Functions in BW
Hello,
Whci functions does BW gives?
hi
BW is an integral part of CRM,it is involved in many transactional and non transactional flow of business info in and out of CRM
to understand the BW you need to understand first what is CRM analytics
CRM Analytics
Use
You can choose from a range of planning applications to assist you in your planning tasks for your customer relationships. For these planning applications, SAP delivers example scenarios that use objects in BW-BPS.
From the technical standpoint, the planning applications share the same infrastructure, the Planning Services.
Integration
The planning applications are integrated with SAP CRM to differing levels of closeness. Sales Target Planning as part of Sales Planning, for example, is only loosely integrated with SAP CRM, that is, the integration is restricted solely to the master and actual data that was extracted from SAP CRM into SAP BW. Opportunity Planning is closely integrated with SAP CRM. The master and actual data is supplied directly from SAP CRM when planning is executed, without it first having to be extracted into SAP BW.
These different types of integration mean that you can execute the planning applications in different ways:
· You perform the loosely-integrated planning applications in SAP BW.
· You can only perform the closely integrated planning applications in SAP CRM, such as marketing planning in Marketing Planner.
now just go thorugh this thread,it will give you amazing explainantion about what is BW
http://www.thespot4sap.com/Articles/SAP_BW_Introduction.asp
http://help.sap.com/saphelp_nw70/helpdata/EN/04/47a46e4e81ab4281bfb3bbd14825ca/frameset.htm
it will definitely serve ur purpose
best regards
ashish
Similar Messages
-
Fax function of HP LaserJet Enterprise 500 Color MFP M575
Hi,
I am one of users of HP LaserJet Enterprise 500 Color MFP M575.
I would like to know can I set the printer do not print my fax number and fax header on paper when I fax my document to others.
I had login as admin but I did not see where I can config it.
Thank you.
Regards,
Jimmy PunThere is no change to this problem after 6 months since the last post. Put simply, and as stated in the previous posts, there is no way to scan a document and receive the image on your PC. If you are working with graphics for any length of time or want to create an image for inclusion as an image in a document or web page using this piece of equipment will not allow you to do so.
Great shame as every other function works well - it cannot be beyond the wit of HP to include a Windows application that enables you to scan an image, receive it in the software you are using at the time (e.g. Outlook, Word, Photoshop...) and use it in your work.
HP Printers several years older than this £1000+ Enterprise printer were able to do this simple job and have done so for a great many years. Just being able to use Microsoft's Fax and Scan would be start. -
Logical Operations in SQL decode function ?
Hi,
Is it possible to do Logical Operations in SQL decode function
like
'>'
'<'
'>='
'<='
'<>'
not in
in
not null
is null
eg...
select col1 ,order_by,decode ( col1 , > 10 , 0 , 1)
from tab;
select col1 ,order_by,decode ( col1 , <> 10 , 0 , 1)
from tab;
select col1 ,order_by,decode ( col1 , not in (10,11,12) , 0 , 1)
from tab;
select col1 ,order_by,decode ( col1 ,is null , 0 , 1)
from tab;
Regards,
infan
Edited by: user780731 on Apr 30, 2009 12:07 AM
Edited by: user780731 on Apr 30, 2009 12:07 AM
Edited by: user780731 on Apr 30, 2009 12:08 AM
Edited by: user780731 on Apr 30, 2009 12:08 AM
Edited by: user780731 on Apr 30, 2009 12:09 AMexample:
select col1 ,order_by,case when col1 > 10 then 0 else 1 end
from tab;
select col1 ,order_by,case when col1 <> 10 then 0 else 1 end
from tab;
select col1 ,order_by,case when col1 not in (10,11,12) then 0 else 1 end
from tab;As for testing for null, decode handles that by default anyway so you can have decode or case easily..
select col1 ,order_by,decode (col1, null , 0 , 1)
from tab;
select col1 ,order_by,case when col1 is null then 0 else 1 end
from tab; -
Hi,
When we use IF in calculation view with CE function the SQL engine is used.
When we remove the "IF" the CE engine is used.
Is there any alternative for if or case in CE functions?
Thanks,
AmirIs it possible to use CE_CALC for this functionality?
We are trying to use it inside projection:
res_bal = CE_PROJECTION (:bal,[ "BUDAT", "RYEAR" , "Bal_Date" AS "BALANCE_DATE", "RTCUR" ,"MAX_ZGROUP"],'"BALANCE_DATE" == 20140101');
works but:
res_bal = CE_PROJECTION (:bal,[ "BUDAT", "RYEAR" , "Bal_Date" AS "BALANCE_DATE", "RTCUR" ,"MAX_ZGROUP"], '"BALANCE_DATE" == CE_CALC( 'if(''20140101'' == ''19000101'', ''19000101'', ''20140101'')');
Doesn't work.
Thanks,
Amir -
I record my band rehearsals using the voice memo on my iPhone 5s. Then I sync to iTunes and convert file to mp3. When i sync back to my iPhone it appears in my music. So far, so good. When I use the search function in music it finds the file but won't play from tapping. I must troll through all my music songs (currently 2227 of them) to find it and then play it. Is it something to do with it still being under the genre "voice memos" or what ? Anybody help please. Thanks
iWeb is an application to create webpages with.
It used to be part of the iLife suite of applications.
iWeb has no knowledge of the internal speaker on your iPhone.
You may want to ask in the right forum. -
HP AiO Remote app will not recognize scan and copy function of HP Envy 120
Good morning! HP AiO Remote App is installed on my iPad4 and in the same WiFi network with my HP Envy 120 printer. The printer is recognized by the app and marked with a green led. When I tap on scan or copy in the app menu, it tells me that these functions were available in the app only for printers which provide these features. But HP Envy 120 has both scanner and copier. And last time it worked. Some idea what could have happened here? Thanks. UJ
Replied on: http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile-Printing-and-ePrintCenter/HP-AiO-Remote-will-n...
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
HP AiO Remote will not recognize scan and copy function of HP Envy 120 printer
Good morning! HP AiO Remote App is installed on my iPad4 and in the same WiFi network with my HP Envy 120 printer. The printer is recognized by the app and marked with a green led. When I tap on scan or copy in the app menu, it tells me that these functions were available in the app only for printers which provide these features. But HP Envy 120 has both scanner and copier. And last time it worked. Some idea what could have happened here? Thanks. UJ
Hi UJKarl, welcome to the HP Forums. You should be able to scan from the HP AIO Remote App on your Envy 120 printer. You probably just need to power cycle the printer, iPad and router to regain proper function.
Turn off your printer with the power button. Power down the iPad by holding the sleep button down until you get the option to 'slide to power off'. Then disconnect the power cord to your router and count to about 10, and then plug it back in. Once the router comes back online, turn the printer on. When the printer comes back online (blue wi-fi light stops blinking), then power the iPad back up. Try again, and it should work.
Let me know how it turns out.
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
7515 ios 8 scanning doesn't function using document feeder
My AiO remote updated on my iPad today and i have issues scanning from the scanner. The printer and tablet functions properly when scanning using the glass however when using the document feeder, AiO remote scans the sheets then before saving it says there is a problem with the scanner, check the scanner. not sure why it works with the glass and NOT with the feeder.
I am having the exact same problem. I will add that scanning from the document feeder to my Mac Book works fine. The problem with the document feeder is only whenn atttempting to use the AiO software on my iPad.
-
I want to implement thems functionality in my swing application
Hi All...
I want to implement the themes object in my swing application,How ,where to start and move that functionality,If anybody use this functionality in your program experience can u share with me.
Than to Advance
ARjun...Hi Kuldeep Chitrakar
I can do that in web intelligence. dont want that
I am replicating some of the sample report of SQL Servers in BusinessObjects XI R3.1.
One of the SQL Sever's report is of product catalogue type that gives complete information like name, category, description along with the products image etc... for each of the products.
I am trying to replicate the above said SQL Server report in Business objects XI R3.1. I am facing problem in bringing the image in to my BO report. The image resides in a table and its datatype is of varbinary(max). I don't know the exact matching while creating an object in the uiverse designer.
Here is the url link http://errorsbusinessobjectsxir3.blogspot.com/2010/10/business-objects-image-errors.html
Regards
Prasad -
Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected] -
URGENT: Function modules or BAPIs
Hi Experts,
I need function modules or BAPI to get the open items and cleared items G/L Account wise.
Useful replies will be surely awarded.Hi Chakradhar,
Check tcode : BAPI
u will get all bapis there.
Regards,
Hemant -
How to attached class or function module in FD03
Hi Guys
I want to attached CL_ATTACHMENT_LIST for retriving attachment list from fd03 please help to attached the function module in my program?
regards
Piroz
report zfir_aged_debtors no standard page heading
line-size 255.
Type group
type-pools:
slis. " ALV types
Tables
tables:
adrc, " Addresses
bsad, " Accounting: Customer secondary index (Cleared)
bsid, " Accounting: Customer secondary index (Open)
kna1, " Customer master: General data
knkk, " Customer master: Credit management
knvk. " Customer master: Contact persons
Types
types:
begin of ty_bsadbsid,
bukrs like bsad-bukrs, " Company code
kunnr like bsad-kunnr, " Customer
gjahr like bsad-gjahr, " Fiscal year
belnr like bsad-belnr, " Accounting document number
buzei like bsad-buzei, " Line item
budat like bsad-budat, " Posting date
bldat like bsad-bldat, " Document date
waers like bsad-waers, " Currency
xblnr like bsad-xblnr, " Reference
shkzg like bsad-shkzg, " Debit/credit indicator
dmbtr like bsad-dmbtr, " Amount
zfbdt like bsad-zfbdt, " Baseline date for due date
" calculation
zbd1t like bsad-zbd1t, " Cash discount days 1
zbd2t like bsad-zbd2t, " Cash discount days 2
zbd3t like bsad-zbd3t, " Net payment terms period
rebzg like bsad-rebzg, " Number of the invoice
rebzt like bsad-rebzt, " Follow on document type
end of ty_bsadbsid,
ty_it_bsadbsid type ty_bsadbsid occurs 0,
begin of ty_merged,
kunnr like kna1-kunnr, " Customer number
name1 like adrc-name1, " Name
city1 like adrc-city1, " City
post_code1 like adrc-post_code1, " Post code
street like adrc-street, " Street
house_num1 like adrc-house_num1, " House number
tel_number like adrc-tel_number, " Telephone number
fax_number like adrc-fax_number, " Fax number
namev like knvk-namev, " First name
namew like knvk-name1, " Last name
telf1 like knvk-telf1, " Telephone number
klimk like knkk-klimk, " Credit limit
skfor like knkk-skfor, " Total receivables
total like bsad-dmbtr, " Total amount
rast1 like bsad-dmbtr, " Amount period 1
rast2 like bsad-dmbtr, " Amount period 2
rast3 like bsad-dmbtr, " Amount period 3
rast4 like bsad-dmbtr, " Amount period 4
rast5 like bsad-dmbtr, " Amount period 5
rast6 like bsad-dmbtr, " Amount period 6
end of ty_merged,
ty_it_merged type ty_merged occurs 0.
Internal tables
data:
Internal table to store customer line items from BSAD and BSID
it_bsadbsid type ty_it_bsadbsid,
Internal table to store field catalog for ALV function call
it_fieldcat type slis_t_fieldcat_alv,
Internal table to store summarised data for report output
it_merged type ty_it_merged.
Structures
data:
Display variant structures
st_tvariant like disvariant,
st_variant like disvariant.
Constants
constants:
co_delim_dash type c
value '-',
co_false type c " False
value space,
co_koart_d like faede-koart " Customer account type
value 'D',
co_save_u type c " User display variant
value 'U', " saving allowed.
co_shkzg_h like bsid-shkzg " Debit/Credit indicator
value 'H', " for credit
co_shkzg_s like bsid-shkzg " Debit/Credit indicator
value 'S', " for debit
co_selected type c " Value of selected radio
value 'X', " button or checkbox
co_true type c " True
value co_selected.
Variables
data:
va_exit type c.
Selection screen definition
selection-screen: begin of block b1 with frame title text-001.
select-options:
s_kunnr for bsad-kunnr. " Customer number
parameters:
p_kkber like knkk-kkber, " Credit control area
p_pafkt like knvk-pafkt, " Contact function
p_datum like sy-datum. " Report date
selection-screen: begin of line,
comment 01(30) text-006,
position pos_low.
parameters:
rastbis1 like rfpdo1-allgrogr " Due date sorted 1
default '000',
rastbis2 like rfpdo1-allgrogr " Due date sorted 2
default '000',
rastbis3 like rfpdo1-allgrogr " Due date sorted 3
default '000',
rastbis4 like rfpdo1-allgrogr " Due date sorted 4
default '000',
rastbis5 like rfpdo1-allgrogr " Due date sorted 5
default '000'.
selection-screen: end of line.
selection-screen: end of block b1,
begin of block b2 with frame title text-002.
parameters:
p_varint like disvariant-variant. " Display variant.
selection-screen: end of block b2.
Initialisation
initialization.
Provide default periods for due date sorted list.
rastbis1 = 0.
rastbis2 = 30.
rastbis3 = 60.
rastbis4 = 90.
rastbis5 = 120.
Default report date to current.
p_datum = sy-datlo.
Default credit control area to BP01.
p_kkber = 'BP01'.
At selection screen on value request for
at selection-screen on value-request for p_varint.
Provide display variant list for this program.
call function 'REUSE_ALV_VARIANT_F4'
exporting
is_variant = st_variant
i_save = co_save_u
importing
e_exit = va_exit
es_variant = st_tvariant
exceptions
not_found = 2.
if sy-subrc eq 2.
message id sy-msgid type 'S'
number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
else.
if va_exit eq space.
st_variant = st_tvariant.
p_varint = st_tvariant-variant.
endif.
endif.
At selection screen
at selection-screen.
Load display variant.
if not p_varint is initial.
move st_variant to st_tvariant.
move p_varint to st_tvariant-variant.
call function 'REUSE_ALV_VARIANT_EXISTENCE'
exporting
i_save = co_save_u
changing
cs_variant = st_tvariant.
st_variant = st_tvariant.
else.
clear st_variant.
st_variant-report = sy-repid.
endif.
if p_kkber is initial.
Ensure credit control area is specified.
message e000(zgen) with 'Credit control area must be specified'.
endif.
if p_pafkt is initial.
Ensure contact person function is specified.
message e000(zgen) with 'Contact person function must be specified'.
endif.
Start of selection
start-of-selection.
Extract open customer items from BSID
select bukrs kunnr gjahr belnr buzei budat bldat waers xblnr shkzg
dmbtr zfbdt zbd1t zbd2t zbd3t rebzg rebzt
from bsid
into table it_bsadbsid
where kunnr in s_kunnr
and budat le p_datum.
Extracct cleared customer items from BSAD
select bukrs kunnr gjahr belnr buzei budat bldat waers xblnr shkzg
dmbtr zfbdt zbd1t zbd2t zbd3t rebzg rebzt
from bsad
appending table it_bsadbsid
where kunnr in s_kunnr
and budat le p_datum
and augdt ge p_datum.
Ensure that items were not selected twice while getting data from the
open and cleared items tables (Only if transaction occured during
report run).
sort it_bsadbsid by bukrs belnr gjahr buzei.
delete adjacent duplicates from it_bsadbsid
comparing bukrs belnr gjahr buzei.
if it_bsadbsid[] is initial.
No data found for selection
message s001(zgen).
exit.
endif.
Merge data for report output
perform merge_data tables it_bsadbsid
it_merged.
Build field catalog
perform build_field_catalog tables it_fieldcat.
Output report via ALV
perform output_report_via_alv tables it_fieldcat
it_merged.
*& Form merge_data
text
form merge_data tables pa_it_bsadbsid type ty_it_bsadbsid
pa_it_merged type ty_it_merged.
Local work areas
data:
lwa_bsadbsid type ty_bsadbsid,
lwa_merged type ty_merged.
Local structures
data:
lst_faede like faede.
Local variables
data:
lva_daysover type i,
lva_merged_tabix like sy-tabix.
loop at pa_it_bsadbsid into lwa_bsadbsid.
Lookup merged entry for customer
clear lwa_merged.
read table pa_it_merged into lwa_merged
with key kunnr = lwa_bsadbsid-kunnr
binary search.
lva_merged_tabix = sy-tabix.
if sy-subrc ne 0.
Create new merged record for customer
lwa_merged-kunnr = lwa_bsadbsid-kunnr.
Get customer details from KNA1
clear kna1.
select single *
from kna1
where kunnr eq lwa_bsadbsid-kunnr.
Get customer address details from ADRC
clear adrc.
select single *
from adrc
where addrnumber eq kna1-adrnr
and date_from le p_datum.
lwa_merged-name1 = adrc-name1.
lwa_merged-city1 = adrc-city1.
lwa_merged-post_code1 = adrc-post_code1.
lwa_merged-street = adrc-street.
lwa_merged-house_num1 = adrc-house_num1.
lwa_merged-tel_number = adrc-tel_number.
lwa_merged-fax_number = adrc-fax_number.
Get credit limit details from KNKK
clear knkk.
select single *
from knkk
where kunnr eq lwa_bsadbsid-kunnr
and kkber eq p_kkber.
lwa_merged-klimk = knkk-klimk.
lwa_merged-skfor = knkk-skfor.
Get customer contact person details from KNVK
clear knvk.
select single *
from knvk
where kunnr eq lwa_bsadbsid-kunnr
and pafkt eq p_pafkt.
lwa_merged-namev = knvk-namev.
lwa_merged-namew = knvk-name1.
lwa_merged-telf1 = knvk-telf1.
insert lwa_merged into pa_it_merged index lva_merged_tabix.
endif.
Interpret debit/credit indicator
case lwa_bsadbsid-shkzg.
when co_shkzg_h.
Credit
lwa_bsadbsid-dmbtr = 0 - lwa_bsadbsid-dmbtr.
when co_shkzg_s.
Debit
endcase.
Perform ageing
clear lst_faede.
move-corresponding lwa_bsadbsid to lst_faede.
lst_faede-koart = co_koart_d.
call function 'DETERMINE_DUE_DATE'
exporting
i_faede = lst_faede
importing
e_faede = lst_faede
exceptions
others = 1.
lva_daysover = p_datum - lst_faede-netdt.
Accumulate total.
add lwa_bsadbsid-dmbtr to lwa_merged-total.
if lva_daysover le rastbis1.
add lwa_bsadbsid-dmbtr to lwa_merged-rast1.
else.
if lva_daysover le rastbis2 or
rastbis3 is initial.
add lwa_bsadbsid-dmbtr to lwa_merged-rast2.
else.
if lva_daysover le rastbis3 or
rastbis4 is initial.
add lwa_bsadbsid-dmbtr to lwa_merged-rast3.
else.
if lva_daysover le rastbis4 or
rastbis5 is initial.
add lwa_bsadbsid-dmbtr to lwa_merged-rast4.
else.
if lva_daysover le rastbis5.
add lwa_bsadbsid-dmbtr to lwa_merged-rast5.
else.
add lwa_bsadbsid-dmbtr to lwa_merged-rast6.
endif.
endif.
endif.
endif.
endif.
Update the merged record
modify pa_it_merged from lwa_merged index lva_merged_tabix.
endloop.
endform. " merge_data
*& Form build_field_catalog
text
form build_field_catalog tables pa_it_fieldcat type slis_t_fieldcat_alv.
Local work areas
data:
lwa_fieldcat type slis_fieldcat_alv.
--WG1K903216: Start Insert-
data: v_datum type datum,
v_mdmth type datum,
v_datxt type string,
v_noday type i.
--WG1K903216: End Insert---
refresh pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'KUNNR'.
lwa_fieldcat-ref_tabname = 'KNA1'.
lwa_fieldcat-ref_fieldname = 'KUNNR'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '1'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'NAME1'.
lwa_fieldcat-ref_tabname = 'ADRC'.
lwa_fieldcat-ref_fieldname = 'NAME1'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '2'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'CITY1'.
lwa_fieldcat-ref_tabname = 'ADRC'.
lwa_fieldcat-ref_fieldname = 'CITY1'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '3'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'POST_CODE1'.
lwa_fieldcat-ref_tabname = 'ADRC'.
lwa_fieldcat-ref_fieldname = 'POST_CODE1'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '4'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'STREET'.
lwa_fieldcat-ref_tabname = 'ADRC'.
lwa_fieldcat-ref_fieldname = 'STREET'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '5'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'HOUSE_NUM1'.
lwa_fieldcat-ref_tabname = 'ADRC'.
lwa_fieldcat-ref_fieldname = 'HOUSE_NUM1'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '6'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'TEL_NUMBER'.
lwa_fieldcat-ref_tabname = 'ADRC'.
lwa_fieldcat-ref_fieldname = 'TEL_NUMBER'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '7'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'FAX_NUMBER'.
lwa_fieldcat-ref_tabname = 'ADRC'.
lwa_fieldcat-ref_fieldname = 'FAX_NUMBER'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '8'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'NAMEV'.
lwa_fieldcat-ref_tabname = 'KNVK'.
lwa_fieldcat-ref_fieldname = 'NAMEV'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '9'.
lwa_fieldcat-seltext_l = 'Contact first name'.
lwa_fieldcat-seltext_m = 'Contact Fname'.
lwa_fieldcat-seltext_s = 'Ctct Fname'.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'NAMEW'.
lwa_fieldcat-ref_tabname = 'KNVK'.
lwa_fieldcat-ref_fieldname = 'NAME1'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '10'.
lwa_fieldcat-seltext_l = 'Contact last name'.
lwa_fieldcat-seltext_m = 'Contact Lname'.
lwa_fieldcat-seltext_s = 'Ctxt Lname'.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'TELF1'.
lwa_fieldcat-ref_tabname = 'KNVK'.
lwa_fieldcat-ref_fieldname = 'TELF1'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '11'.
lwa_fieldcat-seltext_l = 'Contact phone no.'.
lwa_fieldcat-seltext_m = 'Contact phone'.
lwa_fieldcat-seltext_s = 'Ctct Phne'.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'KLIMK'.
lwa_fieldcat-ref_tabname = 'KNKK'.
lwa_fieldcat-ref_fieldname = 'KLIMK'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '12'.
lwa_fieldcat-seltext_l = 'Credit limit'.
lwa_fieldcat-seltext_m = 'Credit limit'.
lwa_fieldcat-seltext_s = 'Crdt limit'.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'SKFOR'.
lwa_fieldcat-ref_tabname = 'KNKK'.
lwa_fieldcat-ref_fieldname = 'SKFOR'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '13'.
lwa_fieldcat-seltext_l = 'Credit used'.
lwa_fieldcat-seltext_m = 'Credit used'.
lwa_fieldcat-seltext_s = 'Crdt used'.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'TOTAL'.
lwa_fieldcat-ref_tabname = 'BSAD'.
lwa_fieldcat-ref_fieldname = 'DMBTR'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '14'.
lwa_fieldcat-seltext_l = 'Total'.
lwa_fieldcat-seltext_m = 'Total'.
lwa_fieldcat-seltext_s = 'Total'.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'RAST1'.
lwa_fieldcat-ref_tabname = 'BSAD'.
lwa_fieldcat-ref_fieldname = 'DMBTR'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '15'.
--WG1K903216: Start Delete-
concatenate '<'
rastbis2
into lwa_fieldcat-seltext_l
separated by space.
--WG1K903216: End Delete---
--WG1K903216: Start Insert-
clear: v_datum,
v_datxt.
v_noday = rastbis2.
Always use the middle of the report month as a heading reference date.
concatenate p_datum+0(6) '15' into v_mdmth.
call function 'ZWAG_DATE_CALCULATOR'
exporting i_datum = v_mdmth
i_noday = v_noday
i_oprnd = '+'
importing e_datum = v_datum
exceptions invalid_operand = 1.
call function 'ZWAG_END_MONTH'
exporting i_datum = v_datum
importing e_datum = v_datum
e_datxt = v_datxt
exceptions invalid_date = 1.
concatenate 'Due' v_datxt into lwa_fieldcat-seltext_l
separated by space.
--WG1K903216: End Insert---
lwa_fieldcat-seltext_m = lwa_fieldcat-seltext_l.
lwa_fieldcat-seltext_s = lwa_fieldcat-seltext_l.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'RAST2'.
lwa_fieldcat-ref_tabname = 'BSAD'.
lwa_fieldcat-ref_fieldname = 'DMBTR'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '16'.
--WG1K903216: Start Delete-
concatenate rastbis1
rastbis2
into lwa_fieldcat-seltext_l
separated by co_delim_dash.
--WG1K903216: End Delete---
--WG1K903216: Start Insert-
clear: v_datum,
v_datxt.
v_noday = rastbis1.
call function 'ZWAG_DATE_CALCULATOR'
exporting i_datum = v_mdmth
i_noday = v_noday
i_oprnd = '+'
importing e_datum = v_datum
exceptions invalid_operand = 1.
call function 'ZWAG_END_MONTH'
exporting i_datum = v_datum
importing e_datum = v_datum
e_datxt = v_datxt
exceptions invalid_date = 1.
concatenate 'Due' v_datxt into lwa_fieldcat-seltext_l
separated by space.
--WG1K903216: End Insert---
lwa_fieldcat-seltext_m = lwa_fieldcat-seltext_l.
lwa_fieldcat-seltext_s = lwa_fieldcat-seltext_l.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'RAST3'.
lwa_fieldcat-ref_tabname = 'BSAD'.
lwa_fieldcat-ref_fieldname = 'DMBTR'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '17'.
--WG1K903216: Start Delete-
concatenate rastbis2
rastbis3
into lwa_fieldcat-seltext_l
separated by co_delim_dash.
--WG1K903216: End Delete---
--WG1K903216: Start Insert-
clear: v_datum,
v_datxt.
v_noday = rastbis2.
call function 'ZWAG_DATE_CALCULATOR'
exporting i_datum = v_mdmth
i_noday = v_noday
i_oprnd = '-'
importing e_datum = v_datum
exceptions invalid_operand = 1.
call function 'ZWAG_END_MONTH'
exporting i_datum = v_datum
importing e_datum = v_datum
e_datxt = v_datxt
exceptions invalid_date = 1.
concatenate 'Due' v_datxt into lwa_fieldcat-seltext_l
separated by space.
--WG1K903216: End Insert---
lwa_fieldcat-seltext_m = lwa_fieldcat-seltext_l.
lwa_fieldcat-seltext_s = lwa_fieldcat-seltext_l.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'RAST4'.
lwa_fieldcat-ref_tabname = 'BSAD'.
lwa_fieldcat-ref_fieldname = 'DMBTR'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '18'.
--WG1K903216: Start Delete-
concatenate rastbis3
rastbis4
into lwa_fieldcat-seltext_l
separated by co_delim_dash.
--WG1K903216: End Delete---
--WG1K903216: Start Insert-
clear: v_datum,
v_datxt.
v_noday = rastbis3.
call function 'ZWAG_DATE_CALCULATOR'
exporting i_datum = v_mdmth
i_noday = v_noday
i_oprnd = '-'
importing e_datum = v_datum
exceptions invalid_operand = 1.
call function 'ZWAG_END_MONTH'
exporting i_datum = v_datum
importing e_datum = v_datum
e_datxt = v_datxt
exceptions invalid_date = 1.
concatenate 'Due' v_datxt into lwa_fieldcat-seltext_l
separated by space.
--WG1K903216: End Insert---
lwa_fieldcat-seltext_m = lwa_fieldcat-seltext_l.
lwa_fieldcat-seltext_s = lwa_fieldcat-seltext_l.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'RAST5'.
lwa_fieldcat-ref_tabname = 'BSAD'.
lwa_fieldcat-ref_fieldname = 'DMBTR'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '19'.
--WG1K903216: Start Delete-
concatenate rastbis4
rastbis5
into lwa_fieldcat-seltext_l
separated by co_delim_dash.
--WG1K903216: End Delete---
--WG1K903216: Start Insert-
clear: v_datum,
v_datxt.
v_noday = rastbis4.
call function 'ZWAG_DATE_CALCULATOR'
exporting i_datum = v_mdmth
i_noday = v_noday
i_oprnd = '-'
importing e_datum = v_datum
exceptions invalid_operand = 1.
call function 'ZWAG_END_MONTH'
exporting i_datum = v_datum
importing e_datum = v_datum
e_datxt = v_datxt
exceptions invalid_date = 1.
concatenate 'Due' v_datxt into lwa_fieldcat-seltext_l
separated by space.
--WG1K903216: End Insert---
lwa_fieldcat-seltext_m = lwa_fieldcat-seltext_l.
lwa_fieldcat-seltext_s = lwa_fieldcat-seltext_l.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'RAST6'.
lwa_fieldcat-ref_tabname = 'BSAD'.
lwa_fieldcat-ref_fieldname = 'DMBTR'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '20'.
--WG1K903216: Start Delete-
concatenate '>'
rastbis5
into lwa_fieldcat-seltext_l
separated by space.
--WG1K903216: End Delete---
--WG1K903216: Start Insert-
clear: v_datum,
v_datxt.
v_noday = rastbis5.
call function 'ZWAG_DATE_CALCULATOR'
exporting i_datum = v_mdmth
i_noday = v_noday
i_oprnd = '-'
importing e_datum = v_datum
exceptions invalid_operand = 1.
call function 'ZWAG_END_MONTH'
exporting i_datum = v_datum
importing e_datum = v_datum
e_datxt = v_datxt
exceptions invalid_date = 1.
concatenate 'Due By' v_datxt into lwa_fieldcat-seltext_l
separated by space.
--WG1K903216: End Insert---
lwa_fieldcat-seltext_m = lwa_fieldcat-seltext_l.
lwa_fieldcat-seltext_s = lwa_fieldcat-seltext_l.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
endform. " build_field_catalog
*& Form output_report_via_alv
text
form output_report_via_alv
tables pa_it_fieldcat type slis_t_fieldcat_alv
pa_it_merged type ty_it_merged.
Local variables
data:
lva_repid like sy-repid,
lva_formname type slis_formname.
lva_repid = sy-repid.
lva_formname = 'USER_COMMAND'.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = lva_repid
i_callback_user_command = lva_formname
i_save = 'A'
is_variant = st_variant
it_fieldcat = pa_it_fieldcat[]
tables
t_outtab = pa_it_merged
exceptions
program_error = 1
others = 2.
endform. " output_report_via_alvHi shiva
Thanks for your help,
Can you check this coding and revert me back ASAP Please.
REPORT BDS_GOS_CONNECTION.
DATA : logical_system LIKE BAPIBDS01-log_system.
CLASSNAME LIKE BAPIBDS01-CLASSNAME
OBJKEY LIKE SWOTOBJID-objkey.
PARAMETERS: pa_lo_sys BAPIBDS01-log_system,
pa_class like BPIBDS01-CLASSNAME,
pa_objkey like swotobjidobjkey.
AT SELECTION-SCREEN.
CALL FUNCTION 'BDS_GOS_CONNECTIONS_GET'
EXPORTING
bor_id = bor_id
IMPORTING
logical_sytem = pa_lo_sys.
classname = pa_class.
objkey = pa_objkey.
EXCEPTIONS
no_objects_found = 1
internal_error = 2
internal_gos_error = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
clear v_attno1.
i_object1-typeid = 'BUS2012'.
i_object1-catid = 'BO'.
i_object1-instid = i_yItem-docno.
call method cl_gos_attachment_query=>count_for_object
exporting
is_object = i_object1
ip_arl = space
receiving
rt_stat = i_stat1.
read table i_stat1 into wa_stat1 index 1.
if sy-subrc eq c_0.
move wa_stat1-counter to v_attno1.
endif.
CALL METHOD cl_gos_attachment_query=>count_for_object
EXPORTING
is_object = object
ip_arl = space
RECEIVING
rt_stat = lt_stat.
READ TABLE lt_stat INDEX 1 into ls_stat.
count = ls_stat-counter.
*The object has to be a concatenation of your document, like this:
CONCATENATE object-instid tab-gjahr INTO object-instid.
ELSE.
CONCATENATE tab-bukrs tab-belnr tab-gjahr INTO
object-instid.
ENDIF. -
FUNCTION IS NOT WORKING WHEN RUN IN SRW.RUN_REPORT, URGENT
Hi,
I have a report. it has got 1 Query and 2 groups.
Q1
|
|
__G1__
|F1 |
|F2 |
|F3 |
|
|
|
__G2__
|Items|
|Sales|
| Qty|
|Store|
|Func4|
|Func5|
|Func6|
The Query looks like above. Now In the report I have a 3 User parameters . For Each record in G2 the functions Func4,Func5 and Func6 adds the value to the user parameters at the report level.
Now the Func1,Func2,Func3 takes the value of last 4 record for each item at each G1 Level and devides it by 4 and prints . As an example given below
ITEMS-----SALES-------QTY-----------STORE
10001-----10000-------200-------------100
10001-----20000-------500-------------200
10001-----15000-------350-------------175
10001-----45000-------650-------------225
10001-----50000-------700-------------300
AVERAGE==>32500-------550-------------225 ==> Calculated by F1,F2,F3
20001-----70000-------900-------------400
20001-----30000-------600-------------350
20001-----20000-------500-------------300
20001-----25000-------450-------------275
20001-----35000-------550-------------225
20001-----65000-------800-------------400
AVERAGE==>36250-------650-------------300 ==> Avg of last 4 records
This report takes an parameter which is part of the Where condition of the Query Q1. If I run this report from the report builder and provide the value for the parameter then the report runs fine printing the exact values. If I run the report from another report(which I have to do, due to circumstances) using SRW.Run_Report and pass the parameter in the same command. The the function FUNC4, FUNC5, FUNC6 does not do the addition, as a result the Func1,Func2,Func3 returns 0. I dont know why this is happenning .
This is very very URGENT, My project manager is on my head to finish it ASAP. Please help.
Thanks
FerozHi Toby and Danny,
Thanks for the quick reply. I dont think I am having an interdependancy of the functions. Here is an sample what two functions do at each level
Func6 =========> This function at group level G2
begin
-- To initialize the user parameter for each new item.
If :CNT = 1 Then
:Wk4_Pos_Qty := 0;
End If;
-- to add the qty value to the user parameter for last 4 records. Uchange is the no of records for each item
If :CNT >= :UCHANGE - 3 Then
:Wk4_Pos_Qty := :Wk4_Pos_Qty + :Qty;
End If;
return 0;
end;
Func3 ======> this function at group level G1
Begin
-- if no of records are less than 4 then devide by the no of records or devide by 4.
If :UChange < 4 Then
return((:Wk4_Pos_Qty + :Qty) / :UChange);
Else
return((:Wk4_Pos_Qty + :Qty)/ 4);
End If;
end;
Here Wk4_Pos_Qty is the User parameter created to hold the calue for the Um of last 4 records Qty.
I tried to modify the Func3 so that it looks like this
Func3
begin
srw.reference(:Wk4_Pos_Qty);
If :UChange < 4 Then
return((:Wk4_Pos_Qty + :Qty) / :UChange);
Else
return((:Wk4_Pos_Qty + :Qty)/ 4);
End If;
end;
But it does not effect anything. I mean its the same. The Wk4_Pos_Qty returns 0 and Func3 returns 0.
Any Suggestions .
Thanks
Feroz -
IR report value from function error
i have ir report and one column value coming from function,when open the IR report its giving error..
IR report code
SELECT CS_ID ,CS_NAME, Util_func(PASS_ID) as "ALERT_DAYS" from "CSD_MASTERS" Function code
FUNCTION Util_func(PASS_ID NUMBER) RETURN number
IS
ALERT_DAYS NUMBER:=0;
BEGIN
select TO_DATE(CDS_DATE,'DD-MM-YYYY') - TO_DATE(SYSDATE,'DD-MM-YYYY')
INTO ALERT_DAYS
from CDS_TABBLE
where CDS_ID=PASS_ID AND
CDS_DATE between
sysdate and sysdate+15
group by CDS_DATE HAVING COUNT(*) <=1 ;
IF RECCOUNT>0 THEN
RETURN ALERT_DAYS;
ELSE
RETURN 'null';
END IF;
END;function calling CDS_TABBLE value
CDS_ID -- CDS_DATE
123 -- -- 4/23/2013
124 -- -- 4/24/2013
125 -- -- 4/25/2013
Thanx,
Ram
Edited by: Ramani_vadakadu on Apr 11, 2013 8:56 PMFUNCTION Util_func(PASS_ID NUMBER) RETURN number
IS
ALERT_DAYS NUMBER:=0;
CURSOR lcsr_GetAlertDayCount IS
select TO_DATE(CDS_DATE,'DD-MM-YYYY') - TO_DATE(SYSDATE,'DD-MM-YYYY')
from CDS_TABBLE
where CDS_ID=PASS_ID AND
CDS_DATE between sysdate and sysdate+15
group by CDS_DATE HAVING COUNT(*) <=1;
BEGIN
OPEN lcsr_GetAlertDayCount;
FETCH lcsr_GetAlertDayCount INTO ALERT_DAYS;
CLOSE lcsr_GetAlertDayCount;
RETURN ALERT_DAYS;
END; -
Sum function within if/then/else (xdofx:if)
I'm attempting to display a total at a particular group within my report. This total is conditional and should choose to display a placeholder value or the sum of another placeholder value (in a child group).
I have been able to vary my output based on the value I want to check: FIXED_QUOTE_FLAG - I have the if/then/else working in a simplified fashion
I can display literals and some placeholders correctlly eg. print a literal value of 00110011 or the value of placeholder QUOTED_PRICE
I can also display a calculated placeholder, using sum within the group I am concerned with: sum (current-group()/ACTIVITY_CHRG)
But when I try to get everythign working together ...
I cannot get the sum to work inside the if/then/else condition. The result is NULL (blank in HTML output).
The following is the snippet which is not working correctly:
<?xdofx:if FIXED_QUOTE_FLAG = 'Y' then QUOTED_PRICE else sum (current-group()/ACTIVITY_CHRG) end if?>
Message was edited by:
gareth_adamsonTo answer you first question, perhaps sum is not a supported function in the xdofx namespace. It's annoying when this problem comes up because xdofx namespace seems to be the only way to do if then else clauses. I'm not entirely certain on the above, but you could resort to using BI Publisher's built-in if statement.
For your problem, something like this:
<?if: FIXED_QUOTE_FLAG='Y'?>
QUOTED_PRICE
<?end if?>
<?if: FIXED_QUOTE_FLAG!='Y'?>
<?sum(current-group()/ACTIVITY_CHRG)?>
<?end if?>
EDIT:
There is a way to do if else without xdofx namespace. It is done with <?choose:?> <?when:?> and <?otherwise:?> tags. Here is example syntax copied from Tim Dexter's blog:
<?choose:?>
<?when:count(TRX_NUMBER) > 0?>
Invoice Table
<?end when?>
<?otherwise:?>
No Data Found
<?end otherwise?>
<?end choose?>
To answer the second question about a running total, you will need to use the <?xdoxslt:set_variable($_XDOCTX,'var_name',var_value)?> and the <?xdoxslt:get_variable($_XDOCTX,'var_name')?>. This method of working with variables is the only method that allows you to update a variable. This makes it good for running totals. Consult the official user guide under "Creating an RTF Template" the section about using variables and calculating running totals.
So, in your problem, once you get the first part working, you will have to add that value to your running total. It will look something like this:
<?xdoxslt:set_variable($_XDOCTX,'running_total',xdoxslt:get_variable($_XDOCTX,'running_total') + conditional_value)?>
Remember to initialize the running total to zero! Hope this helps.
Thanks,
Matt Soukup
Message was edited by:
Matt Soukup -
Photosmart c309a- 'The wireless radio is not functioning, contact HP support'
My Photosmart c309a wont connect wirelessly. Upon running the wireless network test, the report states, and I quote "The wireless radio is not functioning. Contact HP support". The report then states the following:
Wireless on PASS
Wireless working FAIL
and everything following that stated as 'not run'.
Ive searched for other threads on the subject, and the only sloutions I can find are unplug the printer and plug it back in to reset it (made no difference), and try the HP print and san doctor (link was dead, found it manually and didnt work as it cant connect to or even see the printer on the network).
So the question is, is this a hardware fault, and if so what can be done about it?Hello,
Yes, it is an hardware issue and indicates that the Wireless card is not functional.
Please call HP Tech Support for further assistance.
If you are in US , the toll free # is 1-800-474-6836 .
If you are not in US , then log on to www.hp.com , at bottom-left corner there is a world map icon, click on it and then select the region you belong to, which would then provide support options for you for that region.
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the white star under my name.
Click "Accept as Solution" if it solved your problem, so others can find it.
I work for HP
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.
Maybe you are looking for
-
How many monte should a new iPod 5g keeps the charge
How many minutes should a new iPod touch fifth generation should keep the charts
-
Some of our customer needs to include in AR Invoice some Returns as well Delivery and whose balance can be negative. In the same way, they would need to copy an AR Invoive or AP invoice with negative lines to AR or AP Credit Notes.
-
Reading/writing .ico files
I'm working on a coldfusion system where users can upload their own favicon files for their site. To allow compatibility with IE I want to allow for .ico files but I need to determine their dimensions so that I can limit the size. The restrictions of
-
Exchange server 2013 error called "403 Sorry! Access denied :"
I installed a domain and an exchange server on separate computers. After installed Exchange server 2013, tried to open "Exchange Administrative Center" there is an error message that is attached with this post and cannot go to the admin panel. so tr
-
Webcam problem with flash player
Hi, I am using flash v10.3.181.26 on a win7 machine with IE9, and trying to make it work with a virtual webcam (a directshow filter in the video capture category). I notice that the available formats are enumerated (I420 352x288 , RGB32 352x288 ) by