Fuser error for HP Color LaserJet 3600 Series Printer

My HP Color LaserJet 3600dn Printer have Fuser error message. What is the problem ?

The product you have seems to be a commercial printer. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You may find the Commercial Laserjet board here.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
You can also view the article related to this product here:
http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesI...
Hope this helps!
Help the community by marking this post as a solution if it solved your issue!.
If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

Similar Messages

HP Color LaserJet 3600 series (VISE Installer)

Hi everyone,
I made the mistake of using the VISE Installer that HP suggests as a download for the HP Color LaserJet 3600 series printer. I installed it, and then couldn't figure out why I still couldn't see this printer driver. After reading http://docs.info.apple.com/article.html?artnum=303057#hpdrivers and learning that the "driver" included for the Color LaserJet 3600 is not a "Modern Driver", I realized that installing the VISE installer from HP does me no good.
Now, I have two questions:
1) How can I uninstall this stuff that HP crammed onto my system? The VISE Installer seems like its a blast from the pre-OS X past, and doesn't appear to offer any sort of uninstallation. Do I need to write up a shell/AppleScript to read the log it writes to my / and remove the files manually? (I'd rather not do that, but I will if I have to).
2) Is there a PPD that anyone knows of for this printer? I'd like to be able to print to it over our network, and I need a "Modern driver" (i.e. PPD) to do that.
Thanks dudes!
MacBook Pro 15.4" Mac OS X (10.4.8)

To get a modern driver, you'll have to install a few open source packages. Try hpijs and ESP ghostscript from here:
http://www.linuxprinting.org/macosx/hpijs/
(I think you have to use the 3500 model choice/PPD).
If that doesn't work, you'll have to compile the driver:
http://www.linuxprinting.org/showprinter.cgi?recnum=HP-Color_LaserJet3600

HP Laserjet 3600 Series Printer with a blank or incorrect colour column down left side of page

Have a HP3600 Series Laserjet that has started to show a definite column (about 1/2" wide) of incorrect colour down the lefthand side of the page. Narrowed it down to the Magenta Cartridge after printing a diagnostics page. Have replaced the Magenta Cartridge after doing calibrations and diagnostics and have also now replaced the Fuser Kit. Still the same - has anyone any suggestions?

Hi ProspeorusCE,
The product you have is a commercial printer. I suggest posting in the forum for HP Business Support for a better chance at finding a solution.
Here is the link to the Commercial Laserjet board:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Color Laserjet 3600 PQ print quality test pink shows faded on right side

All the color print outs have this somewhat faded color on the right side.
When I ran the PQ test under troubleshooting it shows on the pink page missing color pink towards the right side.
fades into white / blank. Already changed the toner and still happens. I calibrated that printer twice and still occurs.
what else can i do to fix this?

Hi ProspeorusCE,
The product you have is a commercial printer. I suggest posting in the forum for HP Business Support for a better chance at finding a solution.
Here is the link to the Commercial Laserjet board:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

HP Color LaserJet 2550 series

Hi,
I installed the HP Printer Driver Pack available on the Apple site for my HP Color LaserJet 2550 series printer. It works, but there are some odd things here.
First, the driver can't read the printer state. Like how much is left for each colour and things like that. It just says, No information available.
Second, When I print after I already printed something else the printer will be unavailable according to the driver. I need to turn of the printer and back on for it to print again.
Third, When there is an image on one of the pages (LibreOffice) it takes forever for that page to be printed.
Via the App Store I get new versions of the driver pack, so I am up to date.
Also, when I connect this same printer to my Laptop (Linux) everything works. These are HP drivers for Linux. My laptop can read the printer and ink/toner status. I don't have to turn off the printer after each job and images print a lot faster. Ok, real big high ress photos not, but normal images just roll out. Whilst on my Mac it takes minutes.
So in my opinion there is something wrong with the driver. I reinstalled the printer, and due to some other issue I reinstalled OS X but the problem remained.
I hope there is a resolution for this.
Thanks,
Ricardo

I managed to get some success by rebuilding as described in another posting:
Dominique Simon
Re: HP Laserjet 2550L prints one job then hangs
Jun 15, 2012 2:13 AM (in response to Fami R.)
I had this issue too with my HP 2550. No more printing after the first printjob possible
I managed to get the printer working as expected by removing the hp_io_enabler kext.
sudo -s
mkdir /Valhalla
mv /System/Library/Extensions/hp_io_printerclassdriver_enabler.kext /Valhalla
exit
Wait for the systemcaches to be rebuilt and reboot. You can see if the caches are being rebuilt by opening the Activity Tool, the process is named kextcache.
You need to have the Valhalla Folder in root of course.
Not very mac-like, but it works

I need a print driver for the HP Color LaserJet 3600 for OS X 10.8.3

Now that I have updated to the newest OS I'm frustrated because neither Hewlett Packard nor Apple has a driver for the printers that I have. So I can't print from my laptop to any of my printers. I just need a driver option for and HP Color LaserJet 3600, Canon MF5900 Series, and a Hewlett Packard CP1518.

Information/possible solution:
Printer Setup
https://discussions.apple.com/message/4367330#4367330
HPIJS for Mac OS X
Gimp - Print

Color LaserJet 3600 and 10.6 over wireless (Broadcom Wireless Chipset)

Checking the archives, I've found that I'm not the only person who has experienced problems printing to a Color LaserJet 3600 via wireless. Those threads were archived with no solution so I couldn't reply, but I wanted to expand on what I discovered.
It is not so much Mac OS X 10.6, but the way HP's horrible host-based printing drivers are tied to the wireless. I've discovered that laptops with 10.6 that are also using the newer Broadcom BCM43xx chipset will garble their print command, causing the print queue to mess up on the host machine, and the printer to become unresponsive to all other machines (it perpetually thinks there's something in the queue, so no other print commands will go through.) The three laptops I tested were the unibody aluminum 13" MacBook Pro, unibody aluminum 15" MacBook Pro, and the plastic unibody 13" MacBook; all with clean installs of 10.6.2. All three laptops have the same printing error.
Laptops with the Atheros 5416 chipset work fine, even with 10.6. Laptops tested with this chipset were the aluminum 15" MacBook Pro, aluminum 17" MacBook Pro, and the white MacBook.
This is not any fault of Apple, it is HPs abysmal host-based printing system. The solution to this problem until HP updates their printer drivers is to use the open source HPIJS drivers (HP drivers for the Linux Foundation Open Printing.) You'll need HPIJS, Foomatic-RIP, and Ghostscript; all installers are listed and come with uninstallers should any unexpected errors occur.
I don't know Apple's policy on linking to external websites, but a simple Google search for HPIJS will give the desired link.
This may be a good solution for 10.4 and 10.5 clients working across subnets, as the HPIJS drivers can be used via simple LPD/LPR instead of the HP IP Printing System that relies on mDNS.
Once installed, when you type in the IP address of your Color LaserJet 3600, you'll be presented with the option of choosing the HPIJS driver.
Additionally, if you use the HP drivers for the LaserJet 3600 over both wired and wireless network, you must add the printer while on the wireless network only; it is important that you disconnect the ethernet cable. If you add the printer while using a wired connection, the printer will not work over wireless; however, if you add the printer while on a wireless connection, the printer will work on either wireless or wired.
Yes, the HP host-based drivers are that ridiculous.

Unfortunately 10.6.3 did not fix the problem.
I've also, unfortunately, found out that the HPIJS will also eventually fail to print.
This is beyond frustrating since we invested several thousands of dollars in these printers and we can't use them.

HP Color LaserJet 3600(not 3600n) with Fast Ethernet port - can I use it?

Hello! There is a HP Color LaserJet 3600 in our company connected via USB with XP-based PC. Recently I decided that we need this printer be shared directly trough our ethernet network, so I started to learn manuals - its own manual, Jet Direct, and all that stuff. The printer's manual says that HP Color Laserjet 3600 does not have neither its own ethernet port, nor support for embedded print-server like JetDirect 620n.
But!
Visual check shows that this HP 3600 DOES have its own ethernet port and if I connect it to network or at least to a notebook - it blinks like any other ethernet port with "lights" should do.
However.
Neither front panel, nor back panel says anything about network support(like letter "n" in model name).
Configuration page print also does not know about that mysterious port.
So my questions are:
1. What is this port actually?
2. Can I use it to share printer over network? Maybe, there is a way to upload 3600n's firmware somehow?

The product you have seems to be a commercial printer. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You may find the Commercial Laserjet board here.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
You can also find the article pertaining to this product here:
http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesI...
(contains basic troubleshooting info, manuals, drivers, etc)
Hope this helps!
Help the community by marking this post as a solution if it solved your issue!.
If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

HP Color LaserJet 2800 series 2820

Question
Why is it, that the software delivered by HP them selve, isn't working as it should?
I've installed the DVD on 10.5 and I could scan, but not print.
After an uninstall of the DVD I could print, but not scan.
Now I've upgraded to 10.6.1. As I've read, several drivers are installed when needed. But as the Apple paged shows, no scan support for my printer.
Why doesn't HP make a print/scan driver so my expensive All-in-one printer could FINALY work as it should.
Is there a driver out there for Snow Leopard that does the trick of print/scan functionality?
Are there more people who are experiencing this problem?
Why does HP says it has OSX support for it's printer, if the driver AND installation software are of the minor quality?

Jonathan,
The Color LaserJet 2800 series is NOT support under Snow Leopard for anything other then print. You may try installing the 10.5 software to try and get things running again. It can be obtained [here|http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp? lang=en&cc=us&prodTypeId=18972&prodSeriesId=445194&prodNameId=445195&swEnvOID=21 9&swLang=8&mode=2&taskId=135&swItem=ly-58934-1], no guarantees it will work though.
Just trying to help.
Andrew

Hp color laserjet 4730mfp series

how can i scanning and save the photos to my computer by HP Color LaserJet 4730 series ?

According to the spec sheet for the Laserjet 4700n printer, this printer only has these methods of connectivity. Unfortunately, wireless printing is not mentioned.
Laserjet 4700n connection methods:
Enhanced input/output (EIO) card slots for optional connectivity. (Network connection using an HP Jetdirect embedded print server is standard on HP Color LaserJet 4700n, HP Color LaserJet 4700dn, HP Color LaserJet 4700dtn, and HP Color LaserJet 4700ph+ printers.)
USB 2.0 connection.
HP Jetdirect embedded print server to enable network connectivity without requiring use of an EIO slot.
Standard bidirectional parallel cable interface (IEEE 1284-C compliant).
Auxiliary connector.
Both USB and parallel connections are supported, but cannot be used at the same time.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

HP Photosmart 3210 installed on my iMac But is showing as but is showing as HP Color Laserjet 2800 series PS which means I no longer have access to all the paper options especially the photo tray

I have recently purchased an iMac running Lion. The HP Photosmart 3210 printer was connected through the network and I was happy that it recognised the printer - good old Mac's!!
However, when I tried to print some of my photos from the photo tray, the option was not available and when I looked at the printer properties, it was showing as a HP Color LaserJet 2800 Series PS which does not have all the paper options I had before. Reinstalling the software from HP did not make any difference - do I now have to buy a new printer as well???

I suggest opening the Print & Scan System Preferences, then highlight your HP Photosmart printer in the printers list and delete it by pressing the minus sign. Now, re-add the printer by clicking on the plus sign and select the printer. Make sure that the 'Print Using:' pull down aut selects the correct driver for your printer. If it doesn't, pull down the list and manually select the correct driver using the 'Select Printer Software' option. Hopefully that will resolve your issue.
HP Printer Support for Mac OS X

Printer driver for an HP LaserJet 1000 series for use with Windows 7

The CD ROM HP LaserJet 1000 series printer driver is not recognized by my new Windows 7 PC. So the printer does not work. I've looked on the HP web site for compatible drives and get the hint that a Vista driver would work. Can someone please confirm if this possible and how this is accomplished? Thanks.

Where did you find a hint that Vista drivers would work? This page says:
Your LaserJet model is not supported in Windows 7.
For more information regarding upgrade programs and new product information, please visit the HP Trade-In/Trade Up website at www.hp.com/united-states/tradein/home_flash.html or directly from HP at www.hp.com .
Additionally, this page says the Laserjet 1000 is not supported in Vista.
If you are using the 32 bit version of Windows 7 it may be possible to download the XP drivers here and install them.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Is there a univeral printer driver for HP Color LaserJet CM1312 MFP on Windows 7 64 bit?

I had bought a HP Color LaserJet CM1312 Multifunction Printer last year - up to now I could print out via the computer of my doughter (Windows XP), but now this computer is bugged and I would like to be able to use also my own Windows 7 64 bit Computer. Unfortunately the "Full solution" does not work at all, while there also appears to be no Universal Printer Driver for my special printer. In other words: I can´t use the printer and I am upset (HP at its best?).
Is there any way to get a printer driver that does what it is supposed to do?
Despaired...
MKunst

Have you tried downloading and installing the drivers from here?
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18...
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!!

HT1338 I'm trying to follow HP's instructions to add a driver for HP Color Laserjet CP 1215 which is connected to my Time Capsule. However, in System Preferences I can't "add" the printer to the print queue because I don't have a driver and you have to se

I’m trying to follow HP’s instructions to add a driver for HP Color Laserjet CP 1215 which is connected to my Time Capsule. However, in System Preferences I can’t “add” the printer to the print queue because I don’t have a driver and you have to select a driver before the add button becomes active. Therefore, the Mountain Lion software update doesn’t add driver software for the CP 1215 driver because I was unable to add the printer to the print queue.

This printer doesn't seem to be supported in ML:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01664444&lc=en&cc=us&dlc=en &product=412187#N2043
You could try the 1515 driver or use the Generic PostScript Printer PPD when adding the printer.
Hope this helps.

Very slow printing Illustrator CS3 to HP Color Laserjet 3600

Howdy!
OS X 10.5.8 G5 dual 2.0. Printer is connected via Ethernet. I've created new printers using Bonjour, IP address, and HP IP printing under Other...
Illustrator hangs upwards of ten minutes with a beachball at the "Printing Page:" window, before the file shows up in the print queue.
Illustrator is printing fine to all my other printers, (hp Deskjet & 2 Epson Pro 4000's) and all my other apps print to the HP Color Laserjet 3600 nice and speedily. If I reboot, it takes about 45 seconds on the first print, then back to 10 + minutes, after that.
Happens with any Illustrator file. I've created several new files, both RGB and CMYK. Acrobat will print these files nice and speedily. I can place them in InDesign, and it prints them nice and speedily.
CS2 also hangs in the same fashion.
Any thoughts?
Thanks!

I don't know if this is related, but...
My MacBook Pro (Airport) has always been dicey connecting to an HP LaserJet 4000 on my wired LAN. Before Snow Leopard, I used AppleTalk rather than IP printing because it just worked.
But Snow Leopard doesn't support AppleTalk any more, so I reinstalled the printer to connect via JetDirect (which supposedly provides more features). When it works, it works fine. But very often I get a message that it can't connect to the printer. The only thing I've found that fixes the problem is power-cycling the printer, which somehow enables queued jobs to print. Needless to say, this gets old.
Is there some trick I'm missing?

Fuser error for HP Color LaserJet 3600 Series Printer

Similar Messages

Maybe you are looking for