Funds management data sources not available in RSA5
Dear all,
We have got requiremnt for implemtation of Funds management.
i have searched SDN for the same. my question is the data sources 0FI_FM_1 , 0FI_FM_2, 0FI_FM_31 ,0FI_FM_32 ....are availabel from help.
But in the system (RSA% )when i wanted to see these data sources then i cant find them.
what is the reason for that and how to go about it.
Regards
venu
Hi Venu,
The datasources u mentioned are now replaced with new datasources.
Please got through the thread for further information.
Datasource not present in RSA5 after appln component hierarchy activation
Hope it helps
Regards,
Javed
Similar Messages
-
hi all,
i am installing the cube 0fiap_c03.when i am looking into the master data attribute(DATA SOURCES) for objects 0DUNN_BLOCK ,0DUNN_KEY, 0PMNT_BLOCK, 0PYMT_METH, 0SP_GL_IND in RSA5 they r not available.
but in my bw system the info sources r there for those objects.how can i resolve this issue.where to find them.
i need ur suggestions on this regard.
thanks in advance
sriFor those objects some one might installed all the infosources.
regarding datasources for those objects, check whether the required pathes are installed in r/3 side.
Message was edited by: vsn -
Data Federator data source not available causes Universe Connection error
I created a Data Federator project that connects to 20 servers across US and Canada. All data sources are SQL Server 2005. The DF project maps 40 source objects into 4 target objects. I created a universe based on the DF project and we have been quite pleased with Webi query response. Today one of the source servers was taken off line and this generated a connection error when trying to access the universe (not trying to access the data source that failed). We do not want the universe connection to error when one source server is not available u2013 is that possible?
If the answer is no then I see us abandoning what appears to be a great solution for real time distributed reporting and resorting to ETL and moving data.Hi Chapman,
Can you be little elobrate on what you have done to solve the issue.
Thanks,
Dayanand -
ODBC Data Source Not Available
Completed installation of Oracle Business Intelligence Enterprise Edition, when attempting to configure data source, Oracle in OraClient 10g home 2 is not an available driver, attempting to connect to an Oracle Database, can connect correctly PL SQL? Oracle BI Server is shown?
I am not sure i understand your question. Do you have Oracle Client Installed? This is required for connecting to an Oracle Database. If you have some issues with OCI try connecting using ODBC. If the ODBC works then OCI should also work. I believe there might some conflict of your Oracle homes.
Thanks,
Venkat
http://oraclebizint.wordpress.com -
Master Data Attributes Not available in RSA5
Hi all,
i am doing master data loading for MM Purchasing
i am not able to find Master Data Attributes in RSA5
0INFO_TYPE_ATTR
0MATERIAL_ATTR
0MATL_GROUP_ATTR
0PURCH_ORG_ATTR
please tell me where can i find those missing attribures?I usually just do like this in the datasource tree -> set the cursor on the highest level (SAP) -> edit menu -> expand -> use the normal search functionality.
But as far as I remember there are no business content datasources for 0INFO_TYPE, 0MATL_GROUP or 0PURCH_ORG because they all are just attributes.
If you just need to load the texts, there are text datasources available for all the objects.
Hope it helps.
BR
Stefan -
[unixODBC][Driver Manager]Data source name not found, and no default driver
Hi,
I'm running
Red Hat Linux 5, MySQL and BOXI 3.1
I try and schedule a report in the CMC and the report fails with the error
A database error occured. The database error text is: {Driver Manager} Data source name not found, and no default driver specified. (WIS 10901)
I've went through the steps in the Bus Obj's Documentation outlining how to install the unixODBC (though this doco was for R2 - I'm not certain whether this install is needed for 3.1).
Error WIS 10901 details
Database error: . Contact your administrator or database supplier+
for more information. (WIS 10901)
The database that provides the data to this document has generated an error.
Cause
Details about the error are provided in the section of the message indicated
+by the field code: .
Contact your BusinessObjects administrator with the error message
Action
information or consult the documentation provided by the supplier of the
database.
Any pointers suggestions on how to set up correctly the unixODBC will be looked into.
Thanks for taking the time to view this post.
CheersHi again Aravind,
I hope you're not beginning to wish you had never answered that first question from me since it seems as if I'm now backing up the truck with regard to the entire question. If I'm asking too much from you let me know I don't wanna overstep the line with repect to what should and shouln't be asked in these forums'
anyway I looked in that env.sh script. It was huge (pity I can't attach the file, I've appended it but it makes these threads somewhat lengthy)
DEFAULT_ODBCFILE="$BOBJEDIR"defaultodbc.ini
export DEFAULT_ODBCFILE
+ODBC_HOME="$odbc"+
export ODBC_HOME
also
# setup the mysql env variables
if [ -d "$BOBJEDIR"/mysql ]; then
# mysql env variables
set up the odbc symlink to work around:*
The DataDirect SQL Server ODBC driver on UNIX will not function properly under a*
locale other than "en_US" due to strong dependencies on their locale files.*
MYSQL_UNIX_PORT="$BOBJEDIR"mysql/mysql.sock
export MYSQL_UNIX_PORT
We want to be able to source the config file multiple times.
fi
if [ -d "$BOBJEDIR"/tomcat ]; then
set the JAVA_OPTS for tomcat
I see what you were referring to earlier with
if [ -d "$ODBC_HOME/locale" ]; then
the javascript files are kept here
The machine name
The user name
MYLOCALE=`locale | grep LC_MESSAGES | sed -e 's|LC_MESSAGES="||g' -e 's|"$||g'`The default registry
if [ ! -d "$ODBC_HOME/locale/$MYLOCALE" ]; then
ln -s "$ODBC_HOME/locale/en_US" "$ODBC_HOME/locale/$MYLOCALE"
fi
fi
Again cheers for your help in this matter.
#!/bin/sh
BOBJEDIR="/home/eberwick/BO_3_1/bobje/"
export BOBJEDIR
BODIR="`dirname $BOBJEDIR`/"
export BODIR
DEFAULTFILE="$
check for existence of u flag, if it is there, turn it off.
Set a flag so we don't source the environment more than once
webi config file
ccm.config"
if [ -f "$DEFAULTFILE" ]; then
. "$DEFAULTFILE"
fi
. "${BOBJEDIR?}setup/modify_ko_locale.sh"
SOFTWARE=`uname -s`
OBJECT_MODEL=`grep Platform $BODIR/setup/ProductID.txt | awk '{print $4;}'`
[ -z "$OBJECT_MODEL" ] && OBJECT_MODEL=32
SOFTWAREPATH=`grep SoftwarePath $BODIR/setup/ProductID.txt | awk '{print $3;}'`
U_FLAG=0
if [ X"$SOFTWARE" = "XHP-UX" ]; then
unset the LANG so that we don't get the localized version of 'unlimited' if the localized system messages are installed.
raise the ulimits to max allowed
undo that bug workaround from above
figure out what architecture we're on
now that we're localized, deal with unknown architecture
we include English, as localization may have failed
set the JDK variable
if [ x`echo $- | grep "u"` != "x" ]; then
set +u
U_FLAG=1
fi
fi
if [ x"$BOBJE_ENV_SOURCED" = x ]; then
if [ -f "$setup/boconfig.cfg" ]; then
HKEY_LOCAL_MACHINE="$setup/boconfig.cfg"
export HKEY_LOCAL_MACHINE
fi
BOBJE_ENV_SOURCED="true"
export BOBJE_ENV_SOURCED
BOBJEVERSION="12.0"
export BOBJEVERSION
LANGWAS="$LANG"
unset LANG
LC_ALLWAS="$LC_ALL"
unset LC_ALL
ulimit -Sn `ulimit -Hn` # max file descriptors
ulimit -S -c `ulimit -H -c` # max core file size
ulimit -S -d `ulimit -H -d` # max data segment size
ulimit -S -f `ulimit -H -f` # max file size
ulimit -S -s `ulimit -H -s` # max stack
ulimit -S -t `ulimit -H -t` # max CPU time
LANG="$LANGWAS"; export LANG
unset LANGWAS
LC_ALL="$LC_ALLWAS"; export LC_ALL
unset LC_ALLWAS
case X"$SOFTWARE" in
XLinux) SOFTWARELC="linux"; SHAREDLIBSUFFIX=".so"; CB1LIBSUFFIX="${SHAREDLIBSUFFIX?}.12.0"; CB1SYMLINKLIBSUFFIX="${SHAREDLIBSUFFIX?}.12" ;;
XAIX) SOFTWARELC="aix"; SHAREDLIBSUFFIX=".so"; CB1LIBSUFFIX=".12.0${SHAREDLIBSUFFIX?}"; CB1SYMLINKLIBSUFFIX=".12${SHAREDLIBSUFFIX?}";;
XSunOS) SOFTWARELC="solaris"; SHAREDLIBSUFFIX=".so"; CB1LIBSUFFIX="${SHAREDLIBSUFFIX?}.12.0"; CB1SYMLINKLIBSUFFIX="${SHAREDLIBSUFFIX?}.12";;
XHP-UX)
SOFTWARELC="hpux";
if [ "$SOFTWAREPATH" = "hpux_ia64" ]; then
SHAREDLIBSUFFIX=".so";
else
SHAREDLIBSUFFIX=".sl";
fi
CB1LIBSUFFIX="${SHAREDLIBSUFFIX?}.12.0";
CB1SYMLINKLIBSUFFIX="${SHAREDLIBSUFFIX?}.12";;
esac
export SOFTWAREPATH
export SOFTWARE
export SHAREDLIBSUFFIX
export CB1LIBSUFFIX
export CB1SYMLINKLIBSUFFIX
if [ "$SOFTWAREPATH" = "" ]; then
echo "$UNKNOWNPLATFORM (unknown platform): $SOFTWARE"
exit 1
fi
if [ -d "$BOBJEDIR"/jdk ]; then
JAVA_HOME="$jdk"
export JAVA_HOME
fi
JAVA_OPTS="-d$OBJECT_MODEL -Dbobj.enterprise.home=$
fi
setting AAHOME here so when CAD starts the value is set
enterprise120 -Djava.awt.headless=true -Djava.net.preferIPv4Stack=false"
if [ "$SOFTWARE" = "AIX" -o "$SOFTWARE" = "SunOS" -o "$SOFTWARE" = "Linux" -o "$SOFTWARE" = "HP-UX" ]; then
JAVA_OPTS="$JAVA_OPTS -Xmx1024m -XX:MaxPermSize=256m"
fi
export JAVA_OPTS
if [ -d "$Dashboard_Analytics_120" ]; then
AAHOME="$Dashboard_Analytics_120"
export AAHOME
fi
WCSDIR="$enterprise120/$SOFTWAREPATH/wcs/"
export WCSDIR
WCSBINDIR="$bin/"
export WCSBINDIR
WCSCOMPONENTDIR="$components/"
export WCSCOMPONENTDIR
BINDIR="$enterprise120/$SOFTWAREPATH/"
export BINDIR
LIBDIR="$enterprise120/$SOFTWAREPATH/"
export LIBDIR
PLUGINDIR="$enterprise120/packages/"
export PLUGINDIR
PLUGINDIST="$enterprise120/$SOFTWAREPATH/plugins/"
export PLUGINDIST
LOGDIR="$append the new valuelogging/"
export LOGDIR
if [ x"$BOE_LOGGER_ENVIRONMENT" = x ]; then
BOE_LOGGER_ENVIRONMENT="-loggingPath $LOGDIR"
else
BOE_LOGGER_ENVIRONMENT="$BOE_LOGGER_ENVIRONMENT -loggingPath $LOGDIR"
fi
export BOE_LOGGER_ENVIRONMENT
SCRIPTDIR="$enterprise120/generic/"
export SCRIPTDIR
JAVASCRIPTDIR="$setup/jscripts/"
export JAVASCRIPTDIR
MACHINENAME=`uname -n`
export MACHINENAME
removeUTF8SpecificsForKorean
STRIPPEDMACHINENAME=`hostname | sed -e 's/\..*//'`
export STRIPPEDMACHINENAME
if [ x"$BOBJEUSERNAME" = x ]; then
BOBJEUSERNAME=`id | sed -e "s|).\$||" -e "s|^.(||" `
export BOBJEUSERNAME
fi
restoreUTF8SpecificsForKorean
DEFAULT_REGFILE="$BOBJEDIR"setup/.defaultreg
export DEFAULT_REGFILE
REGFILE="$BOBJEDIR"data/.bobj
export REGFILE
BOE_REGISTRYHOME="$REGFILE/registry"
export BOE_REGISTRYHOME
DEFAULT_ODBCFILE="$BOBJEDIR"defaultodbc.ini
export DEFAULT_ODBCFILE
ODBC_HOME="$odbc"
export ODBC_HOME
the PID file location
PIDDIR="$BOBJEDIR"serverpids
export PIDDIR
SQLRULEDIRECTORY="$LIBDIR"
export SQLRULEDIRECTORY
PATH="$BINDIR:$crpe/xvfb:$PATH"
export PATH
CRPEPATH="$enterprise120/$SOFTWAREPATH/crpe/"
export CRPEPATH
MWHOME="$mw/"
export MWHOME
BOBJEXVFBPATH="$xvfb/"
export BOBJEXVFBPATH
MWUSER_DIRECTORY="$once the crpe is in, we should exit if this file doesn't exist.
Uncomment this to turn off Xvfb security and allow connections from
everyone.
MW_XVFB_AC="1"
export MW_XVFB_AC
Use a seperate .Xauthority file. Comment out this line if you want
to use the user's .Xauthority file for storing the Xvfb authentication
tokens.
registry/"
export MWUSER_DIRECTORY
MWRT_MODE="professional"
export MWRT_MODE
MWREGISTRY=":$MWUSER_DIRECTORY/hklm_$
Mainwin can deadlock unless this is set
Prevents Mainwin from popping up dialogs in some situations, causing a deadlock
variables merged from RAS
XVFB Manager
Environment Variables:
MW_XVFB_EXE = Name of the Xvfb exe.
Default is 'Xvfb'.
MW_XVFB_DAEMON = Name of the XvfbDaemon exe.
Default is 'XvfbDaemon'.
MW_XVFB_DAEMON_PORT = Port number that Xvfb Daemon will listen too.
Default is 5222.
MW_XVFB_DAEMON_HOST = Host on which the XvfbDeamon is running.
Default is Local host.
MW_XVFB_DAEMON_XVFB = Number of Xvfb to run.
Default is '5'.
MW_XVFB_DAEMON_DISPLAY = Starting display number for Xvfb.
Default is '1'.
MW_XVFB_DAEMON_PROFILE = Path to the Security Profile for Xvfb.
Default is 'SecurityProfile'.
MW_XVFB_DAEMON_TRACE = Set to turn on tracing information.
Default is undefined.
MW_XVFB_DAEMON_DIE = Turn off the exit code if no more connections.
Default is undefined.
MW_XVFB_FONT = Locations from which to load font
By this symbol being defined, the checking for a current set display is disabled.
Set to turn on tracing info when defined. Default is undefined.
MW_XVFB_DAEMON_TRACE=defined
export MW_XVFB_DAEMON_TRACE
RAS Home
.bin"
export MWREGISTRY
MWCORE_PRIVATE_DATA="$MWUSER_DIRECTORY/core_data"
export MWCORE_PRIVATE_DATA
if [ -f "$MWHOME"setmwruntime ]; then
. "$MWHOME"setmwruntime
fi
MWNT_OLE_DOCS=true
export MWNT_OLE_DOCS
MWPRINTER_DPI=600
export MWPRINTER_DPI
MWVISUAL_CLASS="TrueColor"
export MWVISUAL_CLASS
if [ "$SOFTWAREPATH" = "hpux_ia64" ]; then
MWTHREAD_STACK="200000"
else
MWTHREAD_STACK="FA000"
fi
export MWTHREAD_STACK
MWFONT_DIR_PATH="$fonts/"
export MWFONT_DIR_PATH
MW_XVFB_DAEMON_FONT="$misc/"
export MW_XVFB_DAEMON_FONT
XAUTHORITY="$xvfb/.Xauthority"
export XAUTHORITY
MWDEBUG_LEVEL=0
export MWDEBUG_LEVEL
MWINVISIBLE_DISPLAY=1
export MWINVISIBLE_DISPLAY
MWNO_SIGCHLD_IGNORE=1
export MWNO_SIGCHLD_IGNORE
MWLOOK=motif
export MWLOOK
MW_XVFB_DAEMON_PROFILE="$BOBJEXVFBPATH/SecurityPolicy"
export MW_XVFB_DAEMON_PROFILE
MW_XVFB_DAEMON_IGNORE_DISPLAY="true"
export MW_XVFB_DAEMON_IGNORE_DISPLAY
if [ "$SOFTWARE" = "HP-UX" ]; then
MW_XVFB_DAEMON_XVFB=10
else
MW_XVFB_DAEMON_XVFB=5
fi
export MW_XVFB_DAEMON_XVFB
MWNO_FILE_LOCKING=true
export MWNO_FILE_LOCKING
MWNO_SIGNAL_CATCHING=true
export MWNO_SIGNAL_CATCHING
RASHOME="$enterprise120/$SOFTWAREPATH/ras/"
export RASHOME
LIBRARYPATH="$LIBDIR:$WCSCOMPONENTDIR:$PLUGINDIST/auth/secEnterprise:$enterprise120/$SOFTWAREPATH/crpe:$:$PLUGINDIST/desktop/CrystalEnterprise.Report:$enterprise120/$SOFTWAREPATH/ras:$
May optionally be set to MALLOCMULTIHEAP=heaps:n[,considersize]
where n is scaled to the number of CPUs (usually 2x).
Setting to MALLOCMULTIHEAP=1 enables system defaults.
setting MALLOCMULTIHEAP to 'considersize' fixes an AIX memory leak and significantly reduces the memory footprint.
env variable to fix the default cpu affinity
env variable to fix dlopen/dlclose behaviour to be more like ELF-based systems
aix thread stack overflow guarding : won't catch if overflow is more than 4k, but better than nothing
aix specific ulimit changes
unset the LANG so that we don't get the localized version of 'unlimited' if the localized system messages are installed.
undo that bug workaround from above
set the aix thread scope to system (1:1)
better core naming for aix 5
Check if memory windows is enabled in the kernal parameters
We will support memory windows, either through the "BOE120_HP_MEMWIN_ID" environment variable,
or through the "BusinessObjectsEnterprise120" memory window key in /etc/services.window
Use memory windows if available on HP-UX.
For both HPUX Itanium and PA-RISC
Reduce the number of arenas from 8 (default) to 1 (min) which solves memory blowup issue.
Enable the thread local cache to compensate.
http://www.docs.hp.com/en/B2355-60130/malloc.3C.html
mysql/lib"
if [ "$SOFTWARE" = "AIX" ]; then
LIBPATH="$LIBRARYPATH:$LIBPATH"
export LIBPATH
if [ x"$MALLOCMULTIHEAP" = x ]; then
CRConfig env variable for DCP
MALLOCMULTIHEAP="considersize"
export MALLOCMULTIHEAP
fi
RT_GRQ=ON
export RT_GRQ
LDR_CNTRL=IGNOREUNLOAD
export LDR_CNTRL
AIXTHREAD_GUARDPAGES=1
export AIXTHREAD_GUARDPAGES
LANGWAS="$LANG"
unset LANG
LC_ALLWAS="$LC_ALL"
unset LC_ALL
ulimit -S -m `ulimit -H -m` # max memory
LANG="$LANGWAS"; export LANG
unset LANGWAS
LC_ALL="$LC_ALLWAS"; export LC_ALL
unset LC_ALLWAS
AIXTHREAD_SCOPE="S"
export AIXTHREAD_SCOPE
Version=`uname -v`
Release=`uname -r`
if [ "$Version" -gt 4 ]; then
CORE_NAMING=ON
export CORE_NAMING
fi
AIXTHREAD_MUTEX_DEBUG=OFF
export AIXTHREAD_MUTEX_DEBUG
AIXTHREAD_COND_DEBUG=OFF
export AIXTHREAD_COND_DEBUG
AIXTHREAD_RWLOCK_DEBUG=OFF
export AIXTHREAD_RWLOCK_DEBUG
elif [ "$SOFTWARE" = "HP-UX" ]; then
if [ "$SOFTWAREPATH" = "hpux_ia64" ]; then
SHLIB_PATH="$LIBRARYPATH:$SHLIB_PATH:$JAVA_HOME/jre/lib/IA64W.0/server"
else
SHLIB_PATH="$LIBRARYPATH:$SHLIB_PATH:$JAVA_HOME/jre/lib/PA_RISC2.0/server"
fi
export SHLIB_PATH
MAX_MEM_WINDOW=`/usr/sbin/kctune | grep max_mem_window | awk '{print $2}'`
if [[ "$MAX_MEM_WINDOW" != "0" ]]; then
if [[ "$BOE120_HP_MEMWIN_ID" = "" && -r "/etc/services.window" && -x "/usr/bin/getmemwindow" ]]; then
BOE120_HP_MEMWIN_ID="`/usr/bin/getmemwindow BusinessObjectsEnterprise120`"
export BOE120_HP_MEMWIN_ID
fi
if [[ -x "/usr/bin/setmemwindow" ]]; then
if [[ "$BOE120_HP_MEMWIN_ID" != "" ]]; then
CE_CMDLINE_PREFIX="/usr/bin/setmemwindow -f -i $BOE120_HP_MEMWIN_ID "
fi
fi
export CE_CMDLINE_PREFIX
fi
export MARENA_OPTS=1:8
export MCACHE_OPTS=100:8:0
elif [ "$SOFTWARE" = "Linux" ]; then
LD_LIBRARY_PATH="$LIBRARYPATH:$perl/lib/5.8.0/i386-linux-thread-multi/CORE:$LD_LIBRARY_PATH"
export LD_LIBRARY_PATH
else
LD_LIBRARY_PATH="$LIBRARYPATH:$LD_LIBRARY_PATH"
export LD_LIBRARY_PATH
fi
CRCONFIGFILE="$java/CRConfig.xml"
if [ -f "$CRCONFIGFILE" ]; then
CRConfig11="$CRCONFIGFILE"
export CRConfig11
fi
if [ -d "$ODBC_HOME/locale" ]; then
set up the odbc symlink to work around:
The DataDirect SQL Server ODBC driver on UNIX will not function properly under a
locale other than "en_US" due to strong dependencies on their locale files.
MYLOCALE=`locale | grep LC_MESSAGES | sed -e 's|LC_MESSAGES="||g' -e 's|"$||g'`
if [ ! -d "$ODBC_HOME/locale/$MYLOCALE" ]; then
ln -s "$ODBC_HOME/locale/en_US" "$ODBC_HOME/locale/$MYLOCALE"
fi
fi
This was originally called TMPDIR, but now MainWin supports MW_TMPDIR, so we export MW_TMPDIR
ADAPT00506764 tracks the original issue with TMPDIR/Essbase Connectivity
MySQL now sets its TMPDIR in mysqlstartup.sh
set the tmp dir locally, if the value is not already set.
if [ x"$MW_TMPDIR" = x ]; then
if [ ! -d "$BOBJEDIR"/tmp ]; then
mkdir -p "$BOBJEDIR"/tmp
fi
MW_TMPDIR="$BOBJEDIR"/tmp
export MW_TMPDIR
fi
Comment this out to turn off custom Solaris memory allocator
if [ "$SOFTWAREPATH" = "solaris_sparc" ]; then
LD_PRELOAD="libhoard.so.1"
export LD_PRELOAD
Need to set up 64-bit specific library path so that 64-bit processes will
preload the 64-bit version of the memory allocator, and not the 32-bit version
LD_LIBRARY_PATH_64="$enterprise120/solaris_sparcv9"
export LD_LIBRARY_PATH_64
fi
setup the mysql env variables
if [ -d "$BOBJEDIR"/mysql ]; then
mysql env variables
MYSQL_UNIX_PORT="$BOBJEDIR"mysql/mysql.sock
export MYSQL_UNIX_PORT
fi
call env.sh from sub-directories (presumably from add-on installs)
for dir in "${BOBJEDIR?}/setup"/*
do
if [ -r "${dir?}/env.sh" ]; then
. "${dir?}/env.sh"
fi
done
fi
if [ X"$SOFTWARE" = "XHP-UX" ]; then
check for existence of u_flag, if it is, turn it back on.
if [ "$U_FLAG" = 1 ]; then
set -u
fi
fi -
ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified in windows server 2008 r2.I made a application in asp.net c#.I am using ODBC connection.When I deployed my application in windows server2008 r2.There
is no Microsoft ODBC driver shown in ODBC Data source administrator.Then I go to the C:\Windows\SysWOW64 and open Odbcad32.exe and add Microsoft ODBC2 driver for Oracle and when I run my application I got following error
ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
I am using follwoing string
<connectionStrings>
<add name="theconnetion" connectionString="DSN=abdb;UID=abc;PWD=xyz"/>
</connectionStrings>
Guide me What I do?Did you add a System DSN or a User DSN? If you added a User DSN from your own login, the asp.net application will not be able to use it unless its application Pool in IIS is configured to run under the same credentials that you used for creating
the DSN. It's better if you add a System DSN.
Also, be careful to ensure that you are using a 64 bit DSN, unless you configure the application to run in 32 bits. If the 64 bit application attempts to use the 32 bit driver you get the same error message "Data source name not found and no default
driver specified". See this KB article:
http://support.microsoft.com/kb/942976/en-us -
How can I find out the date of a movie I am trying to pre-order if the date is not available/showing in the "manage pre-order" section?
Thanks so much for your reply King_Penguin. No, sadly there is not indication of the expected release date on the film, it's no where to be found. I have also tried to look in other places online, but no luck. I guess your latter statement jives more with my situation, that being the studio/rights-holder hasn't feel inclined to provide the date.
-
Hey everyone, So I am trying to get a report onto the server, and in BIDS I kept getting a login screen repeating over and over when I tried to deploy my report, so I tried to upload the file at http://<servername>/Reports This worked, but then trying
to run this report from http://<servername>/Reports did not work either because "An error has occurred during report processing. (rsProcessingAborted) Cannot create a connection to data source 'FTYDataSource'. (rsErrorOpeningConnection) For more information
about this error navigate to the report server on the local server machine, or enable remote errors" Anyways I tried to add a New Data Source (which I would use in the report) at http://<servername>/Reports, type ODBC, with the connection string Dsn=blah_blahblah.
I try to test the connection here and get the error ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified This is really getting old fast, everything I try, a new error comes up. Granted I am new at this,
but this still should not be this troublesome. Does anyone have any ideas on what could FINALLY allow me to just put a report out onto the server?!? THANK YOU in advance for ANY help.Hi,
Please try setting the credentials of the datasource.
1. Double click and open the datasource in your project.
2. Click on the credentials tab, and click on option button 'Use this username and password'
3. Enter the username and password to connect to the datasource
4. Deploy or upload the datasource to the report server and try accessing the reports.
Hope this helps.
Please click "Mark as Answer" if this resolves your problem or "Vote as Helpful" if you find it helpful.
BH -
Hi I have SQL2012 installed on my local machine and have also installed MySQL 5.6.23 installed with a test database.
I also have my SQL connector installed and MYSQL ODBC Driver 3.51.
Which happily connects to the Mysqldb.
The Datasource Name : mySQL conn
TCP/IP Server : localhost and Port :3306
User root
with pwd
On the SQL side I have used the following
EXEC master.dbo.sp_addlinkedserver
@server = N'MYSQLSRV',
@srvproduct=N'mySQL conn',
@provider=N'MSDASQL',
@datasrc=N'mySQL conn'
However when I try to selet using open query
SELECT * FROM OPENQUERY ( [MYSQLSRV], 'SELECT * FROM students' )
it comes back with
OLE DB provider "MSDASQL" for linked server "MYSQLSRV" returned message "[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified".
Msg 7303, Level 16, State 1, Line 1
Cannot initialize the data source object of OLE DB provider "MSDASQL" for linked server "MYSQLSRV".
I cant understand what I have done wrong . Any help in this would be great as Ive hit a bit of a brick wallHi Robert3975,
In addition to other post, please also note the following things.
1. If you use the 32-bit driver on a 64-bit machine, please run the 32bit version of "odbcad32.exe" by running "c:\Windows\SysWOW64\odbcad32.exe"
from Start/Run menu and
create your ODBC DSN. However, for the 64-bit driver, use c:\windows\system32\odbcad32.exe to create your ODBC DSN. For more details, please review this similar
thread.
2. Expand the folder Providers under Linked server directory in SSMS and go to properties of MSDASQL provider and configure it properly as described in this blog:
Creating Linked server to MYSQL from SQL Server.
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support -
Pivot on Query - Date Grouping not available
With the current version of Power Query I've found that the Group feature for dates is not available when you select the Power Query query as the data source for the pivot table.
It's an easy fix to load the query to a worksheet then pivot on the table.James, is this still a problem?
Should this be in the Power Query forum?
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it! -
New Data is not available in reporting after revrse posting
Hello All
I have a cube and data loaded into it.Now i came to know that one request is having wrong data and need to be deleted,without deleting I did reverse posting.Now that particular data(means new data) is not available in reporting.The reporting symbol in request(manage tab) is not available for this request.
Now what should I do,in order to get new data in reporting.
regards
blajisorry i solved it
-
Datas are not available to the query when upload a Infopackage
Hello People,
I Would like to know what can be the reason ..why the datas are not available when we execute an upload from FlatFile to the Cube (this one is the last target one).
Considering tere aren´t any poroblem in may target (Cube)
The system shows us the upload was ok, but the status about the "available datas to the query" was not activated.
Thanks,
Rosana.Hi ,
Please go to T code SE16--> Table RSDDAGGR
Here AggrUID(STARTUID) give not equal to blank, you will get list of all the cubes which has aggregates.
If your cybe is in this list , you need to rollup the data to mae this available in reporting.You can rollupp the data by going into Manage of the cube.
-Vikram -
Display '0' when data is not available in Crosstab
Hi Friends,
I have a simple crosstab, which will show,
Country as a "row header"---only one country is available
Department as a "column"
No.Of employees in "Body" of cross tab.
The table will how much percentage of employees are contributed under each department in one Country. Data is also coming correctly. But if there are no employees or there is no data the crosstab is not showing that row. it is displaying the records which is having data. But I need to show all the departments even there is no data. how can I do this?
Any help would be greately appreciated.Hi Anindita,
By default those two options will be selected. those will work on null values. But in my case there are no null values. I don't have any data for particular departments. eventhough I need to visualize the things by giving a default value, say '0'. for example, the following is the report I need
DeptName | country
Marketing | 10
Finance | 0
Production | 0
packaging | 76
(Here the numbers under country are the count of employees. this is a crosstab report).
I am getting the following report
DeptName | country
Marketing | 10
packaging | 76
I want to show all departments even though the data is not available. Please help me. -
Visual Studio 2012 - Source Not Available After Pressing Pause While Debugging
Hi,
In Visual Studio 2008, when we'd open a dialog in our application (Native C++, 64-bit) and pressed 'Pause', the debugger would automatically go to the location of the dialog in the code and the call stack would show the series of calls to arrive
at the current position.
Now that we've upgraded to Visual Studio 2012, this functionality is lost. When we press 'Pause', a 'Source Not Available' tab will appear. The call stack shows the following:
ntdll.dll!ZwWaitForSingleObject()
KernalBase.dll!WaitForSingleObjectEx()
<several lines of nvoglv64.dll>
kernel32.dll!BaseThreadInitThunk()
ntdll.dll!RtlUserThreadStart()
At first we thought it was a symbol issue since none of the Windows-related dlls had pdbs. None of our workstations are connected to the Internet so I used symchk to download all the required symbols. Despite all of the symbols now being loaded, the
debugger still doesn't show the actual call stack into our code.
Is there a setting somewhere that needs to be set? Or are we out of luck since our machines are never online?
Any thoughts are apprecated.
Thanks.
Visual Studio Premium 2012 (11.0.60610.01 Update 3)Hi,
Welcome to MSDN.
In Visual Studio 2008, when we'd open a dialog in our application (Native C++, 64-bit) and pressed 'Pause', the debugger would automatically go to the location
of the dialog in the code and the call stack would show the series of calls to arrive at the current position.
Now that we've upgraded to Visual Studio 2012, this functionality is lost. When we press 'Pause', a 'Source Not Available' tab will appear. The
call stack shows the following:
ntdll.dll!ZwWaitForSingleObject()
KernalBase.dll!WaitForSingleObjectEx()
<several lines of nvoglv64.dll>
kernel32.dll!BaseThreadInitThunk()
ntdll.dll!RtlUserThreadStart()
According to these words above, do you mean clicking “Break All” as following image?
The error means that our project does not contain source code for the code that we are trying to view, you could refer to
this link for more information.
In order to solve this issue, you could debug it in another machine which can download symbols form Symbol Servers, then copy that
symbols to your machine to test.
You could change the Symbols setting of the Visual Studio of the other machine as following image:
Then copy the symbols in that directory to your machine, and change the Symbols settings to your local directory to test.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Maybe you are looking for
-
8330 curve from us cellular keeps freezing up, on my 2nd blackberry exchange
I cannot find an answer for a fix on this error: Uncaught Exception: Application net_rim_bb_messaging_app(133) is not responding; process terminated. Is this like a family secret? US cellular doesn't have any idea wtf the matter with it is, I haven'
-
A/R Down Payment Invoice with Discount
Hi, I have a design question about the "A/R Down Payment Invoice" functionality in SAP B1 (version 8.81 PL09). Consider the following example: I have a sales order with "total before discount" of 1000 euro. Customer gets 10% discount on this order,
-
Slow imac, how to check status and clean up disc?
slow imac, how to check status and clean up disc?
-
CC app doesn't acknowledge that programs are installed
I have most of the CC apps downloaded and installed, but my Creative Cloud app only thinks that I have Acrobat, Muse, Premiere, Scout, Edge and Indesign and Lightroom 4.1 installed. Premiere's dynamic link to After Effects works, so at least Premiere
-
I've installed the latest update for iPhoto 9.2.2 now what's new in it anyway? I haven't found anything changed...