Functionality Questions With Respect To OSS Hint 1009567

Hello,
we are to develop a print job and are thinking about using adobe interactive forms technology .
Nevertheless, we are a bit reluctant, as reading the OSS hint 1009567 which states the functional differences between SAP interactive forms and smart forms we are not sure whether the following required functionality would be covered by SAP Interactive Forms.
It would be great if someone would be able to tell us whether the following requirements can be met using SAP Interactive Forms within a print job, i.e. ABAP level, no use of Web Dynpro :
- total amount of pages:
The information of the total amount of pages of a print out is needed on the first page as it needs to be encoded within a barcode
on the first page (refering to OSS hint 1009567 nr 1)
- count copies
It must be possible to count copies, is this possible? (refering to OSS hint 1009567 nr 3)
- Styles
Furthermore I have some questions to hint 1009567:
-within nr 4 it is stated that final windows are not supported. What are final windows?

sorry, I was not yet finished and somehow posted the message accidentally: Here now the complete version
Hello,
we are to develop a print job and are thinking about using adobe interactive forms technology .
Nevertheless, we are a bit reluctant, as reading the OSS hint 1009567 which states the functional differences between SAP interactive forms and smart forms we are not sure whether the following required functionality would be covered by SAP Interactive Forms.
It would be great if someone would be able to tell us whether the following requirements can be met using SAP Interactive Forms within a print job, i.e. ABAP level, no use of Web Dynpro :
- total amount of pages:
The information of the total amount of pages of a print out is needed on the first page as it needs to be encoded within a barcode
on the first page (referring to OSS hint 1009567 nr 1)
- count copies
It must be possible to count copies, is this possible? (referring to OSS hint 1009567 nr 3)
- Styles
Is there really no possibility to define styles that can be included within multiple forms? (referring to OSS hint 1009567 nr 5)
- It needs to be possible to mark texts as having to be printed cohesively onto one page (referring to OSS hint 1009567 nr 7)
- Tabulators
Texts are included that contain tabulators, would these be ignored as well?(referring to OSS hint 1009567 nr 9)
-Pagebreak
It must be possible to define an explicit page break(referring to OSS hint 1009567 nr 16)
-paper trays
t must be possible to trigger explicit paper trays(referring to OSS hint 1009567 nr 16)
- Email ADS
It must be possible to email the documents. Is this possible ((referring to OSS hint 1009567 nr 33 & OSS hint 1291734)
Furthermore I have some questions to hint 1009567:
-within nr 4 it is stated that final windows are not supported. What are final windows?
-within nr 6 it is stated that there are restrictions concerning the total amount of pages. This refers to the total amount of pages of a document and not to the total amount of pages of a spool, is this correct?
- within nr 13 it is stated that not all sapscript & smartforms functions concerning include texts and text modules are supporte. Does anybody have a list of what is not supported?
-within nr 15 is stated that coding knots within a context are not supported. what are coding knots within a context?
Thank you a lot in advance for your answers
Annette

Similar Messages

Basic questions with respect to ABAP WebDynpro Application

Hi All,
I have two basic questions with respect to an ABAP WebDynpro application :
a) If an ABAP WebDynpro application has been developed, how could it be made available to the end user?
b) Can an ABAP WebDynpro application be developed in ECC or is it only applicable for version 4.6c?
Thanks & Regards,
Sushanth Hulkod

Sushanth Hulkod wrote:
> a) If an ABAP WebDynpro application has been developed, how could it be made available to the end user?
>
> b) Can an ABAP WebDynpro application be developed in ECC or is it only applicable for version 4.6c?
a) If an ABAP WebDynpro application has been developed, how could it be made available to the end user?
Answer - By providing direct link of the WD application created in SE80, creating iView for webdynpro abap application in the portal environment and NWBC environment
b) Can an ABAP WebDynpro application be developed in ECC or is it only applicable for version 4.6c?
Answer - Yes it can be developed in ECC. Webdynpro ABAP is introduced in NW 2004s (SAP NetWeaver 7.0 or ECC 6.0)
Thanks,
Chandra

HT201303 Have forgotten my apple I'd security questions with respective answers

Have forgotten my apple I'd security questions with respective answers

Forgotten security questions - https://discussions.apple.com/message/18402551
More involved forgotten question issues - https://discussions.apple.com/thread/3961813
Frequently asked questions about Apple ID - http://support.apple.com/kb/HE37

A question with respect to using RSL in an Application

Hi
This question is with respect to using RSL in an Application
we are deciding to use RSL in our Application for improving the performance . Before using them i am having some queries ,please share your ideas on these questions :
Please let me know
How can i decide what swc file is suited for my Application ??
How many types of swc files are there what is the default swc file ??
and how can i choose my swc suited for my Application ??
Waiting for your replies .
Thanks in advance .

The SWCs you reference on the RSL options for MXMLC must match the ones that
will be used as RSLs

Question with respect to a report painter report : tcode S_ALR_87100190

Hi All,
I had a problem with the transaction S_ALR_87100190. With this transaction meant for Actual/Plan/Var Project + Responsible,
in the report selections for From Period/year and To Period/year, the system was not accepting special periods but was only accepting posting periods.
Hence the sap report was copied to another report and the fields Fiscal year and Period were added separately in order to solve the problem.
But now, after specifying the above two fields there seems to be an issue. If we specify the From fiscal year as 2005, from period as 06, To Fiscal year as 2008, To period as 10, it considers only those periods that are between 06 and 10. So if we have a period/fiscal year as 02/2006 that should appear in the report, the system is not picking the entry of 02/2006 in the report.
Does anyone know how the problem could be solved?
Thanks & Regards,
Sushanth Hulkod
Edited by: Sushanth on Feb 3, 2012 10:56 PM

Hi Sushanth,
Did you debug it.It is better you can keep a proper title.
Regards,
Madhu.

Question with respect to report painter

Hi All,
I needed to copy the standard form 3CST6 which is a drilldown cost report in the standard system that shows the project objects along with the Name of the Responsible Person in the output.
I needed to make a change to the copied report where I had to change the general selection from period / year to fiscal year. Hence I copied the form corresponding to 3CST6, made the change to fiscal year in the form corresponding to 3CST6 and while creating a new project, included the changed form. (copied from 3CST6).
After making the change to fiscal year and then executing the copied report, I do not see the responsible person in the output.
Could anyone help me out with this.
Thanks & Regards,
Sushanth Hulkod

Hi Sushanth,
Did you debug it.It is better you can keep a proper title.
Regards,
Madhu.

Some questions with respect to OSB 11g

Hi,
I am quite new to OSB 11g and have some queries.
1. If a SOA Composite transaction has been rolled back, how would be reflected in OSB. Would there be any retries?
2. For a composite to use a proxy service, is it a must to use a direct binding reference of OSB? Can't SOA composite simply consider a proxy service a generic web service?
3. Where are the debugging information written to? Can you control what is written to the debugging file? Can you specify filters,level of severity? Can you specify what context variables?
4. Does OSB only runs on WLS and is therefore not hot pluggable on other app servers?
5. One can create, attach WS-policies to my WSDL web services and enforce them on WLS all without using OWSM. If this is possible then what is the role of OWSM?
I would really appreciate any help with these queries.
Regards
Priya.

1. If a SOA Composite transaction has been rolled back, how would be reflected in OSB. Would there be any retries?
If you are calling an OSB Proxy from a SOA Composite and the transaction is terminated and rolled back from SOA Composite then OSB transaction will also be terminated and an error will be logged on OSB side. For retrying I am not sure but there should be an option in the SOA suite composite to retry.
2. For a composite to use a proxy service, is it a must to use a direct binding reference of OSB? Can't SOA composite simply consider a proxy service a generic web service?
SOA Suite composite can directly call a WSDL based Proxy Service as a generic web service. I believe it It should also be possible to invoke an XML/HTTP (Any XML Proxy Service) from SOA Suite composite. Although Direct Binding is the preferred option because of performance and security reasons.
3. Where are the debugging information written to? Can you control what is written to the debugging file? Can you specify filters,level of severity? Can you specify what context variables?
Debug information will be written into the WLS log files by default. You can log any information you want (context variables or custom data) from a Proxy Service message flow using Log action. You can control the severity of log in the Log Action.
You can define what level of Logs will be actually written to the log file and set any custom filters on Logs in the WLS Console (Home>Servers>{Your server Name}>Logging>Advanced).
If you want to enable specific debug logging at the server level(for ex if you want to log transaction details by default), you can do so by enabling needed debug logging at (Home>Servers>{Your server Name}>Debug)
4. Does OSB only runs on WLS and is therefore not hot pluggable on other app servers?
Yes OSB is only certified for WLS.
5. One can create, attach WS-policies to my WSDL web services and enforce them on WLS all without using OWSM. If this is possible then what is the role of OWSM?
Biggest difference is of Scope. You can very well attach WS Policies to services in OSB but their scope will only be of OSB. OWSM can do so at an enterprise level across various applications. OWSM also provides end to end security and SLA monitoring, easier update of Policies across enterprise etc. For more details on OWSM check out this white paper:
http://www.oracle.com/technetwork/middleware/webservices-manager/owsm-11g-tech-wp-134065.pdf

Pan no with respect to vendor in userexit zxf05u01( package fbk)

Dear Sir ,
In below code, Is exit for fk01, now my question is when we use fk02 then through debug mode we get into this exit
and depending on vendor we find pan no ,but i do not know from where   pan no coming with respect to vendor in corresponding memory id .
so how can we traced out that memory id.
user exit - ZXF05U01
DATA : PANCHK TYPE C,
INPUT TYPE J_1IPANNO.
TYPES : BEGIN OF ITAB," OCCURS 0,
TEXT(400) TYPE C,
END OF ITAB.
DATA : ITAB TYPE STANDARD TABLE OF ITAB,
WA_ITAB LIKE LINE OF ITAB,
WA_PAN TYPE J_1IMOVEND,
WA_LFA1 TYPE LFA1,
NAME1 TYPE STRING.
DATA : K TYPE J_1IPANNO.
DATA : ST_AUTH TYPE ZFK01.
*SELECT SINGLE * FROM ZFK01
INTO CORRESPONDING FIELDS OF ST_AUTH
WHERE BNAME = SY-UNAME.
*export ist_resb to memory id 'ZPPC0122_FD'.
*import *ist_resb *= ist_resb from memory id 'ZPPC0122_FD'.
*IMPORT ITAB FROM MEMORY ID 'TD'.
IF I_LFA1-KTOKK = 'Z003' OR I_LFA1-KTOKK = 'Z014'.
IMPORT PANCHK_1 TO PANCHK FROM MEMORY ID 'PAN01'.
IF PANCHK NE 'X'.
MESSAGE 'Enter PAN Number in CIN Detals.' TYPE 'E'.
MESSAGE E054(ZMM).
ELSE.
FREE MEMORY ID 'PAN01'.
ENDIF.
ENDIF.
IMPORT PANACT_1 TO INPUT FROM MEMORY ID 'PANACT'.
SELECT SINGLE *
FROM J_1IMOVEND
INTO CORRESPONDING FIELDS OF WA_PAN
WHERE J_1IPANNO = INPUT.
IF SY-SUBRC EQ 0.
SELECT SINGLE *
FROM LFA1
INTO WA_LFA1
WHERE LIFNR = WA_PAN-LIFNR.
CONCATENATE '(' WA_LFA1-NAME1 ')' INTO NAME1. " SEPARATED BY SPACE.
CONCATENATE '@0A@' 'PAN number' WA_PAN-J_1IPANNO 'already exist for vendor' WA_PAN-LIFNR NAME1
INTO WA_ITAB-TEXT SEPARATED BY SPACE.
APPEND WA_ITAB TO ITAB.
IF ITAB[] IS NOT INITIAL.
CALL FUNCTION 'OIJ_POPUP_TO_DISPLAY_TABLE'
EXPORTING
ENDPOS_COL = 100
ENDPOS_ROW = 10
STARTPOS_COL = 5
STARTPOS_ROW = 5
TITLETEXT = 'Repetition of PAN Number.'
LINE_WIDTH = 130
TKT_YEAR = '2010'
TABLES
I_TABLE = ITAB[]
TEST_DOCFLOW =
DOC_SET_TAB =
EXCEPTIONS
BREAK_OFF = 1
OTHERS = 2.
FREE MEMORY ID 'PANACT'.
MESSAGE E055(ZMM) WITH WA_PAN-J_1IPANNO WA_PAN-LIFNR NAME1.
CLEAR : WA_PAN, WA_LFA1, INPUT.
ENDIF.
ENDIF.
Thanks and regards
victor

Dear sir ,
I found this in as per your given path prabhu, i am not getting which i want.
"when in fk02 i fill the entry for pan detail then how it come in memory id " PANACT"
WHICH USED IN USEREXIT OF SAPMF02K WHOSE CODE I PASTED BEFORE.
?          help
SMEM       SAP memory (SPA-GPA)
MEMORIES   EXPORT/IMPORT memories
ITAB-ADMIN Internal table administration
ITAB-HEADS Internal tables: Table headers
ITAB-PAGES Internal tables: Table body pages
ITAB-REGIS Internal tables: Registry for references/field-symbols
ITAB-TOP25 Internal tables: top 25 concerning storage costs
STRINGHEAD Strings: Header table
SCREEN     SCREEN table
DATASETS   datasets / files
VERSION    system version
PROGRAMS   programs loaded
CUA        CUA status data
DSEG       data segments and work areas
ES         extendend memory segments (system wide)
ZTTA       task type area
SPA        system program area
PXA        program execution area
PXA64      program execution area
Regards
Victor
Edited by: victor ezaz on Oct 13, 2011 8:17 AM
Edited by: victor ezaz on Oct 13, 2011 8:17 AM

Capabillities of xMII with respect to TIBCO in integrating shop floor

Can any one tell capabilities of xMII in comparision with TIBCO with respect to shop floor integration and KPI generation . which is better.

First off, Like Ryan I too am bias towards xMII. Secondly I don't know that much about TIBCO, but here are some questions you ask in order to compare xMII with TIBCO:
1.) xMII is a very good data aggregate where you the customer determines what you need and how to use it. Does TIBCO have this functionality? Your applications come first in xMII, the functionality is not limited to just a set of canned KPIs, you can quickly and easily add new KPIs dependant on your needs.
2.) Shop floor connectivity is critical, Does TIBCO have the connectivity that xMII offers?
3.) xMII has great performance and is light weight. Unlike most 'Enterprise Level' application platforms, SAP xMII considers real-time to be in the order of seconds to minutes, not days or weeks. The largest overhead in an xMII installation (minus any other SAP systems) is NetWeaver.
Try to figure out you scenario, find all the business requirements you need, then check out xMII's abilities vs TIBCO. I think you'll agree that xMII can handle what ever TIBCO offers and most likely even more.
Martin.

Relative path for Download directory folder.I created a firefox profile and i wanted to use this profile in multiple machines.I wanted to use a relative path for download directory with respect to the profile folder.I need this on Linux machines

I have a use case where I need to use different download directories with different firefox profiles.I need to use this profiles in multiple linux machines.
I need to have a relative path to my download directory with respect to the profile folder.
Ex: I have a selenium test which opens a website and downloads it to my machine.I want this downloaded file to go into some specific folder relative to this profile folder.How do I do this??

That is not a practically empty xinitrc - that file only needs one line: exec WM. Other things are entirely optional, and some of them very useful, but I'd encourage you to stick with the simplest xinitrc that will do what you require.
Is slim involved? Probably. That is the source of many problems. But to start narrowing this down, I have 3 suggestions:
1) temporarily (at least) change your inittab to default to runlevel 3 ... actually, is it currently set to 5 or 3? if it is currently 3 that would explain why slim doesn't start.
2) at a tty in runlevel 3 use "xinit" instead of "startx". Startx is fine most of the time, but it is essentially just a complex wrapper for xinit. That complexity can often iadd useful functionality, but it *always* makes troubleshooting more difficult. So for now just use a vanilla 'xinit'.
3) remove dbus-launch from your exec line in xinitrc. This is done by console-kit so it is redundant and potentially problematic. Further BOTH of these are taken care of by slim, so I'd even suggest getting both a jump start on being ready for slim and simplifying troubleshooting by removing both of them. Just make that line "exec openbox-session"
Edit: adding one more:
4) temporarily switch out openbox-session for openbox. I suspect the reason feh's setting of the background is getting overridden is due to a script or setting in openbox's autostart settings - many of these are only invoked when "openbox-session" is called, while "openbox" starts *just* the window manager itself.
Last edited by Trilby (2012-10-03 17:30:36)

Performance issues with respect scheme registration,select & insert query

I am facing performance issues with respect to schema registration,Select & insert query towards 10.2.0.3 version.It is taking around 45 minutes to register schema and it is taking around 5 min to insert a single document into xml db where as it was taking less than min to insert a single document into xml db of 9.2.0.6 version.Would like to know the issue and solution to resolve this issue.Please help me out on this as it is very urgent for me

Since it appears that this is an XML DB specific question, you're probably better off posting in the XML DB. The folks over there have much more experience with the ins and outs of that particular product.
Justin

HT5622 I have a new desktop and re-installed my identity from my airtime back up and on the log in page my picture comes up with my usual password hint, but it is not accepting my password and I do not have the option to reset using my apple id - that par

I have a new desktop and re-installed my identity from my airtime back up and on the log in page my picture comes up with my usual password hint, but it is not accepting my password and I do not have the option to reset using my apple id - that particular function is in grey and cannot be clicked on

Depending on what kind of computer you have, you're gonna need to put that backup in the appropriate folder or itunes is not gonna be able to see it for you to use.

Inspection lot creation during GR with respect to Purchase Order

Dear Experts,
Here is my Question
Inspection lot creation during GR with respect to Purchase Order
Inspection type 01 set in the material master
inspection lot will be created during GR for a Purchase order
from my understanding for every GR a inspection lot will be created
No batch Management
but the requirement is irrespective to GR qty and number of times of GR
we need inspection only one inspection lot
For Instance
There is a PO for 1000 kg no batch management
now i do GR for 100 kg for 10 times with different dates
now i need to have only one inspection lot
not 10 inspection lot for each 100 kg
can any one suggest a solution, please advise my understanding is correct
Many thanks
Raj

Dear Raju,
There is a solution for that .The setting can be done two ways, either in the material master or in the configuration
1) Material Master
MM02> QM View> Inspection Setup> 01> Control Insplot> 'X' An inspection lot for each purchase order item/order item 0r An inspection lot for each material document and material
a) 'X' An inspection lot for each purchase order item/order item
This Means
This setting is limited for use with the inspection lot origins 01 and 04.
An inspection lot is only created during the first goods receipt for each PO item or production order.
b) '1' An inspection lot for each material document and material
If you set this indicator, the system creates only one inspection lot for a material document (in a goods receipt transaction) for each material. This setting is useful, if several purchase orders or partial deliveries are processed for the same material in a goods receipt transaction.
2) You can do this default in the config
SPRO > Quality Management > Quality Inspection > Inspection lot creation > Define Default values for inspection type > 01> Control Insp lot
Hope this helps
Regards
gajesh

Restricting issue of goods to cost center with respect to material type

Dear Users,
I have a requirement like we want to restrict issue of goods to cost center with respect to material type i.e., we want to issue goods to cost center only through reservation and that too only for specific material types. Is there any standard solution for this, please provide your suggestions.
Thanks,
Manoj

Hi Ajay,
Thanks for valuable input.
I also thought in the same line , but user has the following concern on this:
Assessment Cycle: As per Users, it cannot be used because this will allocate based on allocation basis. But they need, the values that was posted at the time of transaction and as per materials. So it wont be accurate through Assessment cycle,
OKB9: They have different Cost center for different valuation area for the same GL Account.
Hence through OKB9 also, we cannot post directly to COPA.
That's the reason the above option were not adopted.
My other concern to this is:
In CKM3, we have two lines under consumption, one for Normal sales PGI and other is Cost Center.
After doing revaluation of consumption in CKMLCP, we see one line under Cost Center :Revaluation of Consumption Figure"
My question, where can I see that figure whether in any table or in Cost Center report??
If that is also available we can try to match those values and post to COPA.
Let me know your thought on this.
Thanks and regards
Kami

How to populate the data or details of only the present year and the previous year with respect to the given RATNG?

Hi All,
I have created a form with 5 blocks (namely ENQACMHDR, ENQACMDTL, ENQACEHDR, ENQACEDTL, ENQACSPEC), where i have 8 push buttons (namely ENTER_QUERY, EXEC_QUERY, CLEAR, FIRST, NEXT, PREVIOUS, LAST & EXIT).
This form is created just for viewing purpose only. So after I execute, all the blocks have been blocked against insert & update.
I query on 2 fields that is 'ENQNO' and 'RATNG' (Both the fields belong to the block ENQACMDTL).
When I click on 'EXEC_QUERY' directly, all the data of all the years populates.
But the user wanted the data to be populated from only the present year and the previous year.
So , on 'WHERE Clause' of the property_palette of 'ENQACMDTL' block , I put in the following condition:
SUBSTR(ENQACMDTL.ENQNO, 1,4)=TO_CHAR( ADD_MONTHS(SYSDATE,-12) , 'YYYY') OR SUBSTR(ENQACMDTL.ENQNO, 1,4)=TO_CHAR(SYSDATE, 'YYYY')
PROPERTY PALETTE (ENQACMDTL block)
WHERE Clause
SUBSTR(ENQACMDTL.ENQNO, 1,4)=TO_CHAR( ADD_MONTHS(SYSDATE,-12) , 'YYYY') OR SUBSTR(ENQACMDTL.ENQNO, 1,4)=TO_CHAR(SYSDATE, 'YYYY')
Now the data of only the present year and the previous year is being populated. Its ok with the field of 'ENQNO'.
The problem is when i query on field 'RATNG' . 'RATNG' is a Text_item with Number of Items displayed=5. (5 rows)
The following are 2 columns of a Table (Name=ENQACMDTL) in Database.
ENQNO
RATNG
2013900054
500KC2
2013900047
800KC4
2013520018
750KC6
2012900037
1000KC2
2012520109
500KC2
2012140019
750KC6
2011540036
500KC2
2011100030
1000KC2
2006100007
90KD8
2006750014
750KC6
2006900072
500KC2
The first 4 numbers of 'ENQNO' denotes the year. There are more than a lakhs of records.
So when i query on the field 'RATNG',
Example:For RATNG=500KC2;
I click on ENTER_QUERY, On the field of 'RATNG' , i put in the value 500KC2 and click on EXEC_QUERY; Details with respect to 500KC2 is displayed as well as all the other unwanted RATNG like 750KC6, 1000KC2 (which belongs to the ENQNO of the present year and the previous year) also gets displayed.
I want details of only RATNG (500KC2) to be displayed, but only of the present year and the previous year, that is 2013900054, 2012520109 (ENQNO).
Other than 500KC2 RATNG, no other RATNG must be displayed.
The RATNG=500KC2 is also present for ENQNO=2011540036 , 2006900072. But I dont want these to be displayed.
I want only the data or details of the present year and the previous year to be displayed or populated with respect to the given RATNG.
Can You Help me or tell me what do i do for this?
Hope I'm clear with my question!!
If my question is not clear, let me know plz.
Thank You.
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
Oracle forms 6i.

On key-exeqry you have to program. Delete all other trigger codings for checking your condition.
It dint work on key-exeqry.
I tried key-exeqry on form trigger, block (enqacmdtl) and also on field(:enqacmdtl.enqno) , but none of them worked.
It did not display the message.
I have a 'PUSH-BUTTON:EXEC_QUERY.
For EXEC_QUERY, Trigger : WHEN_BUTTON_PRESSED;
I added the following code:
if to_number(substr(:enqacmdtl.enqno,1,4))<to_number(to_char(add_months(sysdate,-12),'YYYY')) then
     message('The Rating is not present for the present year and the previous year');message(' ',no_acknowledge);
     raise form_trigger_failure;
else
     execute_query;
end if;
It is working fine and the message is being displayed.
But again I have a new problem and that is;
On the field :enqacmdtl.enqno, when i enter the '2013%' and press 'EXEC_QUERY', it works fine.
but when i enter '2006%' and press 'EXEC_QUERY', it shows the following error
FRM-50016: Legal characters are 0-9 - +E. It does not display the message also.
but when i enter the complete number, '2006580002', then it works fine , that is it displays the message (The Rating is not present for the present year and the previous year).
The problem is because of '%', only when i put in the restricted data (which does not satisfy where condition).
How do i solve this?
Thank You Priyasagi.

Functionality Questions With Respect To OSS Hint 1009567

Similar Messages

Maybe you are looking for