Funtional Area issue in KP06

We have customized a planning layout in KP06, where we want to capture Actual cost along with planned figure. Actuals will be in display mode only at the time of making planning.
Since we are also using functional area which is also defined in cost center master we are facing a problem where we are not getting the actual cost in case the document contains functional area either through cost center or cost element master. Only those doumcuments are captured in actual cost column where functional area is blank.
The problem is there only when we are using KP06 (Cost center planning) layout to have the actual cost as well so that user can view the actual cost at the time of putting the planned values. In this layout actual cost is not coming, if the controlling douments contains functional area, even it is appearing in all SAP standard report's.
Any solution in this reard will be of great help
Thanks in advance
Aseem Arora

Check this note 902985
This problem is caused by a program error. However, the error only occurs when the cost-of-sales accounting (and the update of the functional area) is active.
Check also note 431167 which advises that not all transactions can be shown in actual.
In particular, this means that during the course of Primary cost planning only the business transactions COIN (External postings), RKU1, RKU2, RKU3 (Manual repostings), KAZI (Accrual calculation), KOAO (Settlement of primary costs),     KZPI (Overhead rates),   are taken into account

Similar Messages

  • White screen appears instead of the wallpaper after starting up and all the funtions are working properly like the brightness and the vol

    white screen appears instead of the wallpaper after starting up and all the funtions are working properly like the brightness and the vol

    Hello again V.K,
    I'm taking the computer to assistance as suggested. Even tho I'm almost 100% sure that this isn't a hardware issue.
    Here is why I'm not wasting my time on my affirmative. I'm computer science bacharelor, I know about computer architeture and S.O architeture and also I'm computer developer for more than 10 years now. All behaviors presented have no connection with hardware problems. What I'm trying to say is that I'm not just saying things for saying, I have a logic behind what I say.
    For a short example, whenever mouse right click stops working on a specific window/software, if I click on the window top border and drag it around and go back to the window content, the click works again.
    Also, my keyboard and mouse work via usb. Usb is working normally. If I plug a usb memory stick it shows that usb is working as it should be.
    On windows, right button click is also not working inside any software window, but if I click on start button, icons on desktop, anything on windows epxlorer, it works as it should be. Isnt't there bootcamp underneath windows ?
    on top of it, it's a brand new mac, i have it for 5 months.
    All these people that have the same problem, do u think all of them have hardware issues? Do you think Apple would keep releasing new computers with hardware problems and they wont have any information/recall for them? and worst, the problems start in a random date ?
    This is my first mac and all these problems, being hardware or not, makes me lose all confidence on Apple products.
    Davi.

  • How do I get my songs out of the cloud?  Seems like there are issues and won"t let me sync..

    How can I get my songs out of the cloud?  Seems like there are issues, any new purchased songs are not syncing with Ipod 3rd generations.

    Do you have the original installation disc(s) that shipped with your MacBook? You're just going to have to start from scratch - as I doubt that you can recover any files without paying a fortune. Insert the installations disc, reformat your hard drive and then install the OS that came with your computer. Continue updating to 10.6.8 and then redownload and reinstall Mountain Lion again.
    That's really the only way you're going to get your machine up and running again. I would also consider buying an inexpensive external drive to use as a backup in case your brother decides to do something stupid again.
    Clinton

  • Quality inspection before goods are issued

    Dear friends,
    We have got requirement that before Goods are issued all materials shall undergo Quality inspection and then materials are issued.
    How to map it in SAP.
    Please suggest
    Regards
    Canand

    Hi,
       you have not made it clear that you want through QM or in the framework of Inventory management.
    for the material in QM, you need to active QM view for that material and define the quality parameters for the material accepatance or rejection.
    if through inventory management, you can select the stock type Quality inspection at the time of PO or Migo.
    Regards
    Rajesh

  • I tried playing a you tube video, but received a message prompt to download the latest version of Adobe Flash Player. The link to Adobe stated that there are issues with MAC OS X 10.7 and Flash Player 10.3. The new version did not download. Any Suggestion

    I tried playing a you tube video, but received a message prompt to download the latest version of Adobe Flash Player. The link to Adobe stated that there are issues with MAC OS X 10.7 and Flash Player 10.3. The new version did not download. Any Suggestion

    Hi Seattle
    From Adobe site only!
    flashplayer11_b1_install_mac_071311.dmg
    Works fine.
    Cheers Tomi

  • Mostly what are issues we get for production support in hyperion planning project ?

    mostly what are issues we get for production support in hyperion essbase project ?

    When is the interview
    Cheers
    John

  • Mostly what are issues we get for production support in hyperion essbase project ?

    mostly what are issues we get for production support in hyperion essbase project ?

    This seems obviously an interview question, especially since you have asked an identical question in the Planning space: mostly what are issues we get for production support in hyperion planning project ?

  • Re: Funtional area

    Hi there,
    Could any one help me on this Error please!! When am trying to Create the funtional area am getting an error MSG : FMMD_E005. Am not understanding how to create the Funtional area with the T-code. I got strucked on this. It would be appriciatable if anyone's help me on this.
    waiting for your responce.
    Thank you,
    -Niharika.

    Hello Mr.Paul,
    I would like to share you one more problem related to the same screen. When I am using this t.code, I could not get the screen. Instead of the screen, I am getting one ABAP error like below. Can you please guide me how to resolve it ?
    The current ABAP program "SAPLBUSS" had to be terminated because it ha
    come across a statement that unfortunately cannot be executed.
    Thank you
    Subhash

  • Is the Time Capsule wi-fi router compatible with the Nest thermostat? I've read where there are issues with the Nest and Airport Extreme (AE)? Is AE used in the Time Capsule?

    I've read where there are issues with the Nest and Airport Extreme (AE)? Is AE used in the Time Capsule?
    If so, i already have a wi-fi router, so can the Time Capsule simply be used for wireless backup instead of as a router if there is conflict?

    A TC is fundamentally a AE with a sata chip included to drive the hard disk. Some slightly different bios to include disk functions, although most of those are also on the AE. So as a router it is 99.999% identical.
    And yes, if you have another router you can easily bridge the TC and use wireless for backups and internet connection. Once you no longer route through the TC the issues with most NAT problems including port forwarding should disappear.. mostly this is due to all apple routers using NAT-PMP instead of upnp which is the near universal standard for opening ports.. without upnp apple keep their routers more exclusive.

  • I have an Iad2 and ever since ios6-there are issues.I get occasional lock-ups and have to reboot. The WSJ app freezes when running their videos to the end. The only work-around is to stop the video before it's over. Worse than windows me !!!!!

    My Ipad2 worked perfectly before ios6 upgrade. It now freezes occasionally and I have to reboot to get it to work. Also the WSJ app will now freeze if I try and run one of their videos that is imbedded in the article. My only work-around is to stop (press done) before the end of the video or I have to do a total reboot. The problems remind me of Windows ME . Will Apple resolve these issues or become more like Microsoft. Hopefully there will be a restore button in the future like Microsoft was forced to do because a lot of upgrades are just terrible. Am I crazy or are there other people having the same issues with ios6, or could this just be a coincidence and my ipad2 is starting to fail just when ios6 arrives ?

    I know this will not help but, the bluetooth headset I purchased for my wife works great and it pairs with our car and our sound bar in the livingroom (Motorola Droid Razr) 98.72.16.XT912.Verizon.en.US
    However I did not upgrade over the air but from a android web site and placed it on my external sd card. I believe this made the difference in why we had no issues and upgraded functionality has been great.
    Please note when I mention these bluetooth devices I mean the Razr connects with no problems.
    It also had no internet issues and none of the problems others have complained about in other threads.
    unfortunately when you say thousands have these issues I cannot say that is accurate. The hope is when large numbers of owners have updated to the Jelly Bean and are complaining inmase then Motorola will issue a patch to verizon to get out to the affected users.
    Of course now that Google owns Motorola Mobility and has laid off loads of workers it may never issue an os patch.

  • Flash recovery area issue. I can not open the database??

    Hi all
    I am using oracle 11.2.0 .1.0 on windows
    when i tried to start the database I got the following error.
    ORA-03113: end-of-file on communication channel
    I clear out all information in Trace file. I cleared out all operating system level audit trails. then i deleted archivelog files using operating system level delete. still my database is not opening???
    I tried to start this using RMAN but got the same error. now i have deleted the files from flash recovery area how can i let oracle system to know that those are deleted and there is enough space. Rman does not execute crosschek commands at mount state of the database?
    Need solution.
    Regards
    MAlik

    malikdba wrote:
    the last option which ask to delete the files. i already have deleted the files at operating system level. now the issue is how to let the system that the space is free in flash recovery area? rman is not running crosscheck command at mount stage of the target database. What steps should i follow now?
    Thanks
    malik
    Are you saying you are getting an error while trying to crosscheck at mount?  Or you simply don't believe it will work?
    oracle:orcl$ rman target /
    Recovery Manager: Release 11.2.0.2.0 - Production on Thu Jul 11 10:52:48 2013
    Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.
    connected to target database (not started)
    RMAN> startup mount;
    Oracle instance started
    database mounted
    Total System Global Area     839282688 bytes
    Fixed Size                     2231128 bytes
    Variable Size                503317672 bytes
    Database Buffers             331350016 bytes
    Redo Buffers                   2383872 bytes
    RMAN> crosscheck archivelog all;
    using target database control file instead of recovery catalog
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: SID=18 device type=DISK
    specification does not match any archived log in the repository
    RMAN>
    A perfectly normal crosscheck at the mount stage

  • File upload component and text area issue

    Hi guys,
    I have static text, text area and button on the same page. Text area binded to session bean value and all works fine (I can input text into text area and press button to save changes).
    After adding file upload component to the same page I have got a problem - now after page refreshing the non english characters inside text gets trashed.
    Other non english characters - inside static text components remains the same - the problem relates only to text area.
    It looks like file upload component code has an encoding related bug. Is that a known issue?
    And may be somebody have a workaround?
    Thanks.

    Hi Rom@n,
    I did some checking and this issue is currently logged as: 6442528. It is scheduled to be available in the next patch release. I'm sorry I don't have a time frame for the patch since it is still waiting for other fixes.
    Sorry for the inconvience.
    Lark
    Creator Team

  • Return vendor sales area issue

    Hi all,
    I am creating return vendor master in Xk01 in purchase data view i am seleting a return vendor tab, its take me customer default data screen wher i am giving customer account group XXXX and shipping condition as 01  and i save the vendor master its create vendor number in bagroung its create cusomer master number
    How the ssytem is taking sales area to create a customer master where we need to define that config and i have one more issue while saving return vendor itscreate customer but its assiging two sales area  let say zzzz/01/01 and zzzz/01/01
    can any one guide me where is the issue
    Thanks
    Rajesh

    Hi Rajesh ,
    What is return Vendor?
    As per my undetstanding  , when you are doing returns the sales area determined  automatically from customer master?
    Note-Vendor can also customer  OR Customer also  can be   Vendor , here there is link between these two  ,once  you  assign that  vendor in Customer master general data-Control data - you have field  you can assign that vendor code there, the same with vendor  you can also link customer with Vendor in the same assignment in vendor master data
    May be    this assign is done already for that  customer or vendor plz  check.
    Hope it is helpful to you
    Regards
    Venkat

  • PU12 Transaction: Mutilple Payroll Area Issue

    Dear All,
    I am going under very strange issue with PU12 transaction. This transaction runs fine and export payroll data if a person is hired only in one Payroll Area.
    Like, if a employee E123456 is hired under Payroll Area - 99  and if this is still under that payroll area in HR-Infotype 1 THEN PU12 will work fine.
    If employee is transferred to some other payroll area - 01. So this time Infotype 1 will have two record - Initial Hired Payroll 99 (delimited) record and current Payroll Area 01 record.
    When PU12 transaction starts for this employee it only will run for Initial Payroll Area (in this case 99). Whatever the data under Payroll Area 99 time span will only get processed.
    Whatever the data will come under new Payroll Area 01, it will not get processes.
    Is there something missing in configuration side or something to be added explicitly?
    Thanks,
    Roshan
    Edited by: Roshan Gupta on Feb 9, 2011 1:39 PM

    Hi Mahesh,
    Thanks for the reply. But the link gives good information about configuration of PU12. The scenario I have raised, it doesn't help to understand that. But its good reference guide and I already had that. Can you please help me to understand what could be the reason of the mentioned problem.
    Thanks,
    Roshan

  • Two Company Codes and one Controlling  Area  Issue

    Hi,
    Client has company code 1000 and 1001
    Company code 1000 has been assigned to controlling  area 1000,but company code 1001 was not assigned to controlling area.but in last month they have posted FB75 credit memo with profit center.Now when they are trying to post the same it is giving the error saying company code was not assigned to controlling area.
    they are also using document splitting concept.How to solve this issue without assigning profit center.
    why this is giving the error now and why it was accepted before.any idea.
    Thanks
    Sunitha

    HI,
    Can u explain clearly for which company code u have posted document in FB75. If it is 1001 Company code It will not able to take Profit center or any cost object. Since u have not assigned comapny code 1001 to controlling area 1000.
    Please check Correctly.
    Regards,
    Sreekanth

Maybe you are looking for