Funds Management Topic in SAP Help Documentation
Hi,
I cant find Funds Management Topic in SAP Help Documentation, can someone please help me how to locate this topic.
Is funds management same as cash management or both are different.
Hi,
Fund management is a part of Public Sector Management. Here is the link to cash management:
http://help.sap.com/erp2005_ehp_03/helpdata/EN/cf/6fee14414f11d182b10000e829fbfe/frameset.htm
Use Search Help fucntionality to find the required topic in SAP manual.
Regards,
Eli
Similar Messages
-
Issue with creation of custom layouts using SAP Help Documentation
Hi Experts,
My requirement is to create a home custom page layout (using web dynpro) in Composite Environment. The default options available in CE are not useful for me. I set out to make a custom layout using the following this SAP Help Documentation: [ Creating a Web Dynpro Page Layout (SAP Library - Using the Portal as a Frontend)|https://cw.sdn.sap.com/cw/docs/DOC-102846]
I have followed the instructions and followed all the steps, yet I fail to see the application in CE. The custom page layout is not displayed neither in options and is not available any where.
Please let me know if anybody followed these steps and have got any success.
Thanks in advance
SrikantHi
Can somebody let me know if they have implemented a customised solution of creation of page layouts using Web Dynpro - as per the steps suggested by SAP.
Thanks in advance
Srikant -
PSM - Funds Management - Subsequent Posting (transaction FMB0)
Good day to all forumites. I am currently implementing Funds Management at our company (City Power Johannesburg South Africa) an electricity utility. The aim of implementing FM is to activate active availibility control (AVC) for cost center/cost element expenditure. We use cost element/center planning for budgeting purposes and intend to remain so for the future. We are on ECC6 and Funds Management has also been upgraded to the latest version.
I have made the configuration settings as I think best including a full derivation strategy for cost elements/centers to commitment items/funds centers on a one-to-one basis i.e. for every cost element/center combination there is a corresponding entry in table FMFMOACP91000001. This table is created as resut of creating the derivation steps with transactions FMDERIVER.
I have sucessfully transferred all CO Plan Data with transaction FMCYCOPI_CO form CO Planning to FM. My problem arises with the transfer of actual CO postings from CO to FM using transaction FMB0 (subsequent posting). When running a test sample of previously posted documents (in CO) I get error messages which refer to a funds center required in the derivation strategy. The error message isn't very clear to me as I have as stated created a derivation strategy. I am not sure if for e.g. if there is a G/L account as offsetting account in the CO posting document it creates the error message. I have created an additional step in the derivation strategy to link all our gl accounts to one commitment item but this also does not seem to fix the problem.
During the implementaion there have been several instances where notes had to be applied. This was as result of error messages I had encountered during the initial testing after the base configuration had been completed. I am not sure if there could be a program error.
I would appreciate any suggestions/advice on fixing the posting problem.
Best Regards
Mike Olwagen
FICO Functional Analyst
City Power JHBHi Eli thank you very much for your help. By activating the trace I have removed half of my error messages. Most of the error messages relate to secondary cost elements which I have assigned per cost center to a generic commitment item and funds center i.e. many to one as suggested in the SAP Help documentation. What now remains is that the second line of a document for e.g. of an entry where an order for e.g. PM Order is referenced as object in the document line. I tried creating a second derivation step with the cost element and PM order field as source fields and a common funds center and commitment item as destination fields. The pm number range is used as the source field range as the numbers are too many for me to make a field entry with each individual pm order number. The error as described above however remains. I am not sure if I am creating the second derivation step incorrectly as it says on the screen the steps have to be in logical ord
Can you perhaps suggest a way forward in terms of a derivation step whereby the system would recognise an order and derive the generic destination field(s) as explained above.
Regards
Mike Olwagen -
Funds Management-Replication to ECC-FPO Bdoc Error-Not known in CO
Hi All,
We have configured sap crm funds management integrated with sap crm campaign management.Below is the flow.
a) Create Fund Plan & Release it
b) Create fund for the fund plan above, post some budget, have some attributes like marketing org to determine in campaign & release it.
c) Assign the fund plan & fund to a campaign. Allocate some amount in the planning profile and release the campaign to create fund usages for the budget allocated. These fund usages will have some fund usage items which tracks how much amount each fund has been assigned.
d) Create some purchase requests and settle them in ECC and download the actuals to CRM which will create the appropriate fund usage for the same campaign as in c, capturing the settlement.
e) Run the accrual calculation program to calculate the accrual & then run the accrual posting program to post the accruals to ECC.
After step e, system creates fund postings with "posting transaction" as "accure" and which in turn creates CRM_FM_FPO Bdoc which gets transferred to ECC.
We are getting issues on this BDOC with error as " Object not know in CO". This error is being raised from ECC and when we debugged we found out that the external object id [Fund usage items, in the fund posting transaction or in the items of the BDOC] doesn't exists or not being created in controlling table iaom_ext_obj_inf.
By seeing these, in my opinion we seem to be missing some configuration or some important settings in either in MW or in Controlling in ECC.
Can anyone in the group please let us know what we are missing here ?
Thanks for your time.
AmolHi Chandra,
I've the same problem. I've checked the notes and all the settings provided in them are correctly set up in my CRM system.
Can you suggest another kind of solution?
Points if helps,
thanks a lot,
regards,
A. -
Hi
I am implementing funds management (EA-PS) 1.10 in SAP-4.7 version for one of my client. I am using the budget control system(BCS) for this FM functionality.
My client wants to check the detailed list of documents which leads to the consumption amount per fund center and commitment item combination. In other words, whenever we run the FMAVCR01 t-code for any fund center and commitment item combination, how can we find out list of documents which given the consumed amount figure.
Guys, please help me on this.
Thanking you
DebasisDear following are few standard reports with TC, which are used in Fund Management, hope this will help you or give you the idea about reports that you need.
Regards
Javed
INFORMATION REPORTS
FMB_B01 Budget View by Document Type
FMEDDW Display Budget Entry Documents
FMLIDW Display Change Documents
S_KI4_38000034 for Alphabetical List of Commitment Item
S_KI4_38000038 for Alphabetical List Funds Centers
S_KI4_38000039 for Alphabetical List Fund
Totals Records Reports
FMRP_RW_BUDGET for Budget Overview
FMRP_RW_BUDVER for Comparison of Budget Versions
FMRP_RW_BUDCON for Overview of Budget Consumption -
Funds Management - Budget Posting
Hi experts,
I set up a fund management scenario with SAP CRM 6.0, then I'm trying to test it on WEB UI but I'm facing an issue which I'm not able to solve.
The issue regards the Budget Posting functionality, specifically everytime I try to transfer budget from one fund to another the system gives me the following error: "Budget Consumption is 100.00 percent of total available budget (check level FU_FND)".
In the error details the sistem tell me that the budget consumption/total available budget ratio is over the defined tolerance limits. Please adjust your posting amounts.
Of course I tried to do it with the lowest amount but it doesn't work.
Then, I guess I did a mistake during the configuration.
Anyone who can help me working this problem out?
Thanks a lot!
RegardsHi Gabriele,
the msg is raised as per the availability control set up - please check the following customizing:
Customer Relationship Management
Funds Management
Availability Control (AVC)
There please check the AVC profile assigned and the tolerance profiles.
best regards,
johannes -
Hello
if you please Can anyone send to me a document for funds management (under Public Sector Management),i need it urgent
my mail is "[email protected]"Hi Ehab,
Please refer the below link on fund management:
http://www.sap.com/industries/publicsector/pdf/BWP_Financial_Accounting.pdf#search=%22funds%20management%20in%20SAP%22
http://help.sap.com/saphelp_erp2005vp/helpdata/en/32/9bae399c1a6651e10000000a114084/frameset.htm
Additional information about SAP for Public Sector can be found at:
http://www.sap.com/publicsector/
Please assign points as way to say thanks. -
Req:SAP Best practice for the Funds Management
Dear all,
Let me know where I can get the SAP Best practice for the Funds Management . Waiting for your valuable reply.
Regards
ManoharHello Manohar,
You can find documentation in links below:
Industry Solution Master Guide - SAP for Public Sector:
https://websmp105.sap-ag.de/~form/sapnet?_SHORTKEY=00200797470000065911
SAP Best Practices for Public Sector:
http://help.sap.com/ SAP Best Practices -> Industry Packages -> Public
Sector
Online Library for Funds Management:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/41/c62c6d6d84104ab938a
a7eae51db06/frameset.htm
I hope it helps
Best Regards,
Vanessa Barth. -
SAP: Please correct your help documentation
Dear SAP,
I'm writing this issue in this forum, because I don't know where to post this at all ...
In the help documentation to the ep6sp2 are a few 'errors' under the Admin -> System Admin -> System Landscape -> System Landscape Editor -> Editing System Properties -> Editing SAP R/3 System Properties.
You wrote
type
· Type of remote host
· Default value: 3
· Valid values: 1/31/21/E
First, what does 3 mean?
Second, is 3 a valid parameter? It is not listed under the valid values
r3referencesystem
· Property associated with user mapping
· The R/3 user name that is set in the ticket
· Default value: 0; the administrator configures one system and gives the same ticket to other systems; the system that appears in the User Mapping UI
· Valid values: 1/01/1
So your default value is again not to be seen in the valid values =8)
So it would be nice if you can correct this, I think the SAP System properties are an important task in the configuration of the portal....
Regards
RalphHello Ralph,
I think you should open a OSS Message with this topic.
Regards
Gregor -
Sap bw step by step implementation guide for funds management module
Hi Guys,
I am new to sap bw and my client is planning for sap bw implementation for sap funds management module.
please provide any step by step guide and any seggestions would be appreciated.
please provide me the standard info cubes and datasources and objects.
Regards,
MaheshHi Mahesh
Please check if below application components are available, If you dont see them then you can implement it to get the relevant Fund Management Extractors
(IS-PS) (0IS_PU_FM) &(PSM-FM) (0PSM_FM)
You can find the information from help.sap (google it)
Thanks
Abhishek Shanbhogue -
How to release the budget in SAP Funds Management
Hi
How to release the budget in SAP Funds Management. Please let me know the proceedure and the transaction code
TksHi,
The answer depends on if you are using Former Budgeting or BCS.
1) If you are using Former Budgeting:
a. You should use transaction FR51 to enter Release or FR55 to distribute it.
2) If you are using BCS:
a. Within FMBBC transaction you have the option to release the budget, use document type as REL (release).
b. You can activate the automatic release for each budget profile in Customizing of Funds Management Government. To do this, in IMG select Funds Management Government ® Budgeting and Availability Control (Former Budgeting) ® Budget Profiles (Former Budgeting) ® Set Up Budget Profiles.
With the automatic release, the corresponding background releases for expenditures FM account assignments with budget transfers are also posted. Take note that the maximum amount that this automated release can transfer from the sender is the amount that has already been released.
If you do not activate the automated release, the maximum amount that can be transferred from the sender is that which has not yet been released.
c. You can use the mass transaction for release, which is FMMPRELE.
I hope that this answer your inquiry.
Best Regards,
Vanessa Barth. -
SAP ECC6 IDES Activating Funds Managment
Dear Sir,
I have an issue. When i want to activate the Funds Management for the company code 1000 ( AA Derivation and Update control), the system comes up with the message "Read only access" error message no. SV044. This transaction comes up in Display only.
Then how to activate Funds Management for the company code.
Thanks and Regards,
RKHi RK
[https://websmp109.sap-ag.de/support]
See 'Keys&Requests -> SSCR keys'
You should register object R3TR VIEW V_T001_FMACT in your installation number
cheers
Mar -
T-Code of SAP Documentation (SAP Help)
which is the T-Code of SAP Documentation (SAP Help)?
Hi
Ajit this is tcode for the ABAP documentation
ABAP_DOCU_SHOW
plzz reward if i am usefull for any further quiries plzz contact me my mail id [email protected]
plzz dont forget to reward.... -
Please tell me about SAP Fund management
Hi SAP Experts
please tell me about SAP Fund management , which industries its usful ,
Kindly forward me if you have any document for configared
thanks
SiddarthaHi
Funds Management allows management to set budgets for revenues and expenses within your company as well as track these to the area of responsibility.
http://techbays.com/2009/03/14/sap-fi-funds-management-application-menu/
Regards -
Cash&funds management inf&configuration in sap
hi,
pls make me know the cash&funds management inf&configuration in sap.
regards
janaSAP provides standard drill down report for cash flow statement.
T.code: S_ALR_87012273
You can copy the standard report and make the changes in the form as per requirement: T.code: FSI5 for change of form and FSI6 for display.
You can also create cash flow statement to fit yopur requirement in report painter."
Maybe you are looking for
-
I,m sorry but i,v a enough of all these **** problems Microsoft has been on help with helping me fix this problem i,v tried everything to fix it and i do know that i,m not talking to Apple like i said this outlook from Microsoft keeps coming up every
-
Template Installer for BI and EP integration
Dear Friends, I am trying to Configure my BI 7 system to EP. and according to SAP Note - 917950 template installer is standard procedure to configure it. i access this tool through http://<host>:<port>/nwa. when i run the template after entering requ
-
Unable to receive sub-account emails in Windows Ma...
Family members living a distance away have a btinternet main account with a sub account. Both accounts are managed by their Windows Mail and have been operating fine for over 2 years. Last week an error 553 was given. Sub-account emails could be neit
-
Excise Part 2 not to be allowed till QC clears the material
Dear All, I want to put validation like as GR done with Part 1 then it Goes to QC.Till the time they dont clear QC.Part 2 Should not be allowed Regards Amey
-
3D not possible to change color
When I type some text, I convert it to outlines. Then I apply the filter 3D >> extrude and bevel. Then I select the 3D text, select object >> expand appearance. Then I use the wand tool to select the different faces, I then want to change the color o