Further questions regarding F55 VF settings as these relate to functioning of the DVF-L350 Viewfinder

Am still wondering about how to think about VF Menu settings as these relate to a DVF-L350 viewfinder. Two settings which are not greyed out, and which I, therefore, think must have some utility relating to this viewfinder, are the "Color" and "Brightness" settings. In testing to see how changes from the factory-established +/-0 default settings established for each of these two parameters, I am unable to see that any parameter-value change whatsoever causes any change in the viewfinder image. Am hoping to learn from those of you familiar with these settings can explain this. Jon

I also have the DVF-L350 viewfinder but the menus work just fine on my camera. Any adjustments to the Color or Brightness menus results in an obvious change to the picture in the viewfinder. The Contrast menu is grayed out because you need to make that adjustment with the physical kn0b on the viewfinder, but you'll notice that when you turn the kn0b, the menu value changes to reflect the change -- even thought it is still grayed out. Everything about the viewfinder works just as I would expect it to on my camera. And back when I was writing my F55 book I don't recall any camera settings that would disable those menu controls. I wish I could be more help, but at least I can confirm it should work. https://itunes.apple.com/us/book/doug-jensens-guide-to-sony/id892493476?mt=11&ign-mpt=uo=4 .

Similar Messages

He I have a very basic question regarding reporting of invoice lines and related receiver lines

The documentation shows that receiver transaction id and receiver shipment header and line id should be joined to the same columns in AP invoice lines but these columns are not populated. What is the join for Payables and Purchasing 12.0 and beyond. We are on 12.2.4.
Please advise.

Yes, he does not want redirects because it is POF. Also, redirects don't stay in address bar (at the one I created) - once the screen loads you see the same long URL in address bar. He says I should be able to create another public name for the website (made of forms and reports). Maybe I should go with MOD_REWRITE module? I am reading about it now and they say it's more like renaming then redirecting and I think that's more like what my boss is looking for. Key question: if I use MOD_REWRITE to redirect, would the original (long) URL string be displayed once the first screen loads? I am trying to avoid that. I need users to type http://virtualserver/welcome and to STAY that way in address bar.
Thanks.

Questions regarding Optimizing formulas in IP

Dear all,
This weekend I had a look at the webinar on Tips and Tricks for Implementing and Optimizing Formulas in IP.
Im currently working on an IP-implementation and encounter the following when getting more in-depth.
Id appreciate very much if you could comment on the questions below.
1.) I have a question regarding optimization 3 (slide 43) about Conditions:
If the condition is equal to the filter restriction, then the condition can be removed.
I agree fully on this, but have a question on using the Planning Function (PF) in combination with a query as DataProvider.
In my query I have a filter in the Characteristic restriction.
It contains variables on fiscal year, version. These only allow single value entry.
The DataProvider acts as filter for my PF. So Id suppose I dont need a condition for my PF since it is narrowed down on fiscal year and version by my query.
a.) Question: Is that correct?
I just one to make sure that I dont get to many records for my PF as input. How detrimental for performance is it to use conditions anyway?
2.) I read in training BW370 (IP-training) that a PF is executed for the currently set filter (navigational state) in the query and that characteristics that are used in restricted keyfigures are ignored in the filter.
So, if I use version in the restr. keyfig it will be ignored.
Questions:
a.) Does this mean that the PF is executed for all versions in the system or for the versions that are in the filter of the Characteristic Restrictions and not the currently set filter?
b.) Id suppose the dataset for the PF can never be bigger than the initial dataset that is selected by the query, right?
c.) Is the PF executed anaway against navigational state when I use filtering? If have an example where I filter on field customer thus making my dataset smaller, but executing the PF still takes the same amount of time.
d.) And I also encounter that the PF is executed twice. A popup comes up showing messages regarding the execution. After pressing OK, it seems the PF runs again...
3.) If I use variables in my Planning Function I dont want to fill in the parameter VAR_VALUE with a value. I want to use the variable which is ready for input from the selection screen of the query.
So when I run the PF it should use the BI-variable. Its no problem to customize this in the Modeler. But when I go into the frontend the field VAR_VALUE stays empty and needs a value.
Question:
a.) What do I enter here? For parameter VAR_NAME I use the variable name, but what do I use for parameter VAR_VALUE? Also the variable name?
4.) Question regarding optimization 6 (slide 48) about Formulas on MultiProviders:
'If the formula is using data of only one InfoProvider but is defined on a MultiProvider, the the complete formual should be moved to the single base InfoProvider'.
In our case we have three cubes in the MP, two realtime and one normal one. Right now we have one AggrLevel (AL) on op of the MP.
For one formula I can use one cube so it's better to cretae another AL with the formula based on that cube.
For another formula I need the two realtime cubes. This is interesting regarding the optimization statement.
Question:
a.) Can I use the AL on the MP then or is it better to create a new MP with only these two cubes and create an AL on top of that. And than create the formula on the AL based on the MP with the two cubes?
This makes the architecture more complex.
Thanks a lot in advance for your appreciated answers!
Kind regards, Harjan


Marc,
Some additional questions regarding locking.
I encounter that the dataset that is locked depends on the restrictions made in the 'Characteristic Restrictions'-part of the query.
Restrictions in the 'Default Values'-part are not taken into account. In that case all data records of the characteristic are locked.
Q1: Is that correct?
To give an example: Assume you restrict customer on hierarchy node in Default Values. If you want people to plan concurrently this is not possible since all customers are locked then. When customer restriction is moved to Char Restr the system only locks the specific cutomer hier node and people can plan concurrently.
Q2: What about variables use in restricted keyfigures like variable for fy/period? Is only this fy/period locked then?
Q3: We'd like to lock on a navigational attribute. The nav attr is put as a variable in the filter of the Characteristic Restrictions. Does the system then only lock this selection for the nav.attr? Or do I have to change my locking settings in RSPLSE?
Then question regarding locking of data for functions:
Assume you use the BEx Analyzer and use the query as data_provider_filter for your planning function. You use restricted keyfigures with char Version. First column contains amount for version 1 and second column contains amount for version 2.
In the Char Restrictions you've restricted version to values '1' and '2'.
When executing the inputready query version 1 and 2 are locked. (due to the selection in Char Restr)
But when executing the planning function all versions are locked (*)
Q4: True?
Kind regards, Harjan

Question regarding roaming and data usage

I am currently out of my main country of service, and as such I have a question regarding roaming and data usage.
I am told that the airplane mode is sufficient from keeping the phone off from roaming, but does this apply to any background data usage for applications and such?
If the phone is in airplane mode, are all use of the phone including wifi and application use through the wifi outside of all extra charges from roaming?

Ann154 wrote:
If you are getting charged to use the wifi, then it is possible. Otherwise no
Just to elaborate here, Ann154 is referring to access charges for wifi, which is nothing to do with Verizon, so if you are using it in a plane, hotel, an internet cafe etc that charges for Wifi rather than being free . Verizon does not charge you (or indeed know about!) wifi usage, or any other usage that is not on their cellular network (such as using a foreign SIM for example in global phones) So these charges, if any, will not show up on the verizon bill app. Having it in airplane mode prevents all cellular data traffic so you should be fine

Question regarding Request Notification Template - OIM 9.1.0.2

Hi All,
I have a question regarding notification generated when a request is raised. Currently, the body of the notification is referring the requestor who raise the request (the body of email has attributes like <%Requester Info.First Name%>, <%Requester Info.Last Name%>). Its fine if the requestor is raising the request for him/her self. However, if the requestor is raising the request on behalf of another user, then this notification is causing confusions, since its referring the requestor only in its body and not the beneficiary.
Is there a way to include the end beneficiary's details in the body of the notification?
Please help in this regard
Regards
Vinay

Hi Gurus,
Any idea on this?
Regards
Vinay

Few questions regarding Oracle Scorecard and strategy management.

Hi,
I have following questions regarding Oracle Scorecard and strategy management:
1. What are the ways in which i can show status of a KPI, like we have colors and symbols, what are others?
2. can we keep log of KPIs, store them, keep report of feedback/action taken on that?
3. Does Scorecard and strategy management have ability to retain history on feedback and log of
entries i.e. date/time, user name?
4. Does Scorecard and strategy management have ability to use common mathematical formulas e.g. median, average, percentiles. Describe.?
Thanks in advance for your help.

bump.

Question regarding pse 8

When I have multiple pictures up, how do I keep two pictures from merging when I move one of the pictures to the side? I would like to turn this feature off.
Thanks.

I opened 4 photos into Adobe Photoshop Elements 8 and have set the pictures to "float in all windows" so I can easily grab any one of them and move them to compare pictures.What happens is that the picture I am moving fades and suddenly I have two pictures, one on top of the other in one frame. In the bar at the top of the "merged" picture, it shows the file names of two pictures. From that top bar, I can undo the "merge" by grabbing one of the pictures and dragging it to the left or right, and I am back to the two original pictures. I would like to be able to move pictures around without two frames becoming one frame with two pictures layered. Hope that is a better explanation. Thanks. DianeDate: Mon, 29 Oct 2012 12:47:56 -0600
From: [email protected]
To: [email protected]
Subject: Question regarding pse 8
    Re: Question regarding pse 8
    created by hatstead in Photoshop Elements - View the full discussion
I don't understand. Multiple pictures up - what does that mean?2 pictures merging when you move one to the side - how do you make them merge and move to the side?Feature off - when does this feature come on?
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4808688#4808688
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4808688#4808688
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4808688#4808688. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Is anyone from Apple Support reading these questions regarding Numbers for IOS crashing?

Is anyone from Apple Support reading these questions regarding Numbers for IOS crashing?

This is a user – user forum.
Leave Apple feedback here: https://www.apple.com/feedback/numbers_ios.html

Technical question regarding Video Preview options in Seq Settings

I am trying to wrap my head around some of the unique differences between FCP7 and PrP 5.5. What is the function of the Video Preview choices in the Sequence Setting menu? It seems standardized to I Frame Only MPEG with other options depending on what your source footage is. Why would I use this setting as opposed to 1080 (for an AJA sequence made from Prores footage) or P2 (for an Adobe seq built from the same Prores footage) or Red which gives you no options then the one I just mentioned?
In FCP when things were rendered they were used when I would export the sequence. Is PrP 5.5 the same? If I am previewing a 1080 sequence in I Frame Only MPEG, does that mean on output the whole entire sequence and effects need rendering? What is the best work flow when using Adobe or AJA sequences in regard to this Video Preview setting? It is so different from what I am used to I want to make informed choices.

Maximum Bit Depth is only suitable when ingesting 4:2:2 material and exporting with AJA or BM
Oh, man... not again. This is not true, at all. Maximum Bit Depth has nothing to do with 4:2:2 AJA or BlackMagic. And Maximum Bit Depth is not just for use with 10-bit or greater source footage. It can be used with 8-bit material--DV, H.264, MPEG2, anything--to great benefit.
(The following is copied and pasted since I've written it so many times...)
What Maximum Bit Depth (either in the Sequence Settings or in the Export Settings) does is enable Premiere Pro to render and composite in 32-bit floating point color. It has nothing (or at least, little) to do with the source footage, but controls how effects and transformations that shift pixels around are rendered. Any effect in the Effects panel that has a 32-bit badge on it will benefit from Maximum Bit Depth--the expense is greater memory requirements and processing time, but the payoff is a higher degree of color fidelity and precision in the rendered image. Gaussian Blur, for example, is a 32-bit effect that will show a great difference between when it is rendered with MBD on versus when it is off--even if you're rendering/exporting to an 8-bit format, like DV.
From Karl Soule's article on this topic, The Video Road – Understanding Color Processing: 8-bit, 10-bit, 32-bit, and more:
A DV file with a blur and a color corrector exported to DV without the max bit depth flag. We will import the 8-bit DV file, apply the blur to get an 8-bit frame, apply the color corrector to the 8-bit frame to get another 8-bit frame, then write DV at 8-bit.
A DV file with a blur and a color corrector exported to DV with the max bit depth flag. We will import the 8-bit DV file, apply the blur to get an 32-bit frame, apply the color corrector to the 32-bit frame to get another 32-bit frame, then write DV at 8-bit. The color corrector working on the 32-bit blurred frame will be higher quality then the previous example.
A DV file with a blur and a color corrector exported to DPX with the max bit depth flag. We will import the 8-bit DV file, apply the blur to get an 32-bit frame, apply the color corrector to the 32-bit frame to get another 32-bit frame, then write DPX at 10-bit. This will be still higher quality because the final output format supports greater precision.
A DPX file with a blur and a color corrector exported to DPX without the max bit depth flag. We will clamp 10-bit DPX file to 8-bits, apply the blur to get an 8-bit frame, apply the color corrector to the 8-bit frame to get another 8-bit frame, then write 10-bit DPX from 8-bit data.
A DPX file with a blur and a color corrector exported to DPX with the max bit depth flag. We will import the 10-bit DPX file, apply the blur to get an 32-bit frame, apply the color corrector to the 32-bit frame to get another 32-bit frame, then write DPX at 10-bit. This will retain full precision through the whole pipeline.
A title with a gradient and a blur on a 8-bit monitor. This will display in 8-bit, may show banding.
A title with a gradient and a blur on a 10-bit monitor (with hardware acceleration enabled.) This will render the blur in 32-bit, then display at 10-bit. The gradient should be smooth.
What Maximum Bit Depth does is allow Premiere Pro's rendering engine to have more room to run, with a higher degree of precision. It's important to remember that rendering internally is different than exporting--and even when you're "rendering" previews, you're actually exporting, because you're creating composited video files of one sort or another. That's why there is a Maximum Bit Depth checkbox in the Sequence Settings--that affects preview files, not exports. When you're using hardware MPE, you're always operating in MBD--or more specifically, you're rendering in 32-bit linear color. Generally, this is "better," though I've lamented about the negative effects of linear color processing, e.g. annoying opacity differences on dissolves, shaggy alpha channels, etc.
The bottom line is that Maximum Bit Depth allows Premiere Pro to generate better (subjective), more technically accurate (objective) output, regardless of the input and output format.

Questions regarding FM

Deal all ,
I am new to ABAP and I have few bsic questions,hope you will help me in resolving these
1. While creating the function module we have Table and Import parameters ....what is the use of these two,and which is one is good in performance wise to use ?
2. whar are the pre-requisites When we create a RFC function module ...like RFC destinations n all
If I want to pass the data to my portal then what are all the settings required from both the end (SAP and Portal)
If you give me few tips regarding the creation of normal / RFC / Update fm then it will be a great help
Please help

Hi
Shesh
See in the creation of FM
it may need some data to get executed it may be the tables or some variables so u can pass those with the help of these two u can pass variables only through import but not using tables but u can pass tables by using import i think u got me
and send one test mail and u r further quires to my mail
[email protected]
so i can help u over there
plzz reward if u found i am helpfull to u..
dont forget to reward....
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db988735c111d1829f0000e829fbfe/frameset.htm
click the link
Edited by: Sunil Kumar Mutyala on Dec 29, 2007 12:22 PM

Some questions regarding ESB system.

Hi all,
I've used my ESB system for a few months now, so I thought it would be interesting to look at what's going on in my database schema created by my esb system (oraesb). This led to some questions (and raising eyebrows), I hope some of you soa-experts might have an answer.
* Is my system installed properly:
I noticed that the oraesb schema created by running IRCA.zip installs only tables, views, topic queues and 1 procedure (create_queue). However, looking at the sql scripts in ${soaSuite_home}/integration/esb/sql/oracle there are far more stored procedures defined. Is it normal cq. okay that these objects are not installed or is my esb system faulty?
* No constraints or indices:
My system is yet very small, so it is still performing good/fast. I imagine that when the esb system is going further, performance and locking becomes an issue due to lack of indices on foreign key columns and primary/foreign constraints.
* Only small part of schema used:
When browsing through the tables of the oraesb user I notice that only a few tables are filled with data. For example all "Slide Tables" (this is the name given to these group tables in file ${soaSuite_home}/integration/esb/sql/oracle/wfeventc.sql) are empty. Is this normal? What kind of processes should enter data in these tables? What is the use of the "Slide tables"?
* AQ-tables not being used:
My esb system has five aq-queue tables (esb topics), but they are never used! I recall another thread on this forum about these queue tables growing enormous in size. I guess there must be a sort of switch somewhere to switch between jms-queue's and aq-queue's? Can anyone please explain how switch on the aq-queue's or point me to the proper documentation. I must have overlooked this in the documentation.
Kind regards,
Happy new year,
H

When your podcast is accepted you should receive an email telling you this and giving the URL for its page in the iTunes Store. The string of numbers at the end is the ID number.
It usually takes somewhat longer for a new podcast to appear in the search results. Once you can find it by searching on the title, you can get the Store page URL, if you still don't know it, by control-clicking on the podcast image (or where it should be) and choosing 'Copy Podcast URL'.
You may find this page helpful in giving you basic information about podcasting:
http://www.wilmut.org.uk/pc

Questions regarding creation of vendor in different purchase organisation

Hi abap gurus .
i have few questions regarding data transfers .
1) while creating vendor , vendor is specific to company code and vendor can be present in different purchasing organisations within the same company code if the purchasing organisation is present at plant level .my client has vendor in different purchasing org. how the handle the above situatuion .
2) i had few error records while uploading MM01 , how to download error records , i was using lsmw with predefined programmes .
3) For few applications there are no predefined programmes , no i will have to chose either predefined BAPI or IDOCS . which is better to go with . i found that BAPI and IDOCS have same predefined structures , so what is the difference between both of them .

Hi,
1. Create a BDC program with Pur orgn as a Parameter on the selection screen
so run the same BDC program for different Put organisations so that the vendors
are created in different Pur orgns.
2. Check the Action Log in LSMW and see
3.see the doc
BAPI - BAPIs (Business Application Programming Interfaces) are the standard SAP interfaces. They play an important role in the technical integration and in the exchange of business data between SAP components, and between SAP and non-SAP components. BAPIs enable you to integrate these components and are therefore an important part of developing integration scenarios where multiple components are connected to each other, either on a local network or on the Internet.
BAPIs allow integration at the business level, not the technical level. This provides for greater stability of the linkage and independence from the underlying communication technology.
LSMW- No ABAP effort are required for the SAP data migration. However, effort are required to map the data into the structure according to the pre-determined format as specified by the pre-written ABAP upload program of the LSMW.
The Legacy System Migration Workbench (LSMW) is a tool recommended by SAP that you can use to transfer data once only or periodically from legacy systems into an R/3 System.
More and more medium-sized firms are implementing SAP solutions, and many of them have their legacy data in desktop programs. In this case, the data is exported in a format that can be read by PC spreadsheet systems. As a result, the data transfer is mere child's play: Simply enter the field names in the first line of the table, and the LSM Workbench's import routine automatically generates the input file for your conversion program.
The LSM Workbench lets you check the data for migration against the current settings of your customizing. The check is performed after the data migration, but before the update in your database.
So although it was designed for uploading of legacy data it is not restricted to this use.
We use it for mass changes, i.e. uploading new/replacement data and it is great, but there are limits on its functionality, depending on the complexity of the transaction you are trying to replicate.
The SAP transaction code is 'LSMW' for SAP version 4.6x.
Check your procedure using this Links.
BAPI with LSMW
http://esnips.com/doc/ef04c89f-f3a2-473c-beee-6db5bb3dbb0e/LSMW-with-BAPI
For document on using BAPI with LSMW, I suggest you to visit:
http://www.****************/Tutorials/LSMW/BAPIinLSMW/BL1.htm
http://esnips.com/doc/1cd73c19-4263-42a4-9d6f-ac5487b0ebcb/LSMW-with-Idocs.ppt
http://esnips.com/doc/ef04c89f-f3a2-473c-beee-6db5bb3dbb0e/LSMW-with-BAPI.ppt
Reward points for useful Answers
Regards
Anji

Questions regarding PO output in SRM 4.0

Hi All
I have several questions regarding the settings for PO output in SRM 4.0 ( Ext. classic)
Would really appreciate if someone provides me the rationale and business reasons behind some config settings:
I am referring to BBP_PO_ACTION_DEF transaction in IMG
1) What is the difference between Processing when saving document & immediate processing. SHouldn't the PO output be always processed after the PO is changed and saved?
2) In the Determination technology what is the significance of the term ' Transportable conditions'. Why would it be different if the conditions were manual and not transportable?
3) In the Rule type what is the signifcance of Workflow conditions? How workflow controls the output?
4) What is the meaning of ' Action merging' in layman's terms and what do each of the choices like "Max. 1 Unprocessed Action for Each Processing Type" signify.
5) What powers do the 'changeable in dialog' & 'executable in dialog' indicators assign to the user processing the PO. What happens if these indicators are not set.
6) What does ' Archive mode' in processing type signify. Are the PO outputs archived and stored?
Regards
Kedar

Hello,
Have a look at note 564826. It has some information.
As far as I know, processing time 'Immediate Processing' is not allowed. I really don't know the reason.
"Processing Time" should be defined as "Process using Selection Report" when an output should be processed by a report, such as RSPPFPROCESS, for example.
If you set this as "Process when Saving document", then the output will be sent immediately, otherwise you have to process it with transaction BBP_PPF.
I hope I could help you a little.
Kind regards,
Ricardo

Question Regarding MIDI and Sample Accuracy

Hi,
I have 2 questions regarding MIDI.
1. MIDI is moved by ticks. In the arrange window however, you can move a region by samples. When doing this, you can move within values of the ticks (which you can see on your position box that pops up) Now, will this MIDI note actually be played back at that specific sample point, or will it round the event to the closest tick? (example, if I have a MIDI note directly on 1.1.1.1, and I move the REGION in the arrange... will that MIDI note now fall on the sample that I have moved the region to, or will it be rounded to the closest tick?)
2. When making a midi template from an audio region, will the MIDI information land exactly on the sample of the transient, or will it be rounded to the closest tick?
I've looked through the manual, and couldn't find any specific answer to these questions.
Thanks!
Message was edited by: Matthew Usnick

Ok, I've done some experimenting, and here are my results.
I believe those numbers ARE samples. I came to this conclusion by counting (for some reason it starts on 11) and cutting a region to be 33 samples long (so, minus 11, is 22 actual samples). I then went to the Audio Bin window, and chose to view region length as samples. And there it said it: 22 samples. So, you can in fact move MIDI regions by samples!
Second, I wanted to see if the MIDI notes in the region itself would be quantized to the nearest tick. I cut a piece of audio, so it had a 1 sample attack (zoomed in asa far as I could in the sample editor, selected the smallest portion, and faded in, and made the start point, the region start position). I saved the region as a new audio file, and loaded it up in the exs sampler.
I then made a MIDI region, with and triggered the sample on beat 1 (quantized, on the money). I then went into the arrange window, made a fixed cycle length, and bounced the audio. I then moved the MIDI region by one sample to the right. I did this 22 times (which is the number of samples in a tick, at 120, apparently). After bouncing all of these (cycle position remained fixed, only the MIDI region was moving) I imported all the audio into the arrange on new tracks, and YES!!! The sample start was cascaded by a sample each time!
SO.
Not only can you move MIDI regions by sample, but the positions are NOT quantized to Logics ticks!
This is very good news, and glad I worked this out!
(if anyone thinks this sounds wrong, please correct me, but I'm pretty sure I proved it, in my test)
Message was edited by: Matthew Usnick

Question Regarding QoS and Firewalls Rules

Hello experts, I hope a simple question for you today. I am working to elevate our outdated H323 traffic down a VPN tunnel we are only getting 600k throughput on.
Under "Networking --> QOS --> WAN QOS" I have configured the downstream and upstream bandwidth rates using the 85% rule. I have also created a bandwidth profile called VOIP using 128-256kbps with a priority of "High"
Under "Traffic Selector" I have created the profile using the VLAN 100 for the IP phones with the VOIP bandwidth profile.
My question, is this the correct configuration and I'm done? Or do I need to go further and create the same IPv4 rules in the firewall rules giving it a QoS Priority of "Minimize Delay"
Is there a way in SA540 to see the QOS statistics to see if they are working correctly? I appreciate your input as always experts!!

It's about the relevance of the link. Some will post a vague link to the SAP help that adds no value to anyone trying to find the answer to the question, whereas a targeted link to a - possibly difficult to find - page can be very useful.
It's a bit of a subjective thing, example:
A detailed question asks about technical info behind assigning a cost center to an organizational unit in the org chart.
A reply such as:
Check [this link|http://help.sap.com/saphelp_erp60_sp/helpdata/en/0b/dfba3692dc635ce10000009b38f839/frameset.htm].
Is just wasting everyone's time. Unfortunately we see a lot of these, people seem to think it's a quick way of getting cheap points but it just frustrates everyone else.
Asimilar answer can however be very useful if it contains a targeted link that relates directly to the question, e.g.
See the help on [account assignment infotypes|http://help.sap.com/saphelp_erp60_sp/helpdata/en/bb/bdb2b6575911d189240000e8323d3a/frameset.htm].
However a generic link as per my first example as part of a detailed explanation with a comment of "further info can be found over here" is a good post since the purpose of the link it more for convenience or reference info in addition to the answer in the post.
Hope that helps,
Mike

Further questions regarding F55 VF settings as these relate to functioning of the DVF-L350 Viewfinder

Similar Messages

Maybe you are looking for