Funds Management-Replication to ECC-FPO Bdoc Error-Not known in CO

Hi All,
We have configured sap crm funds management integrated with sap crm campaign management.Below is the flow.
a) Create Fund Plan & Release it
b) Create fund for the fund plan above, post some budget, have some attributes like marketing org to determine in campaign & release it.
c) Assign the fund plan & fund to a campaign. Allocate some amount in the planning profile and release the campaign to create fund usages for the budget allocated. These fund usages will have some fund usage items which tracks how much amount each fund has been assigned.
d) Create some purchase requests and settle them in ECC and download the actuals to CRM which will create the appropriate fund usage for the same campaign as in c, capturing the settlement.
e) Run the accrual calculation program to calculate the accrual & then run the accrual posting program to post the accruals to ECC.
After step e, system creates fund postings with "posting transaction" as "accure" and which in turn creates CRM_FM_FPO Bdoc which gets transferred to ECC.
We are getting issues on this BDOC with error as " Object not know in CO". This error is being raised from ECC and when we debugged we found out that the external object id [Fund usage items, in the fund posting transaction or in the items of the BDOC] doesn't exists or not being created in controlling table iaom_ext_obj_inf.
By seeing these, in my opinion we seem to be missing some configuration or some important settings in either in MW or in Controlling in ECC.
Can anyone in the group please let us know what we are missing here ?
Thanks for your time.
Amol

Hi Chandra,
I've the same problem. I've checked the notes and all the settings provided in them are correctly set up in my CRM system.
Can you suggest another kind of solution?
Points if helps,
thanks a lot,
regards,
A.

Similar Messages

  • Fund Management change in ECC 6.0

    Hi,
    Could anybody give me any input regarding the change of FM module from 4.6C to ECC 6?
    I will migrate FM module to ECC 6.0, I might have to reconfigure the module again, but I have a question, how can we activate FM Module in ECC 6? It seems a lot of path is also change..
    Really appreciate if anybody could give me any insight.
    Thanks.
    Rgd,
    Lea

    Hi,
    You can see the release notes in http://help.sap.com. The paths are indeed a little bit different, but the idea is the same.
    Regards,
    Eli

  • Fund Management Error in Billing Document

    Dear all,
    We are upgrading from 4.6 C to ECC 6.0, when i am creating service order and with reference to service order i am creating Service Invoice and save it dosenot transfer to accounting bcoz of FM account assignment is incomplete.
    I checked in Sales order at item level there is one field for Fund Management in Account Assignemnt but it is not active so i cannot enter any field.
    Can any one plz provide some solution for the same.
    Thanks & Regards,
    Pankaj

    You might want to check the account determination analysis in the document, menu Environment ->Analysis -> Account Determination. Usually the accounting information is greyed out because it's supposed to be determined automatically. Obviously, something is incorrect or missing in your system. Unfortunately, I'm not familiar with Fund Management config, you might want to ask in the industry-specific forum.

  • Funds Management Activation

    Hi Experts,
    We are at Version EA -PS - 600 - SAP Enterprise Extension Public Services ,. We have activated EA-PS .Component .
    While in IMG , try to activate   , system  throwing following error message :
    Activate Global Funds Management Functions (PSM-FM) - System ,Function is not possible; application IS-PS is not active
    Message no. FI292
    Diagnosis
    Activating the Funds Management Government functions at client level requires the cross-client activation of the application.
    System Response
    The Funds Management functions are not activated.
    Procedure
    First activate the cross-client IS-PS application by using transaction FIBF under Settings -> Identification -> SAP Applications.
    If we go and see above Path : IS -PS , check box is in NOT CHANGABLE . 
    Please sugges us to activate the same.
    Regards,
    Sujana

    Hi Osvaldo,
    I am facing the same problem.
    I was working on:  Define Planning Layout
    Public Sector Management >> Funds Management Government >> Budget Control System (BCS) >> Budgeting >> Budget Entry >> Planning >> Define Planning Layout
    The msg being:  function is not possible funds management is not active
    As above, I tried to run under SE38: RFFM_ACTIVATE_BCSETS.
    The msg being:
    Transport request "IDSK900213" contains no incomplete structures
    Transport request "IDSK900213" contains no incomplete enhanncements
    Activation of BC Set EA-PS-AKH terminated
    Activation of BC Set EA-PS-IMG terminated
    Activation of BC Set EA-PS-MENU terminated
    Iam using ECC 6 Version. I would be highly obliged if you could suggest me on this.
    Thanking in Advance,
    Raghav.

  • Funds Management and Fiscal Year Variant Change

    Hello !
    We are configuring a new fiscal year variant.
    Currently, the system is on a CALENDAR YEAR FY variant and we are doing the following:
    1. creating a shortened FY of Jan 2009 - Mar 2009
    2. new fiscal year from April 2009 - Mar 2010
    We are trying to change the FY variant for Funds Management via OF15 but receive the error FI674.
    FI674:
    You must not change the fiscal year variant in Cash Budget Management or Funds Management for FM area FM01 if actual data already exists for FM area FM01, or if one or more of the company codes assigned to FM area FM01 is active.
    We have found oss note 719597 which details how to change the FY variant for Cash Budget Mgmt, but it does not apply to Funds management.
    I could find no other supporting documentation.
    Can anyone guide us as to how to deal with this issue?
    Thank=you !

    Hello Patti,
    The point is that it is not possible to change fiscal year variant if actual values exists.
    You are trying to do a change in January. You probably have some postings in 2009 already.
    In the area of PSM-FM there is no note like 719597 of TR-CB.
    Only if no actual values exist, this customizing change would be possible and reasonable.
    If you are doing this setting in your customizing client, you can delete the postings (please DO NOT do it if you are in production) that exist in 2009 and try again.
    SAP do not recommend to change a Fiscal Year Variant that has already been assigned to a company code and has already some postings. This may  create database inconsistencies.
    You can create another Fiscal Year Variant with the information that you want to be customize, and this variant you will be able to assign to a company code. Before you assign this new variant to a company
    code please be sure that none of the information that you already posted in this company code will be affected, this information you may review it with your consultant on-site.
    Also please review/apply note 173636, 202687, 10945, 193713, 123026, 210861 which may happen in your system.
    The fiscal period is related to the posting date via the fiscal year variant. E.g.: I you do a posting on 5.5.2009 it will be posted e.g. in period 5 for fiscal year variant 'A'. This period is not only used in the document header table (BKPF,VBRK,MKPF ...) but also in several balance table (GLT0, KNC1 ...) not only in FI but also in SD, MM, CO .... If in the new  fiscal year variant 'B' this posting date is related to another period e.g. 7 the relation between documents and Periods and balances will be destroyed.
    The problem will be enhanced if the posting-date would be related to diffrent fiscal years.
    In addition several reports in AP/AR and GL reread period-depend data by selecting the posting-date regardless of the period in the document because it's not normal practise to change the fiscal year variant of a company code.
    Some of the involved issues are:
    - FM actuals and commitments may need to be reconstructed if their period- (or even fiscal year-) assignments is changed.
    - FM actuals/commitments can not be reconstructed if fiscal year change activities have already been performed (commitment carry forward, FMJ1, FMJ2).
    - Budgeting data and assigned values may principally be concerned as well, especially if you are working with period values in budgeting.
    The change of fiscal year variant has several implications and should be analyzed very carefully.
    Please check note below for more information:
    Note 672255 Shortened fiscal year / changing fiscal periods
    I hope it helps you and good luck
    Best Regards,
    Vanessa.

  • Global Funds Management - Error on activation

    I am trying to activate Global Funds Management functions.  However, I notice a very strange situation.  After activating it, when I try to post a FI Document, system is saying "Enter a leading ledger".  I had already defined leading and non-leading ledgers in the New GL.  If I deactivate the Global Fund Management functions again, I am able to post the document and the same error message is not appearing.

    Hello,
    Please tell me about your system condition. Is your ecc 6.0 also implement Public Sector component, and the relevant consultant already activated public sector management component in SPRO? Usually de-activate leading ledger 0L cause by activated this component.
    It is the behavior system once Global PSM -FM activated it create new total table FMGLFLEXT, and customer free to use either FAGLEFLEXT or FMGLFLEXT.
    If you want to use/activate again 0L then you can programt via SE38. Run the program FMGL_CHANGE_APPL_IN_LEDGER.
    Leading ledger 0L will come back again.
    Also you can get more information on note 840783

  • System error in Funds Management update

    Dear you,
    Have anyone seen the following when updating FM from FI document:
    "System error:Funds management update (FMRI, CHECK_WE_RE)"
    Any ideas what to do?
    Thanks
    Sonja

    Hi there,
    The update problem occurs both if we try to post with FB50L or if I try to make a transfer of FI postings in FM. This all happens in the new installation where we plan to use new GL and FM.
    This note you gave did not ring a bell for me
    The error message is FI057. But we have not yet found a suitable note.
    Therefore any ideas are still welcomed.

  • Error while Activating Activate Global Funds Management Functions (PSM-FM)

    Hi,
    I am getting the below error while activating Activate Global Funds Management Functions (PSM-FM) in Funds Management.
    Aktivierung des Haushaltsmanagements ist nicht erlaubt
    Message no. ZZ003
    Kindly help me in fix this issue....
    Thanks
    Kishore

    Hi,
    Thanks for your reply. But can you clarify me why we need to delete the row Z_LEAVE in SE11 for FMISPS table. Because here ABAPER is objecting to do this as they feel there may be some impact if we delete this.
    Kindly clarify me
    Thanks
    Kishore

  • Error while settlement of WBS - Funds Management

    Hi,
    We have maintain derivation rule as - WBS to Fund Center. This Fund center is DUMMY because we need not want to control WBS through Funds Management.
    There is always one Cost center in each WBS. while settling this WBS we are getting error as -
    Asset ABC 000127000000 0000: no subnumber with FM assignment DUMMY / /
    Message no. AW851
    ABC - Company code
    000127000000 - asset number
    DUMMY - Fund center
    suggest.

    alex ice wrote:
    Hi, 1 change FC in AS02 to dummy if it applicable.
    > 2 Check note 618269 it applicable.
    > 3 remove FC from asset master data
    Hi Alex, how are u!?
    I've got the same issue than Harsh Vaidya in my system ...
    Ive already read this notes: [618269|https://service.sap.com/sap/support/notes/618269] (no apply to me, because Joint Venture Accounting isn't active), [844262|https://service.sap.com/sap/support/notes/844262], [1473357|https://service.sap.com/sap/support/notes/1473357], [446029|https://service.sap.com/sap/support/notes/446029] and [440396|https://service.sap.com/sap/support/notes/440396]
    All very interesting notes :P
    But... I couldn't find the solution
    I try to TRACE from FMDERIVE too, but when I go to KO88, FMDERIVE's trace doesn't track anything.
    Any help to throw some more light on this thread, would be very useful.
    Thanks a lot!
    Regards from Argentine.

  • After Funds Management activation we got error in travel managment

    Hi All,
      After activating funds management in the system, while creating a travel request we got the following error. Anyone can help on this, for idenifying the problem.
    In the travel request portal we are getting this error :
    " com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException:      No expense type for estimated costs has been defined. Cannot save   , error key: RFC_ERROR_SYSTEM_FAILURE     and          No expense type for estimated costs has been defined. Cannot save   , error key: RFC_ERROR_SYSTEM_FAILURE "
    regards,
    Sabari Prabhu.

    Hi
    I have a question, I udnerstand in (Create one expense type "Estimated Costs") but my question is in using transaction
    When you start using the trip transaction and select a travel request the system send you to the TP04 transaction... now
    with this new function, I have to use the transaction PR05 its right? becouse the TP04 ask the VORS expense type, and sap says to dont delete record
    Please could you tell me with wich transaction you start to create a travel request? I have the same problem of the screen but Im not sure to use the TP04 transaction wit this solution
    Thanks a lot

  • Vendor Master Replication Error  from ECC to SUS : Error in ALE Service

    Dear Experts,
    We are implementing MM SUS (SRM 5.0). As a part of this we need to replicate vendors from ECC to SUS system via XI. We have created a Reduced Message Type Z_CREMAS_SUSMM and had set up the partner profile in WE20 with SUS logical system as destination and specifing the Message Type, and port of the XI system
    We executed the transaction BD14 for replication, it is resulting in error 29 : Error in ALE Service : Entry in Outbound table not found.
    Please provide inputs to overcome this problem
    Thank you,
    Regards,
    Ravi

    Hi,
    Check
    Re: Idoc Error Status "Entry in outbound table not found "
    Looks like some issue with the partner profile set up for the sender or receiver of the EDI message in WE20.
    Set up them again and When these have been set up try reprocessing your IDocs from BD87

  • Fund Management Configurations and user Documents - ECC 6 Version

    Dear all,
    If anybody have the Configuration and user documents pertaining to Fund Management - Government - ECC 6 Version and also the Configurations and user documents pertaining to Budget Control System (BCS), kindly send it to me.
    My E-mail ID is [email protected]
    Regards
    V.Krishnan

    Hi Ezequiel,
    Thanks I have got it. After activating EA_PLM and EA_SCM i am able to get it.
    Thanks a lot.
    Warm regards
    Purnendu
    P.S. - Full reward points for you.

  • Migration Funds Management from 4.7 to ECC.6.0

    Hi,
    The company is migrating the system from v. 4.7 to ECC 6.0. We have the module FM (Funds Management), but we don't know if this module is still active in ECC 6.0.
    Do you have any information about this? And any documentation to do this migration?
    Thanks in advance
    Lluisa

    Hi Lluisa,
    See note[669764|https://service.sap.com/sap/support/notes/669764]:
    as of release R/3 enterprise, Funds Management is delivered as an add-on, i.e. EA-PS.
    Suggest to check all the release notes for PSM including the ones for EA-PS 110,200,500 and 600
    https://websmp206.sap-ag.de/releasenotes
    As you are an Spanish Public Sector customer, I am also including the link to the available documentation, but if you did not have IS-PS nor ISPSe before, I think most of the specific upgrade tools will not be relevant for you. No matter, just have a look for your information:
    https://websmp201.sap-ag.de/sectorpublico
    Servicios para Sector Público España     -> ISPSe Contabilidad Presupuestaria   > ISPSe Support Packages > EAPSe600  
    And, in EA-PS enhancement package 4, there are additional functions for Spanish customers:
    http://help.sap.com/erp2005_ehp_04/helpdata/en/42/fbded750e61febe10000000a422035/frameset.htm
    > Business Functions in SAP ERP  -> Enterprise Business Functions  -> Accounting>Public Sector Management --> Country-Specific Business Functions -->FI-FM Localization Topics for the Spanish Public Sector
    Maybe this is too much information for now..;)
    Kind regards
    Mar

  • Bdoc Error: PRODUCT_SRV while download Customizing Objects from ECC to CRM

    Hello,
    we have tried to download Customizing Objects from ERP to CRM we getting Bdoc error PRODUCT_SRV
    Please any help us in replicating customizing objects ECC6.0 to CRM7.0 Ehp1.
    Bdoc Type:PRODUCT_SRV
    Thanks,
    adi

    Adi,
    Where do you get the erorr? If you're downloding PRODUCT_SRV, then this is not a customizing object. Please check for related inbound and outbound queues in CRM and ECC for errors. Please also check SMW01 and see if you have any BDoc's in error. Give us the full error text of any errors found.
    If you get the problem with customzing objects, please let us the object name(s). Is it just one object or all customizing object?
    Best regards,
    Brian.

  • Funds Management related error while creating Purchase Requisition

    Hi,
    Am working in ECC6.0 system with Funds Management integration. While creating PR am getting  below mentioned error
    "At least one GL account was not derived by the budgetary ledger
    Message no. FI_E034"
    Diagnosis
    You are using the Funds Management system integrated with the budgetary ledger (BL) active for FM area .
    Postings into the budgetary ledger require a GL account for each of the budgetary ledger line items. However,
    in this case, at least one of the line items in the BL interface table does not contain a GL account.
    Use the link below to analyze the table contents before and after the account derivation process.
    Budgetary ledger account derivation trace
    System Response
    The budgetary ledger cannot post this document. The BL document"
    Can some body guide me how to fix this error.
    Thanks in advance

    hi
    which component you are using?
    FORMER BUDGETING OR   BUDGET CONTROLSYSTEM( BCS)
    CHECK YOUR DERIVATION STRATEGY BY USING FMDERIVE.
    CHECK DERIVATION RULE  FOR BUDGETERY LEDGER AND G/L ACCOUNT.
    THANKS & REGARDS
    MALA K VUNDELA

Maybe you are looking for

  • ITunes refuses to open after software update

    So i recently had my macbook updated to OS X 10.7, but in the process all my information was wiped. Luckily i saved it all on my harddrive. When i then tried to re-install all my applications, the only one i had a problem with was iTunes. I installed

  • What is the best way to create illustrator files for frames created in an InDesign layout?

    Is there a quick way to do that or do i need to note the size of each frame in InDesgin and then input that into the dialog in illustrator. It seems like a waste of time. Is there a better way? I am new to InDesgin. What I'd like is a way to automati

  • Best solution for 2+ monitors CS6

    After reading discussions about the flaws of external hardware (matrox, BM, AJA) - or at least the drivers needed, I want to find the right solution for using two computer monitors for my Workspaces and a third (HDMI or HD SDI) output for a 37-inch p

  • Standby with oracle apps

    Dear all, 11.5.10.2 with DB 10.2.0.3 We have configured Physical standby with the above. We need to apply some patches on production , the database will be automatically synchronized with the DR, but how we can handle the applciation tier in DR ? How

  • How to update Muse 7 to recent.......

    How to update Muse 7.4  to the current version........ Is it possible to update a trial.  I was unable to download fro Adobe CC so had to get it from Softpedia.  Version 1.1.6  was available there but it sent to to CC and it doe not work in my Mac...