Further update from ODS to IO attr

Hi All,
I have getting a weird error when doing a full load to mmy info object attr(master data load )+ text sa s well from ODS..
its giving...data for that info object already deleted...I am running a full load...ne idea why it is happening..
thanks in advnace...

Hi Tina!
Could you please tell us the exact class/number of the error message ?
Bye,
Roberto

Similar Messages

My iphone 5 is crashing after updating to iOS 7 . It shows the apple start up screen . Need some further update from apple .

My iphone 5 is crashing after updating to iOS 7 . It shows the apple start up screen . Need some further update from apple . It often happens when I am on a call or browsing the net on chrome . My chrome app is also updated .

See Here for
Unable to Update or Restore
http://support.apple.com/kb/HT1808

Data Update from ODS to Data Target

To update data from ODS to Infocube, I right clicked on ODS and selected update data in targets and then scheduled it. But in the monitor I am getting an error and status remains yellow. The error is:
Error when updating Idocs in Business Information Warehouse
Diagnosis
Receiver of IDoc is its own logical system
How do I remove this error?

Hi
The note contains a setting that you need to make in case of Data mart too.
"If you download data via the MySelf connection, you must check the
ROIDOCPRMS table in the BW system."

Problem with update from ODS to Cube

Hi All,
I had an issue, when i was loading from ODS to Cube everything was fine except one data package failed coz of some object locked( User : myself, though i wasn't running anything else except this), but i check in SM12 no locks exist for that particular time.
apparently the load failed coz of this single package, its a load from ODS to Cube, so no chance of Manual update from PSA.
any suggestion: do i have to repeat that load all over again( sucks !!! it is for 40 mil)
Regards,
Robyn.

Hi Hoggard
Check the Job log fro ur Job in the SM37 and check for that Datapackage is there any thing failed liek
"ARFCSTATE-SYSFAIL" if this is there .. it means its an Deadlock .. please check the ST22 dump...
U can use the PSA...
1) go to the 8ODS infosource and copy the Delta IP
2) check the option in the processsing as Update PSA and the subsequently into the data targets
3) Schedule the IP manually
hope it helps
regards
AK

Error in Data updation From ODS TO CUBE

hello Experts
We are working on BW 3.5
for FI GL line items we are loading the data to ODS and than to Cube.
earlier there was a process chain failure 2 months back so delta were stuck for 2 months now about 10 million records have been uploaded in ODS but when i am tryint to upload these records to CUBE via delta upload its giving Error
Value 'Ã
Â ABC100711396 ' (hex. 'C30DC2A04C4344313030373131333936 ') of characteristic 0REF_DOC_NO c
i would like to know how to correct this and from where this error is coming as the same data is loaded to ODS and there its OK and secondly as there is no PSA bw ODS and Cube Do i need to delete the request and upload again
what if same error appears again should i write a start routine in update rule Between ODS and CUBE for special characters
thanks for replies

Hi,
Goto All Elementary Tests in RSRV
Goto Master data
Select the required test
Select your Infoobject
Execute the test
You will get the result with errors or no errors
If you get errors, then you click "Correct Error" button.
Regrds,
Suman

Data Flow from ODS to Cube

Hi Guys,
Need a clarification!!! Iam running a full update from an ODs to a Cube. Will the data be picked up from ODs Active Table or Change Log Table.??
Thanks
Srinivas

hi,
You should do further update from ODS ONLY after "Activate data in ODS"
This means, the data will be picked from Active table of ODS.
assign points if useful ***
Thanks,
Raj

Loadin Master data Attribute from ODS

Hi experts,
I have a Master data as Infoprovider:
CASE with attributes at1 and at2.
I loading master data.
Another infoArea, I have and ODS ( case, field1, field2) that is loading with DELTA.
After loading the delta, I want to update the AT2 from CASE master data.
Which is the best option to loading an attribute from ODS? FULL? DELTA? What happend if the duplicate key error appears??
I believe that with a DELTA Update from ODS to CASE will not be an error.
thanks a lot!

Hi,
I dont think so there sould be problem in further update from ODS to Attribute.
It would be better to keep the Delta in Further update.
Regards,
Sharayu

Update data from ODS to ODS with infopackage selection

Hi,
I am trying to update data from one ODS to another ODS with selection criteria in InfoPackage which is created manually.For Full load I can give selection criteria in InfoPackage. When I initialize data Selection is greyed out even selections for Full load exists. Please advise me how to give selections for delta loads from ODS to ODS loads.
Thanks in advance.
Ram

Once you started an ODS as destination in FULL mode from a DS you cannot get back.
So if you want to update from ODS to ODS using Change Log but considering only some data records you could create an Update Routine with a Start Routine that DELETES undesired records (e.g. DELETE DATA_PACKAGE WHERE ...) and then start an Init-Delta Loading.
Hope it helps
GFV

How to clear updates from BBM on q10

Can't seem to figure out how to clear updates from BBM messenger. I. Have the Q10 any feedback would be great!
Solved!
Go to Solution.

hranawat9 wrote:
go on updates. press and hold on the update. it will block further updates of that person. and clear the existing updates of that person.
Thank you for pointing this out. Might I rephrase that to, go to updates. press and hold on a update. Tap on "hide all updates" and this would clear the existing updates of that person, and blocks all further updates from that user.
Shoutout and credit to hranawat9 for this.
If my post has helped you, give it a LIKE

Data loads from ODS TO CUBE

Hi,
   i have delta loads comming into the ODS. i do full update from ODS to the cube by date range for material moments no. last time when i loaded the data, it loaded few for the date range. rest did not load and sitting at ODS. this is full load and tried to load again. any suggestions...
sp

Hi Srinivas,
        check your update rules between ODS and cube whether they are mapped properly(check your date range for the cube load).
         Do a Init load and then do the delta load.
hope this will help.

Data tranfer from ods to infocube

Hi Friends,
I have created ODS and infocube, the data was loaded on ods sucessfully , but when tried to transfer the data from ods to infocube, the error comes. the update rules and data flows are shown correctly as in FUFU book.
the errors comes as check the load and after that the infopackage ask to delete the init request in same cube.
can anyone suggest the right way of tranferring the data from ODS to INFOCUBE and the issues to check.
Kind Regards,
Irfankhan

Hi
Recheck whether you have the request Activate data in ods (odsrcactivate data & Activate Data automatically while ods creation & odsmanageRequest tab -- request -- Activate)
If the Data is there in Active Data table then try to update the same with Update Rules.
While Info Package from ods--Cube -- the Info Package Selection should be Delta ( Init is already there in your cube as I have seen the error message you mentioned)
the update From ods to Cube
Via Info Package -- Data Target Tab -- Schedule it with options Delta --
Info Package -- Monitor -- Update Manually (Wheel)
Adding it in Process chain
Hope it helps and clear

Load from ODS to Infoobject

How do we load data from ODs to infoobject??

Hi,
In RSA1 (Modelling) , when you right click under your infoarea you can see the option "Insert characteristic as a data target".. Choose ur characteristic which you u want to update from ODS..
Right click on the ods - Generate export data source , now you will find the infosource with 8ODS.. Create a update rule for that characteristics by giving ODS name..
Now you can create infopackage and schedule the data from ODS to infoobject.
Hope it helps.
Regards,
Siva.

Update data targets from ODS

Hi Friends,
I have question regarding how to update data further from ODS.
I have ODS1 and ODS2.
ODS1 is having deltas updated from ODSA.
ODS2 is a new ODS and now needs to be updated from ODSA.
I have reviewed the help already.
http://help.sap.com/saphelp_nw04/helpdata/en/2c/749bbb595511d4b2bc0050da4c74dc/content.htm
I want to initially update the ODS2 with <u>selection conditions</u> from ODSA.
After that I want to load delta from ODSA to ODS2 by automating the process in process chain.
Please help me know, What is the optimum solution and what are the steps need to be executed.
Thanks,
John.

Anil,
I am just repeating the procedure to cinfirm that I understand it properly.
1. Go to scheduler, Initialization option make the status of the overall request red.
2. when it asks for update the QM status to all data targets, select no.
3.and then delete the init. request from Scheduler.
By doing this we just deleting the initialization selection and the request in the subsequent data targets are still green and they contain data.
After that Init. without data transfer will do the work.
Please confirm,
I really appreciate your input on this.
Thanks.

How to debug start routines of update rules from ODS to InfoCube

Dear gurus,
I have an update rule from ODS to InfoCube. I wrote a start routine in the update rule. Now I want to debug it. I went to monitor and simulate update the data package and only got the prompt "No data exists in the corresponding PSA table". So how can I debug this start routine?
Thanks in advance.
Jin Ming

Jin,
In order to use PSA between ODS and InfoCube, you may have to use an exclusive InfoPackage and load separately. In that InfoPackage, choose the radio button to use a PSA.
I think you are currently updating the InfoCube directly without using a separate InfoPackage.
Look for an InfoSource under DataMarts (search for 8<ODS Technical name>) and create your InfoPackage there.
Good luck.

Error while copy of Update Rules from ODS 0SD_O03 to InfoCube 0SD_C13

Hi all,
I work on a NW04s SPS9 System I would like to simply copy Update Rules (from an ODS to an InfoCube) from the BCT to the 1:1 Z-Copies of these Objects.
To do so, I copied the InfoProviders 0SD_O03 and 0SD_C13 to Z-Versions. In SAP BCT the InfoCube is updated from the ODS. The ODS itself is updated from InfoSource.
After successfully copying the two InfoProviders as next step I tried to copy the Update Rules from the Content version Objects to the Z-Version Objects to link them.
Similar to copying update rules in 3.5 I tried
- right click on "ZSD_C13"
- choose Additional Functions - Create Update Rules"
- choose DataSource: ODS Object "ZSD_O03"
- choose Copy from: InfoCube "0SD_C13"
This result in the error "0SD_C13 is not suitable as a template for copying update rules".
Some hints that might help:
1. The very same error occurs if I try to copy the Update Rules from 0SD_O03 to 0SD_C13.
2. I also tried to copy both Update Rules (to C12 & C13) on a BW 3.5 system where it worked fine: The update rules from both Z-ODSs to both Z-Cubes were copied correctly 1:1 and without any errors.
3. In the NW04s System I was able to copy the Update Rules from the InfoSource 2LIS_11_VAITM to 0SD_O01 (as well as from 2LIS_11_VAHDR to ODS 0SD_O03). So I only cannot copy Update Rules from ODSs to InfoCubes while it is possible to copy Update Rules from InfoSources to ODSs.
4. During copy of 0SD_O03 the system warned: "InfoObject 0FISCVARNT needs to be in key for DataStore object ZSD_O03". No matter whether I move this IO to the keys of the Z-ODS, the Update Rules copy does not work.
- This warning does not show up on BW3.5 when I copy the very same ODS. Can anyone explain this?
- This warning is not displayed during the copy of ODS 0SD_O01, just for 0SD_O03.
5. Obviously during a preceding test I actually must have been able to copy the Update Rules for another copy of 0SD_C13 (as I can see the Update Rules in the SAPGUI). I stopped this first test as I was not able to do the Update Rules copy for 0SD_C12.
Yet as of today I cannot copy Update Rules this for both cubes 0SD_C13 as well as 0SD_C12. So yesterday there was no error on copying the Update Rules to InfoCube ZSD_C13, but today there is. To my knowledge nothing has been changed in the System Setup / Customizing in the mean time.
6. For both cubes ZSD_C13 as well as ZSD_C12 it is possible to copy Update Rules that map from the BCT ODS to the Z-InfoCbes. So I can copy Update Rules from 0SD_O03 to ZSD_C13 and from 0SD_O01 to ZSD_C12. This would point in the direction that the copied ODSes are the source of this behavior?
I am not sure whether this is a special NW04s behavior and how to use it correctly so the Update Rules can be copied.
Please could you help on how to copy these Update Rules in NW04s or share your experience if you had similar?
Thanks a lot,
Werner

Hi Vinod,
Check the update rules for the original cube. Are they active? It appears that they contain a formula...check this too.
Hope this helps...

Further update from ODS to IO attr

Similar Messages

Maybe you are looking for