Fusion 11 Planning migration error
Hi,
1). After copying the planning schema from the old env to the new env (blank planning app already created+css migrated using new utility). Running a Refresh for the first time (with or without the security box checked), causes the dimension level planning security to be wiped out. The Planning web shows nothing and the relevant tables show nothing. Any ideas?
2) The number of tables in 9.2 planning app schema are different from the Fusion 11 schema. A schema import would cause a shortage of tables for Fusion 11. Is this a concern?
Env:
Windows 2k3 System 9.2 to Fusion 11.1.2
Thank you.
Eric.
Thanks for the response.
On first login, I can see all metadata and the migrate button as well. I used it and it was all good. The dimension security gets wiped on first Refresh (with or without the security box checked).
Steps followed:
1. Created Blank App in Fusion env. with new schema/data source
2. Dropping all objects on the target schema and importing the source objects.
3. Migrated Essbase objects via migration utility.
4. Restarting services.
5. Registering Shared Services.
6. logging in and 'migrating' to new version
7. Verify all metadata, forms, dim security exists.
8. Refresh (with and without security filter checked).
9. Login again to check metadata. All intact except dim security.
Any suggestions?
Similar Messages
-
Hyperion Planning migration error while refreshing/creating Essbase cube
Hi,
I'm migrating a Hyperion Planning application (11.1.1.4) to a complete other environment (due to the split of the companies). I have read most post on otn, but unfortunately nothing that helped me to solve the issue, yet... I hope someone can help me. Thanks in advance!
I have executed the following steps:
1. Create a new Oracle database
2. Create a datasource to the Oracle database and to Essbase (both tested succesfully)
3. Create a fresh planning application (I have used a native Admin account and not the original owner)
4. Go into the database tables for the planning app and look at table HSP_USERS, store the SID value against user 50001
5. Go into the database planning system tables and HSPSYS_APPLICATION, clear out the version field for the application you have created - I did not do this since I could not delete this value. null is not accepted.
6. Stop Planning
7. Restore the planning application database over the one created in the first step (I had to drop the existing tables first)
8. Go into the HSP_USERS table and update the SID for user id 50001
9. Start planning
10. Log on to planning and I did see the webforms, etc as expected.
11. Now, when I try to refresh the database, I receive an error:
Cube refresh/create in progress
Status failed
Step 4 Adding dimensions
java.lang.NoSuchMethodError: getAttributeType
Does anyone has an idea? Hope someone can help me since the deadline is getting closer and closer.
Thanks!
Kind Regards
MartinHi John,
Thanks for your reply.
I have exactly done what you have described. I droped the schema and recreated it with an impdp to import.
But, in the meantime I have been investigating the dimensions and there's indeed something very wrong. Some dimensions have been mixed up. In the 'old' environment I have 10 stored dimensions and 4 attribute dimensions (as well as in EAS as in Planning, offcourse as you expect). In the 'new' environment, two stored dimensions have been mixed up with two attribute dimensions.... How is that possible?
I have never seen that. Could this be caused by the reason that we use a different version of Oracle (11G release 2 vs 10G (10.2.0.4))? Or went something wrong with exporting the schema...? Can you tell me what I can do to investigate this?
Thanks!
Kind Regards,
Martin -
Hello, We are on Hyperion 11.1.1.3. We have 2 environments QA and PROD. We have migrated from QA to PROD just by coping the oracle db's for those apps manually. We tried using LCM but stuck with some issues and avoided that. Oracle user id's are same in prod appwizard so, When we migrated the Oracle DB's, and tried to login, we are getting an error "failed to sync with user provisioning. Please check the log for details"
I understand to run a ProvisionUsers.cmd utility to over come this. But when we are running this utility, we are getting an error "[Hyperion][Oracle JDBC Driver][Oracle]ORA-01400: cannot insert NULL into ("EPM11_JF"."HSP_USERSINGROUP"."USER_ID")]
How should I over come this?
Also I can able to login into Shared Services and created a native user to test. I can able to login into planning apps with that userid.
Another issue with the native user is, we have 3 planning apps, when tried to give provision to these apps, I am able to expand selection and select, "Planner"/"Admin" but am unable to expand other applications in Shared services to give provisioning. What could be the reason for this.
Any help is greatly appreciated.
Thanks,If you are using the migration of the schema method you need to be sure you are following the steps correctly.
Create a blank planning application on your target (if you have not already got one)
Stop planning web app on the target
Drop/recreate the oralce schema for the target planning application.
Migrate the schema from source oracle planning app to target.
If the application owner for source/target is the default admin account then you don't need to worry, if it is any other native user then you will have to update the SID (search this forum for 50001 and you will find lots of information)
run the updateusers utility to sync the rest of the users.
Cheers
John
http://john-goodwin.blogspot.com/ -
MII 14.0 SP4 :Migration error while importing SAP BM Templates
Hi Experts,
I am facing some migration errors while importing SAP Batch Manufacturing Templates into MII 14.0 SP4.
There are almost 23 transactions which are not getting imported and the error message for all of them is-
"Unable to migrate transaction Unable to import file
<Name of the Transaction>"
Any first hand experiences will be really helpful for me to proceed further.
Regards,
Muddassar KhanHi All,
Got the solution. The STARTUP.BAT file is been placed in the installation directory(usr/sap) and then it works fine. Also I have installed the patches and all working fine.
Any way thanks for the answer christian libich.
Regards
G.Partheeban -
Creating maintenance plan "MaintenancePlan" (Error)
Hello, I get the error
Creating maintenance plan "MaintenancePlan" (Error)
when I try to create a maintenance plan. I checked and the Microsoft Web site and
other forums said it may be that integration services is not installed so I tried installing it
and it said that it is already installed.
The accompanying messages with the report are:
ADDITIONAL INFORMATION:
The connection type "ADO.NETQL" specified for connection manager "{C72T6E0B-6CE7-4138-A8D9-BFE8897900700}" is not recognized as a valid connection manager type. This error is returned when an attempt is made to create a connection manager for an unknown connection type. Check the spelling in the connection type name.
(MaintenancePlan)
The connection type "ADO.NETQL" specified for connection manager "{C72CT60B-6CE7-4138-A8D9-BFE8897900700}" is not recognized as a valid connection manager type. This error is returned when an attempt is made to create a connection manager for an unknown connection type. Check the spelling in the connection type name.
(MaintenancePlan)
- Adding tasks to the maintenance plan (Stopped)
- Adding scheduling options (Stopped)
- Adding reporting options (Stopped)
- Saving maintenance plan "MaintenancePlan" (Stopped)Sharp,
Do you still need help with this?
Thank you!
Ed Price, Power BI & SQL Server Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it! -
Planning Provider Error in Smartview 9.3.1.5.0.025
Hello all,
When I retrieved large amounts of data in Planning Ad-hoc using SmartView and Workspace, I got "Planning Provider Error".
EPM 9.3.1.5.0.025
Win XP prof 2002 Serv Pack 3
Please advise, thanks!
Smartview error:
http://i.imgur.com/bVCLz.jpg?2989
Workspace error:
http://i.imgur.com/n5Cbr.jpgThis type of error usually means the the xml being returned by your provider is not the expected type or is malformed. What provider are you hitting and can you tell me the url you are using? Also it the provider and older or newer version than the Smart View client?
-
Migration Error from Access to Oracle through SQL Developer.
Hi,
Actually I am trying to migrate data from MS Access 2002 to Oracle 9i database through the SQL Developer. But Whenever I go to Capture Database from Access it will show me an error.... Invalid procedure Call and then it shows an error message... >>>>>>
ShowSplashScreen("_OracleSplashScreen",3)
after that i wont be able to do this task anymore..... So please help me get out of it... How Cam I Maigrate data from Access to Oracle 9i...
Is any other tool i use or you can help me for this tool to migrate date...
Please tell me..
If yu can send me a mail then mail me on [email protected]
regards,
VishalHi Vishal,
I have responded to your related thread on the Migration Workbench forum - Migration Error from Access to Oracle through SQL Developer.
Regards,
Hilary -
BPS Marketing-Planning RFC-Error when Using summation
Hi Together,
we're using BPS for planning Marketing-Costs. The BPS-Layout is Included in a CRM 7.0 WebUi, and we're able
to plan Marketing-Costs.
The Layout is defined as keyfigures in data-columns, rows are defined individually.
If I add an extra Summation row and/or an extra summation column I'm getting an RFC Error
in the WebUi.
Has anyone an idea why summations causes such an error?
Kind regards
Larswhenever I go to "Planinng" tab for an Opportunity, I get the below error. I guess I may have to do some Planning Services Setting.
Error in planning services
Planning Services Error
Error messages - count 0001:
Planning area does not exist -
BPS Flat file load ABAP objects migration error.
Hello
We are trying to load a flat file via the SAP-GUI and BPS and everything works well in DEV based on the HOw-TO guide. When trying to move the ABAP objects to QA, we get a migration error on the type /1sem/_yth_data_260ZBYAPEPL. Of course the 260ZBYAPEP is relevant to our configuration and in QA we do have the equivalent structure /1sem/_yth_data_614ZBYAPEPL.
How come the type in DEV does not translate to the equivalent type in QA just like any objects we transport to QA?
Thank you all.
YB.Dear YB,
the element /1sem/_yth_data_260ZBYAPEPL has to be changed according to the QA manually only. Sytem can't change the clent no. automaticaaly when u transport to the QA.
so in /1sem/_yth_data_260ZBYAPEPL replce 260 with ur QA Client no.
Narendra Reddy -
Planning - Recieving errors during configuration process
Hello,
We are currently installing System 11.1.1.1 using Weblogic 9.2 MP1. We have successfully installed and configured Shared Services, Workspace and Essbase. We have installed Planning but I keep recieving errors during the configuration process. The following errors are logged in the configtool_err.log file:
Feb 10, 2009, 07:18:10 AM), com.hyperion.cis.config.wizard.adapter.WizardFormAdapterPanel, ERROR, The specified database is already configured.
(Feb 10, 2009, 07:19:59 AM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Error happen while trying to get Planning system DB info from registry.
(Feb 10, 2009, 07:30:10 AM), com.hyperion.cis.config.servers.WlsAppServer, ERROR, WebLogic Admin server has not started after about 10 minutes.
(Feb 10, 2009, 07:30:12 AM), com.hyperion.planning.HspDBConfigurator, ERROR, HP-9.5.0 product is not registered.
(Feb 10, 2009, 07:30:13 AM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Deployment failed. Admin server doesn't started.
(Feb 10, 2009, 07:41:35 AM), com.hyperion.cis.config.servers.WlsAppServer, ERROR, WebLogic Admin server has not started after about 10 minutes.
(Feb 10, 2009, 07:41:35 AM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Deployment failed. Admin server doesn't started.
(Feb 10, 2009, 07:50:05 AM), com.hyperion.planning.HspDBConfigurator, ERROR, HP-9.5.0 product is not registered.
Any thoughts or information would be much appreciated.
Thanks
TonyHi,
What O/S are you installing on?
Is it possible you can try and break down the configuration of planning.
So only have Shared Services / Open Ldap Services running, make sure you can log into shared services console
Run the configurator, choose planning > Configure Database (are you using a seperate database for each product, I am finding it helps with installations)
If you are select the "Perform 1st Time configuration of Database" - Chose Drop and re-create tables"
If successful move on to the configure - Deploy to application Server.
Cheers
John
http://john-goodwin.blogspot.com/ -
Hello,
In Planning Ad-hoc using SmartView, when I retrieve large amounts of data I get "Planning Provider Error". I looked at the logs and WebLogic Admin Server console and it seems Planning is running out of Heap memory during huge retrivals. I added statup attributes to Planning Application server through WL Admin Server console to Xms1024m -Xmx1024m -XX:MaxPermSize=1024m but still got the same issue. I also noticed that even after restarting the Planning service, the Admin console still shows as max available 512m. I even restarted the WL Admin server but no luck.
I am sure a lot of you would have optimized the WL. Am I doing the steps right? Should I be doing something differently? Where can I check to see if the changes were implemented?
EPM 11.1.2.1
Win 2003 64bit
Server memory 8GB
Thank you!If you are starting up the planning app server using a windows service then you would need to update the JVM max in the registry, they will be under HKLM\SOFTWARE\Hyperion Solutions\Planning0\HyS9Planning
If you are just trying to retrieve large amounts of data you could try connecting to essbase instead of going through the planning layer, this should hopefully improve the retrievals.
Cheers
John
http://john-goodwin.blogspot.com/ -
Hi,
I am trying to migrate to OATM on my 11.5.9.2 apps before upgrading to R12.
OATM migration progress report is showing
Total No. Commands Commands % completion
of commands in error in success of migration
80,180 5 80,037 99.82%
When i checked for the errors, it is showing below error report.
Migration Error
AMR AMR_GMD_SAMPLES_N2 INDEX X
ORA-01950: no privileges on tablespace 'APPS_TS_TX_IDX'
AMR AMR_GMF_LOT_COST_DETAILS_N1 INDEX X
ORA-01950: no privileges on tablespace 'APPS_TS_TX_IDX'
APPLSYS WF_LOCAL_USER_ROLES TABLE HZ_PARTY
ORA-12801: error signaled in parallel query server P001
ORA-01578: ORACLE data block corrupted (file # 445, block # 195035)
ORA-01110: data file 445: '/u01/orauat/uatdata/uat/applsysd14.dbf'
ORA-26040: Data block was loaded using the NOLOGGING option
Please help.
Thanks,> Migration Error
> ------------------------------------------------------------------------------------------------------------------------------------
> AMR AMR_GMD_SAMPLES_N2 INDEX X
> ORA-01950: no privileges on tablespace 'APPS_TS_TX_IDX'
Please run this command and see if it helps.
SQL> alter user AMR quota unlimited on APPS_TS_TX_IDX;
ORA-01950 Error While Executing Initial Build of Opportunities and Leads Bins [ID 309664.1]
ORA-01950 AND ORA-06512 TRYING TO OPEN PERIOD [ID 1058205.6
> APPLSYS WF_LOCAL_USER_ROLES TABLE HZ_PARTY
> ORA-12801: error signaled in parallel query server P001
> ORA-01578: ORACLE data block corrupted (file # 445, block # 195035)
> ORA-01110: data file 445: '/u01/orauat/uatdata/uat/applsysd14.dbf'
> ORA-26040: Data block was loaded using the NOLOGGING option
Workflow Tables: ORA-01578: ORACLE data block corrupted ORA-26040: Data block was loaded using the NOLOGGING option [ID 416476.1]
How Block Corruption of Workflow Tables Can Cause Self Service Login Not to Work [ID 435523.1]
During a Backup, WF_LOCAL_ROLES Is Showing Corrupt Block [ID 369535.1]
Partitions in Workflow Local Tables are Automatically Switched to NOLOGGING [ID 433280.1]
Thanks,
Hussein -
Dump opening planning book - error "CNTL_ERROR"
Hi Experts,
One of our users is experiencing the Dump while opening the planning book - error "CNTL_ERROR".
I found a similar thread but that is for version SCM 7.0.
Can somebody suggest the GUI patch or a consulting note for SCM 4.1.
Link for scm 7.0 = Re: Short dump in /sapapo/sdp94 Transaction
Thanks a lot.
Regards,
chandanHI,
To solve the issue apply the note 1279860.
This note will correct the error.
Regards,
Sunitha -
Planning Migration from Development Server to Testing Server
Hi All,
I am doing migration from development env to testing env. I am stuck in the middle of the migration. Anyone please guide me in this situation. Its very urgent for me. I am following below steps for the planning migration
1. Create a new database on Production RDBMS Server for your planning application.
I created the new database for my planning application.
2. Configure a data source on Production Planning Server.
I configured the new datasource on planning.
3. Create fresh planning application on Production Server and Ensure the admin is the same as your planning application on Development Server.
I created the new planning application on production server. Its working fine with admin login.
4. Go into the database tables for the planning app on Production Server and look at table HSP_USERS; store the SID value against user 50001.
I save the SID value against 50001 in a notepad
5. Go into the database planning system tables on Production Server and HSPSYS_APPLICATION, clear out the version field for the application you have created.
I removed the version for the application i created
6. Stop Planning.
I stopped the planning services
7. Restore the planning application database on Development over the one created in the first step (to the Production Server Database).
In this steps only, i am facing diffculities.
How to take the backup of development database? (Here, i want to the take the database backup of planning application schema or entire oracle databat in development server)
How to restore to testing env database
Please anyone guide me in this situtation. Please......
8. Go into the HSP_USERS table and update the SID for user id 50001
9. Start planning
10. Go to planning web and you should see your application when you try and log in it should take you to a migrate screen.
11. If you are requiring to migrate users as well, you will have to make sure you create them in Shared Services and then use the updateusers utility in the planning bin directory.
Thanks,
LakshmiHi Mars,
Thanks for your reply. I did the same as you specified. I used Imp instead of import, exp instead of export.
7. Restore the planning application database on Development over the one created in the first step (to the Production Server Database).
I restored the Planning dmp here
8. Go into the HSP_USERS table and update the SID for user id 50001
Here, SID remains the same after restore the backup from the development server(SID same for Development and testing Server)
9. Start planning
I started the Planning Services.
10. Go to planning web and you should see your application when you try and log in it should take you to a migrate screen
I am facing problem here.
While login into planning application, its not redirect to migrate screen. Its normally login to the application
Thanks,
Lakshmi -
Hi ,
We are planning to do migration for planning application version 11.1.1.1.3. My question is how many ways we can do planning migration, and which is better way?
Thanks in advance.LCM will migrate all the objects e.g. web forms, task lists etc, it will migrate essbase objects but not data before version 11.1.2
If you use this method you don't have to copy the planning applications relational database.
If you use the relation database copy method it will take all of the planning application across at once, it does not do the essbase side.
Cheers
John
http://john-goodwin.blogspot.com/
Maybe you are looking for
-
Reverse proxy to applications on a server by just domain names possible?
Hi All I am looking for a solution to set up a single server, that hosts four J2EE web applications running on a Glassfish application server with just only one IP address. When a user wants to use an application, he/she can just type URL without spe
-
Unable to share photo iPhone 5c to macbook air
I am using an iPhone 5c on iOS 8.3 and a mackbook air. I am trying to clear some space on my phone and trying to take some photos off and add them to my macbook. Ive tried to use photos, iPhoto, iTunes, photo sharing, dropbox and email but all I get
-
Why can't I delete this audio clip or unlink it?
Please see uploaded screenshot. The soundtrack here is a continuous clip of music but I have snipped it to coincided exactly with the video clip above, and I've also snipped the Audio 1 clip at the same place. There's nothing above, ie all other tr
-
Today I ran across an issue on my work computer where the tabs would not close. Normally, I would just close the browser and hope it fixes itself, but on my work computer I run a program in the browser that i should not close. Or, at least, it would
-
Airport Utility windows update from 5.1.0 to 5.2.1 will not update
I have airport utility installed. whenever I open it, I get a message that tells me an update 5.2.1 is avail. I do so but I receive a message that just states that I must have 5.1 installed (which I do) and just errors out. I am running win XP pro. I