Fuser Error code 50.1 on hp colour laserjet 4700dn

Fuser Error code 50.1 on hp colour laserjet 4700dn. what should i do

50.1 error message indicates a fuser under-temperature error. The fuser did not reach the correct operating temperature during the warm up process causing a 50.1 error. This could indicate a problem with the power source or it could be paper stuck in the fuser if the 50.1 error follows a paper jam.
To resolve the fuser error, try troubleshooting steps given in below link:
http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-bpl11838

Similar Messages

50.2F.00 fuser error

I have a LaserJet M4555 MFP with a fuser error code of 50.2F.00. The screen says to turn it off, then back on and if the issue persists, to call a tech. Well, I have tried turning it off and back on. I tried booting it without the network cable. I even replaced the fuser. And I still have the error. Any ideas on how to fix it without throwing parts at it?

This is a low or no temp error. If the fuser has indeed been replaced with a known working fuser and still have the same error, then the next step to to check all the connections for the fuser as indicated below:
W = 2: Reconnect the connectors (J53, J54 and J82) on the DC controller PCA.
3. Replace the fuser.
4. W = 2: Reconnect the connector (J62) on the low-voltage power supply PCA.
5. If the error persists, replace the low-voltage power supply.

HP LaserJet Pro M1536dnf Multifunction Printer (unable to add print driver hpfax1, error code 87)

Hi, my printer HP LaserJet Pro M1536dnf Mfp, suddenly didnt work so i remove the printer, and downloaded a new driver http://support.hp.com/us-en/drivers/selfservice/HP-LaserJet-Pro-M1536-Multifunction-Printer-series/3974271/model/3974278#Z7_3054ICK0KGTE30AQO5O3KA30R1 once dowloaded, i run it and uninstall the printer, restart my pc, and proceed to installing. but in the process of installing a error occurr, saying that "Unable to add printer, error code 87", and that " HP Toolbox FX has encountered an error and can not recover. once i click ok. it tells me to restart my pc and reinstall it again. i did it for 8x, and still with the same error. please help really need a help right now. as my boss is going to kill me

Hey , Welcome to the HP Support Forums!
I understand that you're getting the error 'Unable to add print driver hpfax1, error code 87' when installing your HP LaserJet Pro M1536dnf Multifunction Printer on your Windows 7 computer. I would like to assist you today with resolving this install issue. Thank you for including all of the troubleshooting steps that you have completed prior to reaching out for support. At this time I am going to walk you through some additional software and driver troubleshooting steps. Please follow all of the steps below. If you're using your HP Laserjet through a USB Cable connection, please disconnect that cable now. Step one: Remove Driver: 1. Click on your Start menu 2. Select Control Panel 3. Select Programs and Features 4. When Programs and Features opens a list of programs installed on your computer will populate. Click on the 'Installed ON' tab at the top to change the date so the recently installed items show at the top. This will make it easier to manually locate the three HP Laserjet items you need to uninstall. 5. Next, look for the HP LJ M1530 MFP Series HP Scan, HPLaserJetHelp_LearnCenter, and HP LaserJet Professional M1530 MFP Series. If you see any 3 of these, or all 3 of these items, please click on them and select Uninstall. Once you have confirmed that those three items have been uninstalled, please close Programs and Features and proceed to the next step. Step 2: Clear Temp Files: Click on your Start menuIn the 'search programs and files' box located right above Start after you click on it, type %temp% and hit enter on your keyboardWhen the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will now highlight.Select the 'delete' button on your keyboard. The Temp folder contains temporary internet files. No actual files or folders on your computer will be affected by deleting the Temp files. Should a Temp file still be used than you will automatically get the pop up to 'skip' that item.Close the Temp folder once it is emptiedRight click the Recycling Bin on your desktop and select Empty Recycling BinPlease proceed to the next step. Step 3: Download Installer Package: Please click here to download the Full Feature Installer package. Once the download is complete, click on the download to allow it to 'Run'An extraction should now automatically occur. Once the extraction is complete an installer window will open. Please close the installation window. You do not want to run the installation at this time. Step 4: Run Scrubber: To ensure that no trace of the HP Software and Driver package remain on your computer, I am going to have you run a Scrubber built into the installer package for your printer. Click on your Start menuIn the 'search programs and files' box located right above Start after you click on it, type %temp% and hit enter on your keyboardWhen the Temp folder opens locate the 7z folder. Click on this folder to open it. This is the HP Laserjet Installer Click on the Utilities folder under the 7z folderDouble left click on Scrubber. It is an application which should launch the HP Uninstaller. Please follow the onscreen prompts to complete the uninstaller. Once the uninstall has completed please proceed to the next step. Be sure to Restart your computer if the uninstall process prompts you to. Step 5: Check Print Server Properties: Click on your Start menuClick on Devices and PrintersIn the Devices and Printers window look for your HP Laserjet. If you see it listed please right click on it and choose 'Delete' or 'Remove Device'. Next, click on any device listed under 'Printers and Faxes' once just to highlight itClick Print Server Properties at the top of the windowClick on the Drivers tabLook for your HP Laserjet driver. If you see it click on it and click Remove at the bottomClick Remove Driver OnlySelect OKSelect Apply and OK on the Print Server Properties windowClose Devices and Printers. Please proceed to the next step. Step 6: Run Disk Cleanup Utility: Click on your Start menuSelect All ProgramsSelect AccessoriesSelect System ToolsSelect Disk Cleanup Run a Disk Cleanup on the C DriveWhen prompted, check Downloaded Program files, Temporary Internet Files, Recycle Bin, Temporary Files, and Thumbnails Once the Disk Cleanup is complete, please proceed to the next step. Step 7: Run CCLeaner: To ensure that there are no malicious files on your computer or Registry conflicts on your computer I am going to have you run a CCLeaner before we install your printer. Please click here to download the CCLeaner Tool. Once the website opens select the link at the top for 'Free Download'. Once the download is complete please complete the Scan. Should multiple malicious files be found you may need to run the Scan multiple times to remove all malicious files. Once your system comes back as clean, please proceed to the last step. Step 8: Install Device: Please click here to download the Full Feature Installer package for your HP LaserjetOnce the download is complete please allow the download to RunPlease follow the onscreen prompts to install your HP LaserjetIf using a USB Cable connection please do not plug in the USB Cable until the installer window prompts you to Once the installation has completed successfully please test your machine to confirm that everything is functioning properly. Please respond to this post with the result of your troubleshooting. I look forward to hearing from you. Good luck!

Error code 49.DF.FF when printing any .doc documents using google cloud.

Hi, I am getting error code 49.DF.FF when printing any type of .doc documents on Google cloud. The device used is HP Colour Laserjet cp5525. All other file formats print ok .pdf, .jpg, .xls, .txt. So far I have upgraded the latest firmware, changed the IP address of the printer and performed a partial clean on the disk. Has anyone else has this issue?

I've been seeing some issues with google cloud print jobs for the last day or so, that werent occuring before then. In the past these types of issues usually resolve themself within a day or two, so I would suggest trying the job again tomorrow. Google Cloud Print is in beta still, so there are constantly updates and changes being made that can break things, but generally get resolved fairly quickly.
Jon-W
I work on behalf of HP
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
Click the KUDOS STAR on the left to say “Thanks” for helping!

OPatch failed with error code 74

- What can I do to fix this error when applying an Oracle patch for 10.2.0..2 on HP-UX B11.11 64 Bits.
- I get this error when applying all patches.
This is the screen shot.
dr3dvqa:orau3d 103> cd /oracle/stage/102_64/patches/5063279; opatch apply -force
Invoking OPatch 10.2.0.2.5
Oracle Interim Patch Installer version 10.2.0.2.5
Copyright (c) 2007, Oracle Corporation. All rights reserved.
Oracle Home       : /oracle/U3D/102_64
Central Inventory : /oracle/oraInventoryU3D
   from           : /var/opt/oracle/oraInst.loc
OPatch version    : 10.2.0.2.5
OUI version       : 10.2.0.2.0
OUI location      : /oracle/U3D/102_64/oui
Log file location : /oracle/U3D/102_64/cfgtoollogs/opatch/opatch2008-03-04_16-08-50PM.log
ApplySession applying interim patch '5063279' to OH '/oracle/U3D/102_64'
Interim patch 5063279 is a superset of the patch(es) [ 5063279 ] in OH /oracle/U3D/102_64
OPatch will rollback the subset patches and apply the given patch.
Running prerequisite checks...
Prerequisite check "CheckRollbackable" on auto-rollback patches failed.
The details are:
Patch 5063279:
Archive Action: Source file "/oracle/U3D/102_64/.patch_storage/5063279_Nov_28_2006_04_15_32/files/lib/libserver10.a/kdibl.o" does not exist.
'oracle.rdbms, 10.2.0.2.0': Cannot update file '/oracle/U3D/102_64/lib/libserver10.a' with '/kdibl.o'
ApplySession failed during prerequisite checks: Prerequisite check "CheckRollbackable" on auto-rollback patches failed.
System intact, OPatch will not attempt to restore the system
The following warnings have occurred during OPatch execution:
1) OUI-67078:Interim patch 5063279 is a superset of the patch(es) [ 5063279 ] in OH /oracle/U3D/102_64
OPatch failed with error code 74

The log file
/oracle/U3D/102_64/cfgtoollogs/opatch/opatch2008-03-04_16-08-50PM.log
has this ...
SEVERE:OPatch invoked as follows: 'apply -force '
INFO:
Oracle Home       : /oracle/U3D/102_64
Central Inventory : /oracle/oraInventoryU3D
   from           : /var/opt/oracle/oraInst.loc
OPatch version    : 10.2.0.2.5
OUI version       : 10.2.0.2.0
OUI location      : /oracle/U3D/102_64/oui
Log file location : /oracle/U3D/102_64/cfgtoollogs/opatch/opatch2008-03-04_16-08-50PM.log
INFO:Starting ApplySession at Tue Mar 04 16:08:51 GMT-07:00 2008
INFO:Starting Apply Session at Tue Mar 04 16:08:51 GMT-07:00 2008
INFO:ApplySession applying interim patch '5063279' to OH '/oracle/U3D/102_64'
INFO:Starting to apply patch to local system at Tue Mar 04 16:08:51 GMT-07:00 2008
INFO:Start the Apply initScript at Tue Mar 04 16:08:51 GMT-07:00 2008
INFO:Finish the Apply initScript at Tue Mar 04 16:08:51 GMT-07:00 2008
INFO:Patch 5063279 is superset of 5063279
INFO:Patch 5063279 has no conflicts/superset wiht any other patch processed till now
INFO:Checking conflicts for patch: 5063279
INFO:Checking conflicts/supersets for patch: 5063279 with patch:5063279
INFO:Checking conflicts/supersets for patch: 5063279 with patch:4518443
INFO:Checking conflicts/supersets for patch: 5063279 with patch:4271217
INFO:Checking conflicts/supersets for patch: 5063279 with patch:3748430
INFO:Checking conflicts/supersets for patch: 5063279 with patch:6771608
INFO:Checking conflicts/supersets for patch: 5063279 with patch:5746835
INFO:Checking conflicts/supersets for patch: 5063279 with patch:6740811
INFO:Checking conflicts/supersets for patch: 5063279 with patch:5632264
INFO:Checking conflicts/supersets for patch: 5063279 with patch:5499655
INFO:Checking conflicts/supersets for patch: 5063279 with patch:5390946
INFO:Checking conflicts/supersets for patch: 5063279 with patch:4704890
INFO:Checking conflicts/supersets for patch: 5063279 with patch:6729801
INFO:Checking conflicts/supersets for patch: 5063279 with patch:6663258
INFO:Checking conflicts/supersets for patch: 5063279 with patch:6455795
INFO:Checking conflicts/supersets for patch: 5063279 with patch:6447320
INFO:Checking conflicts/supersets for patch: 5063279 with patch:6435823
INFO:Checking conflicts/supersets for patch: 5063279 with patch:6340979
INFO:Checking conflicts/supersets for patch: 5063279 with patch:6153847
INFO:Checking conflicts/supersets for patch: 5063279 with patch:6046043
INFO:Checking conflicts/supersets for patch: 5063279 with patch:6005996
INFO:Checking conflicts/supersets for patch: 5063279 with patch:5495639
INFO:Checking conflicts/supersets for patch: 5063279 with patch:5099992
INFO:Checking conflicts/supersets for patch: 5063279 with patch:5941030
INFO:Checking conflicts/supersets for patch: 5063279 with patch:5308692
INFO:Checking conflicts/supersets for patch: 5063279 with patch:5762514
INFO:Checking conflicts/supersets for patch: 5063279 with patch:5636728
INFO:Checking conflicts/supersets for patch: 5063279 with patch:5635254
INFO:Checking conflicts/supersets for patch: 5063279 with patch:5618049
INFO:Checking conflicts/supersets for patch: 5063279 with patch:5581518
INFO:Checking conflicts/supersets for patch: 5063279 with patch:5530958
INFO:Checking conflicts/supersets for patch: 5063279 with patch:5442919
INFO:Checking conflicts/supersets for patch: 5063279 with patch:5377099
INFO:Checking conflicts/supersets for patch: 5063279 with patch:5369855
INFO:Checking conflicts/supersets for patch: 5063279 with patch:5103126
INFO:Checking conflicts/supersets for patch: 5063279 with patch:5063279
INFO:Patch 5063279 is Superset of 5063279
INFO:Checking conflicts/supersets for patch: 5063279 with patch:5052029
INFO:Checking conflicts/supersets for patch: 5063279 with patch:4952782
INFO:Checking conflicts/supersets for patch: 5063279 with patch:4883635
INFO:Checking conflicts/supersets for patch: 5063279 with patch:4864648
INFO:Checking conflicts/supersets for patch: 5063279 with patch:4773931
INFO:Checking conflicts/supersets for patch: 5063279 with patch:4668719
WARNING:OUI-67078:Interim patch 5063279 is a superset of the patch(es) [ 5063279 ] in OH /oracle/U3D/102_64
INFO:OPatch will rollback the subset patches and apply the given patch.
INFO:
Running prerequisite checks...
INFO:Space Needed : 657540
INFO:Prereq checkPatchApplicableOnCurrentPlatform Passed for patch : 5063279
INFO:Start fuser command /usr/sbin/fuser /oracle/U3D/102_64/bin/oracle at Tue Mar 04 16:08:55 GMT-07:00 2008
INFO:Finish fuser command /usr/sbin/fuser /oracle/U3D/102_64/bin/oracle at Tue Mar 04 16:08:55 GMT-07:00 2008
INFO:
Patch 5063279:
Archive Action: Source file "/oracle/U3D/102_64/.patch_storage/5063279_Nov_28_2006_04_15_32/files/lib/libserver10.a/kdibl.o" does not exist.
'oracle.rdbms, 10.2.0.2.0': Cannot update file '/oracle/U3D/102_64/lib/libserver10.a' with '/kdibl.o'
INFO:Prerequisite check "CheckRollbackable" on auto-rollback patches failed.
The details are:
Patch 5063279:
Archive Action: Source file "/oracle/U3D/102_64/.patch_storage/5063279_Nov_28_2006_04_15_32/files/lib/libserver10.a/kdibl.o" does not exist.
'oracle.rdbms, 10.2.0.2.0': Cannot update file '/oracle/U3D/102_64/lib/libserver10.a' with '/kdibl.o'
SEVERE:OUI-67074:ApplySession failed during prerequisite checks: Prerequisite check "CheckRollbackable" on auto-rollback patches failed.
INFO:System intact, OPatch will not attempt to restore the system
INFO:----
INFO:The following warnings have occurred during OPatch execution:
INFO:1) OUI-67078:Interim patch 5063279 is a superset of the patch(es) [ 5063279 ] in OH /oracle/U3D/102_64
INFO:----
INFO:Finishing ApplySession at Tue Mar 04 16:08:55 GMT-07:00 2008
INFO:Total time spent waiting for user-input is 0 seconds. Finish at Tue Mar 04 16:08:55 GMT-07:00 2008
INFO:Stack Description: oracle.opatch.PrereqFailedException: Prerequisite check "CheckRollbackable" on auto-rollback patches failed.
INFO:StackTrace: oracle.opatch.OPatchSessionHelper.runApplyPrereqs(OPatchSessionHelper.java:3635)
INFO:StackTrace: oracle.opatch.ApplySession.processLocal(ApplySession.java:3529)
INFO:StackTrace: oracle.opatch.ApplySession.process(ApplySession.java:5238)
INFO:StackTrace: oracle.opatch.OPatchSession.main(OPatchSession.java:1544)
INFO:StackTrace: oracle.opatch.OPatch.main(OPatch.java:570)
INFO:File "/oracle/U3D/102_64/.patch_storage/patch_unzip" cannot be deleted as it does not exist

Phaer 8850 error code 36,002.46:119281

Hi there, Came in this morning sent a two page document to my Phaser 8860, one page printed out with two blanks that appeared to have fuser oil on them and there was a message with this error code 36,002.46:119281. I did what every good techie does - reboot! Alas, no such luck. Google was no help with this particular error code either. What does this code mean? Thanks! Amy

Drum Maintenance Kit faultIt's the unit in the little door on the right side. Possibly needs to be replaced, possibly just dirty, try wiping the plastic blade with a soft, no lint, cloth and put it back in. I couldn't find the code anywhere either, even internally, but a co-worker did.

PP crashing and giving NVIDIA OpenGL Error Code:6 when in FCP XML sequence

Hi guys/gals,
In an attempt to do an online and colour grade of a music video I shot with the EPIC recently, I loaded up a FCP XML (created with FCP version 7) file into a new 2k, 2:1, 23.98 sequence from the presets and re-linked the offline EPIC .r3D's to color in PP and AE CS5.5.
Mix of sizes, 2k, 3k and 5k as well as some 5D shots. My playback settings are Paused: Full and Play: 1/8th
As I go through and clean up the sequence for finishing Premiere Pro keeps crashing and giving me an error:
NVIDIA OpenGL Driver Error Code: 6
"Your hardware configuration does not meet minimum specs"
When I build a new sequence from scratch with all the same footage, PP chugs along and moves slowly as I make changes and scrub through the footage but it doesn't crash.
Is this a known issue with FCP XML's and PP and is there a fix?
As far as I know my system is spot on and up to date on all drivers, could it be a faulty GPU??
Specs:
GEFORCE 285.62 DRIVER
I am running CS5.5, with EPIC plug ins installed.
Asus Sabretooth
Intel i7 3600
16GB Corsair RAM
Nvidia GTX580
120GB SSD C:
2TB Raid0
Thanks for any advice in advance.
Cheers,
Kevin

"Mix of sizes, 2k, 3k and 5k"
You would need Max GPU memory to play back that high resolution material consistent flawless.
How much on dedicated Memory does the Nvidia GTX580 have?
Later, I searched at new egg, they had GTX580s with choice of either
1536MB or 3GB.
You may need the 3gb model to get MPE Hardware acceleration correctly with 3k and 5k material.

Cannot delete file from external hard drive (error code 36) in Finder, but Terminal is ok

I have a relatively new Macbook Pro Retina 15" and have a Western Digital 1 TB Passport. I've been using the passport for about a year now without any problems on older Macbooks in my house. I used to be able to read and write to this drive no problem. I am using the Paragon NTFS for Mac software in order to read and write to the NTFS drive. When I navigate through the drive in Finder, if I try to create a new folder, I do not have a problem. If I try to delete that folder I just created, I get this error:
The Finder can’t complete the operation because some data in “untitled folder” can’t be read or written.
(Error code -36)
The folder has nothing in it whatsoever. I just created it. But if I go to Terminal and I run
rm -rf "untitled folder"
This works fine. Why is Terminal acting different than Finder? This does not happen on my other Macbooks. Thanks in advance.

Thanx for such qucik reply!!! The pages were great, it had an answer for my problem, but unfortunately it also involved me dealing with it only on the MacIntosh HD itself, not on mounted external drive I suppose... So it didn't work they say that there is an icon in the left corner indicating locked folder - I don't see any icon on it. It says you can untick the box to unlock the folder - there is no tick to be unticked. Finally, they say that if I don't have permition or rights I cannot delete it. But how do i change permittion which already says that i can read and write in it? So everything appears to be normal only I cannot delete it. there is not even any warnig telling me I don't have enough rights, it just requires the password and after me typing it in it makes the sound of scraping paper but does nothing more. I aslo had some problems with emptying Trash after being seemingly succesful with one file and had got so far to have them appear in the Trash (no clue how this one actully got there though..) I followd the advice and emptied the Trash with Terminal. The Folder is still there but it shows 0 Kb... So far so good BUT: It is still on the external drive, so I obviously only managed to copy it into the Trash!!! Phew, innit a bit too tight to poor owners, this macbook?? I want my rights back!

Report generation failed----error code:-17205; Access Denied.

Hi, All
    i have a trouble about report generation.it seems the error happened at the "write UUT report"--this step is teststand report generation'DLL.
    detail:
    An error occurred calling 'Save' in 'Report' of 'NI TestStand 2010 SP1 API'
Access Denied.. Error writing to file 'D:\program\seq\xxx.xml'.
The file might be open in another application. If file access is intermittently denied, you should try disabling the Microsoft FindFast utility.
    error code:-17205; Access Denied.
    locationtep 'Write UUT Report' of sequence 'Single Pass' in 'SequentialModel.Seq'
    How to fix it?
    Thanks a lot.
BR

Hm, it looks like the file might be open in another application. If you see that file accesss is intermittently denied, you should try disabling the Microsoft FindFast utility.
CTA, CLA, MTFBWY

There was a recent upadate on my PC, however it does not work. A error code comes up which says, min version is not compatible with max version. And I caanot open my browser. Please help.

I do a system restore which allows me to open my browser. Without this I cannot open my browser - the error code comes up every time.

Do a clean (re)install
* Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data when uninstalling.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
From https://support.mozilla.com/en-US/questions/764376

My ipod touch is not list as a device on itunes. When I tried do update itunes, I get a ox8007054f error code and the update will not complete.

My ipod touch is not listed as a device when connected to my computer. As suggested I attempted to download the latest of itunes. I got an
ox8007054f error code and the down load will not complete. I have also tried to restore my computer to an earlier setting, but it will
not accept the change.

Have you looked at this completed previos discussion. It discusses 0x8007054F.
Re: Error message when trying to install iTunes

Capturing oracle error codes into a variable

Hi
Can someone show me how it is possible to save an Oracle defined error code into a variable? What I am trying to do is when a stored procedure fails an Oracle error is raised, such as ORA-xxxx, then pass this code into variable to be saved into a log.
How do I achieve this?

user633278 wrote:
How do I achieve this?Function SQLCODE in PL/SQL exception handler returns error code. SQLERRM returns message:
SQL> declare
2      x number;
3 begin
4      x := 1/0;
5    exception
6      when others
7        then
8          dbms_output.put_line('Error code: ' || SQLCODE);
9          dbms_output.put_line('Error message: ' || SQLERRM);
10 end;
11 /
Error code: -1476
Error message: ORA-01476: divisor is equal to zero
PL/SQL procedure successfully completed.
SQL> SY.

Error Code:942 While Scheduling a report in BI Publisher

Hi All,
I am trying to schedule one report in BI Publisher.
After Clicking Submit Button while scheduling report,i get following error:
Exception [TOPLINK-4002] (Oracle TopLink - 11g Release 1 (11.1.1.0.0) (Build 080319)): oracle.toplink.exceptions.DatabaseException Internal Exception: java.sql.SQLException: ORA-00942: table or view does not exist Error Code: 942 Call: UPDATE SEQUENCE SET SEQ_COUNT = SEQ_COUNT + 50 WHERE SEQ_NAME = 'JOB_ID_SEQ' Query: DataModifyQuery()
Kindly Help me in resolving this issue
Regards
Amrita Singh

i know the issue,i can give quick fix, but in-order to make sure you don't get another glitch like this.
I would recommend, you to install the scheduler in another schema or another db.
Re-installing the scheduler schema tables will fix this.

ORA-00600: internal error code, arguments: [ktsircinfo_num1]

While taking export of a table received EXP error and while dropping/selecting the same gor ora-600 errors.
. . exporting table TEST4
EXP-00003: no storage definition found for segment(29, 371385)
SQL >Drop table test4 cascade;
ORA-00600: internal error code, arguments: [ktsircinfo_num1], [29], [29], [371385], [], [], [], []
sql> Desc test4;
ORA-00600: internal error code, arguments: [ktsircinfo_num1], [29], [29], [371385], [], [], [], []
I dont want to log TAR with oracle right now... I tried dropping and recreating Undo tablespace but still did not help much . Database version is 9204

hi
read metalink ID - 153788.1
CHeers

Transport control program tp ended with error code 0212

Hi all,
I have created a two system landscape of development & production server. But while I am releasing any request from develpoment server a error is showing: " Transport control program tp ended with error code 0212 Errors: could not access file as supposed (see dev_tp or S".I have chosen development server as domain controller. TMS alert viewer error message also contains the following information------>command: TMS_MGR_READ_TRANSPORT_QUEUE
                                                                       service: transport service
                                                                       start : online
                                                                       Function: TMS_TP_SHOW_BUFFER
                                                                       message: TP_REPORTED_ERROR
In import monitor it's showing : "tp finished: could not access file as supposed (see dev_tp or SLOG1113.K"
Can you tell me how to resolve this issue?

dev_tp contains:
This is R3trans.exe version 6.14 (release 700 - 09.04.10 - 11:26:00).
unicode enabled version
usage: R3trans.exe [<options>] <control_file>
The control_file describes what R3trans has to do.
The following options are possible:
-c f1 f2 : Copy file f1 to f2 with character set conversion.
-d       : DB connect. Test if SAP database is available.
-i file : Import from file without using a control file.
-l file : List the contents of file to the log file.
-m file : List the contents of file to allow tp to create a cofile.
-t       : Test. All database changes are rolled back.
-t4      : Trace level 4. Switch on developer trace.
-u <int> : Unconditional modes. See below.
-v       : Verbose. Write more details to the log file.
-w file : Log file. The default log file is 'trans.log'.
-x       : DB connect without access on any SAP table.
R3trans.exe finished (0012).
& the slog file is not there in the trans/log directory

Fuser Error code 50.1 on hp colour laserjet 4700dn

Similar Messages

Maybe you are looking for