Functionality in SIEBEL 7.7 and 7.8.

How to find out new vanilla functionality in SIEBEL 7.7 and 7.8.

On second thought, the Statement of Direction is easier to read, but the SOD is not a guarantee that the actual product will be like they annonced it.

Similar Messages

I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have reduced functionality what it this about and how do I get my product back

I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have reduced functionality what it this about and how do I get my product back

Hi there
I have version 5.7 and every time I opened it I was told that updates are available and to click on the icon to access these. Instead it just took me to the
adobe page with nowhere visible to update. I then sought to download lightroom cc and this is when I could not access the 'develop' section due to reduced
functionality It was apparent that my photos had been put in cc but no way to access them unless I wanted to subscribe.
I have since remedied the problem as my original lightroom 5.7 icon is still available on the desktop and have gone back to that. I do feel that this is a bit
of a rip off and an unnecessary waste of my time though.
Thank you for your prompt reply by the way.
Carlo
Message Received: May 04 2015, 04:52 PM
From: "dj_paige" <[email protected]>
To: "Carlo Bragagnolo" <[email protected]>
Cc:
Subject: I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have
reduced functionality what it this about and how do I get my product back
dj_paige created the discussion
"I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have reduced functionality what it
this about and how do I get my product back"
To view the discussion, visit: https://forums.adobe.com/message/7510559#7510559
>

Problem with Edit IN function between LR 2.3 and PS CS3

I recently upgraded my system to a Windows Vista 64 bit Core 2 Quad with 8 GB. Lightroom now works and loads images the way it should. I do have one major concern and need any help possible.
I am using LR 2.3 in 64 bit and PS CS3 ver 10.0.1 (which is 32 bit - loads slowly but otherwise works fine). The problem I am encountering is in LR Develop / Photo / Edit In... - using any of the menu items:
"Edit in Abode Photoshop CS3"
"Open as Smart Object In Photoshop"
"Merge to Panorama in Photoshop"
"Merge to HDR in Photoshop"
"Open as layers in Photoshop"
Photoshop opens but no image(s) are exported and I receive the message in LR - "The file could not be edited because Adobe Photoshop CS3 could not be launched."
Photoshop, however, was launched but no image exported and so I can't work on the image in PS. The appropriate TIFF image is created in LR for the first two menu items - nothing for the last three menu items.
I can create a partial work around by setting PS as an external editor, however, I can't use 4 of 5 of the menu items.
All the menu items work fine in Windows XPpro.
Any help is much appreciated.
PS I also tried the most recent Window 7 RC with exactly the same results.
Thanks
Bob

Don
I wasn't shouting - I just cut and paste the exact text and font in its original size and type as was shown in the message. Never had a thought that someone would be offended by cutting and pasting exactly what was in a message - it would appear that John Williams saw it for what it was.
However, sorry if I offended you.
Bob
Date: Mon, 1 Jun 2009 19:15:15 -0600
From: [email protected]
To: [email protected]
Subject: Problem with Edit IN function between LR 2.3 and PS CS3
There is no reason to shout. There are only other users here trying to help.
>

Function module for calculating planned and actual cost of production order

Hi ,
Do we have any standard function module for calculating planned and actual cost for production order?
i need to implement this in a Z-report.
Thanks
Srini

Hi,
try below function module
CRMCO_GET_PLAN_ACTUAL_COSTS
CO_IH_GET_PLANNED_COSTS_TOTAL
Regards,
Sankaran

How to check for a function module with its description and functionality

Hi all,
How to check for a function module,with its description and its functionality,in detail how can I know the purpose of a particular function module,how to search for a function module which suits my requirement .

Hi,
You can search a FM of your requirement by putting in the Key words and searching for a FM. Like * KEYWORD * and then pressing F4.
Say for example you need to search something regarding converstion.
Search for * CONVERT * and press F4.
If there is something specfic like converting date to something you can give
DATE * CONVERT *
OR
CONVERT * DATE * and press F4.
Once you narrow down your search you will have a Function module documentation inside the Function module. Please note that all the FMs willl not have documentation.
Regards,
Pramod

How to remove the sort function on the drill down and then save

how to remove the sort function on the drill down and then save in the change local view of the Query
Is it possible to change the porperties of any characteristic in the local view and then save?
If so please post the answer.

I do not think that option is possible.
Regards,
Venkata Boga.

Getting value from Function stored in a schema and Watching the value of objects

hi
i'd like to display a labelA which is from a query -> (SELECT NAME FROM TABLE1 WHERE NAME = GetA). GetA is a function which I created in SchemaA. GetA returns a varchar2. In this case.. how can i do that ?
should i write the PL/SQL in the format trigger of this labelA ? if yes, then what should i write in the PL/SQL format trigger ? or should i create another query in Data Model ?
And how do get hold of this labelA's value(or the result returned by the query) in the parameter form?
And lastly is there a way to trace the value of some report objects ?
should i use SRW.MESSAGE ? to print out the 'watched' value ? or any other alternatives ?
what is the url that takes me to learn all these ?
I got this error "REP-1401: 'beforepform': Fatal PL/SQL error occurred." when i initialize the bind variable to a function (GetA)stored in Schema A ---> :P_A := GetA in the before_parameter_form of report trigger;
anything wrong with the above assignment ?
are there any difference between stored procedure like function, package in the database and those in in PL/SQL Library of report builder ???
null

hi
i'd like to display a labelA which is from a query -> (SELECT NAME FROM TABLE1 WHERE NAME = GetA). GetA is a function which I created in SchemaA. GetA returns a varchar2. In this case.. how can i do that ?
should i write the PL/SQL in the format trigger of this labelA ? if yes, then what should i write in the PL/SQL format trigger ? or should i create another query in Data Model ?
And how do get hold of this labelA's value(or the result returned by the query) in the parameter form?
And lastly is there a way to trace the value of some report objects ?
should i use SRW.MESSAGE ? to print out the 'watched' value ? or any other alternatives ?
what is the url that takes me to learn all these ?
I got this error "REP-1401: 'beforepform': Fatal PL/SQL error occurred." when i initialize the bind variable to a function (GetA)stored in Schema A ---> :P_A := GetA in the before_parameter_form of report trigger;
anything wrong with the above assignment ?
are there any difference between stored procedure like function, package in the database and those in in PL/SQL Library of report builder ???
null

Function to convert PO quantity and cancelled quantity into Primary UOM

Hello,
I am looking for a function to convert PO quantity and cancelled quantity into its Primary UOM from the unit of measure the line order was placed.
Thank you

hi
In case if you are already working in production remember that decimal places should not change. It will affect all previous data.
For your problem best solution is make order unit as 1000. So that your problem will solve
e.g. instead of 2.009 inr for 1 Unit use 2009 inr for 1000 unit.

Bought a Mac Mini. at 18 day's old it started to lock up and not function. Took it in and they wiped and reinstalled it. Well at 24 day's old it's been sitting in the box not being used. First and last Mac for me. But can I get something for the junk?

I have pulled it out of the box and put 2 Mac approved mem sticks in it to boost it to 8 Gigs mem and it still locks up and freazes.. So many people told me Mac was the way to go... 1500 dollers could have bought me a great pc laptop. Now I have a wirless mouse keyboard and a mac mini (aka Brick) that allowed me to donate money to a cause that is helping buildings and companies out side of the US. While I have junk.. It's still under warranty and I reinstalled the os after the new mem sticks. Again.. locks up and does nothing. What can I do with this? Toss it in the trash? Any info on what I might do with it.. Please help!

It would be most helpful if you updated your system information:
Please reconcile the following
at 18 day's old it started to lock up and not function. Took it in and they wiped and reinstalled it. Well at 24 day's old it's been sitting in the box not being used.
... I reinstalled the os after the new mem sticks.
If your Mini is anything less than six months old it would be running Lion, not 10.6.1, nor would it have been necessary to "reinstall the OS". Any help that anyone can provide is predicated on your system configuration so it's important.
If you are running Lion then boot your Mini while holding the D key. This will load Apple Hardware Test which will enable you to test your memory. "Mac approved" memory is sort of vague, and even memory that is allegedly designed to meet your Mini's specification may fail. There few reputable memory vendors.
"Apple installed" memory is more meaningful, and indicates Apple has tested it and guarantees its function. Otherwise all bets are off with a claim of "Mac approved". You will have to verify that yourself with Apple Hardware Test.
If your Mini was running, or ever ran OS 10.6.1 for that matter, it is close to three years old.
You must clear up these uncertainties before anyone can help.

Has anyone had a problem with TapMedia File Manage on iPhone 5. I reported a WIFI functionality problem to the developer and asked for support. Instead they have been very unprofessional by name calling me instead of logically evaluate and troubleshoot th

Has anyone had a problem with TapMedia File Manage installed on iPhone 5? I reported a WIFI functionality problem to the developer and asked for support. Instead the company has been very unprofessional by name calling me instead of logically evaluate and troubleshoot the problem

Hi AKE1919,
Welcome to the Support Communities!
The following information should help you with this:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/HT1933?viewlocale=en_US
Cheers,
Judy

RFC enabled function module for insert update and delete in a Ztable..

friends..
Is there any standatd RFC enabled function module to insert , update and delete data in a custom database-table (Ztable)? if not how can we create it? plz give me the details steps..
what are the import, export parameters and how to develop and process it.. (for example: suppose fields in the table is Emp_Id, Name, Address)
Thanks and Regards

Hi,
Try this code.
REPORT ZMMC071Z_RMV.
TYPE-POOLS : ABAP.
FIELD-SYMBOLS: <DYN_TABLE> TYPE STANDARD TABLE,
               <DYN_WA>,
               <DYN_FIELD>,
               <LV_CONDI>.
DATA: DY_TABLE TYPE REF TO DATA,
DY_LINE TYPE REF TO DATA,
XFC TYPE LVC_S_FCAT,
IFC TYPE LVC_T_FCAT.
SELECTION-SCREEN BEGIN OF BLOCK F1 WITH FRAME TITLE TEXT-001.
PARAMETERS: P_TABLE LIKE DD02L-TABNAME OBLIGATORY.
SELECTION-SCREEN END OF BLOCK F1.
Evento: At Selection Screen                                          *
START-OF-SELECTION.
PERFORM GET_STRUCTURE.
PERFORM CREATE_DYNAMIC_ITAB.
PERFORM GET_DATA.
END-OF-SELECTION.
*& Form get_structure
text
FORM GET_STRUCTURE.
DATA : IDETAILS TYPE ABAP_COMPDESCR_TAB,
XDETAILS TYPE ABAP_COMPDESCR.
DATA : REF_TABLE_DES TYPE REF TO CL_ABAP_STRUCTDESCR.
DATA VL_LENGHT(30).
Get the structure of the table.
REF_TABLE_DES ?=
CL_ABAP_TYPEDESCR=>DESCRIBE_BY_NAME( P_TABLE ).
IDETAILS[] = REF_TABLE_DES->COMPONENTS[].
LOOP AT IDETAILS INTO XDETAILS.
    CLEAR XFC.
    XFC-FIELDNAME = XDETAILS-NAME .
    XFC-DATATYPE = XDETAILS-TYPE_KIND.
    XFC-INTTYPE = XDETAILS-TYPE_KIND.
    XFC-INTLEN = XDETAILS-LENGTH.
    XFC-DECIMALS = XDETAILS-DECIMALS.
    APPEND XFC TO IFC.
ENDLOOP.
ENDFORM. "get_structure
*& Form create_dynamic_itab
text
FORM CREATE_DYNAMIC_ITAB.
Create dynamic internal table and assign to FS
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
    EXPORTING
      IT_FIELDCATALOG = IFC
    IMPORTING
      EP_TABLE        = DY_TABLE.
ASSIGN DY_TABLE->* TO <DYN_TABLE>.
Create dynamic work area and assign to FS
CREATE DATA DY_LINE LIKE LINE OF <DYN_TABLE>.
ASSIGN DY_LINE->* TO <DYN_WA>.
ENDFORM. "create_dynamic_itab
*&      Form get_data
      text
--> p1        text
<-- p2        text
FORM GET_DATA .
*Get data from p_table into internal table <DYN_TABLE>
SELECT * INTO TABLE <DYN_TABLE>
      FROM (P_TABLE)
Here you can implemente function DELETE, INSERT.
ENDFORM.                    " De_para

Ipad 2 screen is black . when i press the power button it takes a screen shot but i have no functionality . tried holding the home and power button together but the screen just flicker and stay black . no apple icon shows up. help please

ipad 2 screen is black . when i press the power button it takes a screen shot but i have no functionality . tried holding the home and power button together but the screen just flicker and stay black . no apple icon shows up. help please

Make sure it is charged for about 10min using the adapter, then connect in recovery mode, explained in this article:
If you can't update or restore your iOS device

Functional specifications for AP, AR and GL

Hi SAP Gurus,
I am new consultant. Can anyone help me with the functional specifications for GL, AP, and AR.
Please mail me the specifications at [email protected] Thanks in advance
Ramesh

Hi
pl find this link which might be useful
http://www.mojofat.com/tutorial/
Assign points
Zia

What are the functional differences between the iPhone and the iPod Touch, barring of course the differences in service requirements.

What are the functional differences between the iPhone and the iPod Touch, barring of course the differences in service requirements.

For one, their form factors are slightly different as the iPhone has a bit more squarish body whereas the iPod Touch has a tapered back to it.
The iPhone also has much better front and rear cameras. Exact details as to the difference in megapixels depends on whether or not you talking about the iPhone 4 or 4S. If you would like to get more details, you can always view
each models specs on Apple's online store.
See here for a better explanation.
http://en.wikipedia.org/wiki/IPod_Touch#Comparison_to_the_iPhone
I'm sure others will chime in with other things as well.
B-rock

In Material Master Screen,functionally what is Safety time and safety time

In Material Master Screen,functionally what is Safety time and safety time indicator in the MRP Screen.Pls explain its functionality

Hi,
The safety time / actual range of coverage ensures that the planned warehouse stock covers the requirements of a defined number of days. It therefore serves as a time float and thus works alongside the safety stock, which acts as quantity float.
The system simulates bringing the requirements forward by the specified number of days and the planning for the receipts, created for these requirements in the planning run, is also brought forward by this number of days.
Prerequisites
·   You have set the Safety Time indicator in the material master record (MRP 2 View) to define whether the safety time is only to apply to independent requirements or to all requirements.
·    In the material master record (MRP 2 View), in the Safety Time/Actual Range of Coverage field, you have entered the number of workdays by which the requirements are to be brought forward.
·    If, in addition to this actual range of coverage, you also want to define a different number of workdays in certain periods or a safety time less than one day then, in Customizing for MRP in the activity Define Period Profile for Safety Time/Actual Range of Coverage you can define a period profile and assign it to the material in the material master record.
Regards,
Vijay

Functionality in SIEBEL 7.7 and 7.8.

Similar Messages

Maybe you are looking for