Functions to upload UNIX tab-delimited file
plz tell me lists of Functions to upload UNIX tab-delimited file in the database table
HI,
data : itab like standard table of ZCBU.
ld_file = p_infile.
OPEN DATASET ld_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
ELSE.
DO.
CLEAR: wa_string, wa_uploadtxt.
READ DATASET ld_file INTO wa_string.
IF sy-subrc NE 0.
EXIT.
ELSE.
SPLIT wa_string AT con_tab INTO wa_uploadtxt-name1
wa_uploadtxt-name2
wa_uploadtxt-age.
MOVE-CORRESPONDING wa_uploadtxt TO wa_upload.
APPEND wa_upload TO it_record.
ENDIF.
ENDDO.
CLOSE DATASET ld_file.
ENDIF.
loop at it_record.
itab-field1 = it_reocrd-field1.
itab-field2 = it_record-field2.
append itab.
endloop.
*-- Now update the table
modify ZCBU from table itab.
Similar Messages
-
anybody knws wats the fm to upload a tab delimited file?
I tried the fm gui_upload but its not workingI have used the HAS_FIELD_SEPARATOR = 'X', but only the first column is being transferred
data : p_file2 type string.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = p_file2
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
VIRUS_SCAN_PROFILE =
NO_AUTH_CHECK = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
DATA_TAB = gi_linepost
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. -
How to upload a TAB Delimited file and pls tell me the internal tble format
Hello All,
When i upload a TAB Delimited .txt file its giving me # Symbols in between the internal table fields.
pls advise.
Sureshdata: begin of wa_input,
plnnr(8) type c,
plnal(2) type c,
vornr(4) type c,
arbpl(8) type c,
steus(4) type c,
ltxa1(40) type c,
ltext(1000) type c,
end of wa_input.
data: i_input like wa_input occurs 0 with header line.
call function 'WS_UPLOAD'
exporting
filename = p_input " file path
filentype = 'DAT'
tables
data_tab = i_input
exceptions
file_open_error = 1
file_write_error = 2
invalid_filesize = 3
invalid_table_width = 4
invalid_type = 5
no_batch = 6
unknown_error = 7. -
UPLOADING tab delimited file onto FTP server
Hello all
Can i upload a tab delimited file onto the FTP server. If yes then how
points guranteed if answered!!Hi,
Yes you can do this one .. you can have a look at the standard program 'RSEPSFTP'.
REPORT ZFTPSAP LINE-SIZE 132.
DATA: BEGIN OF MTAB_DATA OCCURS 0,
LINE(132) TYPE C,
END OF MTAB_DATA.
DATA: MC_PASSWORD(20) TYPE C,
MI_KEY TYPE I VALUE 26101957,
MI_PWD_LEN TYPE I,
MI_HANDLE TYPE I.
START-OF-SELECTION.
*-- Your SAP-UNIX FTP password (case sensitive)
MC_PASSWORD = 'password'.
DESCRIBE FIELD MC_PASSWORD LENGTH MI_PWD_LEN.
*-- FTP_CONNECT requires an encrypted password to work
CALL 'AB_RFC_X_SCRAMBLE_STRING'
ID 'SOURCE' FIELD MC_PASSWORD ID 'KEY' FIELD MI_KEY
ID 'SCR' FIELD 'X' ID 'DESTINATION' FIELD MC_PASSWORD
ID 'DSTLEN' FIELD MI_PWD_LEN.
CALL FUNCTION 'FTP_CONNECT'
EXPORTING
*-- Your SAP-UNIX FTP user name (case sensitive)
USER = 'userid'
PASSWORD = MC_PASSWORD
*-- Your SAP-UNIX server host name (case sensitive)
HOST = 'unix-host'
RFC_DESTINATION = 'SAPFTP'
IMPORTING
HANDLE = MI_HANDLE
EXCEPTIONS
NOT_CONNECTED = 1
OTHERS = 2.
CHECK SY-SUBRC = 0.
CALL FUNCTION 'FTP_COMMAND'
EXPORTING
HANDLE = MI_HANDLE
COMMAND = 'dir'
TABLES
DATA = MTAB_DATA
EXCEPTIONS
TCPIP_ERROR = 1
COMMAND_ERROR = 2
DATA_ERROR = 3
OTHERS = 4.
IF SY-SUBRC = 0.
LOOP AT MTAB_DATA.
WRITE: / MTAB_DATA.
ENDLOOP.
ELSE.
* do some error checking.
WRITE: / 'Error in FTP Command'.
ENDIF.
CALL FUNCTION 'FTP_DISCONNECT'
EXPORTING
HANDLE = MI_HANDLE
EXCEPTIONS
OTHERS = 1.
Regards
Sudheer -
Upload tab-delimited file from the application server to an internal table
Hello SAPients.
I'm using OPEN DATASET..., READ DATASET..., CLOSE DATASET to upload a file from the application server (SunOS). I'm working with SAP 4.6C. I'm trying to upload a tab-delimited file to an internal table but when I try load it the fields are not correctly separated, in fact, they are all misplaced and the table shows '#' where supposedly there was a tab.
I tried to SPLIT the line using as separator a variable with reference to CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB but for some reason that class doesn't exist in my system.
Do you know what I'm doing wrong? or Do you know a better method to upload a tab-delimited file into an internal table?
Thank you in advance for your help.Try:
REPORT ztest MESSAGE-ID 00.
PARAMETER: p_file LIKE rlgrap-filename OBLIGATORY.
DATA: BEGIN OF data_tab OCCURS 0,
data(4096),
END OF data_tab.
DATA: BEGIN OF vendor_file_x OCCURS 0.
* LFA1 Data
DATA: mandt LIKE bgr00-mandt,
lifnr LIKE blf00-lifnr,
anred LIKE blfa1-anred,
bahns LIKE blfa1-bahns,
bbbnr LIKE blfa1-bbbnr,
bbsnr LIKE blfa1-bbsnr,
begru LIKE blfa1-begru,
brsch LIKE blfa1-brsch,
bubkz LIKE blfa1-bubkz,
datlt LIKE blfa1-datlt,
dtams LIKE blfa1-dtams,
dtaws LIKE blfa1-dtaws,
erdat LIKE lfa1-erdat,
ernam LIKE lfa1-ernam,
esrnr LIKE blfa1-esrnr,
konzs LIKE blfa1-konzs,
ktokk LIKE lfa1-ktokk,
kunnr LIKE blfa1-kunnr,
land1 LIKE blfa1-land1,
lnrza LIKE blfa1-lnrza,
loevm LIKE blfa1-loevm,
name1 LIKE blfa1-name1,
name2 LIKE blfa1-name2,
name3 LIKE blfa1-name3,
name4 LIKE blfa1-name4,
ort01 LIKE blfa1-ort01,
ort02 LIKE blfa1-ort02,
pfach LIKE blfa1-pfach,
pstl2 LIKE blfa1-pstl2,
pstlz LIKE blfa1-pstlz,
regio LIKE blfa1-regio,
sortl LIKE blfa1-sortl,
sperr LIKE blfa1-sperr,
sperm LIKE blfa1-sperm,
spras LIKE blfa1-spras,
stcd1 LIKE blfa1-stcd1,
stcd2 LIKE blfa1-stcd2,
stkza LIKE blfa1-stkza,
stkzu LIKE blfa1-stkzu,
stras LIKE blfa1-stras,
telbx LIKE blfa1-telbx,
telf1 LIKE blfa1-telf1,
telf2 LIKE blfa1-telf2,
telfx LIKE blfa1-telfx,
teltx LIKE blfa1-teltx,
telx1 LIKE blfa1-telx1,
xcpdk LIKE lfa1-xcpdk,
xzemp LIKE blfa1-xzemp,
vbund LIKE blfa1-vbund,
fiskn LIKE blfa1-fiskn,
stceg LIKE blfa1-stceg,
stkzn LIKE blfa1-stkzn,
sperq LIKE blfa1-sperq,
adrnr LIKE lfa1-adrnr,
mcod1 LIKE lfa1-mcod1,
mcod2 LIKE lfa1-mcod2,
mcod3 LIKE lfa1-mcod3,
gbort LIKE blfa1-gbort,
gbdat LIKE blfa1-gbdat,
sexkz LIKE blfa1-sexkz,
kraus LIKE blfa1-kraus,
revdb LIKE blfa1-revdb,
qssys LIKE blfa1-qssys,
ktock LIKE blfa1-ktock,
pfort LIKE blfa1-pfort,
werks LIKE blfa1-werks,
ltsna LIKE blfa1-ltsna,
werkr LIKE blfa1-werkr,
plkal LIKE lfa1-plkal,
duefl LIKE lfa1-duefl,
txjcd LIKE blfa1-txjcd,
sperz LIKE lfa1-sperz,
scacd LIKE blfa1-scacd,
sfrgr LIKE blfa1-sfrgr,
lzone LIKE blfa1-lzone,
xlfza LIKE lfa1-xlfza,
dlgrp LIKE blfa1-dlgrp,
fityp LIKE blfa1-fityp,
stcdt LIKE blfa1-stcdt,
regss LIKE blfa1-regss,
actss LIKE blfa1-actss,
stcd3 LIKE blfa1-stcd3,
stcd4 LIKE blfa1-stcd4,
ipisp LIKE blfa1-ipisp,
taxbs LIKE blfa1-taxbs,
profs LIKE blfa1-profs,
stgdl LIKE blfa1-stgdl,
emnfr LIKE blfa1-emnfr,
lfurl LIKE blfa1-lfurl,
j_1kfrepre LIKE blfa1-j_1kfrepre,
j_1kftbus LIKE blfa1-j_1kftbus,
j_1kftind LIKE blfa1-j_1kftind,
confs LIKE lfa1-confs,
updat LIKE lfa1-updat,
uptim LIKE lfa1-uptim,
nodel LIKE blfa1-nodel.
DATA: END OF vendor_file_x.
FIELD-SYMBOLS: <field>,
<field_1>.
DATA: delim TYPE x VALUE '09'.
DATA: fld_chk(4096),
last_char,
quote_1 TYPE i,
quote_2 TYPE i,
fld_lth TYPE i,
columns TYPE i,
field_end TYPE i,
outp_rec TYPE i,
extras(3) TYPE c VALUE '.,"',
mixed_no(14) TYPE c VALUE '1234567890-.,"'.
OPEN DATASET p_file FOR INPUT.
DO.
READ DATASET p_file INTO data_tab-data.
IF sy-subrc = 0.
APPEND data_tab.
ELSE.
EXIT.
ENDIF.
ENDDO.
* count columns in output structure
DO.
ASSIGN COMPONENT sy-index OF STRUCTURE vendor_file_x TO <field>.
IF sy-subrc <> 0.
EXIT.
ENDIF.
columns = sy-index.
ENDDO.
* Assign elements of input file to internal table
CLEAR vendor_file_x.
IF columns > 0.
LOOP AT data_tab.
DO columns TIMES.
ASSIGN space TO <field>.
ASSIGN space TO <field_1>.
ASSIGN COMPONENT sy-index OF STRUCTURE vendor_file_x TO <field>.
SEARCH data_tab-data FOR delim.
IF sy-fdpos > 0.
field_end = sy-fdpos + 1.
ASSIGN data_tab-data(sy-fdpos) TO <field_1>.
* Check that numeric fields don't contain any embedded " or ,
IF <field_1> CO mixed_no AND
<field_1> CA extras.
TRANSLATE <field_1> USING '" , '.
CONDENSE <field_1> NO-GAPS.
ENDIF.
* If first and last characters are '"', remove both.
fld_chk = <field_1>.
IF NOT fld_chk IS INITIAL.
fld_lth = strlen( fld_chk ) - 1.
MOVE fld_chk+fld_lth(1) TO last_char.
IF fld_chk(1) = '"' AND
last_char = '"'.
MOVE space TO fld_chk+fld_lth(1).
SHIFT fld_chk.
MOVE fld_chk TO <field_1>.
ENDIF. " for if fld_chk(1)=" & last_char="
ENDIF. " for if not fld_chk is initial
* Replace "" with "
DO.
IF fld_chk CS '""'.
quote_1 = sy-fdpos.
quote_2 = sy-fdpos + 1.
MOVE fld_chk+quote_2 TO fld_chk+quote_1.
ELSE.
MOVE fld_chk TO <field_1>.
EXIT.
ENDIF.
ENDDO.
<field> = <field_1>.
ELSE.
field_end = 1.
ENDIF.
SHIFT data_tab-data LEFT BY field_end PLACES.
ENDDO.
APPEND vendor_file_x.
CLEAR vendor_file_x.
ENDLOOP.
ENDIF.
CLEAR data_tab.
REFRESH data_tab.
FREE data_tab.
Rob -
Detecting line-breaks within a column of an uploaded tab-delimited file.
Suppose you upload a tab-delimited file from your laptop and split each row of the file into some structure that you append to an itab.
Is there a way inside ABAP to detect that a field of the uploaded file has a CR or CRLF in it? And if so, where it is ?
Thanks in advance ...You can use any of the following for those char.
DATA: head_crnl(1) TYPE c VALUE cl_abap_char_utilities=>cr_lf,
top_crnl(1) TYPE c VALUE cl_abap_char_utilities=>cr_lf,
end_crnl(1) TYPE c VALUE cl_abap_char_utilities=>cr_lf,
blank_crnl(1) TYPE c VALUE cl_abap_char_utilities=>cr_lf,
final_crnl(1) TYPE c VALUE cl_abap_char_utilities=>cr_lf,
first_pgbr(1) TYPE c VALUE cl_abap_char_utilities=>form_feed.
Declare the above variables and check if they occur in the file. Hope this helps. -
Program to upload data from a tab-delimited file ...
I have to upload data from a tab-delimited file with following fields into database table(ZCBU) with same fields:
CBU (parent)
KUNNR (child)
ERDAT (effective from)
MANDT (client)
SFID (salesforce ID)
AEDAT (effective to)
AENAM (assigned by).
This file can be of type PC(txt) or UNIX.
plz tell me how to do this in both type of filesHi,
DATA: bdcdata LIKE bdcdata OCCURS 0 WITH HEADER LINE.
DATA: xfile TYPE string.
DATA: BEGIN OF itab OCCURS 0,
empno TYPE zmemp-empno,
name TYPE zmemp-first_name,
last TYPE zmemp-last_name,
comp TYPE zmemp-comp,
place TYPE zmemp-place,
END OF itab.
PARAMETER : p_file TYPE rlgrap-filename OBLIGATORY.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
Form to get the file path of legacy data stored on presentation server
PERFORM get_file_path.
START-OF-SELECTION.
MOVE p_file TO xfile.
to get the data from excel sheet data into an internal table
PERFORM get_data.
LOOP AT itab .
REFRESH bdcdata.
PERFORM bdc_dynpro USING 'ZM_EMPLOYEE' '9001'.
PERFORM bdc_field USING 'BDC_CURSOR'
'S9001_EMPNO'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=CREA'.
PERFORM bdc_field USING 'S9001_EMPNO'
itab-empno.
PERFORM bdc_dynpro USING 'ZM_EMPLOYEE' '9002'.
PERFORM bdc_field USING 'BDC_CURSOR'
'S9002_PLACE'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=SAVE'.
PERFORM bdc_field USING 'S9002_EMPNO'
itab-empno.
PERFORM bdc_field USING 'S9002_FIRST_NAME'
itab-name.
PERFORM bdc_field USING 'S9002_LAST_NAME'
itab-last.
PERFORM bdc_field USING 'S9002_COMP'
itab-comp.
PERFORM bdc_field USING 'S9002_PLACE'
itab-place.
PERFORM bdc_dynpro USING 'ZM_EMPLOYEE' '9001'.
PERFORM bdc_field USING 'BDC_CURSOR'
'S9001_EMPNO'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=BACK'.
CALL TRANSACTION 'ZMEMP'
USING bdcdata
UPDATE 'A'
MODE 'N'.
ENDLOOP.
Start new screen *
FORM bdc_dynpro USING program dynpro.
CLEAR bdcdata.
bdcdata-program = program.
bdcdata-dynpro = dynpro.
bdcdata-dynbegin = 'X'.
APPEND bdcdata.
ENDFORM. "BDC_DYNPRO
Insert field *
FORM bdc_field USING fnam fval.
CLEAR bdcdata.
bdcdata-fnam = fnam.
bdcdata-fval = fval.
APPEND bdcdata.
ENDFORM. "BDC_FIELD
*& Form get_file_path
FORM get_file_path .
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
CHANGING
file_name = p_file.
ENDFORM. " get_file_path
*& Form get_data
FORM get_data .
DATA : lines1 TYPE i.
MOVE p_file TO xfile.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = xfile
filetype = 'ASC'
has_field_separator = 'X'
TABLES
data_tab = itab.
DESCRIBE TABLE itab LINES lines1.
WRITE : / lines1 , 'REcords uploaded' .
ENDFORM. " get_data
Regards,
Nihar Swain, -
Parse tab delimited file after upload
I could use some advice. I have a requirement to parse and insert an uploaded, tab delimited file using APEX. Directly off of the file system, I would do this with an external table, but here I am uploading the file into a CLOB field. Does PL/SQL have any native functions to parse delimited files?
The user will not have access to the data load part of APEX, although I have seen numerous requests on this forum for that functionality to be added to the user GUI. Thoughts?j,
I wrote this a while ago...
http://www.danielmcghan.us/2009/02/easy-csv-uploads-yes-we-can.html
I've since improved the code a little bit. If you like the solution, I could do a new post with the latest code.
Regards,
Dan
Blog: http://DanielMcGhan.us/
Work: http://SkillBuilders.com/ -
Small doubt reg upload from tab delimited text file
Hi all,
i am uploading a tab delimited text file to a ztable.
I moving the text file in to internal table
data : begin of i_tab occurs 0,
text(1024) type c,
end of i_tab.
then i have passed to FM GUI_UPLOAD.
and then splitting
loop at i_tab.
split i_tab at con_tab
into i_xyz-matnr
i_xyz-werks.
append i_xyz.
endloop..
is this the right approach . iam getting the results but iam just curious to know.
Do i need to internal like the one i created
data : begin of i_tab occurs 0,
text(1024) type c,
end of i_tab.
or do i need to create one with field that i have in text file.
data : begin of i_tab occurs 0,
matnr like mara-matnr,
werks like marc-werks
end of i_tab.
WHICH ONE OF THE TWO IS RIGHT.
THANKS IN ADVANCEThere will be NO difference,i guess in the 2 methods.
you can use which you like.
Check the below program,i also given quantity fields F2,F3.
its working fine
REPORT ZSRIM_TEMP13.
data : begin of itab occurs 0,
f1(20) type c,
f2 type i,
f3(10) type p DECIMALS 2,
end of itab.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = 'c:a.txt'
FILETYPE = 'ASC'
<b>HAS_FIELD_SEPARATOR = 'X'</b>
* HEADER_LENGTH = 0
* READ_BY_LINE = 'X'
* DAT_MODE = ' '
* CODEPAGE = ' '
* IGNORE_CERR = ABAP_TRUE
* REPLACEMENT = '#'
* CHECK_BOM = ' '
* VIRUS_SCAN_PROFILE = VIRUS_SCAN_PROFILE
* NO_AUTH_CHECK = ' '
* IMPORTING
* FILELENGTH = FILELENGTH
* HEADER = HEADER
TABLES
DATA_TAB = ITAB
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT ITAB.
WRITE :/ ITAB-F1, ITAB-F2,ITAB-F3.
ENDLOOP.
my input file i created with TAB seperated text file,
here is the input file
LINE1 1000 123.25
LINE2 2000 234.25
LINE3 3000 345.25
LINE1 1000 123.25
LINE2 2000 234.25
LINE3 3000 345.25
Regards
Srikanth
Message was edited by: Srikanth Kidambi -
Pgm to upload a tab delimited text file
Hi ,
can anyone send me a program to upload a tab delimited text file into a ztable.
My email id is : [email protected]
Thanks
KajolCheck the below code:
*& Report Z_UPLOAD_MUNCPCODE *
REPORT z_upload_muncpcode.
PARAMETERS : p_fname LIKE rlgrap-filename.
TYPES: BEGIN OF ty_munc,
land1 TYPE tzone-land1,
zone1 TYPE tzone-zone1,
vtext TYPE tzont-vtext,
END OF ty_munc.
DATA: i_munc TYPE STANDARD TABLE OF ty_munc,
i_tzone TYPE STANDARD TABLE OF tzone,
i_tzont TYPE STANDARD TABLE OF tzont,
wa_munc TYPE ty_munc,
wa_tzone TYPE tzone,
wa_tzont TYPE tzont.
CONSTANTS: c_path TYPE char20 VALUE 'C:\',
c_mask TYPE char9 VALUE ',*.*,*.*.',
c_mode TYPE char1 VALUE 'O',
c_filetype TYPE char10 VALUE 'ASC',
c_x TYPE char01 VALUE 'X'.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_fname.
*-- Browse Presentation Server
PERFORM f4_presentation_file.
START-OF-SELECTION..
*-- Read presentation server file
PERFORM f1003_pre_file.
LOOP AT i_munc INTO wa_munc.
wa_tzone-mandt = wa_tzont-mandt = sy-mandt.
wa_tzone-land1 = wa_tzont-land1 = wa_munc-land1.
wa_tzone-zone1 = wa_tzont-zone1 = wa_munc-zone1.
wa_tzont-spras = sy-langu.
wa_tzont-vtext = wa_munc-vtext.
APPEND wa_tzont TO i_tzont.
APPEND wa_tzone TO i_tzone.
CLEAR: wa_munc, wa_tzont, wa_tzone.
ENDLOOP.
END-OF-SELECTION.
Modify Table TZONT
PERFORM enqueue_table USING text-001.
MODIFY tzont FROM TABLE i_tzont.
PERFORM dequeue_table USING text-001.
Modify Table TZONE
PERFORM enqueue_table USING text-002.
MODIFY tzone FROM TABLE i_tzone.
PERFORM dequeue_table USING text-002.
WRITE: 'Tables TZONE & TZONT are updated'.
*& Form f4_presentation_file
*& F4 Help for presentation server
FORM f4_presentation_file .
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
def_path = c_path
mask = c_mask
mode = c_mode
title = text-001
IMPORTING
filename = p_fname
EXCEPTIONS
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " f4_presentation_file
*& Form f1003_pre_file
*& Upload File
FORM f1003_pre_file .
DATA: lcl_filename TYPE string.
lcl_filename = p_fname.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = lcl_filename
filetype = c_filetype
has_field_separator = c_x
TABLES
data_tab = i_munc
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
EXIT.
ENDIF.
ENDFORM. " f1003_pre_file
*& Form enqueue_table
*& Enqueue Table
FORM enqueue_table USING p_tabname.
CALL FUNCTION 'ENQUEUE_E_TABLE'
EXPORTING
tabname = p_tabname
EXCEPTIONS
foreign_lock = 1
system_failure = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " enqueue_table
*& Form dequeue_table
*& Dequeue Table
FORM dequeue_table USING p_tabname.
CALL FUNCTION 'DEQUEUE_E_TABLE'
EXPORTING
tabname = p_tabname.
ENDFORM. " dequeue_table
Regards,
Prakash. -
Trouble importing contacts from a tab-delimited file into Contacts on 10.9.5
I am having Trouble importing contacts from a tab-delimited file into Contacts on MacBook Pro, OS 10.9.5, Intel 2.4 GHz Core 2 Duo., 400GB drive, 4GB memory DDR3
So far I have:
- Followed closely the help screen in Contacts app
- Modified my source document meticulously - first in MS Word, then copied and tweaked in Apple's "Text Edit" app
- The problem arises when I go to access the document for import. Specifically, the target document, and all others in that file, are "greyed out" and thus can't be "opened" to facilitate the import process
- Tried changing the extension of the document name to ".txt", ".rtf", and ".rtd". No change or improvement.
- Searched Apple.com/help and found nothing relevant
Can anyone offer some advice or tell me what I may be overlooking in this process?
Any help will be greatly appreciated!
Thanks,
<Email Edited By Host>Hi Rammohan,
Thanks for the effort!
But I don't need to use GUI upload because my functionality does not require to fetch data from presentation server.
Moreover, the split command advised by you contains separate fields...f1, f2, f3... and I cannot use it because I have 164 fields. I will have to split into 164 fields and assign the values back to 164 fields in the work area/header line.
Moreover I have about 10 such work areas. so the effort would be ten times the above effort! I want to avoid this! Please help!
I would be very grateful if you could provide an alternative solution.
Thanks once again,
Best Regards,
Vinod.V -
GUI_Download problem in tab delimited file
Hi,
I am trying to download tab delimited file using F.M GUI_DOWNLOAD.We have
4.6C version.I have declared internal table with 5 columns.The file created using F.M is very strange.Column 1 and 2 and 3 and 4 are seaprated by tab but column 2
and 3 and column 4 and 5 are not seaprated by tab but have fixed length.
I am not getting where I am doing mistake.Any help is appericiated.
Below is the structure of internal table.
DATA:BEGIN OF IT_FINAL OCCURS 0,
Company(3) type c,
County(30) type c,
FId(35) type c,
Wellno(15) type c,
Welldesc(35) type c,
END OF IT_FINAL.
Data populated in table it_final.
it_final-Company = '300'.
it_final-County = 'Greenwood'.
it_final-fid = 'testts'.
it_final-wellno = '10000000'.
it_final-welldesc = 'tebsbvd'.
append it_final.
F.M GUI_DOWNLOAD
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
filename = l_path
FILETYPE = 'ASC'
APPEND = ' '
write_field_separator = 'X'
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
IMPORTING
FILELENGTH =
TABLES
data_tab = it_final
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
OTHERS = 22
Thanks,
Rekha.Hi,
i think it is because tou need to uncomment:
FILETYPE = 'ASC'
try it.
Best regards. -
Import text into a form from a tab delimited file using an action
Good evening.
I am using Adobe Acrobat XI Pro
I have been working all weekend so far on this, and have tried many options.
What I am wanting is to import a line of data from an excel file into a form, save the file with a name drived from the form fields, close the new file, then go back to the original file, import a line of data, and so on and so on.
I had all of this working in livecyle with a tool, but now that we are going to Windows 8 and Microsoft Office 2013, the driver that I need to load the excel file into the form is not available--so now I have to redo the forms in Adobe and import using a tab delimited file.
I would like to do this with an action.
Thus far, I have the following.
**Credit goes to George Johnson who helped me with the script to save the file using field names a few months ago**
To start, I have a folder level script
mySaveAs = app.trustPropagatorFunction(function(doc,path)
app.beginPriv();
var myDoc = event.target;
myDoc.saveAs(path);
app.endPriv();
myTrustedSpecialTaskFunc = app.trustedFunction(function(doc,path)
//privileged and/or non-privileged code above
app.beginPriv();
mySaveAs(doc, path);
app.endPriv
//Privileged and/or non-privileged code below
For the Action, I start with the Form file loaded
Then I execute a javascript to import the text into the file.
this.importTextData("/c/data/clerical.txt");
The next step is to save the file using field names as part of the file name
--credit goes to George Johnson who assisted me with this on a similar project a few months ago.
//Get the Field Value
var fn=getField("Last").valueAsString + "-" + getField("First").valueAsString;
//Specify the folder
var fldr = "/c/data/";
//Determine the full path
var fp=fldr + fn + ".pdf";
//save the file
myTrustedSpecialTaskFunc(this, fp);
That is as far as I have gotten.
What I want to do now is load the original form file, import the next line into the form, save the file, repeat.
If anyone could assist me, I would greatly appreciate it.
**note I had to type this from my I-pad because I kept getting kicked off the internet from my computer. I hope my code is typed correctly.George
Thank you so much for your response.
Yes--there are multiple lines in the data file--it will vary from month to month. It looks like from what you are saying is that I need to do the global variable since it will constantly change, and then increment it as it goes through the text file. When it reaches the end, then it will stop.
I looked at the following links--but this is from Adobe 9 API--I don't know if things have changed with XI--especially since 9 used batch processing and XI has actions.
Count PDF Files
http://help.adobe.com/livedocs/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/wwhelp/wwhimpl/js/html/ wwhelp.htm?href=JS_API_AcroJS.88.1.html
Global counter
http://help.adobe.com/livedocs/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/wwhelp/wwhimpl/js/html/ wwhelp.htm?href=JS_API_AcroJS.88.1.html
I am not exactly sure how to include this in my code.
If you could point me in the right direction, I would appreciate it. -
How to convert Mail attachment file Tab Delimited file to XML.
Hi PI Experts
I have XI scenario: MAIL XI SAP (ABAP Proxy), the process is
1. XI will receive tab delimited file as attachment in mail.
2. XI will convert the tab delimited file into XML, then map to the target structure.
3. Target will be posted into ECC through ABAP Proxy.
Can anyone help me how can I convert the attachment file (i.e. Tab delimited file) to XML while configuring the sender side.
Thanks in AdvanceI just grabed what I answered from another thread. It should work.
Processing sequence as follows:
1. localejbs/AF_Modules/PayloadSwapBean Local Enterprise Bean swap1
2. localejbs/AF_Modules/MessageTransformBean Local Enterprise Bean tran1
3. sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean Local Enterprise Bean mail
Module Configuration as follows: Fill the XXXX part with your info.
swap1 swap.keyName payload-name
swap1 swap.keyValue MailAttachment-1
tran1 Transform.Class com.sap.aii.messaging.adapter.Conversion
tran1 Transform.ContentType ext/xml;charset=utf-8
tran1 xml.conversionType SimplePlain2XML
tran1 xml.documentName XXXXXXX_Mail
tran1 xml.documentNamespace http://XXXXX.com.au/XXXX
tran1 xml.fieldSeparator \t
tran1 xml.processFieldNames fromConfiguration
tran1 xml.structureTitle rows
Once you set up the above configuration, you will get one record at a time.
Create a souce message interface like the followings:
XXXXXXXXX_Mail
rows
record
Target message interface:
XXXXXXXXX
rows
field 1
field 2
field 3
Write a UDF function to remove the TAB space
public removeTABSpace(String record,Container container){
//write your code here
StringTokenizer st = new StringTokenizer(record,"\t",false);
String t="";
while (st.hasMoreElements()) t += st.nextElement();
return t;
Write another UDF to get the field 1 for example:
public String getField1(String input,Container container){
int counter=0;
int beginIndex=0;
int endIndex=0;
int i;
for (i=0;i<input.length();i++){
if (input.charAt(i)==34){
counter=counter+1;
if (counter==1){
beginIndex=i+1;
counter=0;
break;
for (i=0;i<input.length();i++){
if (input.charAt(i)==34){
counter=counter+1;
if (counter==2){
endIndex=i;
counter=0;
break;
input=input.substring(beginIndex,endIndex);
return input;
Get the mapping like the followings:
record - removeTABSpace - getField1 - field 1
If you need to get field 2, you will need to write another UDF similar to the above one to handle it. -
Import tab delimited file into pdfs
I have a tab delimited file with 1000's of rows. I want to complete a form and save it for each row. Rather than using the importData() function by itself and manually going through each record I would like to automate this so it will fill out a form for each row and save a copy of each. I have a little experience in acrobat javascript, but some knowledge of building the form and adding javascript.
You can use the doc.importTextData method to import a row of data into the form and then use the doc.extractPages method to save to a new file, clear the form, and repeat the process for each row.
importTextData: http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_API_AcroJS.88.502.html
extractPages: http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_API_AcroJS.88.465.html
Note that the return codes for importTextData in the documentation are wrong. The positive values should be negative and vice versa.
Maybe you are looking for
-
I have a PC, running XP Pro SP3, which was built for me nigh on 9 years ago. Motherboard: MSI-6712 (KT4V-L) Version 1.0 (North Bridge KT400A Rev 80, South Bridge VT8235 Rev 00) CPU: AMD XP2800+ CPU (Socket A 462, 3000 MHz) Memory: 1.0GB DDR GPU: nVid
-
Reading huge xml files in OSB11gR1(11.1.1.6.0)
Hi, I want to read a huge xml file of size 1GB in OSB(11.1.1.6.0)? I will be creating a (JCA)file adapter in jdeveloper and importing artifacts to OSB. Please let me know the maximum file size that could be handled in OSB? Thanks in advance. Regards,
-
How to include the first row of detail in every xquery transformed xml?
I am dealing with a XML file,where i need to publish to different BS. First node will be a common node node which contains vital info,second node goes to one BS and third goes to another BS. *<header></header>* *<details></details> (they are unbounde
-
Updated itunes - windows quickly shuts it down and says something about "Data Execution Prevention". I followed the instrucxtions to a dead end. I have re downloaded it twice and used the repair files once but get the same result. It worked fine befo
-
Apache Commons Net deployment fails to resolve, JDev classpath question
I wrote a wrapper to apache's most recent version of commons-net package (version 1.4.1) to allow me to execute FTP services from an Oracle 9i2 database. After adding the common-net .jar file to the JDev libraries, and including this library in my pr