Functional/Technical Specs for RICEF object

Hey Guys,
Can anyone help me with the functional specs that you would have developed for Forms (Picking list, packing list, Shipping marks and bill of lading).
You can send me the poppulated templates.
Appreciate your help and quick response.
anupamkhushu@hotmail
Cheers!!
Anupam
Edited by: Anupam Khushu on Apr 17, 2008 3:45 PM

Hello:
you can find a lot of information on http://service.sap.com/instguides, under NetWeaver 2004 -> MDM
Also a lot of information is here on SDN. Just use the search funcionality
if you have other questions please don't hesitate to ask
Kind Regards
Alejandro

Similar Messages

NEED FUNCTIONAL/TECHNICAL SPEC FOR GL CONVERSION

Can someone please email me the functional and also technical spec for GL conversion. I need to give the functional spec to the Abaper to do LSMW.
Any advise and guidance in this regard will be greatly appreciated.
Please send me documentation on the spec sheet for gl conversion. I need to prepare one and give to the technical person by tomorrow. Email it to me at [email protected]
Please send me asap
thanks a lot
Lakshmi

Lakshmi, can you please send me the format of that func spec, if possible?

Re:Technical Specs for BI project respectively is-retail

Hi Gurus,
I am looking for some documents on Creating Technical Specs for BI project, as my prokect is in the initial stage.
Hence we require to collect relevant info for implementing the(respectively is-retail) FI-CO, SD & MM with BI project.
I will be assigning points.
My ID is: [email protected]
Thank you.
Regards,
Pradeep Kandepu
Edited by: pradeep kandepu on Jun 8, 2008 5:34 PM

Hi,
Check this link,
[Functional & Tech specs;
Hope this helps you.

Need some technical specs for practice

Can any body send me some sample technical specs for practice. My email id is [email protected] Thanks in advance
bindazme

Hi,
I m not sending you any sample for tech specs but you will
find the tips as below:
1.In 1st page you may require to give heading and company logo also at the RHS.
2.Give title of the document , SAP Module Name, Specification Type (Giv ein a tabular format)
3.Revision History in Tabluar Format including Author , Description , Date , Version ( Version management very imp try to maintain it)
4.Requirement Description : Enter in detail wat is u r reqmt.
5.U may add Process flow diagram using visio etc.
6.Outstanding issues
7.Prerequisites
8.Input Parameter Details
9.Processign logic Details
10.Out Put Details (if Report Output Format)
11.The few unit testing scripts also u can include
12.Proper file name , in header & Footer
13. Always try to keep track changes on for version management. If u need to create new version try to accept previous version then keep track for curren tchanges.
14. Maintain index & Page no in table content .
Kindly Reward points if contents are useful....
Rewards,
Mandeep.

Any functional spec or technical spec for MB5B report??

Guys,
Please send me any Functional Spec or Technical Spec of the standard SAP report with tcode MB5B ( Stock as on posting date). Any document explaining logic or technical flow is very much useful to me..I need to understand the logic and what are all the underlying tables used. I will assign more points to anyone who help me.

I got some help from the abaper.table/field details of the input screen and output screen
input screen
MATERIAL NUMBER       MARD     MATNR
COMPANY CODE      T001     BUKRS
PLANT                       T001W                    WERKS
STORAGE LOCATION     T001L     LGORT
BATCH     MCHB     CHARG
VALUATION TYPE     MBEW     BWTAR
MOVEMENT TYPE     MSEG     BWART
SPECIAL STOCK INDICATOR     MSEG     SOBKZ
SELECTION DATE     MKPF     BUDAT
output screen
STORAGE LOCATION     T001L     LGORT
MOVEMENT                     MSEG      BWART
MATERIAL DOCUMENT     MKPF     MBLNR
ITEM                                      MSEG     ZEILE
POSTING DATE                      MKPF     BUDAT
QUANTITY                                      MSEG     MENGE
PLANT                                       MSEG     WERKS
MATERIAL                                    MSEG     MATNR
In the input screen
i have three radio buttons :
         STORAGE LOC/BATCH STOCK
          VALUATED STOCK
          SPECIAL STOCK
and following checkboxes
WITH OUT OPENING STOCK,WITH OUT CLOSING STOCK(WITH MOVEMENTS)
WITHOUT OPENING STOCK,WITH CLOSING STOCK(WITH MOVEMENTS)
WITH OPENING STOCK, WITH OUT CLOSING STOCK(WITH MOVEMENTS)
WITH OPENING STOCK, WITH CLOSING STOCK(WITH MOVEMENTS)
WITH OPENING STOCK, WITH CLOSING STOCK: UNCHANGED(WITH MOVEMENTS)
WITH OUT OPENING STOCK,WITH OUT CLOSING STOCK(WITH OUT MOVEMENTS)
WITH OPENING STOCK,WITH CLOSING STOCK(WITH OUT MOVEMENTS)
can you help me in understanding which field in what table should be taken
into consideration if need to implement the above radio button or check box.
For example if the user clicks on "WITH OPENING STOCK,WITH CLOSING STOCK(WITH OUT MOVEMENTS)"   checkbox
what is the linking field which i should restrict my logic to ?
It would be helpful if you can give me atleast some information that you have ..

Technical spec for Project systems report

Hi all,
My requirement is to create technical spec's on this Project Systems monthly and yearly budget and actual tracking with drill down capability
And the char and KF are:-
Char
Project Definition
WBS Element
Cost Element
Vendor
Purchase Order No.
Purchase Order Item
Requester
Created On
PO Description
Final Delivery
KF
PO Value
Value - Quantity Delivered
Amount Invoiced
To be invoiced - Value
To be Delivered - Value
Can anyone help me that which standard query is suitable for this requirement.

Hi,
Check the below business content queries:
0PM_MC01_Q0001     Budget Comparison (Actual Costs)
0PM_MC01_Q0002     Budget Comparison (Planned Costs)
0PM_C06_Q0002       Budget Proposal (Periodic)
0PM_C06_Q0003       Budget Proposal (Objects)
Check this might be useful:
http://help.sap.com/saphelp_nw2004s/helpdata/en/e8/858f40f5767d17e10000000a1550b0/frameset.htm
Hope this helps.......
Rgs,
Ravikanth

Template Technical Spec for a Dialog Program

Hi guys,
I need a template for a technical spec of program using the screen painter (an example would be very welcome as well), can any one send me some dox about this? my email is [[email protected]] .Thank you

Hi Sachin,
Actually I have not been able to find one, that's why i posted this message, so if you have some URLs where i can find what am looking for can you post them please? Thanks

Technical Specifiaction for the ABAP HR Functional Spec

HI Please help me to write a technical spec for the below functional spec.
As-Is Business Process
Duplicate Performance, Development and Career Plans are being created. Forms have been created with incorrect validity dates. Some people that should have forms dont and some that should not have forms do. We have no easy way to periodically audit for these situations.
To Be Business Process
Audit report to be run via the SRET report tree to check for duplicate plans, incorrect validity dates, and actives that are missing forms as well as terms that have forms that are not in completed status.   Should be able to save selections as a variant.
Selection Screen
Use selection screen from YAUMI tcode as a base model. We only need the top bar, the selection section,, and a section for invalid data edits, which will be modified as shown below. Additionally, there should be a section to choose templates.
Template section:
      This section can be modeled after the selection screen in program Y_HRHAP_PDPGEN. Each template is selected via drop down, and the plan end year is entered. Drop down to choose template that shows form name. For development and career, the expected end year is 9999, which would be entered in the year for those 2 templates. For the Performance plan, the current year is the end year, and would be entered.
Invalid Data Edits section:
   Checkboxes for:
1)     duplicate plans
2)     invalid validity dates
3)     missing plans for active
4)     terms with non completed plans
Logic
     Include the templates selected above for associates with the chosen selections.
     If duplicate plans checkbox is selected
            If the plan year end on the screen is 9999, see if there is any associate that has more than one of this template in status not equal to Complete. If so, output to audit report.
            If the plan year end on the screen is less than 9999 (i.e. 2007), then see if there is any pernr that has more than one of this template in a status that is not equal to Complete with an validity end date of 12/31/yyyy (where yyyy is the year on the selection screen). If so, output to audit report.
     If invalid validity dates is selected
        If the plan year end on the screen is 9999, see if there is any pernr that has that template in status not equal to Complete with an end date not equal to 12/31/9999. If so, output to audit report.
            If the plan year end on the screen is less than 9999 (i.e. 2007), then see if there is any pernr with that template in status not equal to Complete with an end date = 12/31/9999, or with an end date with a month and day not equal to 12/31. If so, output to audit report.
     If missing plans for active is selected
     See if there are any people in the selected population that do NOT have any of the selected templates in a status not equal to Complete If so, output to audit report.
      If terms with active plans is selected
     See if there are any people in the selected population that DO have any of the selected templates in a status not equal to Complete If so, output to audit report.
Output
      Appraisee Pernr
      Appraisee Name
      Template name
      Validity Dates begin date and end date
      Status / Substatus
      Appraiser Pernr
      Appraiser Name
      Message :
          Duplicate plan
          Invalid Validity End Date
          Missing plan
          Plan not completed.
      For missing plan error, the fields for validity dates, status/substatus, appraiser pernr and appraiser name will be blank.
Thanks
Raja

Hi IB!
Please check the following links for docu:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/80/ea89395eb58c4f9d0c3e837cf0909d/frameset.htm
Check this for ESS:
/people/srinivasarao.gv2/blog/2005/06/11/configuring-ess-in-sap-enterprise-portal-60
I hope it was in time!
Have a nice day!
Best regards,
Zsolt

Functional specs for Hierarchies

Hello GURUS,
Please any one provide me functionalspecs and Technical specs for Hierarchies.
Thanks,
Sekhar.

Hi Utpal,
Welcome to SDN,
Being a newcomer to forum before posting the thread read the forum rules,you are asking to send the details to your mail which is forbidden by the forum.
Coming to the thread Customer Hierarchies stored in table KNVH,go to SE16N give the table KNVH get valid inputs and build
valid logic.
Regards
Ram

Tech Spec for complex transaction

Hi,
I need to prepare technical spec for a complex custom transaction , the functionality of the transaction is like any standard transaction VA01 , MM01. its new development. If any one has technical spec for such type of developemnt , please forward to me.
Thank you.

Hi,
I need to prepare technical spec for a complex custom transaction , the functionality of the transaction is like any standard transaction VA01 , MM01. its new development. If any one has technical spec for such type of developemnt , please forward to me.
Thank you.

Where can I find technical spec on the old wireless keyboard, M9270LL/A?

I bought an old wireless Apple keyboard, M9270LL/A. Does anyone know where I can find a manual or technical spec for this keyboard? Thanks.

One of the manuals here: http://support.apple.com/kb/index?page=search&src=support_site.home.search&local e=en_US&q=M9270LL%2FA will have the specs.

URGENT..... NEED TECHNICAL SPECS DOCS PLEASE

HI ALL,
CAN YOU PLEASE SEND ME THE TECHNICAL SPECS DOCS PLEASE.
URGENT AND THANKS VERY MUCH IN ADVANCE
V VADLAMUDI

Hi venu,
If you specify exact problem then our forum people can help you... but not like this..here you wont get any specs.....
Try the link below and download ASAP documentation or Roadmap. There are many kinds of template.
www.service.sap.com/bi
Follow:
->Services & Implementation -> SAP BW ASAP
and also see these previous threads
BW Technical/Functional Spec Template Neeed
Functional/Technical Specs document
/thread/56195 [original link is broken]
thanks
@jay

Need of Technical specs BDC of transaction xk01

Hi Experts,
This is Geet, I need the technical specs for BDC of transaction XK01. Please reply me as soon as possible.
Thanks a lot

Hello Mr.MVPhani Diwakar,
Are really mentoring people over here!!! What a sarcastic reply. If you are not CAPABLE of something you better quit. You don't know what is teaching, mentoring or atleast helping other who is in need of. You better sit at home, this is NOT your kind of job.
Thank you.

How to prepare functional specs? and technical specs?

Hi All,
How to prepare functional specs and technical specs
please send me if u have any documents at [email protected]
Thanx in advance,
Ravi Alakuntla.

Hi again,
Take a look at a possible 'Table of Contents' for a Functional Specification document. This a generic - All the items need not be filled in all the time. The key items are 2, 3, 4, and 9. If you do not have template, you may create a template in Word.
1     Reference to Development List
2     Description of Business Process
3     Justification
4     Functional Design
5     Assumptions / Notes
6     Authorization Specifications
7     Transactions
8     Layout and Data Mapping
9     Unit Test
9.1     Unit test
10     Technical Specification
10.1     Program Category:
10.2     Program details
10.3     Authorization Objects
10.4     Custom Tables
10.5     Custom Transaction Codes
10.6     Custom Menus
11     Programmer Comments
BR/
Mathew.

How to convert Functional spec to Technical spec

Hi ABAPer's
    Pls Sought me out, how generally the functional spec can be converted into technical spec.(provide me steps).
thanks in advance
Swathi

every project/company has its own Template for FS, TS etc...
Take the TS template, u can see many contents in that.
FS in the Functionality of the requirement.
TS is the Technical solution for that requirement.
u need to write the Pseudocode in the TS, how can you implement the technical solution for the requirement into its corr. content or paragraph.
generally any TS consists of the foll: as its content:
(this is an example for a report)
1. DETAIL DESIGN SPECIFICATIONS OVERVIEW
   a. BUSINESS FUNCTIONALITY
b .MAJOR FEATURES
USER PROCEDURES
CHECK LISTS
ASSUMPTIONS:
CONSTRAINTS:
SECURITY CONSIDERATIONS
OBJECTS:
LTS SECURITY REQUIREMENTS:
RESTART/RECOVERY STRATEGY
PERFORMANCE CONSIDERATIONS
PROGRAM & DATA FLOW INTERACTION
PICTORIAL VIEW
INPUT DATA
COMMENTS
2. DETAILED PROGRAM DESIGN SPECIFICATIONS
PROGRAM DESCRIPTION
EXECUTION METHOD
PROGRAM TYPE
COMMON SUBROUTINES
EXCEPTIONS TO PROGRAMMING STANDARDS
LIST OF OBJECTS IMPACTED
INPUTS / OUTPUTS
ERROR MESSAGES AND CLASSES
BDC SESSIONS
STRUCTURES
DETAILED LOGIC
3. DETAILED REPORT DESIGN SPECIFICATIONS
(REPORT PROGRAM NAME)
REPORT DESCRIPTION
REPORT INVOCATION METHOD
REPORT APPLICATION
REPORT TYPE
REPORT CLASSIFICATION
REPORT MEDIUM
REPORT FREQUENCY
REPORT REQUEST METHOD
REPORT TIMING
REPORT ORIGINATOR
REPORT RECIPIENTS
REPORT PROCESSING ENVIRONMENT
REPORT LAYOUT
REPORT LAYOUT DESCRIPTION
REPORT SORT INFORMATION
REPORT CONTROL BREAKS
REPORT PAGE BREAKS
REPORT SUMMARY STATISTICS
REPORT MESSAGES
REPORT NUMBER OF PAGES / LINES / COPIES
REPORT PRINTING INFORMATION

Functional/Technical Specs for RICEF object

Similar Messages

Maybe you are looking for