H, M, L):     M     Related Documents:
    1.2
    End User Name(s): XYZ
    Business Process Advisor:     YZX
    Functional Designer: Vivek Baddula
    1.3 Risk Assessment
    This section will address the risk of pursuing the system development. Any unknowns such as new technology and critical dependencies should be discussed in this section.
    1.4  Alternatives
    If there are more than one alternative to handle the business requirement, this section should list such alternatives and the issues that may arise from implementing them. Nevertheless, the optimum alternative discussed in the design overview will be used
    1.5Estimated Budget in Man-Hours
    STAGE     MAN-HOURS
    Design     0.00
    Build     0.00
    Test/Release     0.00
    TOTAL     0.00
    2.Selection screen fields.
    BUKRS           Company Code       parameter         Mandatory
    GJAHR            Fiscal Year            select options   Mandatory
    BELNR            Document Number select options
    SHKZG            Debit/Credit ind       parameter
    DMBTR            Amt.in loc.cur.        parameter
    3.Retrieval Logic:
    Put the selection parameters in table u2018BSEGu2019 and retrieve the following details.
    BUKRS                             Company Code
    GJAHR                             Fiscal Year
    BELNR                             Document Number
    SHKZG                             Debit/Credit ind
    DMBTR                             Amt.in loc.cur.
    WRBTR                            Amount
    PSWSL                             General ledger currency
    HKONT                             G/L Account
    3.1.     Total DMBTR of all BELNR by group and by SHKZG as H and show under the Debit Column of respective groups (Customer/Vendor/Inter-Bank).
    3.2.     Total DMBTR of all BELNR by group and by SHKZG as S and show under the Credit Column of respective groups (Customer/Vendor/Inter-Bank).
    3.4.     Similarly consider only those documents which have a PSWSL ne INR and show them under different group and SHKZG.
    4..     Output Display::
    Here we mention the format of the output and the fields need to be displayed.
    This is just a sample prototype ...
    Hope this will help you...
    Regards,
    Viveks

  • Functional Specs for Mapping Idocs to EDI

    Hello Friends ..
    Am new to world of EDI...
    can any one explain ..wat do u mean by devolping functional specs for mapping IDocs to EDI..
    If you can provide me with examples or if you guys can suggest any site where i can browse some material about EDI..i wud really appreciate...
    Best Regards

    Hi Rohan,
    >>>do u mean by devolping functional specs for mapping IDocs to EDI..
    you have to know which idoc fields you have to map to EDI message fields
    take a look at those links:
    they will show how do you map different IDOC message types to EDI messages
    <b>IDOC - EDI mappings:</b>
    http://www.sapgenie.com/sapedi/mapping.htm
    <b>Analysis of the compatibility of EDIFACT messages in the form of SIMPL-EDI with the IDoc Interface:</b>
    http://www.sapgenie.com/sapgenie/docs/SIMPL-EDI-E_ORDERS.doc
    Regards,
    michal

  • Functional specs for output of ship and debit contract

    Hi All,
    Does anyone have a doc on the functional specs for output of ship and debit contract? If so pls email me at [email protected]
    With Thanks & Warm Regards
    SK

    What is the exact info which you are looking for regarding ship and debit contract?. What do you mean by functional specs..?.

  • Additional Field for Condition Record ..............

    Hi Gurus
    Plz read the Question Properly
    I know that for adding a new field as key field for condition record , one needs to append the structure( main ) KOMPAZ so that the field appears in KOMP structure .
    Say want Shiiping Point as one of fields in Condition Records. ....VSTEL field
    Now when the field appears in KOMP , then we can CREATE CONDITION RECORD FOR THE SAME
    FOR EG: *SALES ORG - DISTRIBUTION CHANNEL-CUSTOMER-SHIPPING POINT-MATERIAL..... BASED MATERIAL PRICING
    WHAT I FAIL TO UNDERSTAND
    1.WHY WE PASS SHIPPING POINT ( VSTEL) FIELD FROM LIKP -VSTEL TABLE TO NEW FIELD DEFINED.
    2.LIKE SALES ORG/ DISTRIBUTION CHANNEL ALSO ARE DEFINED IN ENTERPRISE STRUCTURE AND VALUE IN CONDITION RECORD IS PICKED FROM THERE ONLY, WHY NOT SHIPPING POINT.
    WHY THIS ??????....
    Supply the new field you defined by including the following source code line in
    USEREXIT_PRICING_PREPARE_TKOMP:
    MOVE xxxx-VSTEL TO TKOMP-ZZVSTEL.
    In order processing you find the user exit in Include MV45AFZZ, and in billing document processing you find it in Include RV60AFZZ.
    Regards
    Rohit

    > Plz read the Question Properly
    I read the question properly ;-).
    > WHAT I FAIL TO UNDERSTAND
    >
    > 1.WHY WE PASS SHIPPING POINT ( VSTEL) FIELD FROM LIKP -VSTEL TABLE TO NEW FIELD DEFINED.
    The first thing you need to understand is that the condition records value is not based upon the the enterprise structure which you have defined. Rather it will pick value from the sales documents which we have created. The reason behind including this LIKP-VSTEL is that only, Just imagine, where you are using condition records??? in Sales order, in delivery, in billing..... and based on the data passed in these documents your condition records will be populated.
    Again for example : you have maintained record for Sales org 1000, DC 10, division 00 shipping point 1000 then the record will come into the document provided the document should fulfill these all.
    I hope this will make you understand this.
    > 2.LIKE SALES ORG/ DISTRIBUTION CHANNEL ALSO ARE DEFINED IN ENTERPRISE STRUCTURE AND VALUE IN CONDITION RECORD IS PICKED FROM THERE ONLY, WHY NOT SHIPPING POINT.
    No the records are only coming from the Sales documents. only.
    Thanks,
    Raja

  • Functional specs for Open BI reports

    Hi
    Has anyone written functional specs BI report. Can you help me out with an example?
    Thanks
    Tarang

    Hi Tarang,
    I never got an oppertunity to developed a Functional Spec for BI to my knowledge it is not a big deal to prepare it.
    Here we go you must be having atleast what you want from R/3 or the Functional Spec from Functionl req.
    That will contain the R/3 Fields and Table names, so based on that you have to find which app area does it comes.
    Then from there by seeing the fields and cross checking the Datasourcess under that application you can decide the the data source.
    Once the data source is decide you can prepare the Gap analisys to proceed further.
    By above details you can prepare a Functional Come Tech Spec.We made all these kind of specification(Functional Come Technical Spec).
    I believe there is no saparate Functiuonal Spec for BW activities.
    Best Regards,
    VNK.

  • Authorization level check for Condition records.

    Hi,
    Hi Gurus,
    Pls help me out in the the following scenario.
    I want to activate Authorization level check for Condition records.
    For example, Product price PR00 is being entered by first level.
    After verification done by second level only, that condition record to be used for sales order processing.
    I have gone through Process status & Release Status. But once it is Blocked  i am not able to release it...
    Rgds,
    Amol

    Amol,
    Please confirm transaction code you are using in this scenario to release. I can help with this, just a little more detail.
    Thanks,
    Jay

  • Process Status & Release Status for Condition Record

    Hi Gurus,
    Pls help me out in the the following scenario.
    I want to activate Authorization level check for Condition records.
    For example, Product price PR00 is being entered by first level.
    After verification done by second level only, that condition record to be used for sales order processing.
    I have gone through Process status & Release Status. But not getting full clarity on this.
    Rgds,
    Senni.B

    Hi,
    Please go through the following information.
    [Relase Procedure for Condition Record|http://help.sap.com/saphelp_47x200/helpdata/en/a4/af9e78e69611d2ace10000e8a5bd28/frameset.htm]
    [Release Procedure for PR|http://www.sap123.com/showthread.php?t=59]
    Reward if helpful.
    Thanks and Regards,
    Naveen Dasari

  • Functional spec for STO

    Hi
    Could some one provide functional spec for a( STO) z report to  fetch below data  .
    Receving point
    ship to party
    STO number
    Material number
    delivery creation date
    quantity in storeage location

    Dear Rajakumar Reddy,
    Your client/company will be having a format for FS.
    In that FORMAT, give your inputs for STO Report based on the following points.(as i dont have system access now, check yourself before concluding. to find the table and fields, you have to press F1 on the value in the screen)
    Receving point - in ME22N/ME23N, put the mouse over the receiving plant and press F1. You will get the table and field.
    ship to party - in LIKP check for KUNNR/KUNAG
    STO number in LIKP check for VBELN
    Material number - in LIPS check for  MATNR
    delivery creation date- in LIKP check for DATE
    quantity in storeage location - GET THE TABLE FOR MMBE and input the material and storage location to fetch QTY.
    Thanks & Regards,
    Hegal K Charles

  • FUNCTIONAL SPEC FOR GL BALANCES

    THere is a functional spec for LSMW for uploading gl balances thru FB01. There are feilds like legacy account, sub account and other fields that the business user wants to flow into SAP. But in FB01 there is only one reference field which i have used for legacy account number. How do we create additional fields in FB01 in order to input other fields like legacy sub accounts and other info that would flow into SAP.
    I was told to work with crosswalk tables. WHat are they and how do I use them here. Please provide detailed instructions on how to bring in additional fields from legacy into FB01
    Thanks

    Lakshmi, can you please send me the format of that func spec, if possible?

  • Functional Spec for Purchase Order Layout Sample

    Hi,
    Can somebody please assist me with a sample Functional spec. for defining a PO form/ layout?
    Thanks

    Hi
    yes usually customers ask to adopt the same layout as they are already using. Usually I draw the layout on visio and assign a number for each field. In the spec I put the layout picture and and mention for which field where data will come from.
    For example:
    A. PO header:
    Field number | Description | Source
    1 | PO number | EKKO-EBELN
    2 | Vendor code | EKKO-LIFNR
    3 | Vendor name | LFA1-NAME1 * rule 1
    C. Rules:
    1 - select NAME1 from table LFA1 where LFA1-LIFNR = EKKO-LIFNR
    Hope this helps.
    Regards
    Eduardo Chagas

Maybe you are looking for