Fusion Absence Status stuck 'In Progress'

Hi !
I'm trying to complete a full cycle of recording an absence.
I've created the accrual plan, the absence type and enrolled employees in accrual plan.
At employee level I added an absence ( of the type created before ) and is stuck in status 'In progress'.
In the Absence Type, section 'Display features' I selected the options as below.
My questions:
1. Where and how these Display Features can be used ? for 'Approval Processing' Employee level 'Enabled' does it mean that the Employee can select the Approver ?
2. What is the maening of 'In progress' status ?
regards,
Gabriela

Similar Messages

Content Status Stuck "In Progress"

I had this error before, and installing the hotfix http://support.microsoft.com/kb/2828900/en-us fixed the issue. However, last week the issue returned. At the time, nothing
had changed. I have since installed CU4, then CU5. These servers are updated monthly, but had not yet updated when this began.
When viewing the Content Status, the Status is “Waiting for Content.” However, in the Asset Message Summary, the description is “Distribution Manager successfully processed package…”
OSD task sequences are now not able to complete due to the Configuration Manager Client Package being in the same state (due to the CU5 client update).
Deployments such as Programs and Updates are completing successfully.
Interestingly, I was able to distribute NEW content (SP1 CU5 - x64 client update) to a Distribution Point Group (which includes 4 of 13 DP’s). So maybe this issues only applies
to REDISTRIBUTING content.
PkgXferMgr.log does not show anything unusual
Distmgr.log shows a recurring attempt to update a package which was removed and subsequently redistributed for testing purposes, but other entries appear to process normally.
Found package properties updated notification for package 'KS100005'
Sleep 30 minutes...
Found notification for package 'KS100005'
Package 'KS100005' (priority 1) is already in queue.
Used 1 out of 7 allowed processing threads.
Package 'KS100005' is found in active queue, will try it later
Sleep 1753 seconds...
Sleep 30 minutes...
My configuration:
Windows Server 2008 R2 SP1
SCCM 2012 SP1 CU5
SQL Server 2008 R2 SP1
1 Primary Site and 12 Distribution Points
Original Install Date: 4/13/2012
I have Googled the following and read most results on the first two pages:
In progress - Waiting for Content
Package (priority 1) is already in queue
Package is found in active queue, will try it later
distribution manager successfully processed package waiting for content
The content status of a package is stuck in "In progress - Waiting for Content" status in System Center 2012 Configuration Manager SP1
Maybe someone has some fancy PowerShell or SQL commands I can run. (My SQL skills are limited).
Jamie

Thanks Torsten. I've read many of your successful replies over the years, and now you're answering one of my questions! Actually, the first question since I've usually found the answer.
Yes, I have redistributed the packages that are giving the inaccurate status messages.
To get a current log, I redistributed the configmgr client (KS100002). The description now reads "Distribution Manager created snapshot for content Configuration Manager Client Package successfully." However, the Content Status is still "Waiting for
Content - In Progress."
distmgr.log
Taking package snapshot for package KS100002 from source \\svsccm1.nazdar.com\SMS_KS1\Client
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:53:50 PM
1184 (0x04A0)
Set share security on share \\svsccm1.nazdar.com\SCCMContentLib$
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:53:50 PM
1184 (0x04A0)
Sleep 30 minutes... SMS_DISTRIBUTION_MANAGER
7/24/2014 1:53:54 PM 6492 (0x195C)
Found package properties updated notification for package 'KS100005'
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:00 PM
3520 (0x0DC0)
Found notification for package 'KS100005' SMS_DISTRIBUTION_MANAGER
7/24/2014 1:54:05 PM 3520 (0x0DC0)
Package 'KS100005' (priority 1) is already in queue.
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:05 PM
3520 (0x0DC0)
Used 2 out of 7 allowed processing threads.
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:05 PM
3520 (0x0DC0)
Package 'KS100005' is found in active queue, will try it later
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:05 PM
3520 (0x0DC0)
Sleep 3600 seconds... SMS_DISTRIBUTION_MANAGER
7/24/2014 1:54:05 PM 3520 (0x0DC0)
The size of package KS100002, version 11 is 187015 KBytes
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:06 PM
1184 (0x04A0)
CreatePackageSignature() called for Package KS100002 with version 11 with source as '\\?\UNC\svsccm1.nazdar.com\SMS_KS1\Client'. KeepUnpackedSignature = 1
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:06 PM
1184 (0x04A0)
Successfully created RDC signatures for package KS100002 version 11
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:10 PM
1184 (0x04A0)
Set share security on share \\svsccm1.nazdar.com\SCCMContentLib$
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:10 PM
1184 (0x04A0)
Creating hash for algorithm 32780 SMS_DISTRIBUTION_MANAGER
7/24/2014 1:54:14 PM 1184 (0x04A0)
The hash for algorithm 32780 is EF26808AB6F9B0291F4E0999BB09F90DA9AAEF3C334BF681A0D8CAAC226C5A39
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:14 PM
1184 (0x04A0)
The RDC signature hash for algorithm 32780 is 9DF7DE9375172B8E07724E5985B5D2142839AC135D7ABE6F246203E89FA6AD00
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:14 PM
1184 (0x04A0)
STATMSG: ID=2376 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=svsccm1.nazdar.com SITE=KS1 PID=7472 TID=1184 GMTDATE=Thu Jul 24 18:54:14.344 2014 ISTR0="KS100002" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8=""
ISTR9="" NUMATTRS=1 AID0=400 AVAL0="KS100002"
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:14 PM
1184 (0x04A0)
CDistributionSrcSQL::UpdateAvailableVersion PackageID=KS100002, Version=11, Status=2376
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:14 PM
1184 (0x04A0)
The source for package KS100002 has changed or the package source needs to be refreshed
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:14 PM
1184 (0x04A0)
Adding these contents to the package KS100002 version 11.
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:14 PM
1184 (0x04A0)
The Package Action is 1, the Update Mask is 32 and UpdateMaskEx is 0.
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:14 PM
1184 (0x04A0)
Use drive C for storing the compressed package.
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:14 PM
1184 (0x04A0)
Set share security on share \\svsccm1.nazdar.com\SCCMContentLib$
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:14 PM
1184 (0x04A0)
Successfully created/updated the package KS100002
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:19 PM
1184 (0x04A0)
STATMSG: ID=2311 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=svsccm1.nazdar.com SITE=KS1 PID=7472 TID=1184 GMTDATE=Thu Jul 24 18:54:19.703 2014 ISTR0="KS100002" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8=""
ISTR9="" NUMATTRS=1 AID0=400 AVAL0="KS100002"
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:19 PM
1184 (0x04A0)
Set share security on share \\svsccm1.nazdar.com\SCCMContentLib$
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:19 PM
1184 (0x04A0)
Set share security on share \\SVWSTSCCM1.nazdar.com\SCCMContentLib$
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:21 PM
1184 (0x04A0)
Set share security on share \\SVTEISCCM1.nazdar.com\SCCMContentLib$
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:25 PM
1184 (0x04A0)
Set share security on share \\svsccm1.nazdar.com\SCCMContentLib$
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:27 PM
1184 (0x04A0)
Set share security on share \\SVPENSCCM1.nazdar.com\SCCMContentLib$
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:28 PM
1184 (0x04A0)
Set share security on share \\SVMICSCCM1.nazdar.com\SCCMContentLib$
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:34 PM
1184 (0x04A0)
Set share security on share \\SVMIASCCM1.nazdar.com\SCCMContentLib$
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:36 PM
1184 (0x04A0)
Set share security on share \\SVMEXSCCM1.nazdar.com\SCCMContentLib$
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:41 PM
1184 (0x04A0)
Set share security on share \\svmansccm1.nazdar.com\SCCMContentLib$
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:50 PM
1184 (0x04A0)
Set share security on share \\SVGSISCCM1.nazdar.com\SCCMContentLib$
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:57 PM
1184 (0x04A0)
Set share security on share \\SVGRNSCCM1.nazdar.com\SCCMContentLib$
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:54:59 PM
1184 (0x04A0)
Set share security on share \\SVCINSCCM.nazdar.com\SCCMContentLib$
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:55:03 PM
1184 (0x04A0)
Set share security on share \\SVCHISCCM1.nazdar.com\SCCMContentLib$
SMS_DISTRIBUTION_MANAGER 7/24/2014 1:55:06 PM
1184 (0x04A0)
Sleep 30 minutes... SMS_DISTRIBUTION_MANAGER
7/24/2014 2:23:59 PM 6492 (0x195C)
pkgxfermgr.log- no activity

Leave with approval status ''Work in progress''

Hi,
I try to delete or complete the leave with approval status ''Work in progress'' and there is no way to do that .. can anybody help .
This issue happened when i request annual leave and the session expired .. i login again and i found the request stuck at absence summary and i can't do any thing even deleting.
snapshot of the issue:
http://www.2shared.com/photo/B2F8Aysg/work_in_progress_leave.html
Thanks in advance

Hi,
Yes i know its not should be disabled at site level i did that on test envroment .
i tried to put it at user but its not possible
after i put the profile on value 'Yes' the delete and update columns appeared at absence summary with warning massege and i can delete the Leave with approval status ''Work in progress'':
http://www.2shared.com/photo/QqRfjReY/Warning_mass-2.html
and when i try to create new leave gave this error massege:
http://www.2shared.com/photo/LL1sU9xB/Warning_mass-1.html
can you guide me how can i know the earlier personalization done on the absence page ??
thaks alot for your helping

My Process status is in progress but all the subprocess are completed

Hi,
I have a problem, i started a process with 4 subprocess. One of the Subprocess didn't finish its activity and it's status remain "in progress".
In the context data of subprocess i didn't see any information. Now if i try to suspend or cancel it i get this error message:
Error during the process.Number and instance Id's of the processes which can not be suspended
how can i delete it from Process istance?

I tried to suspend or cancel the process but i can't do it.
the system told me the error in the first post.
if i go in the history of process i have this log:
10-gen-2011 16.10.42 Application result Web service operation taskRun of interface http://test.com/test/#BPM has completed successfully Application
10-gen-2011 16.10.42 Current user temporarily changed to "Identity changed to user <service user>." System
10-gen-2011 16.10.42 Data object updated Data object ProcessContext has been updated Data flow
10-gen-2011 16.10.42 Current user temporarily changed to "Identity changed to user SAP_BPM_Service." System
10-gen-2011 16.10.42 Application launched Web service operation taskRun of interface http://test.com/test/#BPM has been called successfully Application
10-gen-2011 16.10.42 Application result Web service operation getTaskKey of interface http://test.com/test/#BPM has completed successfully Application
10-gen-2011 16.10.42 Current user temporarily changed to "Identity changed to user <service user>." System
10-gen-2011 16.10.42 Data object updated Data object ProcessContext has been updated Data flow
10-gen-2011 16.10.42 Current user temporarily changed to "Identity changed to user SAP_BPM_Service." System
10-gen-2011 16.10.42 Application launched Web service operation getTaskKey of interface http://test.com/test/#BPM has been called successfully Application
10-gen-2011 16.10.42 Process initiated Processo 'New Pool 0' iniziato Control flow
10-gen-2011 16.10.42 Data object created Data object TextVariables has been created Data flow
10-gen-2011 16.10.42 Data object created Data object Administrators has been created Data flow
10-gen-2011 16.10.42 Data object created Data object Auto_PotentialOwners has been created Data flow
10-gen-2011 16.10.42 Data object updated Data object ProcessContext has been updated Data flow
10-gen-2011 16.10.42 Data object updated Data object Auto_ExcludedOwners has been updated Data flow
10-gen-2011 16.10.42 Data object updated Data object ErrorHandle_PotentialOwners has been updated Data flow
10-gen-2011 16.10.42 Data object updated Data object ErrorHandle_ExcludedOwners has been updated
with no error, but for now the subprocess still in progress and it's don't finish.

Workflow: Even if PO is released the log shows status as 'In Progress'

Dear All,
I have created custom workflow for PO approval procedure. I have 3 step approval process and have specified same User ID as agent to all 3 levels. Now I am facing below issues in my workflow
1) It is getting triggered twice, I have specified only one start condition as RELEASESTEPCREATED, why is this happening?
2) If I execute the workflow from SWBP for release, even after release of PO the step shows status as 'In Progress' in SWIA, its not going to complete status. Hence not going to next step.
Please guide me on the above issues.
Thanks and Regards,
Aniket

If you are using standard Workflow WS20000075 on releasing the PO a notification workitem is ent to the Initiator which displays the PO. On executing this workitem the workflow instance get completed. This is a standard solution if you need to change it then copy it and customize it accordingly.
Thanks
Arghadip

How long it takes to repair an Apple iPad with the error "sim card not detected". The ipad is in Apple since 19 January and still has the status "Repair in Progress".

How long it takes to repair an Apple iPad with the error "sim card not detected". The ipad is in Apple since 19 January and still has the status "Repair in Progress".

There is no way any fellow user here can know anything specific about your repair status. You will need to call Apple and ask them yourself.

How to remove the Planned leave from the LOV of Absence status? Only confirmed leave should be listed. for 11i instance.

Hi Gurus,
How to remove the Planned leave from the LOV of Absence status? Only confirmed leave should be listed. for 11i instance.
Thanks
Shobhit Shukla

Hi Shobhit,
Please personalize the self-service page and make that field non-updatable with default value "Confirmed".
Thanks,
Avinash

How can we restrict the absence status (Which are not yet to be approved)in team calendar(MSS)

How can we restrict the absence status (Which are not yet to be approved)in team calendar(MSS)

Hi user570596,
I think there is no method to actually restrict the date picker popup, but you can use the ApexLib Framework (http://apexlib.sourceforge.net/) to define a min/max value for your date field. This will prevent the user from submitting the page when the date value is outside the defined range.
See http://inside-apex.blogspot.com/2007/03/min-max-value-validation-in-browser.html
for details.
Patrick
Check out my APEX-blog: http://inside-apex.blogspot.com
Check out the ApexLib Framework: http://apexlib.sourceforge.net

HT4623 update stuck in progress bar while restoring ios 7

iphone 4s restoring ios 7.0.4 tried 20 times and keep getiing error 14 and stuck on progress bar help please ??
if needed i well post error log

It's updated to the newest version.

Deployment status shows stuck in progress, no advertisement or package ID in any client log

I am trying to deploy an applications to a remote machine. The application is distributed to the DPs and has been successfully deployed to at least one computer on the LAN. The deployment status for the machine is stuck on the In Progress
tab, Category as In Progress.
The content has not downloaded to ccmcache, and I can't find any reference to the application or package ID in any of the logs. I don't know what to look at next that might help. Any help is much appreciated! Thanks,
Jeff

How about locationservices.log? It runs through this every 10 minutes, which is both more often and quite different from what I see in my laptop's locationservices.log (granted I'm on the LAN).
Refreshed security settings over AD
LocationServices
12/3/2014 3:50:06 PM    5160 (0x1428)
No security settings update detected.   LocationServices
12/3/2014 3:50:06 PM    5160 (0x1428)
Retrieved MP [oursccmprimary] from Registry   LocationServices
12/3/2014 3:50:06 PM    5160 (0x1428)
Attempting to retrieve lookup MP(s) from AD    LocationServices
12/3/2014 3:50:06 PM    5160 (0x1428)
Lookup Management Points from AD:   LocationServices
12/3/2014 3:50:06 PM    5160 (0x1428)
Name: 'oursccmsecondary.ourdomain.lan' HTTPS: 'Y' ForestTrust: 'N'
LocationServices
12/3/2014 3:50:06 PM
5160 (0x1428)
Name: 'oursccmprimary.ourdomain.lan' HTTPS: 'N' ForestTrust: 'N'
LocationServices
12/3/2014 3:50:06 PM
5160 (0x1428)
Retrieved lookup MP(s) from AD
LocationServices
12/3/2014 3:50:06 PM    5160 (0x1428)
Attempting to retrieve default management points from lookup MP(s) via HTTPS
LocationServices
12/3/2014 3:50:06 PM    5160 (0x1428)
Current AD site of machine is OurADsite
LocationServices
12/3/2014 3:50:06 PM    5160 (0x1428)
Default Management Points from MP: LocationServices
12/3/2014 3:50:07 PM    5160 (0x1428)
Name: 'oursccmprimary.ourdomain.lan' HTTPS: 'N' ForestTrust: 'Y'
LocationServices
12/3/2014 3:50:07 PM
5160 (0x1428)
Name: 'oursccmsecondary.ourdomain.lan' HTTPS: 'Y' ForestTrust: 'Y'
LocationServices
12/3/2014 3:50:07 PM
5160 (0x1428)
LSUpdateInternetManagementPoints   LocationServices
12/3/2014 3:50:07 PM    5160 (0x1428)
Current AD site of machine is OurADsite
LocationServices
12/3/2014 3:50:07 PM    5160 (0x1428)
Internet Management Points from assigned MP:
LocationServices
12/3/2014 3:50:07 PM    5160 (0x1428)
Name: 'oursccmsecondary.ourdomain.lan' HTTPS: 'Y' ForestTrust: 'Y'
LocationServices
12/3/2014 3:50:07 PM
5160 (0x1428)
LSUpdateInternetManagementPoints: Successfully refreshed internet MPs from MP oursccmsecondary.ourdomain.lan.
LocationServices
12/3/2014 3:50:07 PM    5160 (0x1428)
Persisting the default management points in WMI
LocationServices
12/3/2014 3:50:07 PM    5160 (0x1428)
Default Management Points from MP: LocationServices
12/3/2014 3:50:07 PM    5160 (0x1428)
Name: 'oursccmprimary.ourdomain.lan' HTTPS: 'N' ForestTrust: 'Y'
LocationServices
12/3/2014 3:50:07 PM
5160 (0x1428)
Name: 'oursccmsecondary.ourdomain.lan' HTTPS: 'Y' ForestTrust: 'Y'
LocationServices
12/3/2014 3:50:07 PM
5160 (0x1428)
Persisted Default Management Point Locations locally
LocationServices
12/3/2014 3:50:07 PM    5160 (0x1428)
Attempting to retrieve local MPs from the assigned MP LocationServices
12/3/2014 3:50:07 PM    5160 (0x1428)
Current AD site of machine is OurADsite
LocationServices
12/3/2014 3:50:07 PM    5160 (0x1428)
Current AD site of machine is OurADsite
LocationServices
12/3/2014 3:50:07 PM    5160 (0x1428)
Current AD site of machine is OurADsite
LocationServices
12/3/2014 3:50:07 PM    5160 (0x1428)

Absence request status = "Work in Progress" ?? in SSHR

Hi exprts
we tried to post an absnece request (ex. holiday). The status is set to "Work in Progress". The approver is also nominated. But he did not get the request for approval.
Question: What can be the reason.
Now if w click on yellow pencile for update and submit it the approver will get the notification, and the status is set to "Pending for Approval".
Question: Have somebody facing this issue, and what is your suggestion.
Thx
mehdi

Solution:
1. You request for holiday, than cliking on Next -next, Next.
2. before submit you are clicking on Home button
3. A message window appear(the changes you mad.......)
4. Click on Ok
4. Comming back to your Summary page and you see: The Approval Status is set to Work in Progress and Absnece status is set to confirmed. In this case you must sendyour request again.
That was the reason and solution.
Mehdi

SCCM 2012 R2 Configuration Manager Client Package - stuck "In Progress"

Hi Team; I’m having 2 issues with SCCM 2012 R2:
Issue 1: I'm having a strange issue with the default XXX00002 package - "Configuration Manager Client Package",
it will not deploy to the Secondary Site DP. The console is saying "In Progress" - below is the output from the
distmgr.log file.
~Package BDC00002 does not have a preferred sender.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.443+240><thread=6032 (0x1790)>
~CDistributionSrcSQL::UpdateAvailableVersion PackageID=BDC00002, Version=1, Status=2301
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.444+240><thread=6032 (0x1790)>
~StoredPkgVersion (1) of package BDC00002. StoredPkgVersion in database is 1.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.462+240><thread=6032 (0x1790)>
~SourceVersion (1) of package BDC00002. SourceVersion in database is 1.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.462+240><thread=6032 (0x1790)>
~Package BDC00003 does not have a preferred sender.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.443+240><thread=6092 (0x17CC)>
~CDistributionSrcSQL::UpdateAvailableVersion PackageID=BDC00003, Version=1, Status=2301
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.464+240><thread=6092 (0x17CC)>
STATMSG: ID=2301 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BBK-SCCM-PRI.bbk2310.com SITE=PRI PID=2768 TID=6032 GMTDATE=Mon Mar 17 20:00:23.476 2014
ISTR0="Configuration Manager Client Package" ISTR1="BDC00002" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="BDC00002"
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.477+240><thread=6032 (0x1790)>
StateTable::CState::Handle - (2301:1 2014-03-17 20:00:23.476+00:00) >> (0:0 2014-02-28 16:33:45.383+00:00)
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.484+240><thread=6032 (0x1790)>
CStateMsgReporter::DeliverMessages - Queued message: TT=1401 TIDT=0 TID='8ACCAE01-5079-4FCD-A988-C1CD3004B698' SID=2301 MUF=0 PCNT=2, P1='PRI' P2='2014-03-17 20:00:23.476+00:00' P3='' P4=''
P5='' $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.495+240><thread=6032 (0x1790)>
~StoredPkgVersion (1) of package BDC00003. StoredPkgVersion in database is 1.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.496+240><thread=6092 (0x17CC)>
~SourceVersion (1) of package BDC00003. SourceVersion in database is 1.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.497+240><thread=6092 (0x17CC)>
STATMSG: ID=2301 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BBK-SCCM-PRI.bbk2310.com SITE=PRI PID=2768 TID=6092 GMTDATE=Mon Mar 17 20:00:23.510 2014
ISTR0="Configuration Manager Client Upgrade Package" ISTR1="BDC00003" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400
AVAL0="BDC00003" $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.510+240><thread=6092 (0x17CC)>
StateTable::CState::Handle - (2301:1 2014-03-17 20:00:23.510+00:00) >> (0:0 2014-02-28 16:33:45.383+00:00)
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.515+240><thread=6092 (0x17CC)>
CStateMsgReporter::DeliverMessages - Queued message: TT=1401 TIDT=0 TID='8ACCAE01-5079-4FCD-A988-C1CD3004B698' SID=2301 MUF=0 PCNT=2, P1='PRI' P2='2014-03-17 20:00:23.510+00:00' P3='' P4=''
P5='' $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.526+240><thread=6092 (0x17CC)>
CStateMsgReporter::DeliverMessages - Created state message file: D:\Program Files\Microsoft Configuration Manager\inboxes\auth\statesys.box\incoming\1sfb1dbj.SMX
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.571+240><thread=6032 (0x1790)>
Successfully send state change notification 8ACCAE01-5079-4FCD-A988-C1CD3004B698
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.572+240><thread=6032 (0x1790)>
~Exiting package processing thread.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.574+240><thread=6032 (0x1790)>
CStateMsgReporter::DeliverMessages - Created state message file: D:\Program Files\Microsoft Configuration Manager\inboxes\auth\statesys.box\incoming\abaibh8y.SMX
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.637+240><thread=6092 (0x17CC)>
Successfully send state change notification 8ACCAE01-5079-4FCD-A988-C1CD3004B698
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.683+240><thread=6092 (0x17CC)>
~Exiting package processing thread.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.685+240><thread=6092 (0x17CC)>
Sleep 30 minutes...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:26.886+240><thread=2936 (0xB78)>
~Used 0 out of 3 allowed processing threads.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:27.948+240><thread=4900 (0x1324)>
~Sleep 3600 seconds...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:27.950+240><thread=4900 (0x1324)>
Sleep 30 minutes...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:31.934+240><thread=2936 (0xB78)>
~Used 0 out of 3 allowed processing threads.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:33.021+240><thread=4900 (0x1324)>
~Sleep 3600 seconds...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:33.023+240><thread=4900 (0x1324)>
~Used 0 out of 3 allowed processing threads.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:38.108+240><thread=4900 (0x1324)>
~Sleep 3600 seconds...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:38.111+240><thread=4900 (0x1324)>
Sleeping for 60 minutes before content cleanup task starts.~
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:06:28.094+240><thread=4968 (0x1368)>
Sleep 30 minutes...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:30:52.271+240><thread=2936 (0xB78)>
Sleep 30 minutes...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 17:01:10.002+240><thread=2936 (0xB78)>
~Used 0 out of 3 allowed processing threads.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 17:01:10.977+240><thread=4900 (0x1324)>
~Sleep 3600 seconds...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 17:01:10.979+240><thread=4900 (0x1324)>
Sleeping for 60 minutes before content cleanup task starts.~
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 17:06:55.337+240><thread=4968 (0x1368)>
Issue 2: I'm trying to deploy a couple of Packages/Applications using SCCM 2012 R2 running on Win2K8 R2 with no luck, knowing that I could install the packages
on a test VM “in the DataCenter site”, but when trying to deploy the packages to production PC “in the Office Site”,
the status is packages deployment compliance stuck at 0%
Infrastructure:
3 SCCM servers: CAS, PRI & SEC. Both CAS and PRI are in the DataCenter site, and SEC is in the Office site. The office site has several IP subnets.
Boundaries are configured through Forest Discovery “IP Ranges and AD Sites” since that the AD site should contain all the IP subnets that the AD site contains, Boundaries groups are also configured and a site reference
server is configured for each group respectively.
A OU based Collection has been configured that contains 13 PC "the collection contains the PCs that the packages should be installed.
Packages/Applications are configured correctly since that I could successfully deploy the packages to the test VM which is on the same subnet as the CAS and the PRI servers "the DataCenter subnet". The issue
is that I can't deploy the packages to production PCs in the Office subnet!
Firewall rules are configured and applied via GP, and I even turned Windows Firewall off, and still nothing! I tried to manually initiate Computer Policy download via the SCCM GUI and via a script, still no luck!
I tried configuring IP Subnet Boundaries, still no luck!!
Here are the last 2 lines in the LocationServices.log of a client PC at the Office Site:
<![LOG[MPLIST requests are throttled for 00:00:44]LOG]!><time="14:47:00.766+240" date="03-17-2014" component="LocationServices" context="" type="2" thread="5776"
file="lssecurity.cpp:4528"> <![LOG[Current AD site of machine is Default-First-Site-Name]LOG]!><time="14:47:00.777+240" date="03-17-2014" component="LocationServices" context="" type="1"
thread="4884" file="lsad.cpp:770">
And here are the last 4 lines in the ClientLocation.log
<![LOG[Rotating assigned management point, new management point [1] is: BBK-SCCM-PRI.bbk2310.com (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState"
Value="0"/></Capabilities>]LOG]!><time="14:49:04.880+240" date="03-17-2014" component="ClientLocation" context="" type="1" thread="3600" file="lsad.cpp:6311">
<![LOG[Assigned MP changed from <BBK-SCCM-PRI.bbk2310.com> to <BBK-SCCM-PRI.bbk2310.com>.]LOG]!><time="14:49:04.891+240" date="03-17-2014" component="ClientLocation" context="" type="1"
thread="3600" file="lsad.cpp:1532"> <![LOG[Rotating proxy management point, new management point [1] is: BBK-SCCM-SEC.bbk2310.com (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState"
Value="0"/></Capabilities>]LOG]!><time="14:49:05.345+240" date="03-17-2014" component="ClientLocation" context="" type="1" thread="3600" file="lsad.cpp:6374">
<![LOG[Rotating local management point, new management point [1] is: BBK-SCCM-SEC.bbk2310.com (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>]LOG]!><time="14:49:05.786+240"
date="03-17-2014" component="ClientLocation" context="" type="1" thread="3600" file="lsad.cpp:6436">
It looks like clients in the Office Site can’t connect to the DP/MP of the Secondary Site server which is also a DP.
While on the PC that the application was installed on I see the folowing in the LocationService.log:
<![LOG[Distribution Point='http://BBK-SCCM-PRI.bbk2310.com/SMS_DP_SMSPKG$/Content_69547d2a-339f-4ac4-9523-238c79ff8a52.1', Locality='LOCAL', DPType='SERVER', Version='7958', Capabilities='<Capabilities SchemaVersion="1.0"><Property
Name="SSLState" Value="0"/></Capabilities>', Signature='http://BBK-SCCM-PRI.bbk2310.com/SMS_DP_SMSSIG$/Content_69547d2a-339f-4ac4-9523-238c79ff8a52.1.tar', ForestTrust='TRUE',]LOG]!><time="14:42:59.506+240"
date="03-17-2014" component="LocationServices" context="" type="1" thread="224" file="lsutils.cpp:415"> <![LOG[Calling back with locations for location request {144620BC-4BF0-4878-9554-F67D305ECCF8}]LOG]!><time="14:42:59.522+240"
date="03-17-2014" component="LocationServices" context="" type="1" thread="224" file="replylocationsendpoint.cpp:220">
Is there something wrong with the Distribution point on the Secondary Site server?
Please help…
Thanks..

Update:
I fixed the issue with the default XXX00002 package - "Configuration Manager Client Package", it will not deploy to the Secondary Site DP. I did that through "Update Distribution Points" option, and after a while the status was 100%.
However; the second issue is still unsolved...
Please help..

Workflow status is "In Progress"

Hi ,
I have created a workflow which is attached to custom list. Problem with this workflow is , sometimes workflow does not update
status of the workflow in the list.
All tasks associated with workflow are completed but status in list is shown as “In Progress” instead of completed.
Workflow: state machine workflow
Environment: Sharepoint2013
Anyone faced this issue or know about the solution , please share the solution.<o:p></o:p>
Regards,
Sujeet

Hi,
According to your description, my understanding is that sometimes your state machine workflow status still stuck on "In Progress" when all the tasks has completed.
The steps in a state machine workflow execute asynchronously. This means that they are not necessarily performed one after another, but instead are triggered by actions and states. In this case, the workflow status may have not been refreshed.
I suggest you can wait for some time and refresh the page to see if the status has changed.
If the issue still exists, I suggest you can check if the workflow has executed the completed state also can track the execute steps with debugging.
Here are some detailed articles for your reference:
Creating SharePoint Workflow Solutions
How to Debug a workflow with Visual Studio
How To... Create and debug a state machine workflow
Thanks
Best Regards,
Jerry Guo
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Software Update status stuck in Unknown Client check passed/Active

I've been rooting around in this for a week now so I'm looking for some other ideas.
A couple of weeks back I tried publishing some updates from SCUP into SCCM. Shortly thereafter I started seeing all my client getting stuck in Unknown "Client check passed/Active" status for Software Updates, starting with my most recent Software
Update Groups and progressively creeping its way back into older ones.
Clients' WUAHandler.log show errors with <![LOG[OnSearchComplete - Failed to end search job. Error = 0x8024000f.]LOG]!><time="18:16:20.329+240" date="08-14-2014" component="WUAHandler" context="" type="3"
thread="2496" file="cwuahandler.cpp:3064">
Client WindowsUpdate.log shows the same error code: 2014-08-15 11:37:16:278 520 1b7c Agent WARNING: WU client failed Searching for update with error 0x8024000f.
I also have one of my older deployments starting to pick up a status of Error, code 0X8024000F "Circular update relationships were detected in the metadata."
I found some folks with similar issues where they were advised to remove the offending updates from their packages. I never got the SCUP updates into any packages; they were showing up as Metadata Only and I started troubleshooting this issue instead. At this
point I have removed everything from SCUP showing in SCCM console just to make sure. (I think I expired them all in SCUP and then synced with it again.)
I have tried several client-side fixes that have not resolved the issue (KB971058, rebuild the SoftwareDistribution folder, KB947821).
I have even uninstalled the WSUS role off my server, restarted, then reinstalled. SCCMw ill sync happily with WSUS and received this week's updates successfully but it cannot pull a status for these new updates and all the existing ones still sit in Unknown
status in their deployments. I tried creating a new small deployment and it still gets stuck in the same place.
It looks like my Software Updates metadata in SCCM is a mess and I'm not sure how to resolve it. I think the next step I can think of is to strip the SUP role off the server and pop it back in after its had some time to clean itself up. Does anybody have
any other less severe suggestions?

Hi,
There is someone remove all the third-party metadata in WSUS Database, then run full sync and initiated scan cycle on the machine. The client successfully scanned updates.
But editing database directly is unsupported by Microsoft.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Workflow Timer Job Is Stuck( 0% Progress and Running Continuously )

We are facing strange issue in sandbox. Workflow timer job in central admin (CA) is getting stuck.workflow time interval is 2 minutes.
It supposes to run for every two minutes. But it stuck after the start. It is not resume (or) complete the job. It is showing 0% progress and running status.
We need to restart the SharePoint2010 Timer Service to restart the timer job.
When we restart the “SharePoint 2010 Timer”, Workflow timer job gets re started. But again it is stuck.
So whenever we need to run workflows I need to restart the “SharePoint 2010 Timer” service.
I have re created my site collection and delete the local list (which has workflow association).
But Workflow timer job in CA not resumed (or) completed.
Are there any options to reset the workflow timer job? Is there any way to clear state of workflow timer job?

i have got same problem in my SharePoint Server
for Microsoft SharePoint Foundation Usage Data Import,
Config Refresh
workflow
so i have read most of notes.
Clearing the cache is the best resolving part for this.
To resolve this issue, clear the file system cache on all servers in the server farm on which the Windows SharePoint Services Timer service is running. To do this, follow these steps:
Stop the
Timer service. To do this, follow these steps:
Click Start, point to Administrative Tools, and then click Services.
Right-click SharePoint 2010 Timer services, and then clicks Stop.
Close the Services console.
Navigate to the directory:C:\ProgramData\Microsoft\SharePoint\Config
\GUID.
Backup the GUID folder
Back up the Cache.ini file. (Make a copy of it. DO NOT DELETE THIS FILE, Only the XML files in the next step)
Delete all the XML configuration files in the GUID folder (DO NOTE DELETE
THE FOLDER). Do this so that you can verify that the GUID folders content is replaced by new XML configuration files when the cache is rebuilt. Note when you empty the configuration cache in the GUID folder; make sure that you do NOT delete
the GUID folder and the Cache.ini file that is located in the GUID folder.
Double-click the Cache.ini file.
On the Edit menu, click Select All.
On the Edit menu, click Delete.
Type 1, and then click Save on the File menu. (Basically when you are done, the only text in the config.ini
file should be the number 1)
On the File menu, click Exit.
Start the Timer service. To do this, follow these steps:
Click Start, point to Administrative Tools, and then click Services.
Right-click SharePoint 2010
Timer, and then click Start.
Close the Services console.
Note The file system cache is re-created after you perform this procedure. Make sure that you perform this procedure on all servers in the server farm.
Make sure that the Cache.ini file in the GUID folder now contains its previous value. For example, make sure that the value of the Cache.ini file is not
1.
Check in the GUID folder to make sure that the xml files are repopulating. This may take a bit of time.
Deepesh Yevle - MCTS MCITP

Fusion Absence Status stuck 'In Progress'

Similar Messages

Maybe you are looking for