Funktion for "Create Table" Statement
Dear all,
I am looking for a function to create a "create table"-SQL statement from an existing SAP Dictionary table. Does anybod y know a abap function to do this. With the SQL Statement I want to create the table in an external Database.
Kind Regards
Roman Becker
Hi please enter db_create* in se37 and pick the desired function needed.
here are few Function modules for u.
DB_CREATE_TABLE
DB_CREATE_TABLE_AS_SELECT
DB_CREATE_TABLE_AS_SELECT_S
DB_CREATE_TABLE_S As DB_CREATE_TABLE, also returns the generated statements
Satish
Similar Messages
-
How to specify tablespace for a primary key inde in create table statement
How to specify the tablespace for a primary key index in a create table statement?
Does the following statement is right?
CREATE TABLE 'GPS'||TO_CHAR(SYSDATE+1,'YYYYMMDD')
("ID" NUMBER(10,0) NOT NULL ENABLE,
"IP_ADDRESS" VARCHAR2(32 BYTE),
"EQUIPMENT_ID" VARCHAR2(32 BYTE),
"PACKET_DT" DATE,
"PACKET" VARCHAR2(255 BYTE),
"PACKET_FORMAT" VARCHAR2(32 BYTE),
"SAVED_TIME" DATE DEFAULT CURRENT_TIMESTAMP,
CONSTRAINT "UDP_LOG_PK" PRIMARY KEY ("ID") TABLESPACE "INDEX_DATA"
TABLESPACE "SBM_DATA"; Thank you
Edited by: qkc on 09-Nov-2009 13:42As orafad indicated, you'll have to use the USING INDEX clause from the documentation, i.e.
SQL> ed
Wrote file afiedt.buf
1 CREATE TABLE GPS
2 ("ID" NUMBER(10,0) NOT NULL ENABLE,
3 "IP_ADDRESS" VARCHAR2(32 BYTE),
4 "EQUIPMENT_ID" VARCHAR2(32 BYTE),
5 "PACKET_DT" DATE,
6 "PACKET" VARCHAR2(255 BYTE),
7 "PACKET_FORMAT" VARCHAR2(32 BYTE),
8 "SAVED_TIME" DATE DEFAULT CURRENT_TIMESTAMP,
9 CONSTRAINT "UDP_LOG_PK" PRIMARY KEY ("ID") USING INDEX TABLESP
ACE "USERS"
10 )
11* TABLESPACE "USERS"
SQL> /
Table created.Justin -
Create table statement from DatabaseMetaData
Hi Experts,
Do you know if it's possible to retrieve a create table statement based on a DatabaseMetaData ? (without looping through columnName / Type)
The idea is to get the DatabaseMetaData from one db server, and execute the Create Table statements on a different db server.
One obvious solution would be to loop through each table's column name/type and construct the create table statement manually, but I'd like to know whether this can be automated.
Thanks in advnace,
SidBigger databases provide a way to access most schema information from the database itself. That doesn't mean that the jdbc meta information is sufficient nor the best way to do that.
There are existing tools that allow for migrations as well. Especially if the migration is a one to one mapping. -
i am accessing the local database through JDBC for an application. but i've been getting "not allowed" errors while trying to execute a CREATE TABLE statement in my servlet. It allows all other statements like insert, delete, select etc. i've been using a default table because of the same reason.
so if someone could please throw some light into it.Hi,
Statements like Create which is a Data definition one
will not be entertained by the program while executing.
The reason being the DB cannot allocate the required buffer for crating a table at the time of execution.
So the alterantive is create your DB table manually in ur Db and try other DML statements.
Hope it helps.
Regards,
Guru -
Create table statement inside a procedure.
Hi,
I'm trying to write a procedure creates some tables. The procedure has not arguments. I have written it in this way:
CREATE OR REPLACE PROCEDURE MIGRAZIONE
IS
var varchar2(2000);
BEGIN
--INIZIO tabella dominio spr_klers_bor_borsa
CREATE TABLE SPR_KLERS_BOR_BORSA34
ID VARCHAR2(4 BYTE) NOT NULL,
DESCRIPTION VARCHAR2(80 BYTE)
CREATE UNIQUE INDEX SPR_KLERS_IAZ_BORSA_PK ON SPR_KLERS_BOR_BORSA
(ID)
LOGGING
TABLESPACE FIN_DATA
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
BUFFER_POOL DEFAULT
NOPARALLEL;
ALTER TABLE SPR_KLERS_BOR_BORSA ADD (
CONSTRAINT SPR_KLERS_IAZ_BORSA_PK
PRIMARY KEY
(ID)
USING INDEX
TABLESPACE FIN_DATA
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
--FINE tabella spr_klers_bor_borsa
END MIGRAZIONE;When I compile I receive this message:
PLS-00103: Encountered the symbol "CREATE" when expecting one of the following:
begin case declare exit for goto if loop mod null pragma
raise return select update while with <an identifier>
What does it mean?
How can I solve?
I have tried to change the procedure in this way:
CREATE OR REPLACE PROCEDURE MIGRAZIONE
IS
var varchar2(2000);
BEGIN
--INIZIO tabella dominio spr_klers_bor_borsa
var := 'CREATE TABLE SPR_KLERS_BOR_BORSA
ID VARCHAR2(4 BYTE) NOT NULL,
DESCRIPTION VARCHAR2(80 BYTE)
CREATE UNIQUE INDEX SPR_KLERS_IAZ_BORSA_PK ON SPR_KLERS_BOR_BORSA
(ID)
LOGGING
TABLESPACE FIN_DATA
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
BUFFER_POOL DEFAULT
NOPARALLEL;
ALTER TABLE SPR_KLERS_BOR_BORSA ADD (
CONSTRAINT SPR_KLERS_IAZ_BORSA_PK
PRIMARY KEY
(ID)
USING INDEX
TABLESPACE FIN_DATA
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
execute immediate var;
--FINE tabella spr_klers_bor_borsa
END MIGRAZIONE;And when I compile the version above I receive:
PLS-00103: Encountered the symbol "end-of-file" when expecting one of the following:
begin case declare end exception exit for goto if loop mod
null pragma raise return select update while with
How can I solve?
Thanks all, bye bye.Here you have to user dynamic sql for create table, cerate index etc.
like
CREATE OR REPLACE PROCEDURE MIGRAZIONE
IS
var varchar2(2000);
BEGIN
--INIZIO tabella dominio spr_klers_bor_borsa
var := 'CREATE TABLE SPR_KLERS_BOR_BORSA
ID VARCHAR2(4 BYTE) NOT NULL,
DESCRIPTION VARCHAR2(80 BYTE)
Execute immediate var;
var := 'CREATE UNIQUE INDEX SPR_KLERS_IAZ_BORSA_PK ON SPR_KLERS_BOR_BORSA
(ID)
LOGGING
TABLESPACE FIN_DATA
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
BUFFER_POOL DEFAULT
NOPARALLEL' ;
Execute immediate var;
var := 'ALTER TABLE SPR_KLERS_BOR_BORSA ADD (
CONSTRAINT SPR_KLERS_IAZ_BORSA_PK
PRIMARY KEY
(ID)
USING INDEX
TABLESPACE FIN_DATA
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
execute immediate var;
--FINE tabella spr_klers_bor_borsa
END MIGRAZIONE;YOu can specify all the ddl statements in one execute immediate.
Edited by: s_2 on Oct 17, 2008 6:59 PM -
Hi,
I am facing the following problem:
Database A is running with a great number of tables.
Database B should contain the same tables as A with different data (DB B is empty at the moment).
Therefore I've collected all the 'create table'-statements and packed them into a script.
Because there are several foreign key constraints in DB A (not all deferrable) it seems to be a problem to execute the script.
I have searched the internet how to disable constraints before executing the statements, but I' ve only found solutions for disabling constraints for allready existing tables - not disabling constraint checks will creating.
So, could you please give me a hint what keywords I should use for my further search?
Thanks in advance.steve sastro wrote:
Thanks to all of you.
The point is: I don't really like tools (where I have to click in GUIs). I prefer to see what's going on - just to learn what's happening behind.
As soon as I have tested all of your topics I will reward you with the forum-points. Thx again.
EDIT: Version is 10g
Edited by: steve sastro on 07.12.2009 11:28Being an old-fart command line guy myself, I can appreciate that -- up to a point. But eventually it gets to be simply re-inventing the wheel.
Use exp at the command line. Then use the 'strings' command to examine the output .dmp file. That will give you the education you seek. -
Is it a third party API for creating table in J2ME?
I am a newbie to J2ME and i would like to know that whther is there any third party API for creating table in J2ME beside using Canvas to draw the table? Please help...
its not the "L shape" that holds it better rather the higher GAUSS rating on the older connector.
Apple redesigned the NEW magsafe to be weaker AND of a diff. design with lower neodymium magnetic gauss rating for a reason
people at coffee shops etc were getting their macbooks yanked to the ground when someone tripped over the cord.
The new neodymium is a N35 gauss and the older Lshape was N40 or N45 gauss (too tight)
I know what youre talking about, but Apple redesigned it that way for several good reasons, despite it "coming out easier" on the bed for which ,
as Apple Inc. states, it is "not intended to be used" (nor in laps, couches...etc.) -
Generate Create Table Statements
Hi, the problem is:
My company want to migrate our SQL Server DB to Winwows Azure Server (currently we have our own domain and server), but Azure doesn't support the sentence 'Into' to create temporary tables, so we should replace all 'Into' sentences to corresponding 'Create
Table' statements. Our system have up 1000 SP's with 'Into' sentences and many SP's have a lot of them.
My question: is possible generate a 'Create Table' statement automatically, from a 'select into' sentence? i want to know if Management Studio or external tool have this feature o something similar.
Sorry for my poor english but this is not my native language.
Thanks!Try this one on for size. Run it against your existing DB. It'll give you create scripts you can use on your new DB.
WITH allCols AS (
SELECT s.name as sName, o.name AS oName, c.name AS cName, column_id,
CASE WHEN st.name in ('float','bigint','tinyint','int','smallint','bit','datetime','money','date','datetime2','uniqueidentifier','sysname','geography','geometry') THEN st.name
WHEN st.name in ('numeric','real') THEN st.name + '('+CAST(c.scale AS VARCHAR)+','+CAST(c.precision AS VARCHAR)+')'
WHEN st.name in ('varbinary','varchar','binary','char','nchar','nvarchar') THEN st.name + '(' + CAST(ABS(c.max_length) AS VARCHAR) + ')'
ELSE st.name + ' unknown '
END + ' '+
CASE WHEN c.is_identity = 1 THEN 'IDENTITY ' ELSE '' END +
CASE WHEN c.is_nullable = 0 THEN 'NOT ' ELSE '' END + 'NULL' AS bText,
f.name AS fileGroupName
FROM sys.columns c
INNER JOIN sys.objects o
ON c.object_id = o.object_id
AND o.type = 'U'
INNER JOIN sys.systypes st
ON c.user_type_id = st.xusertype
INNER JOIN sys.schemas s
ON o.schema_id = s.schema_id
INNER JOIN sys.indexes i
ON o.object_id = i.object_id
AND i.index_id = (SELECT MIN(index_id) FROM sys.indexes WHERE object_ID = o.object_id)
INNER JOIN sys.filegroups f
ON i.data_space_id = f.data_space_id
), rCTE AS (
SELECT sName, oName, cName, column_id, CAST(cName + ' ' + bText AS VARCHAR(MAX)) as bText, CAST(cName AS VARCHAR(MAX)) AS colList, fileGroupName
FROM allCols
WHERE column_id = 1
UNION ALL
SELECT r.sName, r.oName, r.cName, c.column_id, CAST(r.bText +', ' + c.cName + ' ' +c.bText AS VARCHAR(MAX)), CAST(r.colList+ ', ' +c.cName AS VARCHAR(MAX)), c.fileGroupName
FROM allCols c
INNER JOIN rCTE r
ON c.oName = r.oName
AND c.column_id - 1 = r.column_id
), allIndx AS (
SELECT 'CREATE '+CASE WHEN is_unique = 1 THEN ' UNIQUE ' ELSE '' END+i.type_desc+' INDEX ['+i.name+'] ON ['+CAST(s.name COLLATE DATABASE_DEFAULT AS NVARCHAR )+'].['+o.name+'] (' as prefix,
CASE WHEN is_included_column = 0 THEN '['+c.name+'] '+CASE WHEN ic.is_descending_key = 1 THEN 'DESC' ELSE 'ASC' END END As cols,
CASE WHEN is_included_column = 1 THEN '['+c.name+']'END As incCols,
') WITH ('+
CASE WHEN is_padded = 0 THEN 'PAD_INDEX = OFF,' ELSE 'PAD_INDEX = ON,' END+
CASE WHEN ignore_dup_key = 0 THEN 'IGNORE_DUP_KEY = OFF,' ELSE 'IGNORE_DUP_KEY = ON,' END+
CASE WHEN allow_row_locks = 0 THEN 'ALLOW_ROW_LOCKS = OFF,' ELSE 'ALLOW_ROW_LOCKS = ON,' END+
CASE WHEN allow_page_locks = 0 THEN 'ALLOW_PAGE_LOCKS = OFF' ELSE 'ALLOW_PAGE_LOCKS = ON' END+
')' as suffix, index_column_id, key_ordinal, f.name as fileGroupName
FROM sys.indexes i
LEFT OUTER JOIN sys.index_columns ic
ON i.object_id = ic.object_id
AND i.index_id = ic.index_id
LEFT OUTER JOIN sys.columns c
ON ic.object_id = c.object_id
AND ic.column_id = c.column_id
INNER JOIN sys.objects o
ON i.object_id = o.object_id
AND o.type = 'U'
AND i.type <> 0
INNER JOIN sys.schemas s
ON o.schema_id = s.schema_id
INNER JOIN sys.filegroups f
ON i.data_space_id = f.data_space_id
), idxrCTE AS (
SELECT r.prefix, CAST(r.cols AS NVARCHAR(MAX)) AS cols, CAST(r.incCols AS NVARCHAR(MAX)) AS incCols, r.suffix, r.index_column_id, r.key_ordinal, fileGroupName
FROM allIndx r
WHERE index_column_id = 1
UNION ALL
SELECT o.prefix, COALESCE(r.cols,'') + COALESCE(', '+o.cols,''), COALESCE(r.incCols+', ','') + o.incCols, o.suffix, o.index_column_id, o.key_ordinal, o.fileGroupName
FROM allIndx o
INNER JOIN idxrCTE r
ON o.prefix = r.prefix
AND o.index_column_id - 1 = r.index_column_id
SELECT 'CREATE TABLE ['+sName+'].[' + oName + '] ('+bText+') ON [' + fileGroupName +']'
FROM rCTE r
WHERE column_id = (SELECT MAX(column_id) FROM rCTE WHERE r.oName = oName)
UNION ALL
SELECT prefix + cols + CASE WHEN incCols IS NOT NULL THEN ') INCLUDE ('+incCols ELSE '' END + suffix+' ON [' + fileGroupName +']'
FROM idxrCTE x
WHERE index_column_id = (SELECT MAX(index_column_id) FROM idxrCTE WHERE x.prefix = prefix)
Don't forget to mark helpful posts, and answers. It helps others to find relevant posts to the same question. -
Caculated column in a Create Table statement
This is my create table statement:
CREATE TABLE DTPartInv
( partinv_partnbr VARCHAR2(10) NOT NULL,
partinv_prodname VARCHAR2(25),
partinv_desc VARCHAR2(25),
partinv_manufact VARCHAR2(25),
partinv_instock INTEGER NOT NULL,
partinv_category VARCHAR2(20),
partinv_purchdate DATE,
partinv_loc VARCHAR2(15),
partinv_price NUMBER(6,2),
partinv_vendor VARCHAR2(20),
partinv_reorder INTEGER NOT NULL,
partinv_serial VARCHAR2(20),
partinv_flag as (case when partinv_instock < partinv_reorder then 'X' else 'O' end), calculated column
CONSTRAINT DTPartInv_partinv_partnbr_pk
PRIMARY KEY (partinv_partnbr)
and these are my Insert into table statements:
INSERT INTO DTPartInv VALUES('XT40010E',Null,'Exhaust Pipe','TMC Inc',2,'Pipes',TO_DATE('11-APR-10','DD-MON-RR'),Null,45.95,'Oracle Auto Parts',1,Null);
INSERT INTO DTPartInv VALUES('CH9260',Null,'Oil Filter','Mechanical Parts',5,'Fuild Filters',TO_DATE('15-Jan-10','DD-MON-RR'),Null,20.00,'Sink Auto P',2,Null);
INSERT INTO DTPartInv VALUES('15W40',Null,'Oil','Sink Oil',20,'Auto Fuilds',TO_DATE('10-Feb-11','DD-MON-RR'),Null,10.00,'Oracle Auto Parts',5,Null,);
INSERT INTO DTPartInv VALUES('C9262',Null,'Fuel Filter','Mechanical Parts',2,'Fuild Filters',TO_DATE('20-Oct-10','DD-MON-RR'),Null,35.95,'Sink Auto Parts',1,Null);
INSERT INTO DTPartInv VALUES('PS7716',Null,'Fuel/Water Separator','Mechanical Parts',4,'Fuild Filters',TO_DATE('09-Dec-10','DD-MON-RR'),Null,50.00,'Sink Auto Parts',1,Null);
INSERT INTO DTPartInv VALUES('800142',Null,'PPI Valve','Beink Pipes Inc',10,'Valves',TO_DATE('01-Jun-11','DD-MON-RR'),Null,20.00,'Oracle Auto Parts',2,Null);
INSERT INTO DTPartInv VALUES('TTS400',Null,'Butt Clamp','Beink Pipes Inc',10,'Valves',TO_DATE('31-Oct-11','DD-MON-RR'),Null,15.95,'Oracle Auto Parts',2,Null);
INSERT INTO DTPartInv VALUES('TBA400',Null,'Lap Clamp','Beink Pipes Inc',10,'Valves',TO_DATE('10-Nov-11','DD-MON-RR'),Null,30.00,'Oracle Auto Parts',2,Null);
INSERT INTO DTPartInv VALUES('SC16650',Null,'Brake pads','CostVB Mechanical',5,'Mechanical Parts',TO_DATE('15-May-11','DD-MON-RR'),Null,60.00,'Adosql Auto Parts',1,Null);
INSERT INTO DTPartInv VALUES('OB46613',Null,'Emergency Door Latch','CostVB Mechanical',3,'Mechanical Parts',TO_DATE('01-Sep-11','DD-MON-RR'),Null,45.95,'Adosql Auto Parts',1,Null);
And this is a sample of the error I'm geeting:
INSERT INTO DTPartInv VALUES('XT40010E',Null,'Exhaust Pipe','TMC Inc',2,'Pipes',TO_DATE('11-APR-10','DD-MON-RR'),Null,45.95,'Oracle Auto Parts',1,Null)
ERROR at line 1:
ORA-00947: not enough values
I need to figure out, what it is that I am missing here. partinv_flag is supposed to be calculated based on partinv_instock and partinv_reorder.You need to name columns:
1 INSERT INTO DTPartInv
2 (partinv_partnbr, partinv_prodname, partinv_desc, partinv_manufact, partinv_instock, partinv_category, partinv_purchdate,
3 partinv_loc, partinv_price, partinv_vendor, partinv_reorder, partinv_serial)
4* VALUES('XT40010E',Null,'Exhaust Pipe','TMC Inc',2,'Pipes',TO_DATE('11-01-10','DD-MM-RR'),Null,45.95,'Oracle Auto Parts',1,Null)
SQL> /
1 row created.
SQL> select * from dtpartinv;
PARTINV_PA PARTINV_PRODNAME PARTINV_DESC
PARTINV_MANUFACT PARTINV_INSTOCK PARTINV_CATEGORY PARTINV_
PARTINV_LOC PARTINV_PRICE PARTINV_VENDOR PARTINV_REORDER
PARTINV_SERIAL P
XT40010E Exhaust Pipe
TMC Inc 2 Pipes 11/01/10
45,95 Oracle Auto Parts 1
OEdited by: P. Forstmann on 21 nov. 2011 18:57
Edited by: P. Forstmann on 21 nov. 2011 19:00 -
Create Create table statement dynamicallly
I am trying to create a SP that return a “Create table “statement dynamically using a table called “Employee” in database. How can I create a dynamic Create Table
statement using sys.table? The create table statement should contains all the columns from Employee table.. i am using SQL server 2008 R2Hi SSAS_5000,
If you don't care about the constraints,dependency on the Table Employee and what you'd like is the table structure, you may use the below statement where the create statement generated from the SP is executed.
SELECT TOP 1 * INTO desiredTable FROM Eemploy;
TRUNCATE TABLE desiredTable
If you have question, feel free to let me know.
Eric Zhang
TechNet Community Support -
SQL Developer Create Table Statement to ERD Visio Diagram
I have the following Create table statement from SQL Developer and I am trying to generate an ERD Diagram using 2003 Visio. I was wondering what I need to do to convert the Create Table to an ERD Diagram Using Visio. Thanks
CREATE TABLE “TT_TEAM”.”HR_REVOKED_SECURITY_ORGS”
“ID” NUMBER NOT NULL ENABLE,
“ACAT_CODE” VARCHAR2(6 BYTE) NOT NULL ENABLE,
“APPR_SEQ_NO” NUMBER(3,0) NOT NULL ENABLE,
“USER_ID” VARCHAR2(30 BYTE) NOT NULL ENABLE,
“ACTION_IND” VARCHAR2(1 BYTE) NOT NULL ENABLE,
“ACTIVITY_DATE” DATE NOT NULL ENABLE,
“COAS_CODE” VARCHAR2(1 BYTE),
“ORGN_CODE” VARCHAR2(6 BYTE),
“POSN” VARCHAR2(6 BYTE) NOT NULL ENABLE,
“MANDATORY_APPR_IND” VARCHAR2(1 BYTE),
“APPR_POSN” VARCHAR2(6 BYTE),
“ORGN_MANAGER” VARCHAR2(6 BYTE) NOT NULL ENABLE;I'm pretty Visio is a non-Oracle product.
In the mean-time, you can easily import a DDL script file and create a relational model/diagram using SQL Developer. Use the Import feature and point to your CREATE TABLE script(s) -
SQLPLUS - Create Table statement
Hello gents/ladies.
I have a few tables that I want to import from a DUMP file I have from MySQL. My quickie question : I've removed all the MySQL specific formatting ( I thought ) like Type=MYISAM and similar, and ended up with a CREATE TABLE statement that looks like this:
CREATE TABLE customerdetails (
custid NUMBER(11) NOT NULL auto_increment,
uid_system varchar2(20) NOT NULL default '',
pwd_system varchar2(20) NOT NULL default '',
lastname varchar2(30) NOT NULL default '',
firstname varchar2(30) NOT NULL default '',
middleinitial char(1) default NULL,
day_phone_countrycode char(3) default NULL,
day_phone_main varchar2(16) default NULL,
evening_phone_countrycode char(3) default NULL,
evening_phone_main varchar2(16) default NULL,
email_primary varchar2(80) NOT NULL default '',
email_secondary varchar2(80) default NULL,
street_adress varchar2(80) NOT NULL default '',
state_prov char(3) NOT NULL default '',
zipcode varchar2(11) NOT NULL default '',
countrycode char(3) NOT NULL default '',
PRIMARY KEY (custid),
UNIQUE KEY UC_custid(custid),
UNIQUE KEY IDX_system_uid(uid_system),
KEY idx_lname_fname_mi(lastname,firstname,middleinitial),
KEY IDX_day_phone(day_phone_countrycode,day_phone_main)
I get this error back from SQLPLUS:
CREATE TABLE CUSTOMERDETAILS (
ERROR in line 1:
ORA-00922: missing or invalid option
I've read through the documentation, and can't see what I'm missing here. Could somebody PLEASE point out the obviously screaming error in this statement?
Thanks!
Kind regards,
Henning Kilset Pedersen
Funcom OSLO ASHi Henning Pedersen,
First of all the your query syntax is wrong.
1. the keyword you used "auto_increment" is not in oracle. you need to take it out from query.
2. you are saying some columns are not null but giving default value as '' (two quotes without any space), this is contradiction, since '' is null, this gives you an error.
Need to take it out.
3. the keyword UNIQUE KEY is wrong you need to use only UNIQUE.
4. Another option is not correct it UNIQUE KEY IDX_system_uid(uid_system),
it must be UNIQUE (uid_system)
5. There is not any keyword as a KEY in oracle. you need to take it out from the query too.
The final query will be like :
CREATE TABLE customerdetails (
custid NUMBER(11) NOT NULL ,
uid_system varchar2(20) NOT NULL ,
pwd_system varchar2(20) NOT NULL ,
lastname varchar2(30) NOT NULL ,
firstname varchar2(30) NOT NULL ,
middleinitial char(1) default NULL,
day_phone_countrycode char(3) default NULL,
day_phone_main varchar2(16) default NULL,
evening_phone_countrycode char(3) default NULL,
evening_phone_main varchar2(16) default NULL,
email_primary varchar2(80) NOT NULL ,
email_secondary varchar2(80) default NULL,
street_adress varchar2(80) NOT NULL ,
state_prov char(3) NOT NULL ,
zipcode varchar2(11) NOT NULL ,
countrycode char(3) NOT NULL ,
PRIMARY KEY (custid),
UNIQUE (custid),
UNIQUE (uid_system)---,
---KEY idx_lname_fname_mi(lastname,firstname,middleinitial),
---KEY IDX_day_phone(day_phone_countrycode,day_phone_main)
This would work fine.
Thanx
Arvind.
null -
ORA-47401: Realm violation for create table on SYS.REGISTRY$HISTORY
Hi i have 10.2.0.4 db with db vault on RHEL4. I am applying jan2010 patch on it. After applying patch when i am trying to recompile views i am facing the below error.(I am executing this after starting up database in upgrade mode)
SQL> @$ORACLE_HOME/cpu/view_recompile/view_recompile_jan2008cpu.sql
BEGIN
ERROR at line 1:
ORA-47401: Realm violation for create table on SYS.REGISTRY$HISTORY
ORA-06512: at line 16
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
With the Partitioning, Oracle Label Security, OLAP, Data Mining,
Oracle Database Vault and Real Application Testing options
[oracle@rac1 view_recompile]$
Plese help me on this.
Regards,
snpPerhaps you are tripping over Bug 6928496. I suspect best bet is to open a SR with Oracle rather than hope for similar occurance within the user community.
-
Reg : class for creating table control
hi everyone,
is there any class for creating table control?my requirement is
created 2 custom containers,one for alv display and other for table control display.
For alv i used cl_gui_alv->set_table_first_display,likewise any class for creaitng table control?????????
pleas find me a solution......
thanks in advance......Hi,
You can use the class CL_TABLECONTROL for creating table control and the method SET_VALUES shall be used to fill values for tha tabcntrl.
Else, you can use the Table Control Wizard to create the tabcntrl easily.
Regards,
Renjith Michael. -
Hi,
I'm using Oracle Db 10g.
I want to take the create table statements of few tables.
Is there any way to get that?
ThanksYou can use DBMS_METADATA package:
select dbms_metadata.get_ddl('TABLE', 'TABLE_NAME') from dual;http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/d_metada.htm#ARPLS026
http://asktom.oracle.com/pls/apex/f?p=100:11:0::::P11_QUESTION_ID:1794096300346327738
Maybe you are looking for
-
Hiding fields in a screen using BADI
Hi Experts I want to invisible certain fields in the screen for certain users and it should be made visible for certain users,the requirement is to do with badi.Can anyone help me regarding this issue. Thanks & Regards Pravitha
-
I have a question regarding PO creation date. When i checked the PO it has a document date let's say 01.01.2011 but when i checked in table ekko-AEDAT field it has 00.00.0000. How come it's like this? And if ever, how to change EKKO-AEDAT field date
-
I updated Itunes to v 10.5. Mistake!!!! Then updated iOS 5 to my iPhone 4 now my iPhone doesn't work as the applications freezes when trying to restore the phone. Same thing happens with my iPad 2, so now I have two pieces of equipment that are co
-
Where can i ask about Lifecam video file that won't work?
i used lifecam studio in order to capture once in a lifetime event. when i wanted to stop, the softwer didn't responded and i was left with 2:30 hours wmv file (1.78gb) that plays for like 1 minute and then stucks! what can i do ?! it's an emergency!
-
Error Message for Integrity Constraint
Hi, I have a table with called TMREF_MEDIATION_DATA_TREATMENT and one called TMREF_UOC_CRITERIA_MAPPING. There is a foreign key constraint and the TMREF_UOC_CRITERIA_MAPPING table has the UID column from the other table in it. When I select delete fo