Functionality of cancel,reject,back

friends let me know the  functionality of cancel,reject,back keywords.

Hi,
   BACK : statement positions the list cursor on the first position of the first line in a logical unit.
   CANCEL: There is no key word cancel.
   REJECT: The REJECT statement exits the current GET event block of an executable program. If you do not specify node, the runtime environment responds as described in Exiting Processing Blocks.
The REJECT statement always refers to the current GET event, not to the location where it is executed. If you call a procedure in a GET event block, and the REJECT statement is executed there, the calling event block is affected.
for more details:
  This statement positions the list cursor on the first position of the first line in a logical unit. There are the following logical units in a list:
A line block defined with RESERVE.
If BACK is executed after the RESERVE statement, the list cursor is placed in the first line of the current line block.
The lines within a self-defined page header.
If BACK is executed within the event block for TOP-OF-PAGE and is not placed after RESERVE, the list cursor will be positioned in the first line underneath the standard page header.
The lines of a page underneath the page header.
If BACK is executed outside of the event block for TOP-OF-PAGE and not after RESERVE, the list cursor will be positioned in the first line underneath the page header.

Similar Messages

  • Functionality of cancel,reject,back keywords.

    friends let me know the  functionality of cancel,reject,back keywords.

    hi raja,
    BACK.
    Effect
    Returns output position to the first line of the current page after the TOP-OF-PAGE processing.
    REJECT.
    Effect
    This statement exits a GET event block when processing logical databases in executable programs.
    Stops processing the current database table line provided by the logical database and resumes with the next line of the table on the same hierarchy level. Unlike the CHECK statement, REJECT is not context-sensitive but always leaves the current GET event block.
    'cancel ' button would be "leave program",
    award points if useful.
    regards,
    deepthi reddy

  • My phone was stolen, I have moved it in lost mode,but I can see that whoever has it,is changing phone name and can use it until I activate lost mode again.Can I do it permanently? How can I cancel ICloud back for the stolen phone,it blocks Cloud memory?

    My phone was stolen, I have moved it in lost mode,but I can see that whoever has it,is changing phone name and can use it until I activate lost mode again.Can I do it permanently? How can I cancel ICloud back for the stolen phone, as I cannot delete the stolen phone backup (says that backup is being in use) and this is keeping memory occupied in the Cloud and I cannot back-up the other devices.

    http://support.apple.com/kb/ht2526

  • Deactivating function key "Cancel" in standard transaction me38

    Hi,
    I need to deactivate standard function key cancel in a screen in me38,...
    Is it possible through any exit ?? if yes please explain in detail ...or will i have to modify the gui status using access key?
    Thanks in advance.
    Regards,
    Kashyap.

    Hi,
    I dont think that there are any Function exits/ BADI's that would meet your requirement.
    But you can try using the Include MM06EO0P_PF_STATUS of Program SAPMM06E. The PF Status for each screen is set here based on certain condition checks.
    In this include there are a number of Enhancement Points. You can find the suitable Enhancement Point here and write your code in it. Or else you could also find a suitable Implicit Enhancement and write your code in the Implementation.
    If you can mention the exact screen in which you need to disable the csncel button, then I might be able to suggest the correct Enhancement Point/Implicit Enhancement.
    To remove a button or exclude a function code you have to populate the function code for that particular function/button in the structure EXCL. I think that the function code for cancel button in ME38 is 'XIT'.
    So your requisite code would look something like this
    excl-funktion = 'XIT'.
    APPEND excl.
    Hope this helps.
    Regards,
    Abhisek.

  • BlackBerry to bring back function keys to win back former fans

    From the Globe and Mail
    BlackBerry to bring back function keys to win back former fans
    BlackBerry Ltd. is seeking to win back once-devoted customers by bringing back a popular set of command keys that the company had abandoned with the launch of a new family of smartphones this past year.
    Sources familiar with the company say chief executive officer John Chen will announce Tuesday at a mobile industry conference in Barcelona that the Waterloo, Ont.-based company will restore its trademark “belt” of five function keys that sat between the screen and keyboard.
    This includes a trackpad and other keys that allowed users to easily navigate between different applications. The belt will appear later this year on phones powered by the BlackBerry 10 operating system.
    A company spokesman declined to confirm the announcement. In a recent interview, to be published later this week in Report on Business Magazine, Mr. Chen said that future BlackBerry 10 smartphones “will have some of the features our power-users love” but were not included on the first phones launched a year ago on the platform, the all-touchscreen Z10 and the Q10, which features both a keyboard and touchscreen.
    (more at the link above)
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

    Will it be a year or more?
    Or will they adapt known yet to be released hardware with the belt of buttons?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Function Module to Reject PO Release

    Hello All,
    One can reject a PO Release using ME29N, does anybody know of a function module or sequence of function modules to achieve this ? The only BAPI available is for Release, but I couldnt find anything on rejecting release.
    I havent tried a BDC, not sure if it will work with Enjoy Screens. Any experiences ?
    Regards,
    Parag.

    As per standard SAP practice, rejection is only possible for Purchase Requisitions only. Your requirement is called as release cancel.
    There is only one function module available for both release and cancel and you can make use of the same:
    EXIT_SAPLEBNF_005
    Thanks,
    Shree

  • Job cancel in back ground

    Hi all,
    i have processed a job in back ground job scheduling.
    But i want to cancel it using t.code SM36.
    I have seen that there is delete button, which is not suitable to cancel.
    Can anyone help in this regard.
    Thanks in advance
    Venkat

    Dear Venkat
       If the job is in active state. Go to SM37 -> Selecet the respective Job -> Ctrl+F1 or you can click on STOP button in application tool bar.
       Similary you can delete job using Shift_F2
    Thanks
    Eswar

  • Cancelling Rejected Items in DP90

    Hi SAP Gurus,
         Is there an easy way to reverse/cancel items that have been rejected in RRB DP90 ??
    Look forward to any help
    Ross

    Hello
    you could check this excellent document on OSS , which gives the options for the cancellation amongst other complete documentation for config scenarious
    Note 301117 - Enhanced documentation for dynamic item processor
    other notes whihc might help you are
    523743
    561033
    Hope this helps
    Thanks
    akasha

  • Sending rejection back to vendor

    Hi,
    In case of rejection, after usage decision (mvt 122) material is to be send back to vendor. Which T-code is to be used to print delivery challen / hard copy to send with rejected material ?

    Hello,
    If you are under excise then you have to send all the material against excise challan.
    For this use transaction J1IS to print excise invoice
    for this use MATD as ref document and use material document which is from mvt type 122.
    Fill all the details in this transaction like excise values.
    Regards
    Kedar kulkarni
    Message was edited by:
            KEDAR KULKARNI

  • HT5295 changing function of next and back buttons on podcast app

    is there a way to set the next or back functions to skip ahead or back 15 or 30 seconds?  So instead of going to the next track, when i would press the next button on a bluetooth device, the podcast would skip 30 seconds.

    No.

  • Sales order cancel / reject date

    Dear all ,
    I need to know the Sales Order cancel date or rejection date if the sales order is been cancelled.
    Where can i get this date from ,which table?
    VBAK or VBAP?
    Please advice.
    Thanks,Swati

    hi,
    we can check the status of the sales order using the following table and fields.by checking the status we can get the dates also.
    VBUK-ABSTK.
    this is at header level
    VBUP-ABSTA
    this is at item level
    regards
    muthuraman.d

  • Error with "Open/Create/Replace File" function with cancel button

    I've attached a very simple VI that embodies what I want to do with my Open File function. I simply want to stop the rest of my program (theoretically encased in the Case Structure) from running if the user deigns not to specify a file location.
    However, if the Cancel button is clicked an error is produced before the rest of the program runs. If you ignore the error and continue, the "cancelled' variable is appropriately made true and the Case Structure runs properly. I simply want to remove the error message LabView gives me.
    Any ideas on why or how?
    Solved!
    Go to Solution.
    Attachments:
    Open file test.vi ‏34 KB

    The cancel button gives you error code 43 (if I remember correctly). After your file vi's, use the general error handler (GEH) to clear this error (and no other errors). Use
    [exception action]=Cancle Error on Match
    [exception code]=43
    type of dialog=no dialog
    Felix
    www.aescusoft.de
    My latest community nugget on producer/consumer design
    My current blog: A journey through uml

  • I have mozilla on Mac os x, The "Back" function for to go back at a previous page doesn't work. WHY?

    I have mozilla on Mac os x for about 8 months. The "Back" function, to go back on a previous page doesn't work, the "Back" arrow remains grey coloured, so it can't be pressed like when it's black coloured. It gets you tired to reopen pages all the time. WHY does this happen?
    == This happened ==
    Every time Firefox opened
    == I first downloaded mozilla.

    Go here to download Firefox 3.6:
    http://www.mozilla.com/en-US/firefox/all-older.html

  • Data cancellation / roll back

    Hi,
    We have a scenario wherein SAP PI posts certain number say 10 Material Master Data to SAP from external system, so during process if first five materials out of 10 are posted and error appears for sixth material, then is it possible to cancel all previous 5 postings also.
    Please suggest
    Thanks in advance.

    Divya,
    Thanks that was very helpful.....that will definitely work if you are pushing data to SAP which is independant of each other.
    But in our case, I will further explain our situation...
    in our scenario we have to create 10 materials say A1,A2 .... A10 , and 2 Boms say A9 and A10
    A9 BOM contains items A1,A2..A6
    and A10 BOM contains items A7,A8,A9
    Now when i trigger upload say 10 materials are created, then BOM for A9 is also created
    but if while creating BOM for A10 some error happens, so in that scenario requirement is all 10 materials and  BOM for A9  which was created should be rolled back/removed from system.
    Please suggest
    Thanks in advance

  • Trying to add functionality for Approve/Reject a request

    Hi,
    I'm using Oracle OIM 11g, currently I need to add the functionality to Approve or Reject a given Request through API. I have gone through the following classes in "*Oracle Fusion Middleware Java API Reference for Oracle Identity Manager 11g Release 1*":
    1- oracle.iam.request.api.RequestService
    2- oracle.iam.request.vo.Request
    Nothing was available in the above classes to help add Approve or Reject functionality.
    Can somebody please help me out on how to Approve or Reject a Request through API. It would be really help full if somebody who has implemented this functionality can please post the code or any help full links etc.
    Thanks in advance.
    Regards,
    Arjun Choudhury

    No probs buddy. Just as a thumb rule all approvals are managed by soa/bpel and in OIM its just a link to that task in soa. So any custom code for approvals would have to be done via bpel apis.
    Try your hands and let us know if you face any specific issue. I have worked a bit on these and would be glad to help.
    -Bikash

Maybe you are looking for

  • Missing CO Sales Order Item in 643 Cross Company Movement

    Hi all, we are working in a make-to-order scenario in which the company A/plant A sells a finished product produced by company B/plant B. The sales order item is a cost object (account assignment category E – "Ind. cust. w. KD-CO" is set in the requi

  • Error "Object refernce not set" when using http context in Eventreceiver for Document Library,

    Hi, Httpcontext returning null values when I used in item adding event of document library. I have a document set home page which has document set properties(by default) and one OOTB document library is placed in the same page.When user clicking on u

  • Works on Windows but timeout on linux

    I have a problem with the code below. It perfectly works under Windows, but I am getting a timeout under Linux. I am not sure why. Any ideas? One more thing: Under Liunx It fails when I am testing it using port 1935. However, if I test it with port 1

  • How do you run alien arena on leopard?

    I downloaded the linux version and the mac os x patch but I can't install or run the game at all and the read me is in spanish. Any help would be greatly appreciated. Thanks in advance

  • Inner join-select -primary key in table issue

    Hi ,         Iam using FEBKO(header) and FEBEP(item) in inner join  select .But the datas fetching by this selct in not correct.The analysis is the is no common primary fields in the both table. Question 1-> Can i use inner join without common primar