Funny, got all the 'Publishing Error' messages but websites get published
Hello all.
I have 3 .mac websites using iWeb.
Last night had trouble publishing, because some "navigation bar error", so I 'publish all', still failed. So every site every page on the left panel is in red.
Brought the Domain file to the office to try and publish, still failed. Mounted iDisk and trash everything, then tried 'publish all' again, still getting some error messages, then tried last try 'publish', reported a network error.
All the icons on the left panel is still in red
*But funnily, a check on my websites and all of them have been published!*
*So how am I going to "update" my iWeb/Domain file, because they are all in red, thinking they are not published yet?*
Cheers
I am having the same problem, after weeks of everything being OK. Suddenly, in the last 24 hours I get a variety of messages, including the "Unknown Error" message and one called "Lock Error". Beats me what THAT is.
When I look at the url with Safari, it all seems to be fully updated, but iWeb certainly THINKS there has been an error, and leaves all the pages that have been altered in any way in the familiar red highlight color.
Trying to contact customer support. Could take a while, of course!
Good luck!, Charlie
Message was edited by: Charlie Morgan
Message was edited by: Charlie Morgan
Similar Messages
-
I'm trying to fix the below error message but not get success..
Can someone help me to resolve the following error message..
The error is coming while Update Statistics runs.
Message
Executed as user: \SqlAdmin. ...ssary... [_WA_Sys_00000008_0425A276], update is not necessary... 0 index(es)/statistic(s) have been updated, 6 did not require update. Updating [dbo].[MSreplication_monitordata]
[nc2MSreplication_monitordata], update is not necessary... [nc6MSreplication_monitordata], update is not necessary... 0 index(es)/statistic(s) have been updated, 2 did not require update.
Updating [dbo].[MSsync_states] [ucMSsyncstates], update is not necessary... [_WA_Sys_00000002_0519C6AF], update is not necessary... [_WA_Sys_00000003_0519C6AF], update is not necessary...
0 index(es)/statistic(s) have been updated, 3 did not require update. Updating [dbo].[MSsubscriptions] [ucMSsubscriptions], update is not necessary... [iMSsubscriptions], update is not
necessary... [iMSsubscriptions2], update is not necessary... [_WA_Sys_00000002_060DEAE8], update is not necessary... ... The package execution fa... The step failed.As v.vt says, the message is truncated, and the actual error message appears to have been lost.
Does this happens repeatedly, or was it only the most recent execution that failed?
Erland Sommarskog, SQL Server MVP, [email protected] -
Help me Please.. I can log on to the Apple website to manage my account and all the information is correct, but I get “Your Apple ID has been disabled” when I try to get something from App Store on my iPad3
I'm from poland.
Thx
BalbiContact iTunes Customer Service and request assistance...
Use this Link > Apple Support iTunes Store Contact -
I can log on to the Apple website to manage my account and all the information is correct, but I get “Your Apple ID has been disabled” when I try to get something from App Store on my iPhone.
You need to contact Apple Support, particularly iTunes Store support team. Cheers!
-
I dropped my iPhone 4S in my friends pool. It was fully submerged for about 30 seconds.
We took it out, dried it and put it in rice. After 24 hours I checked the phone. It turns on and runs smoothly. It connects to the computer and syncs perfectly. But after a couple minutes of use I get an overheating error message. But the phone is not hot at all.
Is this the result of the phone being damaged by the water? Is there any way around this? The phone works perfectly fine and isn't overheating at all.
What can I do?Despite the error that I get after a few minutes, the phone does work fine.
But by most peoples definition, the phone isn't working.
I just want to know if anyone has been in my boat and if the overheat message without the phone overheating can correct itself or if it goes away with sufficient drying of the phone.
I know its slim, but I figured I'd ask. -
The "Add-ons Manager" shows Java Platform SE 6 6.0.240.7 is enabled. But when I open certain websites the error message "We have detected that no Java Runtime is installed on your system or you are using an old version..." appears. But I can't see that it has any effect. It just delays the opening while the detection program runs. Something seems contradictory!
Have you tried installing the latest version of Java, there have been 2 updates since your version. You can get the latest version from http://java.com/
-
I removed a movie I had made and now when I try to open final cut pro, all the stuff shows up with the names, etc, but that is it, I don't get anything else, and, final cut does not show at the top of my computer. I have the 27 inch iMac with the intel processor, any help will be appreciated. Larry
Sounds like you may have deleted more than just the movie file. It the FCP application in the Applications folder? if so, try launching from there. If not, you'll neeed to uninstall the app completely using this: http://www.digitalrebellion.com/fcsremover/ then reinstall from the original install discs.
You may want to first try trashing FCP's preferences.
-DH -
unable to get status of backup disk
Greetings cf83,
It seems you are unable to backup on an existing Time Machine backup drive. I have linked to an article that may help you troubleshooting the issue:
OS X: If you can't back up or restore with Time Machine - Apple Support
Thank you for contributing to Apple Support Communities.
Best,
Bobby_D -
Scheduling a Deski report fails with error message: "Failed to get property
Hi,
We have created few Desktop Intelligence report. Now when these report are schedules to be refreshed weekly (on Sunday), it fails with the following error message:
"Failed to Get Property"
Have tried to refresh the reports manually in Full Client too but the report fails there too.
Have checked for the connection information. The servers are up and running.
Have tried to re-create the connection and even tried to re-import and export the Universe.
If we rename the report and save it and export, it works fine. Can not try this workaround as have more that 500 reports.
Please suggest.
regards,Hi Maria,
usually the message "Failed to Get Property" is followed by an item name such as SI_FILE, or SI_VARIABLE, or SI_USE_ORIGINALDS, and so on.
Could you please specify as much information coming from the error message as you can?
Furthermore, is this issue happening with any Desktop Intelligence reports you schedule?
Are the reports using the same Universe?
Which DB are you using?
Regards,
Samanta F. -
I have installed a new version of an APP (mViewer). This app allows me to view security cameras in my office from anywhere. I've tried installing several times, put in all the information, including passwords, but cannot get it to work either on my iPhone or iPad. Is anyone familiar with this app? Thank you.
I don't know this app, but I did look it up in the iTunes Store, thinking I would suggest you could visit the developer's (vendor's) site and seek assistance there.
But when I found the app and went to the vendor's site, I found garbage (nothing useful).
Oh well. -
when syncing with itunes, got error message saying had error and now ipad2 will not do anything other than showing the USB cable with arrow pointing to Itunes on screen. have done the reset and restart, but still get same thing. Ipad does not show up in itunes even though cable plugged in. Have shut down and restarted Windows 7 computer.
I had done all of that to no avail. I did call Apple Tech Support and after he suggested I try a USB port in the rear of the Win 7 computer, things starting working again. I had tried switching the USB port at the front of the machine but that had not helped. Everything is good to go again. thanks for your reply
-
Tried to "Open As" in PS a NEF file I modified in LR. Got the following error message: "Could not complete your request because the file format module cannot parse the file." I can "Open" the file in PS, but then the changes I made in LR (and saved in the associated meta data file with the "Control S" command) are not applied to the opened PS file. HELP!
If you are working with a file you modified in Lightroom, you should go to the Lightroom Photo menu and choose Edit in... and the version of Photoshop you want to open it in.
There a dialog will ask if you want to transfer the LR settings you made to your photo when you open in Photoshop.
Gene -
I have been trying to publish my podcast to iTunes with no success – I keep getting the following error message
We could not complete your iTunes store request. You do not have enough access privileges for this operation. There was an error in the iTunes store. Please try again later.
New to all this and would really appreciate some help.
Thanks in advance
PS: I should say that I have an ITunes account - I have full permissions over the website etc. I am using Powerpress plug in on a wordpress site.My guess would be that you've fallen over a glitch in the Store, in which case all you can do is wait a bit and try again, but it is only a guess. Without being able to look at your feed it's not possible to say whether there might be a problem there.
-
All of a sudden my iTunes stopped working, and I get the following error messages:
1. the program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem
and
2. iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 126).
Now I've checked the forums and followed the advice of uninstalling all Apple applications, rebooting, and reinstalling iTunes.
This is not working. I've tried installing as Administrator but doesn't make any difference at all.
There must be a way to fix this? I'm not a tech geek but I want to avoid having to take my laptop back to factory settings to sort this out.
ThanksClick here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99192) -
I am trying to update my iTunes to 10.5.1 so that I can upgrade my 3GS phone but am getting the following error message when trying to install the itunes: Install step failed: Run pre upgrade script for apple mobile device support. Contact software manufacturer for assistance. I am on a MacBook pro running 10.5.8 OS. Has anyone seen this before and how can I get it resolved.
Thanks for your help in advance....Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
Thanks!
Maybe you are looking for
-
Error while calling a select esb service
javax.resource.ResourceException: RollbackException: Transaction has been marked for rollback: I encounter the above error while executing a synchronous bpel process, that invokes an esb db select service to fetch a value from the db. the details ava
-
Time Machine deleted all the back up files on my TimeCapsule
My computer required an erase and install. I was using 10.5.8. I reinstalled the OS but I did not do a restore from my Time Machine when I first booted it up. However, I wanted to continue to use my time machine back up (basically continue to add fil
-
ISE backup ignoring subdirectory defined in repository
Greetings, I have a repository configured like this: repository Solarwinds_SFTP_SERVER1 url sftp://server1/ISE/ user ISE password hash <password hash> host-key host server1 When I test with show repository, everything works correctly, I see the
-
Formula to identify the parent
Hi, Is there a way to identify the parent a selected dimension ? A formula which might tell me a parent of a selected dimension. Say I have a account from the salaries group - 6XXXX,- severance the formula should tell me the parent i.e. Salaries. I a
-
HT201406 Trouble with iPhone 4S
My on off button doesn't work. When I reboot an iTunes icon and picture of the connector that charges it appears.