Functionality wise comparision between ECC 5.0 and 6.0 for QM Module

Dear QM Experts,
Can anybody brief the comprehensive functionality wise comparision along with business benifits between ECC 5.0 and 6.0 for QM Module? For example, what are the diffrence for Quality Notification, Inspection plan, etc and other QM functionalities between 5.0 and 6.0.
Best Regards,
Anand Rao

Hi,
http://erp.fmpmedia.com/Default.aspx?alias=erp.fmpmedia.com/english
This link can be used for same.
Vishal

Similar Messages

Difference between ECC 6.0 and earlier versions

Hi,
one of the difference between ECC 6.0 and earlier versions is that instead 'WS_UPLOAD' and 'WS_DOWNLOAD' in ECC we should use 'GUI_UPLOAD' and 'GUI_DOWNLOAD' respectively.
(of course SPDD and SPRO tcodes is known by everone i suppose)
Similarly can u all put down some differences here, atleast one entry by each, I think we can make a good docu. I have searched the net for the differences but could not get much, so by each of us contributing one each, it would become good docu..for all of us.
Thanx in advance

Unicode Errors Encountered and their Solutions
E1. In u201CTEXT MODEu201D the u201CENCODINGu201D addition must be specified.
     Error:
     OPEN DATASET FILE FOR OUTPUT IN TEXT MODE.
     Solution:
     OPEN DATASET FILE FOR OUTPUT IN LEGACY TEXT MODE.
E2. In Unicode, DESCRIBE DISTANCE can only be used with the IN BYTE MODE or IN
      CHARACTER MODE addition.
     Error:
     DESCRIBE DISTANCE BETWEEN T_KOMK AND T_KOMK-HIEBO01 INTO BPOS.
     Solution:
DESCRIBE DISTANCE BETWEEN T_KOMK AND T_KOMK-HIENR01 INTO BPOS
IN CHARACTER MODE.
E3. u201CUSR02-UFLAGu201D must be a byte-type field (Typ X or XSTRING )
     Error:
     IF USR02-UFLAG O YULOCK.
     Solution: Since the data type of USR02-UFLAG is type INT and is compared with data type
                X u2013 Hence the error. So we define a new variable ZULOCK and assign the
                value of USR02-UFLAG to ZULOCK.
              New variable
              DATA: ZULOCK(1) TYPE X.   "APBRP00
              Assign value
                            ZULOCK = USR02-UFLAG.
        Compare -
               IF ZULOCK = YULOCK.   u201Creplace IF USR02-UFLAG O YULOCK.
E4. HT cannot be converted to a Character type field
Error :
WRITE ht TO t_data+10(2).
Solution : Since the data type of ht is a type u2018Xu2019 and the data is been transfer to
         t_data which has a data type u2018Cu2019. value of one data type cannot be copy to
         another data type where one of them is type string .Hence the error occur,
         so the data type of ht is been change to Type u2018Cu2019
     OR
           A Tab ( value 09 ) is introduced as part of the row. The value 09 is not converted in Unicode environment. Instead we need to use class
     Error:
          DATA: BEGIN OF ht,
               x(1) TYPE x VALUE '09',
          END OF ht.
     Solution:
              Define Class after the Tables definition.
                   CLASS cl_abap_char_utilities DEFINITION LOAD.
              Data Defination : Comment internal table HT and define a variable HT type C.
       *   Insert + APRIA00 05/02/2007 Unicode project
       *   DATA: BEGIN OF ht,
     *         x(1) TYPE x VALUE '09'
       *   END OF ht.
     *   Insert - APRIA00 05/02/2007 Unicode project
       DATA HT type C.
       Before using HT assign Horizontal tab.
                 Ht = CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
E5. In Unicode programs the u201C#u201D cannot appear in names, as it is does here in the name    u201C#LINESu201D
     Error :
     #LINES                 TYPE I,
     Solution : Since the # is used in the start of name, it is not allowed. We need to
              remove it.
     Solution for the above
     V_LINES                 TYPE I,
E6. In u201CTEXT MODEu201D the u201CENCODINGu201D addition must be specified as well as the addition was required FOR OUTPUT,FOR INPUT, FOR APPENDING OR FOR UPDATE was expected.
     Error:
     OPEN DATASET PATH_NAME IN TEXT MODE.
     Solution:
     Download =     OPEN DATASET PATH_NAME FOR OUTPUT IN LEGACY TEXT MODE.
     Upload        = OPEN DATASET AUSZUG-FILE IN TEXT MODE FOR INPUT ENCODING DEFAULT.
E7. u201CTABu201D must be a character-type data object( data type C,N, D, T or String). Field string)
     Error:
            data: begin of tab,                   "Excel Parameter Split at TAB
        t type x value '09',          "Tabulator
       end of tab.
            concatenate 'Material' 'Package Status'
                into z_download-line separated by tab.
            ( In the above command the two field are to be separated with a horizontal Tab. The earlier      way of assigning the tab value u201809u2019 will not work in Unicode environment.
     Solution:
     Define a class just after the Table defination.
          CLASS cl_abap_char_utilities DEFINITION LOAD.
            Define variable Tab as shown below :
          Data : TAB           TYPE C.
     Before the concatenate statement assign the value of Tab using pre-defined attributes.
          TAB = CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
E8. Upload/Ws_Upload and Download/Ws_Download are obsolete, since they are not Unicode-
      enabled; use the class cl_gui_frontend_services
     Error-1: Function WS_DOWNLOAD is obsolete in Unicode environment.
            call function 'WS_DOWNLOAD'
                 exporting
                      filename = zfilename
                 tables
                      data_tab = z_download.
     Solutions-1: Instead of WS_DOWNLOAD use GUI_DOWNLOAD.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
*   BIN_FILESIZE                  =
    FILENAME                      = zfilename
TABLES
    DATA_TAB                      = z_download.
E9. The "/" character is reserved for identification of namespaces. It must be entered twice.
        The name of a namespace must be at least 3 characters long.
     Error :
                 U/N(3)        TYPE C, "U/N    --> ERSETZT DURCH SPACE
     Solution :
     * Special character can not be used to define a data variable
     *      U/N(3)        TYPE C, "U/N    --> ERSETZT DURCH SPACE
              U_N(3)        TYPE C, "U/N    --> ERSETZT DURCH SPACE
     * Insert - APSUS02 07/02/2007 Unicode Project
E10. "LP_TAB" and "CS_TAB" are not mutually convertible. In Unicode programs,
         "LP_TAB" must have the same structure layout as "CS_TAB", independent of the length
         of a Unicode character.
     Error : This error is encountered when data from one internal table is copied to another
                         internal table which different structure. In this case its LP_TAB & CS_TAB.
                 LP_TAB[] = CS_TAB[].
     Solution :
          * Replace + APSUS02 07/02/2007 Unicode Project
*   LP_TAB[] = CS_TAB[].
              move-corresponding CS_TAB to LP_TAB.
          * Replace + APSUS02 07/02/2007 Unicode Project
E11. Could not specify the access range automatically. This means that you need a RANGE
          addition.
     Error : Range need to be specified as an addition to the command.
            DO 4 TIMES VARYING HELP_CHAR FROM ABCD(1) NEXT ABCD+1(1).
           Solution :
            DO 4 TIMES VARYING HELP_CHAR FROM ABCD(1) NEXT ABCD+1(1)
          * Insert + APSUS02 07/02/2007 Unicode Project.
                                                      RANGE ABCD+0(4).
* Insert - APSUS02 07/02/2007 Unicode Project.
E12 . Processing Terminated Error code: Error in opening /
                                          Path not found when downloading to Unix directory.
     Error : PARAMETER: outfile(92) DEFAULT
              '/CP/interface/NPP/data/MX/cbslaprcpts'
                    LOWER CASE,
               kmxmstrd AS CHECKBOX.
            This error is encountered when the path is missing. The above path is related to CCP.
     Solution: For testing purpose comment the original path and replace it with
                                 /CP/interface/CCD/Unicode_test/
E13.    Upload/Ws_Upload and Download/Ws_Download are obsolete, since they are not                                                                       Unicode- enabled; use the class cl_gui_frontend_services
     Error: Function WS_UPLOAD is obsolete in Unicode environment. (During UCCHECK)
               Call function 'WS_UPLOAD'
       Exporting
            Filename                = zfilename
            Filetype                = u2018DATu2019
       Tables
            data_tab                = z_upload
       Exceptions
            Conversion_error        = 1
            file_open_error         = 2
            file_read_error         = 3
            invalid_table_width     = 4
            invalid_type            = 5
            no_batch                = 6
            unknown_error           = 7
            gui_refuse_filetransfer = 8
            others                  = 9.
     Solution: Instead of WS_UPLOAD use TEXT_CONVERT_XLS_TO_SAP. Do not use temporary file put the file name as it is.
1) First define a type pool and a variable of type truxs_t_text_data.
TYPE-POOLS: truxs.
DATA: it_raw TYPE truxs_t_text_data.
     2) Use this it_raw in the function module in parameter i_tab_raw_data. Put file name and the internal table in the function module.
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
    EXPORTING
*     I_FIELD_SEPERATOR        =
*      i_line_header            = ' '
      i_tab_raw_data           = it_raw       " WORK TABLE
      i_filename               = zfilename
    TABLES
      i_tab_converted_data     = z_upload[]    "ACTUAL DATA
   EXCEPTIONS
      conversion_failed        = 1
      OTHERS                   = 2.
     Comment u201Ci_line headeru201D. It takes the first/ header line of the file which is to be uploaded.
Put square brackets after internal table as shown above.
E14.    CURSORHOLD may not be converted into a number.
     Error: GET CURSOR LINE CURSORHOLD VALUE CURSOR_HOLD.
     Solution: In the declaration part of CURSORHOLD, one field is of u2018Pu2019 type and one field is of u2018Iu2019 type, which is not allowed in Unicode environment.So change the the type of it to NUMC.

Is any different between ECC 5.0 and ECC 6.0 for Excel export?

Dear all,
As you know, most standard SAP report allow Excel export. I just wonder is any different between ECC 5.0 and ECC 6.0 for excel report in standard SAP reports?
In ECC 5.0, Reports in profit center accounting, LIS, or PA, etc. has their own different way to export to excel and is any improvement in ECC 6.0? I Thanks.

In ECC 5.0, a lot of reports don't have Excel export function instead user has to go to system -> List -> Save -> Local file -> spreadsheet.
I just wonder is any improvement in ECC 6.0? just like LIS report, user can select export -> Transfer XXL to either pivot table or just plain excel but the function only exist in certain reports in some modules and not all.
Thanks again.

Difference between ecc 4.0 and 6.0

Hello,
Please can someone tell me wht is the difference between ecc 4.0 and 6.0 in relation with BW.Like how will BW be affected with the change.
the other ques is that can we work on ECC 4.0 with BI7 ot BI7 will only work on ecc 6.0. Please can someone explain me tht.
thanks

For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.0 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, QM.....
Click on Search
Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
and also check the release notes of ECC 6.0 in service.sap.com.
Hope this helps you.

Difference between ecc 5.0 and 4.7 or earlier in MM

Hello masters,
would you briefly explain the diffrence between ecc 5.0 and 4.7. as per MM module is concerened ,any document or link given will be appriciated .
Thanks in Advance,
Suresh.

Please check these links...
Upgrading notes 4.7 Vs ECC6
Solution Browser would give the differences (Features):
http://solutionbrowser.erp.sap.fmpmedia.com/ Give source and target versions.
Release Info:
ECC 6.0:
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
ECC 5.0:
http://help.sap.com/saphelp_erp2004/helpdata/en/c6/feda40ebccb533e10000000a155106/frameset.htm
You can find the difference in release notes of each SAP version.
Here are the links.
http://help.sap.com/saphelp_47x200/helpdata/en/fc/e3003deddfae4de10000000a114084/frameset.htm
http://help.sap.com/saphelp_scm50/helpdata/en/28/b34c40cc538437e10000000a155106/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
Thanks
Senthil

How to create RFC Destination Between ECC 6.0 and BI 7.0

HI,
My name is balu working in gucons,i was trying to create RFC between ECC 6.0 and BI 7.0,i have tried with the help of some documents but iam unable to do that,Iam very helpfull if you give a clear description regarding this problem.
Thank you,
Regards,
BALU.

Hi Balu
the error screen is from your BI system? If yes, then why the source system is showing to be of type BI? For ECC it should be of type r/3.
You can try to delete already created RFC from both your BI and ECC system and try to create source system connection from your BI end from RSA1>> Source System> right click..Create..
Choose "Automatically Create SAP system" . Enter the required credential then click on "Replicate as well"
If you do not want to delete any RFC for any reason please upload entries from RSBASIDOC, RSLOGSYST table.

Difference between Ecc 5.0 and Ecc 6.0 SAP note number

Hello Friends,
Is any one knows difference between Ecc 5.0 and Ecc 6.0 version released SAP notes for FICO module.
Thanks in advance for your help
Thanks,
Ratnam

Hi,
Check these
Technical difference between 4.7 and ECC 5.0
difference between sapr/3 4.7 and sapr/3 ecc 5.0
Differences b/n 4.6c,4.7 and ECC 5.0
Regards
vijay

Difference between ECC 5.0 and SAP 4.7

Hi,
Can anyone please explain the difference between ECC 5.0 and SAP 4.7 from ABAP point of view? What is the full form of ECC?
Best wishes,
Atanu

Hi,
Check these
Technical difference between 4.7 and ECC 5.0
difference between sapr/3 4.7 and sapr/3 ecc 5.0
Differences b/n 4.6c,4.7 and ECC 5.0
Regards
vijay

Difference between ECC 5.0 and ECC 6.0

Hi all,
What are the generic differences between ECC 5.0 and ECC 6.0.
If usefull i will assign the points
thanks in advance
venu

http://solutionbrowser.erp.sap.fmpmedia.com/
http://service.sap.com/releasenotes
http://service.sap.com/upgrade

Difference between Crsytal Report 2011 and Crystal Report for Enterprise 4

difference between Crystal Report 2011 and Crystal Report for Enterprise 4.0?
I think Crystl Reprt 2011 has more function, is it right?

Hi,
I recently attended a SAP Virtual trianing on SAP Business Objects BI 4.0.
Here are few extracts from that which probably shows some light to you:
SAP Crystal Reports 2011
1. UI and associated processing servers remain the same as CR 2008
2. Incremental update to CR 2008 with a few new features*
3. Continue to provide current CR 2008 functionality as-is for existing customers
SAP Crystal Reports for Enterprise 4.0
1. Major update & redesign of the Crystal Reports Designer and associated processing servers
2. Focus on streamlined report design, reporting against BI 4.0 Universe, & reporting against SAP BW data
3. Provide the foundation for all future releases of Crystal Reports
Differences between these two releases:
Data Source & Usage Type                                       General Recommendation
1. SAP BusinessObjects BI 4.0                                        SAP Crystal Reports Relational Universe (UNX) for Enterprise
OLAP Universe (UNX)
2. SAP NetWeaver BW 7 BEx Query (BICS)                    SAP Crystal Reports for Enterprise
3. SAP NetWeaver BW 3.5 BEx Query                             SAP Crystal Reports 2011
4. SAP Profitability Cost Management                              SAP Crystal Reports for Enterprise through Analysis View
SAP Strategy Management
SAP Budget, Planning and Consolidation
SAP Extended Analytics
5. Platform Driven Alerting                                                SAP Crystal Reports for Enterprise
6. Business Views                                                           SAP Crystal Reports 2011
7. Direct RDBMS or OLAP access                                    SAP Crystal Reports 2011
    SAP ERP/ Live Office Content/
    Enterprise search content
Regards
Gowtham

Functional Transaction Difference between SAP 4.7 and ECC 6.0 in Case of SD

Hi,
Experts can you Pls tell Transaction difference between SAP 4.7 and ECC 6.0 in case of SD module.
Like VA05n is one transactional difference.
regards,
Rohan

Refer below for the Transaction codes, You can find the functional differences in Release note or Solution browser > Apart from the functional Delta most of the reports are in ALV Grid disply and few changes you can note in Organizational Structure Assignment and consistency check , Document flow , Purchase Order Data tab and Item Conditions so on
VA05N List of Sales Orders
VA25N Quotation List
VF05N Billing Document List
VA45N List of Contracts
OVX8N Check Report Organization Sales
OVX3N Assign sales organization to company code
OVXKN Assign distribution channel to sales organization
OVXAN Assign division to sales organization
OVXGN Set up sales area
OVXMN Assign sales office to sales area
OVXJN Assign sales group to sales office
OVX6N Assign sales organization - distribution channel - plant

Transfer VOIP Calls Between Cisco Desk Phone and Cisco Jabber For IPhone 9.5

Does anyone know how to transfer an active voip call from a Cisco IP Desk Phone to Cisco Jabber for IPhone? I can transfer a call from Cisco Jabber for IPhone to my Cisco IP Desk Phone no problem. I put the call on hold and then click "Resume" on my Cisco IP Desk Phone. However I cannot do the same but the other way around. If I put the call on hold on my Cisco IP Desk Phone, I see "no active call" on my Jabber client. The only information I could find slighlty relevant was using the Mobility Key/Remote Destination Profile feature however this defeats the object as this will forward to an external number, e.g. mobile and I just want to transfer the call within the VOIP environment between the two devices that are using the same directory number.
I am using Cisco Call Manager 9.1(2), Cisco Presence 9.1 and Cisco Jabber for IPhone 9.5.
Any help would be greatly appreciated.
Kind Regards,
Paul Parker.

Did you ever find an answer to this ?
I am seeing the same behavior and trying so see if I can put calls on hold and pick them up both ways also.
The only answer I seem to have found is to use park instead
That would/should work but I would just prefer to hold/unhold
Just not sure why we would not be able to hold/unhold on what is essentially a "shared" line
Does anyone have this working for them ?

Message flow between advanced adapter engine and messaging system for ICO scenarios

Dear all,
I'm working on a PI 7.31 AEX box and created an ICO object for one interface with HTTP_AAE2IDoc scenario. The interface works quite well. When I looked in to message log of messages for this interface in PI monitor, I noticed that the internal XI message are put totally 5 times into the send queue and retrieved from send queue. In some steps I only see after retrieving a message from send queue and immediately put it back into send queue. Can someone please kindly explain the message flow between advanced adapter engine and messaging system and what exactly happens after each retrieving a message from send queue?
Below is an example of message log for one message:
12/08/2014 09:26:06.472    Information    MP: processing local module localejbs/CallSapAdapter
12/08/2014 09:26:06.472    Information    Application attempting to send an XI message asynchronously using connection HTTP_AAE_http://sap.com/xi/XI/System
12/08/2014 09:26:06.478    Information    Trying to put the message into the send queue
12/08/2014 09:26:06.499    Information    Message successfully put into the queue
12/08/2014 09:26:06.499    Information    The message was successfully retrieved from the send queue
12/08/2014 09:26:06.499    Information    The application sent the message asynchronously using connection HTTP_AAE_http://sap.com/xi/XI/System. Returning to application
12/08/2014 09:26:06.500    Information    HTTP adapter successfully processed interface PlantResponse_Out
12/08/2014 09:26:06.501    Information    Trying to put the message into the send queue
12/08/2014 09:26:06.501    Information    Message status set to DLNG
12/08/2014 09:26:06.513    Information    Message successfully put into the queue
12/08/2014 09:26:06.513    Information    The message was successfully retrieved from the send queue
12/08/2014 09:26:06.515    Information    Message status set to DLNG
12/08/2014 09:26:06.533    Information    Trying to put the message into the send queue
12/08/2014 09:26:06.548    Information    Message successfully put into the queue
12/08/2014 09:26:06.548    Information    The message was successfully retrieved from the send queue
12/08/2014 09:26:06.550    Information    Message status set to DLNG
12/08/2014 09:26:06.551    Information    Executing Request Mapping "http://styrolution.com/pi/Integration/PlantMaintenance/PlantResponse/PlantResponse_to_Zcol_Basf_Inotif02_Inotif01_Zeupm_Inotif01_Ludwigshafen" (SWCV 085d2320fb3b11e2cc0bf4d50aea8c33)
12/08/2014 09:26:06.563    Information    Trying to put the message into the send queue
12/08/2014 09:26:06.571    Information    Message successfully put into the queue
12/08/2014 09:26:06.571    Information    The message was successfully retrieved from the send queue
12/08/2014 09:26:06.573    Information    Trying to put the message into the send queue
12/08/2014 09:26:06.573    Information    Message status set to DLNG
12/08/2014 09:26:06.580    Information    Message successfully put into the queue
12/08/2014 09:26:06.580    Information    The message was successfully retrieved from the send queue
12/08/2014 09:26:06.582    Information    Message status set to DLNG
12/08/2014 09:26:06.583    Information    Delivering to channel: IDOC_R
12/08/2014 09:26:06.583    Information    MP: processing local module localejbs/IDocOutboundModuleBean
12/08/2014 09:26:06.583    Information    XI message received for processing
12/08/2014 09:26:06.587    Information    Sender Party: Sender Service:SXX Receiver Party: Receiver Service:RXXCLNT200 Communication Channel:IDOC_R
12/08/2014 09:26:06.588    Information    IDOC metadata repository is RXX
12/08/2014 09:26:06.589    Information    Control record is not mandatory - control record will be added if not available
12/08/2014 09:26:06.590    Information    XML Payload parsed to idoc document list with number of idocs: 1
12/08/2014 09:26:06.595    Information    Sending idoc message to receiver R/3 system with TID XIh{lsRI824UITC0009OalmW
12/08/2014 09:26:06.813    Information    IDOC message sent to receiver R/3 system
12/08/2014 09:26:06.817    Information    TID XIh{lsRI824UITC0009OalmW confirmed
12/08/2014 09:26:06.819    Information    Message was successfully transmitted to endpoint <local> using connection HTTP_AAE_http://sap.com/xi/XI/System
12/08/2014 09:26:06.821    Information    Message status set to DLVD
Thanks & regards
Dingjun

Hello All,
Thanks for the prompt responses and with best information, But apart from this,I need how an adapter(File/JDBC) works along
with AAE in PI 7.1. When does the job of File/JDBC adapter is completed and resumed in a synchronous case. That is,
File Location --> file adapter -
> XI(AAE) --> JDBC adapter --> database.
In file sender, lets suppose we have synchronous settings(Best Effort). Now when File adapter's job is finished and when it
gets back the response back from XI. Please explain step by step from starting(file adapter polling the location) to getting the response coming back to XI.
Regards,
Achari.

Difference between ECC 5.0 and R/3 4.7

Hi all,
Can anyone help me in finding difference between ECC5.0 and 4.7 versions?
Regards,
Murali.

Hello Murali,
Version comparision link is available in the first thread of this forum.
http://solutionbrowser.erp.sap.fmpmedia.com/
Also, here is some more info
http://help.sap.com/saphelp_erp2004/helpdata/en/1f/00d340fa1a732ae10000000a155106/Chap_13_MM.pdf
Complete release note.
http://help.sap.com/saphelp_erp2004/helpdata/en/c6/feda40ebccb533e10000000a155106/frameset.htm
Hope this helps.
Regards
Arif Mansuri

Integration between ECC PDF document and NW2004s portal ...

I am hoping someone can point me to some documentation to do the following ... I have an adobe forms pdf document in SAP ECC. I can pull up the PDF file in ECC and it looks fine. How do I create a request from a NW2004s EP7 SPS15 portal that will display the PDF on the portal?
We have installed Adobe Document Services (ADS) and I have tested all the connections and everything appears to be configured correctly.
I don't know how to make the call from the portal and have the PDF file that I can generate in ECC display on the portal.
Any help will be appreciated! Thanks.

Hi Angie,
If you have the PDF doc, you can upload that into the KM repository and create a KM document iview.
http://help.sap.com/saphelp_nw04/helpdata/en/fc/cf14bcd42911d5994400508b6b8b11/frameset.htm
Is this what you are looking for?
Cheers,
Sandeep Tudumu

Functionality wise comparision between ECC 5.0 and 6.0 for QM Module

Similar Messages

Maybe you are looking for