Funds Management BCS error: Combination ENTR / A1 is not allowed in budget

I just applied Budget Control System in Fund Management module. I use FMBBC to enter budget value. I select BCS value type B1, Process ENTR, Type A1 and enter Fund Center/Commitment Item value. Whenever i tried to save, it always show error Combination ENTR / A1 is not allowed for status ADEC, Budget. Same error with any other combination.
I already assigned budget type and process combination in FM area (Budget Control System (BCS) > Budgeting > Basic Settings > Definition of Budget Data > Budget Types > Assign Budget Types to Processes (Mass Maintenance)
What setting did I missed? Thanks

Hi,
Chech the 'Status' configuration in BCS Budgeting - Control Budgeting Flow - Edit Status.
Regards,
Eli

Similar Messages

Funds Management -BCS Planning

In Funds Management-BCS planning.
I am getting a short dump each time i try to plan using intergrated planning with Excel. I have managed to assign the following to to the planning profile
(a) table FMBDT (b) assign planning task -with intergrated execl. However when i try to show the default parameters, i am getting a dump.

Hi,
Please, specify what kind of dump you are getting, including the dump message.
Regards,
Eli

An error occurred in the requested FTP operation. Detailed error description: The password was not allowed

Hi All,
We are using FTP Connection in our SSIS Package which will take a flat file from the sharepath to another FTP Path.
We used SqlServerTableConfiguration to store all the connection. Initally we have stored only the below connection int he
SqlConfiguration table. ie only the server name
Note : We are not using XML Configuration.
ConfigurationFilter
   ConfiguredValue
PackagePath
Filter_ftp
pqrft- pcmnt.uk.acenentcapmc.com:21
\Package.Connections[FTP Connection Manager].Properties[ConnectionString]
while running the job we have found that we have not stored the UserName and password so we have added the below entries in the Sql Configuration table
In the Configurationtable we have the following entires
ConfigurationFilter
ConfiguredValue
PackagePath
Filter_ftp
pgrotmlceni
\Package.Connections[FTP Connection Manager].Properties[ServerUserName]
Filter_ftp
21
\Package.Connections[FTP Connection Manager].Properties[ServerPort]
Filter_ftp
abcdXYZ
\Package.Connections[FTP Connection Manager].Properties[ServerPassword]
Filter_ftp
pqrft-pcmnt.uk.acenentcapmc.com
\Package.Connections[FTP Connection Manager].Properties[ServerName]
Filter_ftp
pqrft-pcmnt.uk.acenentcapmc.com:21
\Package.Connections[FTP Connection Manager].Properties[ConnectionString]
In the package properties we have selected "DontSaveSentivity" Option.
We are getting the below error message when we run the package through jobs after deployment and also we are getting the same error message even when we run the package from Bids
Message
Executed as user:abc_xyz-proxy. Microsoft (R) SQL Server Execute Package Utility Version 10.50.4000.0 for 32-bit Copyright (C) Microsoft Corporation 2010. All rights reserved.    Started: 06:53:16 Error: 2013-12-16 06:53:20.69
Code: 0xC001602A     Source: SSIS_ABC_GT_GRoots_Export Connection manager "FTP Connection Manager"     Description: An error occurred in the requested FTP operation. Detailed error description: The password
was not allowed . End Error Error: 2013-12-16 06:53:20.71     Code: 0xC002918F     Source: FTP Task FTP Task     Description: Unable to connect to FTP server using "FTP Connection
Manager". End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 06:53:16 Finished: 06:53:20 Elapsed: 3.822 seconds. The package execution failed. The step failed.
ilikemicrosoft

Hi Surendiran,
The issue should occur because the syntax of the ConnetionString property of the FTP Connection Manager is incorrect. In fact, the ConnectionString property is unnecessary. I suggest that you only use the four properties instead: ServerName, ServerPort,
ServerUserName, and ServerPassword.
Reference:
http://stackoverflow.com/questions/3888170/ftp-connection-string-using-expression-in-ssis
Regards,
Mike Yin
If you have any feedback on our support, please click here
Mike Yin
TechNet Community Support

After Feb 2015 CU viewing list items results in error : requested registry access is not allowed

Hello All,
We recently (Monday) updated our farm to the feb 2015 CU. Since then we have been getting calls in from users that cannot access list items. They receive a correlation error. Looking at the logs the correlation error points to a critical
error: "Requested registry access is not allowed"
Doing some googling, others have seen this error but it is usually associated with managed accounts.
Has anyone else encountered this issue/error? Have you found a solution?
Thanks for your help
environment: SharePoint 2013 enterprise : 6 farm servers : OWA : project server : SQL 2012 always on backend

This would be the service account running the Web Application failing to access the registry key(s). What you should do is set up
Process Monitor to look at Registry keys, and look for ACCESS DENIED.
One thing you could just try out would be to run:
Initialize-SPResourceSecurity
Also, do you mean the March 2015 CU?
Trevor Seward
Follow or contact me at...
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

[Fatal Error] :1:1: Content is not allowed in prolog. ..XML READ ERROR

Hi I am developing an application where it will read xml elements from the http site (http://www.w3schools.com/Xml/note.xml) and display in my program using DOM. while executing its giving CONTENT IS NOT ALLOWED IN PROGRAM below error. but when i am use coded xml in program itself as comment as shown in program its giving correct value. I need to read from http not from coded xml in the program. its immediate please help me out.
[Fatal Error] :1:1: Content is not allowed in prolog.
org.xml.sax.SAXParseException: Content is not allowed in prolog.
at com.sun.org.apache.xerces.internal.parsers.DOMParser.parse(Unknown Source)
at com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderImpl.parse(Unknown Source)
at SimpleXML1.main(SimpleXML1.java:34)
import javax.xml.parsers.*;
import org.xml.sax.InputSource;
import org.w3c.dom.*;
import java.io.*;
public class SimpleXML1 {
public static void main(String arg[]) {
String xmlRecords = "http://www.w3schools.com/Xml/note.xml";
/* String xmlRecords =
" <note>" +
" <to>John</to>" +
" <from>Manager</from>" +
" <heading>XML Program</heading>" +
" <body>Simple XML</body>" +
"</note>";*/
try {
DocumentBuilderFactory dbf =
DocumentBuilderFactory.newInstance();
DocumentBuilder db = dbf.newDocumentBuilder();
InputSource is = new InputSource();
is.setCharacterStream(new StringReader(xmlRecords));
Document doc = db.parse(is);
NodeList nodes = doc.getElementsByTagName("note");
for (int i = 0; i < nodes.getLength(); i++) {
Element element = (Element) nodes.item(i);
NodeList from = element.getElementsByTagName("from");
Element line = (Element) from.item(0);
Node child1 = line.getFirstChild();
CharacterData cd = (CharacterData) child1;
System.out.println(cd.getData());
catch (Exception e) {
e.printStackTrace();
}

chrisacess wrote:String xmlRecords = "http://www.w3schools.com/Xml/note.xml";
/* snip */
is.setCharacterStream(new StringReader(xmlRecords));
Is that really how you're trying to read the online XML document? Because I don't see anything that makes a connection to the site. All you're doing is trying to parse the string "http://www.w3schools.com/Xml/note.xml" is if it were XML.
ps, That "Content not allowed in prolog" error message is worse than useless IMO. They might as well say "It didn't work" for all the good does.

Why do I get an error msg that reads "operation not allowed" whenever I try to Remove Attributes from my timeline?

On any given project, whenever I select everything in my timeline and try to remove all the attributes, I get an error message that reads "operation not allowed."
If I select a smaller chuck of files on my timeline and hit remove attributes, it works, but this isn't the case if I select everything in my timeline.
How do I fix this? Thanks!

Have you tried trashing your Final Cut Pro preferences? It is usually the first step when FCP begins to act in unexpected ways.
Download Preference Manager (free) from Digital Rebellion
http://www.digitalrebellion.com/prefman/
and use it to trash your preferences - they will be set to default the next time you open FCP.
If that does not remedy the problem, do you have any still images in your timeline that are not RGB, or are greater than 4000 pixels in the widest dimension?
Is your source material in an FCP7 edit friendly codec?
MtD

I have recently bought a macbook and am using outlook 2011 as email. i am getting an error message 4.7.0 not allowed when sending emails how do I fix?

i have a macbook and am using outlook 2011 as email. receiving okay. sending okay sometimes. am now getting error message 4.7.0 not allowed when sending. what is the cause? how do I fix please?

I have discovered that the emails have in fact been sent but much later, maybe it's a network problem with the people i am sending it to. so i checked my sent items and they are there, but at the time the email doesn't go straight into the sent box or drafts so i'm assuming it's disappeared and type it again. i'll keep going with it, until someone can give me a possible solution or explanation as to what is happening.

When i try to copy books to my nook, with every single title i continue to get an error message that says 'copy not allowed - no permission to copy the book'. any suggestions on how to fix this?

when i try to copy books to my nook, with every single title i continue to get an error message that says 'copy not allowed - no permission to copy the book'. any suggestions on how to fix this?

I had recently updated from Windows 7 to Windows 8.1 and thus had to re download Adobe Digital Editions. I downloaded Version 4.0 but the problem seemed to be with the authorization between the e-reader and the computer. While in ADE click the help button and click erase authorization then re do your user id and password. It worked for me.

Address list error -- 5.7.1 Relaying not allowed

Hi,
We have setup the Java Messaging Server to send/recieve mails from a gateway. The inbound mail flow works perfectly but, the outbound mail flow has issues.
The outbound mails are not hitting the gateway. When checked the log for outbound mail, it displays the address list error - 5.7.1 Relaying not allowed for any domain i.e gmail.com, etc
version:
Sun Java(tm) System Messaging Server 6.3-5.02 (built Oct 12 2007; 32bit)
libimta.so 6.3-5.02 (built 17:15:31, Oct 12 2007; 32bit)
SunOS P1192FLPLN 5.9 Generic_118558-02 sun4u sparc SUNW,Sun-Fire
here is the log for reference...
=========================================================================
root@P1192FLPLN # /opt/SUNWmsgsr/sbin/imsimta test -rewrite -debug -source_channel=tcp_local [email protected] [email protected]
Initializing mm_.
Initializing mm_ submission.
Checking identifiers.
*** Debug output from initializing MM for submission:
17:09:37.43: Debug output enabled, system P1192FLPLN.extmail.xyz.com, process 3fbf.1, message enqueue routines version V6.3 compiled Oct 12 2007 17:15:38
17:09:37.43: mmc_winit('tcp_local','[email protected]','') called.
17:09:37.43: Address reversal invoked on [email protected], force reverse URL 1, capture 1
17:09:37.43: Rewriting: Mbox = "abhishek.sen", host = "extmail.xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.43: Rewrite: "$*", position 0, hash table -
17:09:37.43:   Found: "$A$E$F$U%[email protected]"
17:09:37.43:   Rewrite failed, not forward.
17:09:37.43: Rewrite: "$*", position 1, hash table -
17:09:37.43:   Failed.
17:09:37.43: Rewrite: "$*", position 0, rewrite database -
17:09:37.43:   Failed
17:09:37.43: Rewriting: Mbox = "abhishek.sen", host = "extmail", domain = "extmail.xyz.com", literal = "", tag = ""
17:09:37.43: Rewrite: "extmail.xyz.com", position 0, hash table -
17:09:37.43:   Found: "$U%[email protected]"
17:09:37.43:   New mailbox: "abhishek.sen".
17:09:37.43:   New host: "extmail.xyz.com".
17:09:37.43:   New route: "P1192FLPLN.extmail.xyz.com".
17:09:37.43:   New channel system: "P1192FLPLN.extmail.xyz.com".
17:09:37.43: Looking up host "P1192FLPLN.extmail.xyz.com".
17:09:37.43:   - found on channel l
17:09:37.43: Routelocal flag set; scanning for % and !
17:09:37.43:   Checking reverse URL cache for: [email protected]
17:09:37.43:   Applying reverse URL pattern ldap:///$V?$N?sub?$R to: [email protected]
17:09:37.48:   Resulting URL: ldap:///o%3Dextmail.xyz.com%2Co%3Dext?preferredlanguage,mailmsgmaxblocks,mail,mailalternateaddress,mailequivalentaddress?sub?(|([email protected])([email protected])([email protected]))
17:09:37.49: mmc_open_url called to open ldap:///o%3Dextmail.xyz.com%2Co%3Dext?preferredlanguage,mailmsgmaxblocks,mail,mailalternateaddress,mailequivalentaddress?sub?(|([email protected])([email protected])([email protected])), flags = 384
17:09:37.49:   URL with quotes stripped: ldap:///o%3Dextmail.xyz.com%2Co%3Dext?preferredlanguage,mailmsgmaxblocks,mail,mailalternateaddress,mailequivalentaddress?sub?(|([email protected])([email protected])([email protected]))
17:09:37.49:   LDAP URL identified
17:09:37.49: URL context #1 will be used
17:09:37.49:   Performing URL search on: ldap:///o%3Dextmail.xyz.com%2Co%3Dext?preferredlanguage,mailmsgmaxblocks,mail,mailalternateaddress,mailequivalentaddress?sub?(|([email protected])([email protected])([email protected]))
17:09:37.53: mmc_read_url result: [uid=asen,ou=People,o=extmail.xyz.com,o=ext]
17:09:37.53:   URL resolution returned: [uid=asen,ou=People,o=extmail.xyz.com,o=ext]
17:09:37.53: mmc_read_url result: [preferredlanguage] en
17:09:37.53:   URL resolution returned: [preferredlanguage] en
17:09:37.53:       Attribute index: 0
17:09:37.53:       LDAP URL produced preferred language en
17:09:37.53: mmc_read_url result: [mailmsgmaxblocks] 700
17:09:37.53:   URL resolution returned: [mailmsgmaxblocks] 700
17:09:37.53:       Attribute index: 0
17:09:37.53:       LDAP URL produced blocklimit 700
17:09:37.53: mmc_read_url result: [mail] [email protected]
17:09:37.53:   URL resolution returned: [mail] [email protected]
17:09:37.54:       Attribute index: 0
17:09:37.54:       LDAP URL produced address [email protected]
17:09:37.54:   No more results to return
17:09:37.54:     Override postmaster: [email protected]
17:09:37.54:     Preferred language en
17:09:37.54:     Content return block limit now 700
17:09:37.54:   Mapped return address: [email protected]
17:09:37.54:   from_access mapping check: ||MAIL|tcp_local|[email protected]|
17:09:37.54: Queue area size 73232902, temp area size 2067314
17:09:37.54:   18308225 blocks of effective free queue space available; setting disk limit accordingly.
17:09:37.54:   1033657 blocks of free temporary space available; setting disk limit accordingly.
17:09:37.54:       - passed.
17:09:37.54: Rewriting: Mbox = "abhishek.sen", host = "extmail.xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.54: Rewrite: "$*", position 0, hash table -
17:09:37.54:   Found: "$A$E$F$U%[email protected]"
17:09:37.54:   Rewrite failed, not forward.
17:09:37.54: Rewrite: "$*", position 1, hash table -
17:09:37.54:   Failed.
17:09:37.54: Rewrite: "$*", position 0, rewrite database -
17:09:37.54:   Failed
17:09:37.54: Rewriting: Mbox = "abhishek.sen", host = "extmail", domain = "extmail.xyz.com", literal = "", tag = ""
17:09:37.54: Rewrite: "extmail.xyz.com", position 0, hash table -
17:09:37.54:   Found: "$U%[email protected]"
17:09:37.54:   New mailbox: "abhishek.sen".
17:09:37.54:   New host: "extmail.xyz.com".
17:09:37.54:   New route: "P1192FLPLN.extmail.xyz.com".
17:09:37.56:   New channel system: "P1192FLPLN.extmail.xyz.com".
17:09:37.56: Looking up host "P1192FLPLN.extmail.xyz.com".
17:09:37.56:   - found on channel l
17:09:37.56: Routelocal flag set; scanning for % and !
*** Debug output from rewriting a forward header address:
17:09:37.56: Rewriting: Mbox = "bhanu.prasad", host = "xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.56: Rewrite: "$*", position 0, hash table -
17:09:37.56:   Found: "$A$E$F$U%[email protected]"
17:09:37.57:   Rewrite failed, not envelope.
17:09:37.57: Rewrite: "$*", position 1, hash table -
17:09:37.57:   Failed.
17:09:37.57: Rewrite: "$*", position 0, rewrite database -
17:09:37.57:   Failed
17:09:37.57: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = "xyz.com", literal = "", tag = ""
17:09:37.57: Rewrite: "xyz.com", position 0, hash table -
17:09:37.57:   Failed.
17:09:37.57: Rewrite: "xyz.com", position 0, rewrite database -
17:09:37.59:   Failed
17:09:37.59: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = ".com", literal = "", tag = ""
17:09:37.59: Rewrite: "*.com", position 0, hash table -
17:09:37.59:   Failed
17:09:37.59: Rewrite: ".com", position 0, hash table -
17:09:37.59:   Found: "$U%$H$D@TCP-DAEMON"
17:09:37.59:   New mailbox: "bhanu.prasad".
17:09:37.59:   New host: "xyz.com".
17:09:37.59:   New route: "TCP-DAEMON".
17:09:37.59:   New channel system: "TCP-DAEMON".
17:09:37.59: Looking up host "TCP-DAEMON".
17:09:37.60:   - found on channel tcp_local
17:09:37.60: Rewriting: Mbox = "bhanu.prasad", host = "xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.60: Rewrite: "$*", position 0, hash table -
17:09:37.60:   Found: "$A$E$F$U%[email protected]"
17:09:37.60:   Rewrite failed, not envelope.
17:09:37.60: Rewrite: "$*", position 1, hash table -
17:09:37.60:   Failed.
17:09:37.60: Rewrite: "$*", position 0, rewrite database -
17:09:37.60:   Failed
17:09:37.61: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = "xyz.com", literal = "", tag = ""
17:09:37.61: Rewrite: "xyz.com", position 0, hash table -
17:09:37.61:   Failed.
17:09:37.61: Rewrite: "xyz.com", position 0, rewrite database -
17:09:37.61:   Failed
17:09:37.61: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = ".com", literal = "", tag = ""
17:09:37.61: Rewrite: "*.com", position 0, hash table -
17:09:37.61:   Failed
17:09:37.61: Rewrite: ".com", position 0, hash table -
17:09:37.63:   Found: "$U%$H$D@TCP-DAEMON"
17:09:37.63:   New mailbox: "bhanu.prasad".
17:09:37.63:   New host: "xyz.com".
17:09:37.63:   New route: "TCP-DAEMON".
17:09:37.63:   New channel system: "TCP-DAEMON".
17:09:37.63: Looking up host "TCP-DAEMON".
17:09:37.63:   - found on channel tcp_local
17:09:37.63:   Rewrite rules result: [email protected]
17:09:37.63:   Checking reverse URL cache for: [email protected]
17:09:37.63:   Applying reverse URL pattern ldap:///$V?$N?sub?$R to: [email protected]
17:09:37.65:   URL generation failed, status = 0
*** Debug output from rewriting a forward envelope address:
17:09:37.65: Rewriting: Mbox = "bhanu.prasad", host = "xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.65: Rewrite: "$*", position 0, hash table -
17:09:37.65:   Found: "$A$E$F$U%[email protected]"
17:09:37.65:   Match, pattern = "xyz.com", current = "(*domaincheck*)"
17:09:37.65:     old state = not checked.
17:09:37.65:     Domain check on xyz.com.
17:09:37.66:     Could not add domain result 0 to cache for xyz.com.
17:09:37.66:     new state = fail pending.
17:09:37.66:   Rewrite failed due to prechannel mismatch.
17:09:37.66: Rewrite: "$*", position 1, hash table -
17:09:37.66:   Failed.
17:09:37.66: Rewrite: "$*", position 0, rewrite database -
17:09:37.66:   Failed
17:09:37.66: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = "xyz.com", literal = "", tag = ""
17:09:37.66: Rewrite: "xyz.com", position 0, hash table -
17:09:37.66:   Failed.
17:09:37.67: Rewrite: "xyz.com", position 0, rewrite database -
17:09:37.67:   Failed
17:09:37.67: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = ".com", literal = "", tag = ""
17:09:37.67: Rewrite: "*.com", position 0, hash table -
17:09:37.67:   Failed
17:09:37.67: Rewrite: ".com", position 0, hash table -
17:09:37.67:   Found: "$U%$H$D@TCP-DAEMON"
17:09:37.67:   New mailbox: "bhanu.prasad".
17:09:37.67:   New host: "xyz.com".
17:09:37.67:   New route: "TCP-DAEMON".
17:09:37.69:   New channel system: "TCP-DAEMON".
17:09:37.69: Looking up host "TCP-DAEMON".
17:09:37.69:   - found on channel tcp_local
address channel        = tcp_local
forward channel        = tcp_local
channel description    =
channel caption        =
channel user filter    =
dest channel filter    =
source channel filter =
channel flags #0       = BIDIRECTIONAL SINGLE_SYSTEM IMMNONURGENT NOSERVICEALL channel flags #1       = SMTP_CRLF MX IDENTNONENUMERIC DEFAULT
channel flags #2       = COPYSENDPOST COPYWARNPOST POSTHEADONLY HEADERINC NOEXPROUTE
channel flags #3       = LOGGING NORESTRICTED RETAINSECURITYMULTIPARTS
channel flags #4       = EIGHTNEGOTIATE HEADERKEEPORDER NOHEADERREAD RULES
channel flags #5       = TRUNCATESMTPLONGLINES
channel flags #6       = LOCALUSER REPORTNOTARY
channel flags #7       = SWITCHCHANNEL REMOTEHOST DATEFOUR DAYOFWEEK
channel flags #8       = NODEFRAGMENT EXQUOTA REVERSE NOCONVERT_OCTET_STREAM
channel flags #9       = NOTHURMAN INTERPRETENCODING USEINTERMEDIATE RECEIVEDFROM VALIDATELOCALNONE NOTURN
defaulthost            = extmail.xyz.com extmail.xyz.com
linelength             = 998
addrsperfile           = 99
channel env addr type = SOURCEROUTE
channel hdr addr type = SOURCEROUTE
channel official host = tcp-daemon
channel queue 0 name   = SMTP_POOL
channel queue 1 name   = SMTP_POOL
channel queue 2 name   = SMTP_POOL
channel queue 3 name   = SMTP_POOL
channel after params    =
channel daemon name    = 10.8.51.126
channel user name      =
urgentnotices          = 1 2 4 7
normalnotices          = 1 2 4 7
nonurgentnotices       = 1 2 4 7
channel rightslist ids =
local behavior flags   = %x0
expandchannel          =
notificationchannel    =
dispositionchannel     =
tlsswitchchannel       =
backward channel       = tcp_local
unique identifier      = [email protected]
header forward address = [email protected] (route (TCP-DAEMON,TCP-DAEMON)) (host xyz.com)
header reverse address = [email protected]
envelope forw address = [email protected] (route (TCP-DAEMON,TCP-DAEMON)) (host xyz.com)
envelope rev address   = [email protected] (route (TCP-DAEMON,TCP-DAEMON)) (host xyz.com)
name                   =
mbox                   = bhanu.prasad
Extracted address action list:
    [email protected]
Extracted 733 address action list:
    [email protected]
Address list expansion:
*** Debug output from alias expansion:
17:09:37.76: Inner expand, level = 0, mailbox = [email protected]
17:09:37.76: Rewriting: Mbox = "bhanu.prasad", host = "xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.76: Rewrite: "$*", position 0, hash table -
17:09:37.76:   Found: "$A$E$F$U%[email protected]"
17:09:37.76:   Match, pattern = "xyz.com", current = "(*domaincheck*)"
17:09:37.76:     old state = not checked.
17:09:37.76:     Domain check on xyz.com.
17:09:37.77:     Could not add domain result 0 to cache for xyz.com.
17:09:37.77:     new state = fail pending.
17:09:37.77:   Rewrite failed due to prechannel mismatch.
17:09:37.77: Rewrite: "$*", position 1, hash table -
17:09:37.77:   Failed.
17:09:37.77: Rewrite: "$*", position 0, rewrite database -
17:09:37.77:   Failed
17:09:37.77: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = "xyz.com", literal = "", tag = ""
17:09:37.77: Rewrite: "xyz.com", position 0, hash table -
17:09:37.77:   Failed.
17:09:37.79: Rewrite: "xyz.com", position 0, rewrite database -
17:09:37.79:   Failed
17:09:37.79: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = ".com", literal = "", tag = ""
17:09:37.79: Rewrite: "*.com", position 0, hash table -
17:09:37.79:   Failed
17:09:37.79: Rewrite: ".com", position 0, hash table -
17:09:37.79:   Found: "$U%$H$D@TCP-DAEMON"
17:09:37.79:   New mailbox: "bhanu.prasad".
17:09:37.79:   New host: "xyz.com".
17:09:37.79:   New route: "TCP-DAEMON".
17:09:37.80:   New channel system: "TCP-DAEMON".
17:09:37.80: Looking up host "TCP-DAEMON".
17:09:37.80:   - found on channel tcp_local
-13 expansion total.
*** Debug output from submitting an envelope address:
17:09:37.80: mmc_wadr(0x0017ae68,'[email protected]','[email protected]') called.
17:09:37.80: Copy estimate before address addition is 1
17:09:37.80:     Parsing address [email protected]
17:09:37.80: Rewriting: Mbox = "bhanu.prasad", host = "xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.80: Rewrite: "$*", position 0, hash table -
17:09:37.81:   Found: "$A$E$F$U%[email protected]"
17:09:37.81:   Match, pattern = "xyz.com", current = "(*domaincheck*)"
17:09:37.81:     old state = not checked.
17:09:37.81:     Domain check on xyz.com.
17:09:37.81:     Could not add domain result 0 to cache for xyz.com.
17:09:37.81:     new state = fail pending.
17:09:37.81:   Rewrite failed due to prechannel mismatch.
17:09:37.81: Rewrite: "$*", position 1, hash table -
17:09:37.83:   Failed.
17:09:37.83: Rewrite: "$*", position 0, rewrite database -
17:09:37.83:   Failed
17:09:37.83: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = "
xyz.com", literal = "", tag = ""
17:09:37.83: Rewrite: "xyz.com", position 0, hash table -
17:09:37.83:   Failed.
17:09:37.83: Rewrite: "xyz.com", position 0, rewrite database -
17:09:37.83:   Failed
17:09:37.83: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = "
.com", literal = "", tag = ""
17:09:37.83: Rewrite: "*.com", position 0, hash table -
17:09:37.84:   Failed
17:09:37.84: Rewrite: ".com", position 0, hash table -
17:09:37.84:   Found: "$U%$H$D@TCP-DAEMON"
17:09:37.84:   New mailbox: "bhanu.prasad".
17:09:37.84:   New host: "xyz.com".
17:09:37.84:   New route: "TCP-DAEMON".
17:09:37.84:   New channel system: "TCP-DAEMON".
17:09:37.84: Looking up host "TCP-DAEMON".
17:09:37.84:   - found on channel tcp_local
17:09:37.84:       - adding address [email protected] to headers.
17:09:37.86:       - orig_send_access mapping check: tcp_local|abhishek.sen@extm
ail.xyz.com|tcp_local|[email protected]
17:09:38.16:         - failed.
17:09:38.16: Good address count 0 defer count 0
17:09:38.16: Copy estimate after address addition is 1
17:09:38.16: mmc_waend(0x0017ae68) called.
17:09:38.16:   Copy estimate is 1
17:09:38.16:   Queue area size 73232902, temp area size 2067288
17:09:38.16:   36616451 blocks of effective free queue space available; setting
disk limit accordingly.
17:09:38.16:   1033644 blocks of free temporary space available; setting disk li
mit accordingly.
Expanded address:
[email protected]
Submitted address list:
Address list error -- 5.7.1 Relaying not allowed: [email protected]
Submitted notifications list:
=========================================================================Do we have to make any changes on other config files except the imta.cnf and mappings file for inbound and outbound..
thanks for any help
Edited by: prasad0_0 on Jul 8, 2008 4:58 AM

i have already setup the messaging server 6 months back.. followed the same procedure to route mails to a gateway..
made changes to the imta.cnf for outbound mail flow to the tcp_local and mappings file to accept inbound mail flow from the gateway. Its working perfectly on the older setup, but this now, have issues with new setup.
here is the imta.cnf file..
! IMTA configuration file
! part I : rewrite rules
! Domain Rewrite Rules.
! Uncomment this line to use domain rewrite rules
! from the configuration file instead of the domain database.
! Please refer to the iMS documentation for details.
!<IMTA_TABLE:domains.rules
! Rules to select local users
$* $A$E$F$U%[email protected]
P1192FLPLN.extmail.xyz.com $U%[email protected]
extmail.xyz.com $U%[email protected]
! ims-ms
.ims-ms-daemon $U%$H.ims-ms-daemon@ims-ms-daemon
! lmtp
!.lmtp $U%$H@lmtpcs-daemon
! lmtpn
!.lmtpn $U%$H@lmtpcn-daemon
! native
.native-daemon $U%$H.native-daemon@native-daemon
! pipe
.pipe-daemon $U%$H.pipe-daemon@pipe-daemon
! tcp_local
! Rules for top level internet domains
<IMTA_TABLE:internet.rules
! tcp_intranet
! Do mapping lookup for internal IP addresses
[] $E$R${INTERNAL_IP,$L}$U%[$L]@tcp_intranet-daemon
.extmail.xyz.com $U%$H.extmail.xyz.com@tcp_intranet-daemon
* $U%$&0.extmail.xyz.com
! reprocess
reprocess $U%reprocess.P1192FLPLN.extmail.xyz.com@reprocess-daemon
reprocess.P1192FLPLN.extmail.xyz.com $U%reprocess.P1192FLPLN.extmail.xyz.com@reprocess-daemon
! process
process $U%process.P1192FLPLN.extmail.xyz.com@process-daemon
process.P1192FLPLN.extmail.xyz.com $U%process.P1192FLPLN.extmail.xyz.com@process-daemon
! defragment
defragment $U%defragment.P1192FLPLN.extmail.xyz.com@defragment-daemon
defragment.P1192FLPLN.extmail.xyz.com $U%defragment.P1192FLPLN.extmail.xyz.com@defragment-daemon
! conversion
conversion $U%conversion.P1192FLPLN.extmail.xyz.com@conversion-daemon
conversion.P1192FLPLN.extmail.xyz.com $U%conversion.P1192FLPLN.extmail.xyz.com@conversion-daemon
! bitbucket
bitbucket $U%bitbucket.P1192FLPLN.extmail.xyz.com@bitbucket-daemon
bitbucket.P1192FLPLN.extmail.xyz.com $U%bitbucket.P1192FLPLN.extmail.xyz.com@bitbucket-daemon
! deleted
deleted-daemon $U%$H@deleted-daemon
.deleted-daemon $U%$H@deleted-daemon
! inactive
inactive-daemon $U%$H@inactive-daemon
.inactive-daemon $U%$H@inactive-daemon
! hold
hold-daemon $U%$H@hold-daemon
.hold-daemon $U%$H@hold-daemon
! part II : channel blocks
defaults notices 1 2 4 7 copywarnpost copysendpost postheadonly noswitchchannel immnonurgent maxjobs 7 logging defaulthost extmail.xyz.com extmail.xyz.com
! delivery channel to local /var/mail store
l subdirs 20 viaaliasrequired maxjobs 7
P1192FLPLN.extmail.xyz.com
! ims-ms
ims-ms defragment subdirs 20 notices 1 7 14 21 28 backoff "pt5m" "pt10m" "pt30m" "pt1h" "pt2h" "pt4h" maxjobs 2 pool IMS_POOL fileinto $U+$S@$D
ims-ms-daemon
! native
native defragment subdirs 20 maxjobs 1
native-daemon
! pipe
pipe single defragment subdirs 20
pipe-daemon
! tcp_local
tcp_local smtp mx single_sys remotehost inner switchchannel identnonenumeric subdirs 20 maxjobs 7 pool SMTP_POOL maytlsserver maysaslserver saslswitchchannel tcp_auth missingrecipientpolicy 0 loopcheck daemon 10.8.51.126
tcp-daemon
! tcp_intranet
tcp_intranet smtp mx single_sys subdirs 20 dequeue_removeroute maxjobs 7 pool SMTP_POOL maytlsserver allowswitchchannel saslswitchchannel tcp_auth missingrecipientpolicy 4
tcp_intranet-daemon
! tcp_submit
tcp_submit submit smtp mx single_sys mustsaslserver maytlsserver missingrecipientpolicy 4
tcp_submit-daemon
! tcp_auth
tcp_auth smtp mx single_sys mustsaslserver missingrecipientpolicy 4
tcp_auth-daemon
! tcp_tas
tcp_tas smtp mx single_sys allowswitchchannel mustsaslserver maytlsserver deliveryflags 2
tcp_tas-daemon
! tcp_lmtpss (LMTP server - store)
!tcp_lmtpss lmtp flagtransfer
!tcp_lmtpss-daemon
! tcp_lmtpcs (LMTP client - store)
!tcp_lmtpcs defragment lmtp port 225 nomx single_sys subdirs 20 maxjobs 7 pool SMTP_POOL dequeue_removeroute
!lmtpcs-daemon
! reprocess
reprocess
reprocess-daemon
! process
process
process-daemon
! defragment
defragment
defragment-daemon
! conversion
conversion
conversion-daemon
! bitbucket
bitbucket
bitbucket-daemon
! deleted
deleted
deleted-daemon
! inactive
inactive
inactive-daemon
! hold
hold
hold-daemonand mappings file..
! MTA mappings file
! for access control and other table lookups
FROM_ACCESS
! Entries to block certain submissions normally would be inserted here,
! above the ntended-to-be-final entries that while permitting submission,
! merely disable any potential "vacation" effect.
! The following entries disable Sieve "vacation" action on lists sorts
! of addresses, as recommended by the Sieve "vacation" extension draft.
   *|SMTP*|*|*|MAILER-DAEMON@*|*    $!$Y
   *|SMTP*|*|*|LISTSERVE*@|*        $!$Y
   *|SMTP*|*|*|majordomo@*|*        $!$Y
   *|SMTP*|*|*|*-request@*|*        $!$Y
   *|SMTP*|*|*|*-owner@*|*          $!$Y
   *|SMTP*|*|*|owner-*@*|*          $!$Y
PORT_ACCESS
*|*|*|*|* $C$|INTERNAL_IP;$3|$Y$E
* $YEXTERNAL
INTERNAL_IP
$(10.8.55.49/24) $Y
$(10.8.51.125) $Y
$(10.8.51.126) $Y
127.0.0.1 $Y
* $N
ORIG_SEND_ACCESS
tcp_local|*|tcp_local|* $N$D30|Relaying$ not$ allowed
tcp_*|*|native|* $N
tcp_*|*|hold|* $N
tcp_*|*|pipe|* $N
tcp_*|*|ims-ms|* $N
! Block "external" submissions of explicitly source-routed "internal" addresses
tcp_local|*|tcp_intranet|@*:*.*   $N$D30|Explicit$ routing$ not$ allowed
tcp_local|*|tcp_intranet|*$%*@*   $N$D30|Explicit$ routing$ not$ allowed
tcp_local|*|tcp_intranet|*.*!*@* $N$D30|Explicit$ routing$ not$ allowed
tcp_local|*|tcp_intranet|"*@*"@* $N$D30|Explicit$ routing$ not$ allowed
SEND_ACCESS
tcp_*|*|*|*@[127.*] $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@localhost.* $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@example.com $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@example.net $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@example.org $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@*.test $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@*.example $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@*.invalid $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@*.localhost $X5.1.2|$NBad$ destination$ system
<IMTA_TABLE:mappings.localewe are able to receive mails from the gateway, but when using uwc to send the mail, the mail doesnt hit the gateway. trying a telnet from the messaging server to the gateway, works perfectly.
thanks in advance.

Pplsft compIntf adapter: "XML Error: 1:1: Content is not allowed in prolog"

Hi All,
I am using the peoplesoft component interface adapter in IDM 5.5 and IDM 6.0.
I configured the adapter, tested it successfully and enterred the details to create and provision a user to peoplesoft.
But whenever I click on the save button in the end of the creation wizard I get this error:
com.waveset.util.WavesetException: An error occurred adding user 'FX600859' to resource 'PeopleSoft Component Interface'. com.waveset.util.XmlParseException: XML Error: 1:1: Content is not allowed in prolog.I know the prolog is something about the first two lines and BOM and all - but this is like a really fresh install of IDM ( I tried and experienced the same error on both v 5.5 and 6.0) and have checked almost all the files which might be related to the user creation process.......... the error does not say which object has the defective prolog if at all..
I have also enabled trace for a lot of classes (incrementally of course since I failed to get any info from the earlier traces..) Here are the classes/ methods that I have set show trace on:
com.waveset.adapter.ResourceAdapterBase#createAccounts
com.waveset.util.XmlParseException
com.waveset.util.XmlUtil
com.waveset.util.XmlParser
com.waveset.adapter.PeopleSoftCompIntfcAdapter
com.waveset.object.GenericObject
com.waveset.adapter.ResourceAdapterBase
All have a level of 4..... (the most verbose)
here is the trace output:
20060302 15:53:58.286 http-8080-Processor3(0x017050f5) ResourceAdapterBase#getRequiredResAttr() Data Read/Write Component Interface Name== com.waveset.object.ResourceAttribute@f2f973
20060302 15:53:58.286 http-8080-Processor3(0x017050f5) ResourceAdapterBase#getRequiredResAttrVal() Data Read/Write Component Interface Name== USER_PROFILE
20060302 15:53:58.286 http-8080-Processor3(0x017050f5) ResourceAdapterBase#getFeatures() Info
<?xml version='1.0' encoding='UTF-8'?>
<!DOCTYPE Object PUBLIC 'waveset.dtd' 'waveset.dtd'>
<Object>
<Attribute name='account'>
    <Object>
      <Attribute name='CASE_INSENSITIVE_IDS' value='account.CASE_INSENSITIVE_IDS'/>
      <Attribute name='CREATE' value='account.CREATE'/>
      <Attribute name='DELETE' value='account.DELETE'/>
      <Attribute name='DISABLE' value='account.DISABLE'/>
      <Attribute name='ENABLE' value='account.ENABLE'/>
      <Attribute name='EXCLUDE' value='account.EXCLUDE'/>
      <Attribute name='ITERATOR' value='account.ITERATOR'/>
      <Attribute name='LIST' value='account.LIST'/>
      <Attribute name='LOGIN' value='account.LOGIN'/>
      <Attribute name='PASSWORD' value='account.PASSWORD'/>
      <Attribute name='UPDATE' value='account.UPDATE'/>
    </Object>
</Attribute>
</Object>
20060302 15:53:58.286 http-8080-Processor3(0x017050f5) ResourceAdapterBase#getFeatures() Exit returned= { account={ DISABLE=account.DISABLE, DELETE=account.DELETE, CASE_INSENSITIVE_IDS=account.CASE_INSENSITIVE_IDS, UPDATE=account.UPDATE, EXCLUDE=account.EXCLUDE, PASSWORD=account.PASSWORD, ENABLE=account.ENABLE, LIST=account.LIST, LOGIN=account.LOGIN, ITERATOR=account.ITERATOR, CREATE=account.CREATE } }
20060302 15:53:58.286 Provisioning for Configurator(0x017050f5) PeopleSoftCompIntfcAdapter#getUser() Entry no args
20060302 15:53:58.286 Provisioning for Configurator(0x017050f5) ResourceAdapterBase#getIdentity() Entry arg1=user=User:600859
20060302 15:53:58.286 Provisioning for Configurator(0x017050f5) ResourceAdapterBase#getIdentity() Exit returned= FX600859
20060302 15:53:58.286 Provisioning for Configurator(0x017050f5) PeopleSoftCompIntfcAdapter#getUser() Info Getting identity FX600859
20060302 15:53:58.286 Provisioning for Configurator(0x017050f5) PeopleSoftCompIntfcAdapter#connect() Entry no args
20060302 15:53:58.286 Provisioning for Configurator(0x017050f5) ResourceAdapterBase#getRequiredResAttr() Data host== com.waveset.object.ResourceAttribute@1d6fad7
20060302 15:53:58.286 Provisioning for Configurator(0x017050f5) ResourceAdapterBase#getRequiredResAttrVal() Data host== chslx07.corp.fedex.com
20060302 15:53:58.286 Provisioning for Configurator(0x017050f5) ResourceAdapterBase#getOptionalStringResAttrVal() Data port== 18100
20060302 15:53:58.286 Provisioning for Configurator(0x017050f5) ResourceAdapterBase#getRequiredResAttr() Data User== com.waveset.object.ResourceAttribute@ee5d13
20060302 15:53:58.286 Provisioning for Configurator(0x017050f5) ResourceAdapterBase#getRequiredResAttrVal() Data User== IBCMGR
20060302 15:53:58.286 Provisioning for Configurator(0x017050f5) ResourceAdapterBase#getRequiredResAttr() Data Password== com.waveset.object.ResourceAttribute@1209d56
20060302 15:53:58.286 Provisioning for Configurator(0x017050f5) ResourceAdapterBase#getRequiredResAttrVal() Data Password== 88AF52E54FD71942:549D63D0:1098ECAEC1A:-7FFD|QS8v8QpqGTI=
20060302 15:53:58.396 Provisioning for Configurator(0x017050f5) PeopleSoftCompIntfcAdapter#connect() Info Successful connection with ISession psft.pt8.joa.Session@30380
20060302 15:53:58.396 Provisioning for Configurator(0x017050f5) PeopleSoftCompIntfcAdapter#connect() Exit void
20060302 15:53:58.396 Provisioning for Configurator(0x017050f5) ResourceAdapterBase#getRequiredResAttr() Data Read/Write Component Interface Name== com.waveset.object.ResourceAttribute@f2f973
20060302 15:53:58.396 Provisioning for Configurator(0x017050f5) ResourceAdapterBase#getRequiredResAttrVal() Data Read/Write Component Interface Name== USER_PROFILE
20060302 15:53:58.396 Provisioning for Configurator(0x017050f5) PeopleSoftCompIntfcAdapter#getComponentInterface() Info Fetching compIntfcName 'USER_PROFILE'
20060302 15:53:58.546 Provisioning for Configurator(0x017050f5) PeopleSoftCompIntfcAdapter#getComponentInterface() Info Successfully got compIntfcName 'USER_PROFILE
20060302 15:53:58.546 Provisioning for Configurator(0x017050f5) PeopleSoftCompIntfcAdapter#invoke() Info
Begin JOA method USER_PROFILE.setProperty {UserID,FX600859}
20060302 15:53:58.546 Provisioning for Configurator(0x017050f5) PeopleSoftCompIntfcAdapter#invoke() Info --Returned: null
20060302 15:53:58.546 Provisioning for Configurator(0x017050f5) PeopleSoftCompIntfcAdapter#invoke() Info End JOA method USER_PROFILE.setProperty
20060302 15:53:58.546 Provisioning for Configurator(0x017050f5) PeopleSoftCompIntfcAdapter#invoke() Info
Begin JOA method USER_PROFILE.invokeMethod {Get, {} }
20060302 15:53:58.656 Provisioning for Configurator(0x017050f5) PeopleSoftCompIntfcAdapter#invoke() Info --Returned: [java.lang.Boolean] = false
20060302 15:53:58.656 Provisioning for Configurator(0x017050f5) PeopleSoftCompIntfcAdapter#invoke() Info End JOA method USER_PROFILE.invokeMethod
20060302 15:53:58.656 Provisioning for Configurator(0x017050f5) PeopleSoftCompIntfcAdapter#connect() Info Disconnecting from ISession psft.pt8.joa.Session@30380
20060302 15:53:58.656 Provisioning for Configurator(0x017050f5) PeopleSoftCompIntfcAdapter#getUser() Exit void
20060302 15:53:58.666 Provisioning for Configurator(0x017050f5) ResourceAdapterBase#getFeatures() Entry no args
20060302 15:53:58.666 Provisioning for Configurator(0x017050f5) ResourceAdapterBase#getRequiredResAttr() Data Read/Write Component Interface Name== com.waveset.object.ResourceAttribute@f2f973
20060302 15:53:58.666 Provisioning for Configurator(0x017050f5) ResourceAdapterBase#getRequiredResAttrVal() Data Read/Write Component Interface Name== USER_PROFILE
20060302 15:53:58.666 Provisioning for Configurator(0x017050f5) ResourceAdapterBase#getFeatures() Info
<?xml version='1.0' encoding='UTF-8'?>
<!DOCTYPE Object PUBLIC 'waveset.dtd' 'waveset.dtd'>
<Object>
<Attribute name='account'>
    <Object>
      <Attribute name='CASE_INSENSITIVE_IDS' value='account.CASE_INSENSITIVE_IDS'/>
      <Attribute name='CREATE' value='account.CREATE'/>
      <Attribute name='DELETE' value='account.DELETE'/>
      <Attribute name='DISABLE' value='account.DISABLE'/>
      <Attribute name='ENABLE' value='account.ENABLE'/>
      <Attribute name='EXCLUDE' value='account.EXCLUDE'/>
      <Attribute name='ITERATOR' value='account.ITERATOR'/>
      <Attribute name='LIST' value='account.LIST'/>
      <Attribute name='LOGIN' value='account.LOGIN'/>
      <Attribute name='PASSWORD' value='account.PASSWORD'/>
      <Attribute name='UPDATE' value='account.UPDATE'/>
    </Object>
</Attribute>
</Object>
20060302 15:53:58.666 Provisioning for Configurator(0x017050f5) ResourceAdapterBase#getFeatures() Exit returned= { account={ DISABLE=account.DISABLE, DELETE=account.DELETE, CASE_INSENSITIVE_IDS=account.CASE_INSENSITIVE_IDS, UPDATE=account.UPDATE, EXCLUDE=account.EXCLUDE, PASSWORD=account.PASSWORD, ENABLE=account.ENABLE, LIST=account.LIST, LOGIN=account.LOGIN, ITERATOR=account.ITERATOR, CREATE=account.CREATE } }
20060302 15:53:58.666 Provisioning for Configurator(0x017050f5) ResourceAdapterBase#createAccounts() Entry arg1=num users: 1
20060302 15:53:58.666 Provisioning for Configurator(0x017050f5) ResourceAdapterBase#startConnectionWrapper() Entry no args
20060302 15:53:58.666 Provisioning for Configurator(0x017050f5) PeopleSoftCompIntfcAdapter#connect() Entry no args
20060302 15:53:58.666 Provisioning for Configurator(0x017050f5) ResourceAdapterBase#getRequiredResAttr() Data host== com.waveset.object.ResourceAttribute@1d6fad7
20060302 15:53:58.666 Provisioning for Configurator(0x017050f5) ResourceAdapterBase#getRequiredResAttrVal() Data host== chslx07.corp.fedex.com
20060302 15:53:58.666 Provisioning for Configurator(0x017050f5) ResourceAdapterBase#getOptionalStringResAttrVal() Data port== 18100
20060302 15:53:58.666 Provisioning for Configurator(0x017050f5) ResourceAdapterBase#getRequiredResAttr() Data User== com.waveset.object.ResourceAttribute@ee5d13
20060302 15:53:58.666 Provisioning for Configurator(0x017050f5) ResourceAdapterBase#getRequiredResAttrVal() Data User== IBCMGR
20060302 15:53:58.666 Provisioning for Configurator(0x017050f5) ResourceAdapterBase#getRequiredResAttr() Data Password== com.waveset.object.ResourceAttribute@1209d56
20060302 15:53:58.666 Provisioning for Configurator(0x017050f5) ResourceAdapterBase#getRequiredResAttrVal() Data Password== 88AF52E54FD71942:549D63D0:1098ECAEC1A:-7FFD|QS8v8QpqGTI=
20060302 15:53:58.776 Provisioning for Configurator(0x017050f5) PeopleSoftCompIntfcAdapter#connect() Info Successful connection with ISession psft.pt8.joa.Session@158473e
20060302 15:53:58.776 Provisioning for Configurator(0x017050f5) PeopleSoftCompIntfcAdapter#connect() Exit void
20060302 15:53:58.776 Provisioning for Configurator(0x017050f5) ResourceAdapterBase#startConnectionWrapper() Exit void
20060302 15:53:58.776 Provisioning for Configurator(0x017050f5) PeopleSoftCompIntfcAdapter#realCreate() Entry no args
20060302 15:53:58.776 Provisioning for Configurator(0x017050f5) ResourceAdapterBase#getIdentity() Entry arg1=user=User:600859
20060302 15:53:58.776 Provisioning for Configurator(0x017050f5) ResourceAdapterBase#getIdentity() Exit returned= FX600859
20060302 15:53:58.776 Provisioning for Configurator(0x017050f5) PeopleSoftCompIntfcAdapter#realCreate() Info Creating identity FX600859
20060302 15:53:58.776 Provisioning for Configurator(0x017050f5) ResourceAdapterBase#getRequiredResAttr() Data Read/Write Component Interface Name== com.waveset.object.ResourceAttribute@f2f973
20060302 15:53:58.776 Provisioning for Configurator(0x017050f5) ResourceAdapterBase#getRequiredResAttrVal() Data Read/Write Component Interface Name== USER_PROFILE
20060302 15:53:58.776 Provisioning for Configurator(0x017050f5) PeopleSoftCompIntfcAdapter#getComponentInterface() Info Fetching compIntfcName 'USER_PROFILE'
20060302 15:53:58.997 Provisioning for Configurator(0x017050f5) PeopleSoftCompIntfcAdapter#getComponentInterface() Info Successfully got compIntfcName 'USER_PROFILE
20060302 15:53:58.997 Provisioning for Configurator(0x017050f5) PeopleSoftCompIntfcAdapter#invoke() Info
Begin JOA method USER_PROFILE.setProperty {UserID,FX600859}
20060302 15:53:58.997 Provisioning for Configurator(0x017050f5) PeopleSoftCompIntfcAdapter#invoke() Info --Returned: null
20060302 15:53:58.997 Provisioning for Configurator(0x017050f5) PeopleSoftCompIntfcAdapter#invoke() Info End JOA method USER_PROFILE.setProperty
20060302 15:53:58.997 Provisioning for Configurator(0x017050f5) PeopleSoftCompIntfcAdapter#invoke() Info
Begin JOA method USER_PROFILE.invokeMethod {Create, {} }
20060302 15:53:59.618 Provisioning for Configurator(0x017050f5) PeopleSoftCompIntfcAdapter#invoke() Info --Returned: [java.lang.Boolean] = true
20060302 15:53:59.618 Provisioning for Configurator(0x017050f5) PeopleSoftCompIntfcAdapter#invoke() Info End JOA method USER_PROFILE.invokeMethod
20060302 15:53:59.618 Provisioning for Configurator(0x017050f5) PeopleSoftCompIntfcAdapter#setCIFromWSUSer() Entry arg1=600859
20060302 15:53:59.618 Provisioning for Configurator(0x017050f5) PeopleSoftCompIntfcAdapter#setCIFromWSUSer() Info Setting user 'User:600859'
20060302 15:53:59.618 Provisioning for Configurator(0x017050f5) ResourceAdapterBase#getIdentity() Entry arg1=user=User:600859
20060302 15:53:59.618 Provisioning for Configurator(0x017050f5) ResourceAdapterBase#getIdentity() Exit returned= FX600859
20060302 15:53:59.618 Provisioning for Configurator(0x017050f5) ResourceAdapterBase#getRequiredResAttr() Data Read/Write Component Interface Name== com.waveset.object.ResourceAttribute@f2f973
20060302 15:53:59.618 Provisioning for Configurator(0x017050f5) ResourceAdapterBase#getRequiredResAttrVal() Data Read/Write Component Interface Name== USER_PROFILE
20060302 15:53:59.618 Provisioning for Configurator(0x017050f5) PeopleSoftCompIntfcAdapter#invoke() Info
Begin JOA method USER_PROFILE.setProperty {EmailAddress,[email protected]}
20060302 15:53:59.618 Provisioning for Configurator(0x017050f5) PeopleSoftCompIntfcAdapter#invoke() Info --Returned: null
20060302 15:53:59.618 Provisioning for Configurator(0x017050f5) PeopleSoftCompIntfcAdapter#invoke() Info End JOA method USER_PROFILE.setProperty
20060302 15:53:59.618 Provisioning for Configurator(0x017050f5) ResourceAdapterBase#getRequiredResAttr() Data Read/Write Component Interface Name== com.waveset.object.ResourceAttribute@f2f973
20060302 15:53:59.618 Provisioning for Configurator(0x017050f5) ResourceAdapterBase#getRequiredResAttrVal() Data Read/Write Component Interface Name== USER_PROFILE
20060302 15:53:59.618 Provisioning for Configurator(0x017050f5) ResourceAdapterBase#getRequiredResAttr() Data Read/Write Component Interface Name== com.waveset.object.ResourceAttribute@f2f973
20060302 15:53:59.618 Provisioning for Configurator(0x017050f5) ResourceAdapterBase#getRequiredResAttrVal() Data Read/Write Component Interface Name== USER_PROFILE
20060302 15:53:59.618 Provisioning for Configurator(0x017050f5) PeopleSoftCompIntfcAdapter#invoke() Info
Begin JOA method USER_PROFILE.setProperty {SymbolicID,COEDEV}
20060302 15:53:59.618 Provisioning for Configurator(0x017050f5) PeopleSoftCompIntfcAdapter#invoke() Info --Returned: null
20060302 15:53:59.618 Provisioning for Configurator(0x017050f5) PeopleSoftCompIntfcAdapter#invoke() Info End JOA method USER_PROFILE.setProperty
20060302 15:53:59.618 Provisioning for Configurator(0x017050f5) ResourceAdapterBase#getRequiredResAttr() Data Read/Write Component Interface Name== com.waveset.object.ResourceAttribute@f2f973
20060302 15:53:59.618 Provisioning for Configurator(0x017050f5) ResourceAdapterBase#getRequiredResAttrVal() Data Read/Write Component Interface Name== USER_PROFILE
20060302 15:53:59.628 Provisioning for Configurator(0x017050f5) PeopleSoftCompIntfcAdapter#realCreate() Exit void
20060302 15:53:59.628 Provisioning for Configurator(0x017050f5) ResourceAdapterBase#getIdentity() Entry arg1=user=User:600859
20060302 15:53:59.628 Provisioning for Configurator(0x017050f5) ResourceAdapterBase#getIdentity() Exit returned= FX600859
20060302 15:53:59.628 Provisioning for Configurator(0x017050f5) ResourceAdapterBase#createAccounts() Info
==> com.waveset.util.WavesetException:
==> com.waveset.util.XmlParseException: XML Error: 1:1: Content is not allowed in prolog.
20060302 15:53:59.638 Provisioning for Configurator(0x017050f5) PeopleSoftCompIntfcAdapter#connect() Info Disconnecting from ISession psft.pt8.joa.Session@158473e
20060302 15:53:59.638 Provisioning for Configurator(0x017050f5) ResourceAdapterBase#createAccounts() Exit voidNow what I see is that the error is generated as an exception in the class/method: ResourceAdapterBase#createAccounts()
but I have not been able to get any deeper than that....
Can someoe please help me in resolving this issue.. or is there someway I can dig deeper.. to maybe understand which file / object is causing the error??
Thanks and best regards,
Anoop

Hi Anoop / Ilayarajan,
Could you please post the solution for this error. When I provision a user to PeopleSoft, I am getting similar error: com.waveset.util.WavesetException: An error occurred adding user "userID' to resource 'PeopleSoft Component Interface'. com.waveset.util.XmlParseException: XML Error: 1:1: Content is not allowed in prolog.
Thanks
User_idm

[Fatal Error] :1:1: Content is not allowed in prolog.

I'm trying to compare an XML file to an XSLT generated file from that XML file, and when I run the the class as a JUnit Test, I get the following:
[Fatal Error] :1:1: Content is not allowed in prolog.
org.xml.sax.SAXParseException: Content is not allowed in prolog.
     at com.sun.org.apache.xerces.internal.parsers.DOMParser.parse(Unknown Source)
     at com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderImpl.parse(Unknown Source)
     at org.custommonkey.xmlunit.XMLUnit.buildDocument(XMLUnit.java:352)
     at org.custommonkey.xmlunit.XMLUnit.buildDocument(XMLUnit.java:339)
     at org.custommonkey.xmlunit.XMLUnit.buildControlDocument(XMLUnit.java:283)
     at org.custommonkey.xmlunit.Diff.<init>(Diff.java:116)
     at org.custommonkey.xmlunit.examples.MyXMLTestCase.testXSLTransformation(MyXMLTestCase.java:70)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at junit.framework.TestCase.runTest(TestCase.java:164)
     at junit.framework.TestCase.runBare(TestCase.java:130)
     at junit.framework.TestResult$1.protect(TestResult.java:106)
     at junit.framework.TestResult.runProtected(TestResult.java:124)
     at junit.framework.TestResult.run(TestResult.java:109)
     at junit.framework.TestCase.run(TestCase.java:120)
     at junit.framework.TestSuite.runTest(TestSuite.java:230)
     at junit.framework.TestSuite.run(TestSuite.java:225)
     at org.eclipse.jdt.internal.junit.runner.junit3.JUnit3TestReference.run(JUnit3TestReference.java:130)
     at org.eclipse.jdt.internal.junit.runner.TestExecution.run(TestExecution.java:38)
     at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:460)
     at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:673)
     at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.run(RemoteTestRunner.java:386)
     at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.main(RemoteTestRunner.java:196)
Any ideas?

In my experience, "Content is not allowed in prolog" usually means your XML file is stored in the UTF-8 encoding with a BOM. Java's UTF-8 Charset doesn't recognize the UTF-8 BOM; it decodes it and passes it along like any other character, then the XML parser chokes on it.
To get rid of the BOM you can open the XML file in a text editor and (depending on the editor) either (1) save the file as UTF-8 without BOM, or (2) switch to hexadecimal and delete the first three bytes (EF, BB, BF).

[Fatal Error] :1:2: Content is not allowed in prolog.

I am trying to parse input stream i amgetting this error please help me
[Fatal Error] :1:2: Content is not allowed in prolog.
org.xml.sax.SAXParseException: Content is not allowed in prolog.
     at org.apache.xerces.parsers.DOMParser.parse(Unknown Source)
     at org.apache.xerces.jaxp.DocumentBuilderImpl.parse(Unknown Source)
     at javax.xml.parsers.DocumentBuilder.parse(DocumentBuilder.java:98)
     at it.Test.DomParserExample.parseXmlFile(DomParserExample.java:90)
     at it.Test.DomParserExample.getParsedXml(DomParserExample.java:50)
     at it.sella.dbu.helper.DaoHelper.parseClobData(DaoHelper.java:28)
     at it.Test.ClobTest.getRequestView(ClobTest.java:122)
     at it.Test.ClobTest.main(ClobTest.java:30)
Exception in thread "main" java.lang.NullPointerException
     at it.Test.DomParserExample.parseDocument(DomParserExample.java:104)
     at it.Test.DomParserExample.getParsedXml(DomParserExample.java:52)
     at it.sella.dbu.helper.DaoHelper.parseClobData(DaoHelper.java:28)
     at it.Test.ClobTest.getRequestView(ClobTest.java:122)
     at it.Test.ClobTest.main(ClobTest.java:30)
Message was edited by:
raj25amigo

Thanks buddy ..it was a malformed XML i missed out a tag

WavesetException: XML Error: 1:1: Content is not allowed in prolog. error

What gives?
I have turned the exception trace on (why it is not on by default is a surprise) and when I try to create a standard Weekly Audit Report, (Activity this Week) I now get to see this exception.
How on earth can IdM generate a badly formed XML report/document!?
When I try to generate a Weekly Activity report, Idm reports to the screen that the Task is complete and then bombs out with the following exception, showing NullPointerError message on the screen.
What chances are there of trapping where in Idm this fault lies?
[#|2011-11-16T15:18:44.609+0200|INFO|glassfish3.1.1|javax.enterprise.system.std.com.sun.enterprise.server.logging|_ThreadID=94;_ThreadName=Thread-2;|WavesetException: XML Error: 1:1: Content is not allowed in prolog.|#]
[#|2011-11-16T15:18:44.612+0200|SEVERE|glassfish3.1.1|javax.enterprise.system.std.com.sun.enterprise.server.logging|_ThreadID=94;_ThreadName=Thread-2;|com.waveset.util.XmlParseException: XML Error: 1:1: Content is not allowed in prolog.
at com.waveset.util.WavesetException.checkBreakpoint(WavesetException.java:508)
at com.waveset.util.WavesetException.<init>(WavesetException.java:109)
at com.waveset.util.XmlParseException.<init>(XmlParseException.java:61)
at com.waveset.util.XmlParser.wrapException(XmlParser.java:927)
at com.waveset.util.XmlParser.parseString(XmlParser.java:561)
at com.waveset.util.XmlUtil.parseString(XmlUtil.java:441)
at com.waveset.util.XmlObjectFactory.create(XmlObjectFactory.java:322)
at com.waveset.util.XmlObjectFactory.create(XmlObjectFactory.java:302)
at com.waveset.rpc.ActivityStatusServlet.getTaskStatus(ActivityStatusServlet.java:426)
at com.waveset.rpc.ActivityStatusServlet.getTaskStatus(ActivityStatusServlet.java:403)
at com.waveset.rpc.ActivityStatusServlet.processRequest(ActivityStatusServlet.java:360)
at com.waveset.rpc.ActivityStatusServlet.doGet(ActivityStatusServlet.java:262)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:734)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:847)
at org.apache.catalina.core.StandardWrapper.service(StandardWrapper.java:1539)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:343)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:217)
at com.sun.idm.profiler.instrumentation.RequestTimingFilter.doFilter(RequestTimingFilter.java:76)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:256)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:217)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:279)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:655)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:595)
at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:98)
at com.sun.enterprise.web.PESessionLockingStandardPipeline.invoke(PESessionLockingStandardPipeline.java:91)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:162)
at org.apache.catalina.connector.CoyoteAdapter.doService(CoyoteAdapter.java:330)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:231)
at com.sun.enterprise.v3.services.impl.ContainerMapper.service(ContainerMapper.java:174)
at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:828)
at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:725)
at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:1019)
at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:225)
at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:137)
at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:104)
at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:90)
at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:79)
at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:54)
at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:59)
at com.sun.grizzly.ContextTask.run(ContextTask.java:71)
at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadPool.java:532)
at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool.java:513)
at java.lang.Thread.run(Thread.java:722)
|#]

Hi Anoop / Ilayarajan,
Could you please post the solution for this error. When I provision a user to PeopleSoft, I am getting similar error: com.waveset.util.WavesetException: An error occurred adding user "userID' to resource 'PeopleSoft Component Interface'. com.waveset.util.XmlParseException: XML Error: 1:1: Content is not allowed in prolog.
Thanks
User_idm

Content generation error. [Error: Duplicate overlay IDs are not allowed]

Has anyone else experienced this? I'm creating a hidden navigation menu that has buttons for showing and hiding it. When the menu is on, there are a number of buttons grouped together in one of the states. It works when I preview with the preview tool, but when I try to preview through Folio Builder I get the error message: Content generation error. [Error: Duplicate overlay IDs are not allowed]
All of my multi-state objects have unique names, as do buttons and layers and I still get this error. Any ideas?
Thanks,
Christopher

Attached are screenshots of my layers palette, object states and buttons. I noticed in the layers palette, after I've made the menu into a multi-state object there's a sub-group called "normal" that's showing up in my layers palette. Could this be it?

"Program Error" in PS/CS6 does not allow me to save in any format.

"Program Error" in PS/CS6 does not allow me to save in any format. I can't save as psd, jpg, tiff, large document format, etc. My only option is to quit without saving an hour's work. This has happened a dozen times sporadically.

Boilerplate text from Best Practices FAQ:
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
    * Adobe product and version number
    * Operating system and version number
    * The full text of any error message(s)
    * What you were doing when the problem occurred
    * Screenshots of the problem
    * Computer hardware, such as CPU; GPU; amount of RAM; etc.
In addition; are you saving to a local drive? External drive? Network drive?
Have you tried any of the standard fixes like resetting your preferences?

Funds Management BCS error: Combination ENTR / A1 is not allowed in budget

Similar Messages

Maybe you are looking for