Funds center 000000 does not exist in FM area  and fiscal year 15.06.2009

Hi Expert,
When I tried to cancel Invoice via MR8M, I get Error message "Funds center 000000 does not exist in FM area  XXX and fiscal year 15.06.2009"
Please tell me what is wrong here.
Thank you.
Regards,
Henry

Hi,
That's the message from Funds Mangement component. You have to check whether the derived fund centre is the right one and if yes, create it via FMSA transaction.
Regards,
Eli

Similar Messages

  • Fund Center Z001 does not exist in FM area and fiscal year 20.01.2010

    Dear Expert,
    We have activated Funds Managment in quailty Client. but when ever we are trying to create PO below error message is coming:-
    Fund Center Z001 does not exist in FM area and fiscal year 20.01.2010
    Message No-F6580
    Also when ever we are trying to post an FI document the same error message is coming.
    Please advise with T-Code.
    Regards,
    Alok

    Dear Mr Srinu,
    The Z001 problem is solved by creating a fund centre using FMSA. Now while doing the shipment cost below error message is coming:-
    1.Account Assinment to Commitment Item not supported with this GL account. Message no-ME032
    2. No Funds center entered /derived in item 00010(1020/302401/)
    Pl help,
    Regards,
    Alok

  • Commitment item 233000 does not exist in FM area ZK01, fiscal year 2009, an

    Hi,
    i am creating schedule agrement or 1 st april 2009 getting error
    Commitment item 233000 does not exist in FM area ZK01, fiscal year 2009, and variant

    Hi
    Try
    u can do one thing create commitemnt item for the year 2009. public sector management - Create commitmen titem
    then u assign commitment item to GL in Fmderiver Transaction code
    then u post
    Reagards
    Roobal

  • Funds center does not exist in FM area MOF1 and fiscal year

    Hi Consultants,
    I have configured the derivation strategy in FM and other relevant configurations. When trying to post a GL transaction in FI, This error message came up;
    Funds center 0000412000 does not exist in FM area MOF1 and fiscal year 10/13/2010
    What did i not get right.
    Please reply.
    Thanks.
    Ekemini
    Moderator: I believe, the error message speaks for itself. Please, avoid asking basic questions

    Hi,
    That's the message from Funds Mangement component. You have to check whether the derived fund centre is the right one and if yes, create it via FMSA transaction.
    Regards,
    Eli

  • Error message FI 759: Fund does not exist in FM area

    Hill!
    I have to make a distribution in CO-OM (tr KSV5) according to fund
    But if I customize fund as sender, choose fund from the fund catalog  and make a formal chek of cycle I see an error message FI 759: Fund does not exist in FM area. How can I make it go away?

    Hi Irina,
    As per the note 489315, you must choose a layout that contains the exact data for the active objects.
    When planning for non-FM company codes you will have to change the profile/layout that only contain the elements that are active in the company code.
    If you encounter error: KAFF002 while doing the above then please can you see if point 3 of note 555134 will help to by-pass the message.
    Once you add the field Fund and set it to optional you should be able to use planning.
    Note 555134:
    3.  The fields of the Funds Management are defined as 'Required entry
        fields' in the standard layouts, in other words depending on the
        permissibility of the initial value for a field an entry is always
        demanded. To prevent this there are two options:
        a) Copy the desired standard layout into an own (transaction KP65,
           KPG5, OPO1) and via "Extras -> Variables -> Variables definition'
           set the corresponding field to 'Optional". Then, add this layout
           to your planner profile with transaction KP34.
        b) Implement the attached program ZK555134 (correction instruction
           461025). After the entry of planning area and layout all fields
           of the Funds Management are set depending on your selection of
           'Optional' or 'Not optional' (standard system). Like this you can
           also change standard layouts. The check for the fields for which
           'initial' is not a valid value is still carried out.
    If you want to use FUND Accounting, I suggest you to read note 518610 for your reference. This note contains information about FUND Accounting and its effect.
    If you only want to use 'Fund' in Funds Management, you do not have to activate the 'Fund' account assignment element.
    If you activated the FUND account assignment element, which is at CLIENT level activation, the fund would always have to be filled as a required  entry field in CO, FI-AA and HR for all company codes in the client concern.
    Please also refer to notes 625262 and 659086.
    or re-import the standard planning layout from the client 000. In the note 320197 is descriped how to do this.
    I believe this will resolve your issue.
    Best Regards,
    Vanessa.

  • Partner profit center 855013 does not exist for 8/27/2008

    Hi FI Guys,
    Iam basically MM guy,i need some help on this FI issue.Could you please help any body please.
    Based on the user issue below,i found that thevalid profit center was maintaining in Material master and the G/L account was may not be assigned to G/L account.
    please reply step by step.
    issue from user:
    Iu2019m trying to obsolete some material using MB1A, movement type 951 and the disposal account # 13560002, but after I enter all the information and try to save it I get the following message at the bottom of the screen: u201Cpartner profit center 855013 does not exist for 8/27/2008u201D.
    Thanks&Regards,
    Babu
    09930154536

    Dear Babu,
    The Profit Center of the selected material has expired validity. Just extend the validity through KE52 and press the button 'extend the validity period' to current year. I think that your problem will be solved.
    Trust this helps much!
    Cheers,
    Ashok SINGH

  • Profit Center 990612 does not exist in Company Code XYZ

    Dear Friends,
    During the time of posting through t.code F-02 than system is showing the below error :-
    Message no Z1008
    The Profit Center entered does not exist in this company code.
    Enter the correct profiot center which belongs to this company code.
    To search for profit center by comapny code, use matchcode type
    'Z' - Profit Center by company code and name.
    Please advice.
    Thanks & Regards,
    Pankaj

    Hi Pankaj
    This message is a Z message, which means your own creation
    Go to OB28 and check where have you written the Validation step to check this
    Also, check if the PC exists in that comp code or not
    br, Ajay M

  • Country implementation 40 does not exist for category IT and type 2001

    Dear Experts,
    I am getting the following error
    "Country implementation 40 does not exist for category IT and type 2001".
    when I tried to create a leave request. I think the HR Ess configuration is complete.
    Kindly, give your valuable inputs, hence I can try & resolve this issue, as I am stuck with this for quite sometime.
    Your inputs will be really valuable.
    Thanks
    Bala

    After suffering this same problem and not finding any help or information ANYWHERE, I debugged the process and found that the error is caused by a missing entry in view V_BLPTYPECOUNTRY.
    I created a new entry in the view with a blank molga and the error goes away.
    The entry I added was:
    Category = IT
    Data Typ = 2001
    Ctry Grouping = (blank)
    Class = CL_PT_BLP_IT2001
    I hope that this can help anyone having the same problem in the future.

  • Work center category does not exist in CNR1

    Hi,
    While creating a work center through CNR1, I am getting the error 'Work center category 008 does not exist'. I checked  OP40 and the work center category is maintained there. Also the category 0008 has application maintained as Recipes.
    Let me know if I am missing anything here.
    Thanks & Regards,
    Soumya.

    Hi,
    I feel so. If your using the work centre category for project managment, then, application management will be assigned to N, then you can use CNR1, which is the T code to create work centre in Project management.
    In the standard system, Work centre category for project management is 006.
    Pl. try creating the work centre through CRC1 for process manufacturing.
    Madhava

  • HT1386 the summary tab DOES NOT EXIST ON THE NEW  (AND HORRIBLE) ITUNES SOFTWARE!

    the summary tab DOES NOT show up  ON THE NEW  (AND HORRIBLE) ITUNES SOFTWARE! where the heck is it???

    I found it!  After trying everything I could think of, I clicked on the left pane on iPhone and it opened it up.  Yay!!!  Why do things have to be so difficult??
    Thanks anyway!!
    I'm trying to add my Christmas playlist to my iphone but can't find where I check which playlists to synch.  I don't like the new iTunes...
    I have the left hand summary tab but I no longer get access to the icons across the top where I used to choose what synchs and what doesn't - Apps, music, etc.  How do I get that back?
    Help?  Anyone?
    Thanks!

  • KP90 error - KI222 - Cost Center does not exist.

    Hi gurus,
    While executing KP90, I got an error message saying "Cost Center xxxxxxx does not exist on 01/01/2011.
    When I checked, the cost center is created from 05/01/2011 to 12/31/2011.
    Please suggest any solutions....
    1) Can I change the message class for KI222
    2) Can I change the from date of cost center.
    Please suggest as this in an High priority!!!!!!!!!!!!!
    Regards,
    Devang

    Hi Devang,
    As you can see, cost center was created some days after the date that the error message is showing.
    You should create for this cost center the missing interval (01.01.2011 to 04.01.2011) and in case you create with the same data the interval will be combined.
    Best Regards,
    Vanessa.

  • Database startup showing ORA-00942: table or view does not exist in trace

    Hi Friends,
    SunOS 5.10 Generic_137112-06 i86pc i386 i86pc , 64 Bit
    Oracle 10.2.0.1.0
    While I am doing a startup, getting following error.
    SQL> startup;
    ORACLE instance started.
    Total System Global Area 3221225472 bytes
    Fixed Size 2122544 bytes
    Variable Size 410819792 bytes
    Database Buffers 2801795072 bytes
    Redo Buffers 6488064 bytes
    Database mounted.
    ORA-01092: ORACLE instance terminated. Disconnection forcedThe alert log shows the following
    Errors in file /applns/oracle/admin/CTSD1/udump/ctsd1_ora_11486.trc:
    ORA-00942: table or view does not exist
    Error 942 happened during db open, shutting down database
    USER: terminating instance due to error 942
    Instance terminated by USER, pid = 11486
    ORA-1092 signalled during: ALTER DATABASE OPEN...A look at the trace file shows this
    /applns/oracle/admin/CTSD1/udump/ctsd1_ora_11486.trc
    Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
    With the Partitioning, OLAP and Data Mining options
    ORACLE_HOME = /applns/oracle
    System name: SunOS
    Node name: N890
    Release: 5.10
    Version: Generic_137112-06
    Machine: i86pc
    Instance name: CTSD1
    Redo thread mounted by this instance: 1
    Oracle process number: 23
    Unix process pid: 11486, image: oracle@N890 (TNS V1-V3)
    *** SERVICE NAME:() 2011-02-16 19:24:50.188
    *** SESSION ID:(325.3) 2011-02-16 19:24:50.188
    Successfully allocated 3 recovery slaves
    Using 367 overflow buffers per recovery slave
    Thread 1 checkpoint: logseq 45929, block 2, scn 310788795>cache-low rba: logseq 45929, block 3
    >on-disk rba: logseq 45929, block 52, scn 310788832
    >start recovery at logseq 45929, block 3, scn 0
    ----- Redo read statistics for thread 1 -----
    Read rate (ASYNC): 24Kb in 0.31s => 0.08 Mb/sec
    Total physical reads: 4096Kb
    Longest record: 0Kb, moves: 0/61 (0%)
    Longest LWN: 16Kb, moves: 0/3 (0%), moved: 0Mb
    Last redo scn: 0x0000.128642df (310788831)
    ----- Recovery Hash Table Statistics ---------
    Hash table buckets = 32768
    Longest hash chain = 1
    Average hash chain = 4/4 = 1.0
    Max compares per lookup = 1
    Avg compares per lookup = 117/121 = 1.0
    *** 2011-02-16 19:24:50.515
    KCRA: start recovery claims for 4 data blocks
    *** 2011-02-16 19:24:50.515
    KCRA: blocks processed = 4/4, claimed = 4, eliminated = 0
    *** 2011-02-16 19:24:50.516
    Recovery of Online Redo Log: Thread 1 Group 1 Seq 45929 Reading mem 0
    ----- Recovery Hash Table Statistics ---------
    Hash table buckets = 32768
    Longest hash chain = 1
    Average hash chain = 4/4 = 1.0
    Max compares per lookup = 1
    Avg compares per lookup = 121/121 = 1.0
    ORA-00942: table or view does not existI have searched MOS and Google, but didn;'t get any relevant results.
    Also flushed my shared_pool as mentioned in (http://www.tanelpoder.com/files/oracle_rowcache.pdf) after mount and started , still no luck
    Any help is appreciated
    Thanks
    SSN

    Hi,
    Thanks.
    Tried log mining, but still couldn't find the culprit. I think now, I have to drop and create this db.Still wondering what might have happened.
    select group#,status from v$log;
        GROUP# STATUS
             1 INACTIVE
             3 INACTIVE
             2 CURRENT
    SQL> select group#,MEMBER from v$logfile where group#=2;
        GROUP#
    MEMBER
             2
    /applns/oracle/oradata/CTSD1/redo02.log
    SQL> EXECUTE sys.DBMS_LOGMNR.ADD_LOGFILE( LOGFILENAME => '/applns/oracle/oradata/CTSD1/redo02.log',OPTIONS => sys.DBMS_LOGMNR.NEW);
    PL/SQL procedure successfully completed.
    SQL> EXECUTE sys.DBMS_LOGMNR.START_LOGMNR;
    PL/SQL procedure successfully completed.
    SQL> SELECT COUNT (*) FROM   v$logmnr_contents WHERE  operation = 'DDL';
      COUNT(*)
             0
    SQL> EXECUTE sys.DBMS_LOGMNR.END_LOGMNR();
    PL/SQL procedure successfully completed.
    SQL> select group#,MEMBER from v$logfile where group#=1;
        GROUP#
    MEMBER
             1
    /applns/oracle/oradata/CTSD1/redo01.log
             1
    /applns/oracle/oradata/CTSD1/redolog001.log
    SQL> EXECUTE sys.DBMS_LOGMNR.ADD_LOGFILE( LOGFILENAME => '/applns/oracle/oradata/CTSD1/redo01.log',OPTIONS => sys.DBMS_LOGMNR.NEW);
    PL/SQL procedure successfully completed.
    SQL> EXECUTE sys.DBMS_LOGMNR.START_LOGMNR;
    PL/SQL procedure successfully completed.
    SQL> SELECT COUNT (*) FROM   v$logmnr_contents WHERE  operation = 'DDL';
      COUNT(*)
             0
    SQL> EXECUTE sys.DBMS_LOGMNR.END_LOGMNR();
    PL/SQL procedure successfully completed.
    SQL> EXECUTE sys.DBMS_LOGMNR.ADD_LOGFILE( LOGFILENAME => '/applns/oracle/oradata/CTSD1/redolog001.log',OPTIONS => sys.DBMS_LOGMNR.NEW);
    PL/SQL procedure successfully completed.
    SQL> EXECUTE sys.DBMS_LOGMNR.START_LOGMNR;
    PL/SQL procedure successfully completed.
    SQL> SELECT COUNT (*) FROM   v$logmnr_contents WHERE  operation = 'DDL';
      COUNT(*)
             0
    SQL> EXECUTE sys.DBMS_LOGMNR.END_LOGMNR();
    PL/SQL procedure successfully completed.
    SQL> select group#,MEMBER from v$logfile where group#=3
        GROUP#
    MEMBER
             3
    /applns/oracle/oradata/CTSD1/redo03.log
    SQL> EXECUTE sys.DBMS_LOGMNR.ADD_LOGFILE( LOGFILENAME => '/applns/oracle/oradata/CTSD1/redo03.log',OPTIONS => sys.DBMS_LOGMNR.NEW);
    PL/SQL procedure successfully completed.
    SQL>  EXECUTE sys.DBMS_LOGMNR.START_LOGMNR;
    PL/SQL procedure successfully completed.
    SQL> SELECT COUNT (*) FROM   v$logmnr_contents WHERE  operation = 'DDL';
      COUNT(*)
             0
    SQL> EXECUTE sys.DBMS_LOGMNR.END_LOGMNR();
    PL/SQL procedure successfully completed.SSN

  • Error in VL02N: Business Area 701 does not exist

    Hi experts,
    There's an error that occurs while trying to post a delivery in VL02N, a display log is opened with the message "Business Area X does not exist", the Business Area "1701" is already created, nevertheless, when I try to post the delivery I cheked the Business Area in the Financial Processing tab and it appears as "701" instead of "1701".
    I hope any of you can help me.
    Thanks in advance
    Eloy Venegas

    hi,
    For the Sales Area, check the rule for determining the Bzness Area(S&D>Basic Functions>Account Assgmnt/Costing>Business Area Account Assignment>...) and make sure ur bzness area '1701' is assigned to the sales area/or any combination that you've defined in the rule.
    Let us know, if this helps?
    Reward, if helpful.
    Rgds,
    Raghu.

  • Input File repository server Error: The requested directory does not exist.

    Hi,
    Getting following error "The requested directory does not exist." for Input and Out put file repository server.
    The specfied directory exists and the user has local administrative privelges with full control of the IFRS and OFRS location.
    The location was earlier working and after trying to implement Windows AD the things stopped. Have tried reverting the things but the following issue still persists.
    Thanks,
    Manpreet

    @Siva,
    I am not using the defacult FRS, I have specfied a specfic location on which the user has full control.
    this was working prior to the Windows AD setup tried by me.

  • Cannot insert PS_TXN ORA-00942 table or view does not exist

    We are using jdev 11.1.1.4.0
    We have two users in the database and various application modules which connect to these users using datasources
    We have tested the application with applicatin module pooling enabled off to test for passivation and activation errors and the application works fine.
    Also on our internal test enviorment which has more then 10 concurrent users the application works fine
    But at UAT it has started suddenly to give errors Cannot insert in PS_TXN ORA-00942 table or view does not exist
    When I see the data in PS_TXN tables in various users I can see that passivation has taken place for the same day when there sporadic errors have been reported all having the cause as ORA-00942 table or view does not exist.
    But one strange thing that I have observed is that the COLLID column has sequence numbers interchanged for the users randomly, database user 1 has sequence number from database user 2 seq and vice a versa in COLLID
    As far as this problem goes the passivation should have failed with ORA-00001 primary key voilated but that is not the case
    May be the keys have still not got to a number where they collide.
    But I am totally taken aback on such a behaviour and I am not sure how to correct it.
    So we have two porblems here
    1) why did this error come in first place PS_TXN ORA-00942 table or view does not exist
    2) Why are the sequence numbers interchanged for the databse users ?
    Edited by: user3067156 on Jun 19, 2012 3:12 AM

    I got reply to my second question
    It looks like a bug in the framework and the suggestions are to use only one ps_txn and ps_txn_seq by modifying the internal connection
    But the first problem is not yet known why did it appear suddenly
    Edited by: user3067156 on Jun 19, 2012 3:12 AM

Maybe you are looking for