FUNTION MODULE /CRYSTAL/MDX_GET_STREAM_INFO"

Hi Ingo,
I opened a separate thread here just in case for your reply on this error.
BO-CRYSTAL REPORT 2008--" FUNTION MODULE /CRYSTAL/MDX_GET_STREAM_INFO"
Thanks

Hi Richard,
you should only open one entry for one problem - not two.
Ingo

Similar Messages

BO-CRYSTAL REPORT 2008--" FUNTION MODULE /CRYSTAL/MDX_GET_STREAM_INFO"

I'm working with BO Edge series , when I execute the query in Crystal Report 2008 , integrating with SAP BI 7.0 im getting the error as follows "Database connector error : 'function module' /CRYSTAL/MDX_GET_STREAM_INFO" not found . if any one come across and solved the above error. Kindly let me proceed with the above issue.

Hi,
take a look here:
Install Part #1
/people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-1-of-4
Install Part #2
/people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-2-of-4
Install Part #3
/people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-3-of-4
Install Part #4
/people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-4-of-4
Crystal Reports connectivity for SAP requires ABAP Transports to be imported to your system.
Ingo

Preview error function module "CRYSTAL/MDX_GET_STREAM_INFO" not found

Hi,
I cannot preview the report I created in Crystal Report 2008. Here is 1st error message "Failed to retrieve data from the database. Then the 2nd error message is "Database connector error: : Function module 'CRYSTAL/MDX_GET_STREAM_INFO' not found. My data source is from MDX query.
Thanks in advance.
Rose

Hi
Contact your basis administrator to ensure
- All the transports have been installed properly.
- Check the version of Crystal Reports and BusinessObjects and the SAP MDX driver version.
For CRXIR2 +BOXIR2 this issue was resolved in CHF15.
Regards
Sourashree

"/CRYSTAL/MDX_GET_STREAM_INFO" not found.

Hi Ingo.
Iu2019ve read many of your articles regarding BO and SAP and they help me a lot.
Now I kindly ask you to help me regarding to the MDX driver.
Iu2019m getting the following error:
Database Connector Error: 'Function module "/CRYSTAL/MDX_GET_STREAM_INFO" not found.'
Iu2019ve installed the required requires ABAP Transports successfully during the installation of the SAP Integration Kit. Iu2019ve also selected under Settings "Use MDX driver with support for Multiple structures" however the error still appears.
Iu2019ve used tcode se37 to search for the above mentioned function and it doesnu2019t exist, the only functions that were installed on the system with ABAP Transports are (/CRYSTAL*):
/CRYSTAL/FLAT                  Business Objects' InfoSet reporting
/CRYSTAL/BUILD_STRING          Convert mbcs itab to utf-8 string
/CRYSTAL/CALL_QUERY            Execute query in dialog mode
/CRYSTAL/CALL_QUERY_BTC_STREAM Call queries in batch mode
/CRYSTAL/GET_BATCH_INFO        Get batch system info
/CRYSTAL/GET_FUNCAREA_CATALOG Get restricted list of Info Sets
/CRYSTAL/GET_FUNCAREA_INFO     Get Info Set meta data
/CRYSTAL/GET_LOGON_LANGUAGE    Retrieve the logon language for the current session
/CRYSTAL/GET_QUERY_CATALOG     Get the restricted list of queries
/CRYSTAL/GET_QUERY_INFO        Get the query field list after performing user group checks.
/CRYSTAL/QUERY_CALL_BATCH      Call queries in batch mode
/CRYSTAL/RECEIVE_INFOSET_DATA Crystal info set and query batch retrieval prototype
/CRYSTAL/RECEIVE_INFOSET_DONE Signal end of data to InfoSet driver
/CRYSTAL/RECEIVE_INFOSET_MDATA Crystal info set and query batch retrieval prototype
/CRYSTAL/UPDATE_LOCATION       Update Crystal Enterprise report datasource location
/CRYSTAL/ODS_REPORT            Business Objects' ODS reporting
/CRYSTAL/GET_ODS_FIELD_INFO    Retrieve field (InfoObject) information for ODS object
/CRYSTAL/ODS_EXECUTE_QUERY     Execute ODS query
/CRYSTAL/SECURITY              Crystal Decisions security functions
/CRYSTAL/GET_USER_LIST         Retrieve filtered list of users belonging to given roles
As you can see there is not any MDX_GET_STREAM_INFO function!!!!
Iu2019m using SAP ECC60 + Crystal Reports 2008 CR Developer Version 12.0.0.683 + SAP Integration Kit.
Can you please be so kind to tell me what Iu2019m doing wrong?! Did I miss something?!
Waiting for your feedback.
Kind Regards
Armando Santos

Hi Ingo.
Iu2019ve already used tcode se37 to search for the above mentioned function and it doesnu2019t exist, the only functions that were installed on the system with ABAP Transports are (/CRYSTAL*):
/CRYSTAL/FLAT Business Objects' InfoSet reporting
/CRYSTAL/BUILD_STRING Convert mbcs itab to utf-8 string
/CRYSTAL/CALL_QUERY Execute query in dialog mode
/CRYSTAL/CALL_QUERY_BTC_STREAM Call queries in batch mode
/CRYSTAL/GET_BATCH_INFO Get batch system info
/CRYSTAL/GET_FUNCAREA_CATALOG Get restricted list of Info Sets
/CRYSTAL/GET_FUNCAREA_INFO Get Info Set meta data
/CRYSTAL/GET_LOGON_LANGUAGE Retrieve the logon language for the current session
/CRYSTAL/GET_QUERY_CATALOG Get the restricted list of queries
/CRYSTAL/GET_QUERY_INFO Get the query field list after performing user group checks.
/CRYSTAL/QUERY_CALL_BATCH Call queries in batch mode
/CRYSTAL/RECEIVE_INFOSET_DATA Crystal info set and query batch retrieval prototype
/CRYSTAL/RECEIVE_INFOSET_DONE Signal end of data to InfoSet driver
/CRYSTAL/RECEIVE_INFOSET_MDATA Crystal info set and query batch retrieval prototype
/CRYSTAL/UPDATE_LOCATION Update Crystal Enterprise report datasource location
/CRYSTAL/ODS_REPORT Business Objects' ODS reporting
/CRYSTAL/GET_ODS_FIELD_INFO Retrieve field (InfoObject) information for ODS object
/CRYSTAL/ODS_EXECUTE_QUERY Execute ODS query
/CRYSTAL/SECURITY Crystal Decisions security functions
/CRYSTAL/GET_USER_LIST Retrieve filtered list of users belonging to given roles
As you can see there is not any MDX_GET_STREAM_INFO function!!!!
Regarding to "If not I would suggest yo try to reimport the Crystal Reports BW MDX connectivity transports" --> I've also repeated this step (Unicode files: * MDX Query Connectivity transport (K900529.r21 and R900529.r21)).
Any suggestion?!
Regards
Armando Santos

Variable size item formulla key funtion module,

I am developing user interface for manual reservation (cutsom development). User wants to calculate quantity of material if he enters size1, size2 and size3. Also he wants that a formula key option to be provided so that he can mention conversion formula. Is there any standard function module for variable size formulla funtion module.
I want to use same logic of variable size item formulla of bom in the above custom template.
Please suggest.

Hi
The function module EVAL_FORMULA and FORMULA_EVALUATION may help you as they all export calculated values as output. Please go to SE37 to click the button 'Function module documentation' to see more information.
Or go to SE80 to check the function group CALC to see more function.
Best Regards
Leon.

Why again funtion modules in ABAP OO ?

if you look at the code inside
cl_gui_frontend_services->gui_upload they use gui_upload function.
there is no difference.
internally the class also uses GUI_UPLOAD ..........
there is conflict like data consistancy problem with function module ..
why again sap is using funtion modules in class method ...
Instead sap can develope method purely by coding in method know ?
Can any body explain what are the advantages and disadvantages ?

Hi,
I think the FM can be used by only one way, with the same calls way( depending for parameters ) and always with the same behavior.
But if you extends the class you can inherits the class's components and insert new attributes.
This is one of the benefits of the OO.
Each SAP's release, many FM are being modified to OO.
Regards,
Marcelo Ramos

How to Update crmd_customer_h TABLE Using CRMV_EVENT Through Funtion Module

Hi
How we can update customer_h table using the CRMV_EVENT Where i implemented logic below in the Funtion Module.
data:     lt_doc_flow          TYPE crmt_doc_flow_wrkt,
          lw_cust_h_com        TYPE crmt_customer_h_com,
          lw_input_field_names TYPE crmt_input_field_names,
          lt_input_field_names TYPE crmt_input_field_names_tab,
          lt_objects_to_save TYPE crmt_object_guid_tab,
          lw_guid TYPE CRMT_OBJECT_GUID.
DATA : lv_process_type TYPE crmt_process_type.
data: wa_doc_flow type CRMT_DOC_FLOW_WRK.
data: wa_customer_h type crmd_customer_h.
* Function module for retriving the Process type.
CALL FUNCTION 'CRM_ORDERADM_H_READ_OW'
    EXPORTING
      iv_orderadm_h_guid     = iv_header_guid
    IMPORTING
      ev_process_type        = lv_process_type
    EXCEPTIONS
      admin_header_not_found = 1
      OTHERS                 = 2.
if lv_process_type eq 'ZG01'.
CALL FUNCTION 'CRM_DOC_FLOW_READ_OB'
EXPORTING
   IV_HEADER_GUID                 = iv_header_guid
IMPORTING
   ET_DOC_FLOW_WRK                = lt_doc_flow.
read table lt_doc_flow with key objtype_a = 'BUS2000116' INTO wa_doc_flow. "gc_object_type-service.
            if sy-subrc eq 0.                    "set flag for service order
            lw_cust_h_com-ref_guid       = wa_doc_flow-objkey_a.
            lw_cust_h_com-ZZTRAIL_FLAG   = 'X'.
             lw_cust_h_com-mode           = 'A'.
            lw_cust_h_com-ref_handle     = '0000000001'.
            lw_guid = wa_doc_flow-objkey_a.
            INSERT lw_guid INTO TABLE lt_objects_to_save.
     endif.
              lw_input_field_names-fieldname = 'REF_GUID'.
            lw_input_field_names-fieldname = 'ZZTRAIL_FLAG'.
          lw_input_field_names-changeable = ' '.
           INSERT lw_input_field_names INTO TABLE lt_input_field_names.
Maintain Customer H
         CALL FUNCTION 'CRM_CUSTOMER_H_MAINTAIN_OW'
              EXPORTING
                is_customer_h_com    = lw_cust_h_com
              CHANGING
                ct_input_field_names = lt_input_field_names
              EXCEPTIONS
                header_change_error = 1
                header_create_error = 2
               error_occurred       = 3.
ENDIF.
*endif.
*Clearing local variables
clear: lv_process_type,
         lw_cust_h_com,
         lw_input_field_names.
*Free internal tables
free: lt_doc_flow,
        lt_input_field_names.

Hi Faisal
I think your not clear with what i am saying anyhow i will again explain you my requirement
As per my requirement
1)in the service order search report i need to add a field called "Has trail order with No Follow up" with values "Yes" & "Blank"
For above Field i added using the structure CRMST_QUERY_SRVO_BTIL and through configuration i am able to display the field in webui as per (Attachement Pic 1)
2)When i search with search criteria as "Has trail order with No Follow up" with "Yes"
Then in result list i need to show the service order those having follow up as trail orders(sales order) only.if for next document trail order having any follow up then those service orders dont want to show in result list.
For above requirement i implemented F.M using CRMV_EVENT & I configured for BUS2000115 And BEFORE_SAVE The Order
The FM Will get trigger when i save the service order and for that service order if create any follow up and try to save the trail order then This FM Will trigger and in this i am doing validations.
3)Add one AET Trail Flag field is added under CUSTOMER_H Table.
4)in the FM I am validating for if the trail order having the preceding document as service order then i need to make flag as "X" For that service order in customer_h
if suppose when i delete trail order from the service order then that flag must need to be "unset" from the CUSTOMER_H.
Why bcoz we are doing above process is do show records in result list based on Flag values
these flag checks are validating in the BADI Which we implemented for search logic.
Please refer below Login for my requirement:-
Proposal to have a custom “flag” field (background at table level,
     crmd_customer_h) linked to service order which gets flagged whenever at
     least one Trial order is created and saved from the Service Order.
The flag value should be cleared when all the trial orders created and
saved as follow up transactions are deleted from the system.
Similarly for Trial Orders will use the same custom “flag” field
     which gets activated when at least one follow up is created and saved from Trial Order.
The flag value should be cleared when all the follow up transactions from
the Trial Order are deleted from the system.
When the above search criteria “Has Trial order with no follow up”
     “is” “Yes” is applied then the logic derives all the service
     orders which satisfy additional search criteria applied in the search and
     for these Service orders checks if the custom flag field is checked to
     derive all Service orders which have Trial order. The custom flag values
     values are derived from crmd_customer_h table in CRM.
4 )Further for all the Trial Orders determined in Step 3
check if the Trial Order has a follow up by checking if the custom flag field
is checked. The custom flag values are derived from crmd_customer_h table in
CRM.
5) If step 4 is not met populate the preceding Service
Orders in the Result list

Funtion Module in accounting document

Hi All,
Can someone tell what function module is called while creating the accounting document and what are its important import and export parameters?
Regards
Vijay

Hi Vijay,
The most important funtion module responsible to creating accounting documentt is RV_ACCOUNTING_DOCUMENT_CREATE . Below are its important import and export parameters:
Import parameters
CASH_SALE_ACCOUNT : contains the cash clearing account, if this is not to be posted to the customer
CPD_ADRESS: must be filled if you are posting to a one-time customer
DOCUMENT_OLD : contains the $000000x number of the billing document, as VBRK-VBELN already has the final value, XVBRP and so on still contain $000000x
INVOICE_HEADER : Contains the billing header VBRK
I_COMP : Control parameter, if only CO is to be posted
I_COMP_CHECK :   Control parameter if only CO is to be posted (check run)
CHECK : Controlling for error messages (issue immediately or in log)
MODE : Change mode ( A = old, B = new)
MODE_TYPES : Scope of change (1=rebate/2=VPRS)
Differences can occur due to the update of cost price conditions or rebate conditions in billing documents that have already been posted. These two fields (MODE and MODE_TYPES) are required to enable the posting of those differences to CO-PA.
RRREL: If this field is set, the billing document contains revenue recognition items
BOKRE : If this field is set, the billing document is rebate-relevant
These two fields (RRREL and BOKRE) are required for the new cancellation function as of Release 4.6A. This is because the new cancellation procedure cannot be implemented for revenue recognition or rebate relevant billing documents.
Export parameters
O_VBRK_RFBSK: This is set if an error has occured in account determination ( characteristic B)
O_KONV_CHANGED: This is set if XKOMV is changed in account determination
Regards
Roop

Inbound funtion module to process PORDCH02 IDOC

Hi,
I am getting a inbound purchase order PORDCH02 IDOC and i need to change the purchse order based on the idoc value , pls let me know the standard inbound purchase order funtion module attached to inbound process code.
Thanks
Ravi

Hi,
The message type and basic idoc type for the processing of purchase orders:
PORDCH PORDCH01 -- For change
PORDCR1 PORDCR101 -- For Create
Regards,
Ginu Litta Raj

Funtion Module to convet Date's month from numeric to words ???

Hi guys,
I have a requirement such that:-
For Date:- 06.07.2007 (DD.MM.YYYY)
i want it to display as 06-July-2007
Is there any funtion module to do that.
Regards
Rahul

Hi,
Please use code as under :
data : date(10),
        text1(26),
        num1(10),
        test_day(15),
        o_date(20),
        idate type sy-datum.
data : Day(2), month(2), Year(4).
data : ODay(2), Omonth(2), OYear(4).
data : Ltext Type T247-LTX.
date = '06.07.2007'.
day = date+0(2).
month = date+3(2).
year = date+6(4).
concatenate year month day into idate.
CALL FUNCTION 'HR_IN_GET_DATE_COMPONENTS'
EXPORTING
    idate                               = idate
IMPORTING
   DAY                                 = oday
   MONTH                               = omonth
   YEAR                                = oyear
   LTEXT                               = ltext.
concatenate oday '-' ltext '-' oyear into o_date.
write : O_date.
Reward points, if helpful,
Sandeep Kaushik

ERROR WHILE ACTIVATING FUNTIONAL MODULE

HI everybody,
i have created one functional module
code is correct
but at last while activating i am getting error like
'REPORT OR PROGRAM STATEMENT MISSING OR PROGRAM TYPE IS
I(INCLUDE).
COULD U PLZ SUGGEST ME HOW TO SOLVE THIS ERROR
REGARDS
HRIDHAYANJILI.

Hello,
Go to the main program of the Funtion module. and do activate. Select all the deactivated programs related to Function group and then press activate.
Regards,
Naimesh

How to get Documentation on Funtion Module

hi Experts,
I want to know where can we find the documentation of a FM like for a badi... you can get it from spro..srm...Business add in... where u can click on documentatio....
But how to get documentation fo Funtion module , for example if want to get docs related to FM "BBP_PD_SC_GETDETAIL" how to get it....
Thanks
sameer

Hi. If you go to SE37 and enter the FM name, then press display, there is a button top right called "Function Module Documentation".
It is not maintained for every function though, if the button is greyed out there is nothing. If there is nothing there I do not know if there is anywhere else to look, apart from SDN of course....
Regards,
Dave.

Funtion Module: SO_NEW_DOCUMENT_ATT_SEND_API1-How to add TO and CC email id

In the Funtion Module: SO_NEW_DOCUMENT_ATT_SEND_API1- How to add TO and CC email ids?
In the TABLE parameter RECEIVERS, there is field RECEIVER where we pass email ids and field COPY which should be 'X'.
But my concern is how will it distinguish that which email ids should be in TO and which should b in CC?
Kindly help. Thanks in advance.
Thanks & Regards,
Anindita Ghosh

Hello Anindita,
Say you need to send mail to 2 receivers and the 1st one is TO and the second is CC.
Just create 2 entries in the internal table of type SOMLRECI1.
wa_receiver-receiver = <email id of TO>
wa_receiver-express = 'X'.
wa_receiver-rec_type = 'U' (if sending to an external internet id - yahoo,gmail etc)
append wa_receiver to it_receiver.
clear wa_receiver.
wa_receiver-receiver = <email id of CC>
wa_receiver-express = 'X'.
wa_receiver-rec_type = 'U' (if sending to an external internet id - yahoo,gmail etc)
wa_receiver-copy = 'X'.
append wa_receiver to it_receiver.
clear wa_receiver.
Hope this helps
Regards
Sachin

User exit available in the funtion module mentioed below.

I have inbound idoc of the idoc type VEHCLE01.i have few new fields and i added as an extended idoc
I need to process this idoc in the inbound side for create and change mode by refering message funtion of the idoc of it msfunction is 1 create and if is 2 change.
for achiving this i am using two funtion module as below in my zfuntion module.
1)DOC_INPUT_VEHICLE_CREATE
2)IDOC_INPUT_VEHICLE_CHANGEMULTI
for processing the custom fields in the idoc i need to take care in some userexit of this funtion module,pls let me know the userexist where i need to take care of the custom field data from the idoc
Thanks
Ravi

Hi Ravi
there are multiple Badi available, u have to check that which one is useful for you.
find the package name in which your function modules are (it is ISAUTO_VLC).
go to se84 ->business add in->definitions.
enter package name in selection screen and analyze available BADi for your purpose.
Thanks
Vishal Kapoor

GUI_Download funtion module problem

HI All,
I am Using GUI_Download funtion module for downloading data from internal table to flat file. But one of the field is having the value ОАО "САН Интербрю Украина"
After downloading data, the letters are being replaced by # in the download.
If any one know please let me as early as possible.
Thanks in advance.....
Satish

Check the sap documentation for the funtion module(Especially for CODE page)
Character Representation for Output
Description
Use parameter CODEPAGE to specify the desired target codepage. If this
    parameter is not set, the codepage of the SAP GUI is used as the target
    codepage.
Value range
4-digit number of the SAP codepage. Function module
    SCP_CODEPAGE_BY_EXTERNAL_NAME returns the SAP codepage number for an
    external character set name such as "iso-8859-1". Function module
    NLS_GET_FRONTEND_CP returns the related non-Unicode frontend codepage
    for a language.
You can specify the desired codepage interactively, if the parameter
    with_encoding of method file_save_dialog is set by
    cl_gui_frontend_services.
SPACE: Codepage of the frontend operating system.
Regards,
Ravi

FUNTION MODULE /CRYSTAL/MDX_GET_STREAM_INFO"

Similar Messages

Maybe you are looking for