Fusion SDK Installation

Hello
Where Can I get the Fusion SDK jars and its dependencies.
Regards
Kristi

Hi
This is the project in Fusion Middleware. Fusion LCM SDK will leverage the Fusion Security solution in EM. This is not a project to invent new technology, simply to take existing and emerging security technologies and lay out a diagram for how they could be used to enable common lifecycle activities, such as Patching and Provisioning an Apps System, in EM. The LCM SDK will then be extended to act as an intermediary between functional application teams and the underlying technologies.

Similar Messages

Android SDK Installer

I am interested in doing some game development using Basic4Android. To do so, I need to install Java and the Android SDK.
I have installed Java 7. The following software is installed on my laptop:
Java 7 Update 7 (64-bit) Version 7.0.70
Java SE Development Kit 7 Update 7 (64-bit) Version 1.7.0.70
I then access and download the Android SDK Installer, which I am told is currently this file:
installer_r20.0.3-windows.exe
Upon running this installer, the Android SDK Tools Setup starts, which then tries to detect whether the Java SE Development Kit is installed.
I then get the following error:
Java SE Development Kit (JDK) not found.
Error: Failed to find Java version for 'C:\Windows\system32\java.exe': [2] The system cannot find the file specified.
It also says I should go to java.oracle.com to download and install the JDK.
There is a "java.exe" file in the C:\Windows\system32 folder with the date when I installed Java 7.
The file that I did download and run to install Java was
jdk-7u7-windows-x64.exe,
leading me to have the installed Java software mentioned above.
Can you tell me what I may be doing wrong? I am running Windows 7 Home Premium SP1 (64-bit) on an ASUS Laptop with an i5 dual core processor.
Thank you for any help you provide.
Addendum: I solved this problem. The instructions for Basic4Android say to install the 32-bit JDK, not the 64-bit JDK.
Bob
Edited by: AndroidDev on Oct 13, 2012 5:17 AM
Edited by: AndroidDev on Oct 13, 2012 6:12 AM

I solved my problem. The instructions for Basic4Android say to install the 32-bit version of Java, not the 64-bit version.

SDK installation integration

My company is distributing an open tools package using Eclipse.
We would like to integrate the Sun SDK installation into our installer.
Is there any way to do this?
A URL I could point at perhaps that would start the SDK download process and bring up the licensing agreement?
thx,
NZG

The download URL's vary by Java version - see http://java.sun.com , and look in the Popular Downloads box at the right.

CM SDK installation

We have Oracle Database running on a solaris box along with Oracle Application Server 10g. Now I want to install CM SDK, where do I do that? Do I need to do it on a seperate box? Or can I do the installation on the same box?
Further I want to know the steps involved in CM SDK installation.

Hi!
You most definitely can install it on the same machine.
The steps for the installation are described in the Installation Guide.
cu
Andreas

SDK installation problem

I installed the SAP Business One SDK and it seemed to install fine. However, when I go to add a reference to my .Net project, I do not see the SAP Business One DI API Version 2007 as a COM reference. Is there something else that I need to install? I installed this on my local developer machine which is a Windows 2003 Server machine.
Thank you

Hi,
The SDK installation can be installed separately but the SDK is just the documentation and samples and doesn't include either the DI API or UI API COM objects. The DI API is automatically installed as part of the client installation but can also be installed separately from the B1_SHR shared folder that is created during the server installation.
Kind Regards,
Owen

SDK installer

Acrobat5.0へversion upした後、SDK installerを起動しようとすると、”SDK installerが見つからないので、SDK installerは開けません”と表示されます。

私も同じ症状にあいました。しかし、アドビのWebサイトからダウンロードしたインストーラからはインストールできました。CD内のSDKから起動しているのなら是非試してみてください。

Fusion App installation - Registering OAM policy domain ...

Hi all,
I'm trying to perform Fusion Applications installation (Linux 64, Middleware 11.1.1.5.0, WLS 10.3.6) in a single host environment, without any load balancer..
The installation fails in "Registering OAM policy domain" phase with error "User does not belong to the group that is authorized to perform registration."
I'm able to login as oamadmin to http://vfusion01.mydomain.com:7001/oamconsole with admin's privileges.
Adding oamadmin into OAMAdministrators and OIMAdministrators groups in LDAP didn't help.
Any idea how to continue?
Thanks for support
Daniel F
[edit]OAM Validation/Authorization and Authentication are successful in OAM Test Tool:
[3/2/12 12:21 PM][request][validate] yes
[3/2/12 12:21 PM][response] Authentication scheme : OAMAdminConsoleScheme, level : 2
[3/2/12 12:21 PM][response] Redirect URL : https://vfusion01.mydomain.com:4443/oam/server/
[3/2/12 12:21 PM][response] Credentials expected : 0x4 (form)
[3/2/12 12:21 PM][request][authenticate] yes
[3/2/12 12:21 PM][response] User DN : cn=oamadmin,cn=users,dc=mydomain,dc=com
[3/2/12 12:21 PM][response] SessionID : 29b10d11-ab81-4446-9e86-880db6e5790c
[3/2/12 12:21 PM][response][action] OAM_IMPERSONATOR_USER :
[3/2/12 12:21 PM][request][authorize] yes
[3/2/12 12:21 PM][response][action] OAM_IMPERSONATOR_USER :
[3/2/12 12:21 PM][response][action] OAM_REMOTE_USER : oamadmin
[3/2/12 12:21 PM][response][action] OAM_IDENTITY_DOMAIN : OIMIDStore
[edit]
====================
[echo] Registering OAM policy domain ...
Registering policy file /fusion/faprov/provisioning/provisioning-plan/bootstrap_oam.conf for policy domain provisioning ...
[echoNested] Registering policy file /fusion/faprov/provisioning/provisioning-plan/bootstrap_oam.conf for policy domain provisioning ...
[echo] mode=CREATE
[echo] app_domain=provisioning
[echo] oam_aaa_host=vfusion01.mydomain.com
[echo] oam_aaa_port=5575
[echo] uris_file=/fusion/faprov/provisioning/provisioning-plan/bootstrap_oam.conf
[echo] hostname_variations=vfusion01.mydomain.com:12613,vfusion01.mydomain.com:12614
[echo] oam_admin_server=http://vfusion01.mydomain.com:7001
[echo] oam_admin_username=oamadmin
[echo] -usei18nlogin
[echo] default_authn_scheme=FAAuthScheme
[echo] oam_cache_header=
[echo] logouturi=/oamsso/logout.html
[echo] web_domain=OraFusionApp
[echo] oam_aaa_mode=simple
[echo] log_level=ALL
[echo] max_oam_connections=10
[echo] primary_oam_servers=wls_oam1:10
[echo] oam_ip_validation=0
[echo] oam_idle_session_timeout=900
[echo] oam_version=11
[echo] cookie_domain=mydomain.com
[echo] app_agent_password and oam_admin_password passed in via STDIN
Mar 1, 2012 6:39:01 PM oracle.security.am.engines.rreg.client.oamcfgwrapper.OAMCfgRREGWrapperImpl handleConfig
INFO: Into RREG Wrapper implementation
Enter password: Enter password: Mar 1, 2012 6:39:01 PM oracle.security.am.engines.rreg.client.util.RegClientFusionCfgURIsFileHandler readProtAndPubUrisFromFileAndSet
INFO: Success: URI:[provisioningBootstrap*] is added.
Mar 1, 2012 6:39:01 PM oracle.security.am.engines.rreg.client.util.RegClientFusionCfgURIsFileHandler readProtAndPubUrisFromFileAndSet
INFO: Success: URI:[provisioningBootstrap/.../*] is added.
Your registration request is being been sent to the Admin server at: http://vfusion01.mydomain.com:7001
Mar 1, 2012 6:39:05 PM oracle.security.am.engines.rreg.client.RegController processOamCfgRegistration
SEVERE: Server side error occurred. Specific error messages are:User does not belong to the group that is authorized to perform registration. Registration failed. Try again after verifying the users group.
Mar 1, 2012 6:39:05 PM oracle.security.oam.oamcfg.OAMCfgTool main
WARNING: OAMCFG-60083: OAM Configuration did not complete successfully. Refer log for details
Mar 1, 2012 6:39:05 PM oracle.security.oam.oamcfg.OAMCfgTool main
WARNING: Stack trace::
oracle.security.am.engines.rreg.client.RegController:processOamCfgRegistration() in file RegController.java:771
oracle.security.am.engines.rreg.client.oamcfgwrapper.OAMCfgRREGWrapperImpl:handleConfig() in file OAMCfgRREGWrapperImpl.java:359
oracle.security.oam.oamcfg.OAMCfgTool:main()[2012-03-01T18:39:05.530+01:00] [runProvisioning-install] [NOTIFICATION] [] [runProvisioning-install] [tid: 12] [ecid: 0000JNF5GUy5i^O6yj7i6G1FJuCA000003,0]
[logStatus] STATE=BUILD_ERROR!TIMESTAMP=2012-03-01 18:39:05 CET!TARGET=register-policy-domain!CATEGORY=BUILD_ERROR!DOMAIN=CommonDomain!HOSTNAME=vfusion01.mydomain.com!PRODUCTFAMILY=webgate!PRODUCT=WebGate!TASK=execSecure!TASKID=webgate.WebGate.BUILD_ERROR.register-policy-domain.execSecure!MESSAGE=Process "/fusion/fmw/jrockit-jdk1.6.0_29-R28.2.2-4.1.0/bin/java -jar /fusion/fmw/apps/webtier_mwhome/oracle_common/modules/oracle.oamprovider_11.1.1/oamcfgtool.jar mode=CREATE app_domain=provisioning oam_aaa_host=vfusion01.mydomain.com oam_aaa_port=5575 uris_file=/fusion/faprov/provisioning/provisioning-plan/bootstrap_oam.conf hostname_variations=vfusion01.mydomain.com:12613,vfusion01.mydomain.com:12614 oam_admin_server=http://vfusion01.mydomain.com:7001 oam_admin_username=oamadmin -usei18nlogin default_authn_scheme=FAAuthScheme oam_cache_header= logouturi=/oamsso/logout.html web_domain=OraFusionApp oam_aaa_mode=simple log_level=ALL max_oam_connections=10 primary_oam_servers=wls_oam1:10 oam_ip_validation=0 oam_idle_session_timeout=900 oam_version=11 cookie_domain=mydomain.com" exited with non-zero exit code "1". Input Stream before decrypting for process execution: "j8p+RGsjhPvGQxLt55GQFw==j8p+RGsjhPvGQxLt55GQFw==". Environment variables: "".!DETAIL=Process "/fusion/fmw/jrockit-jdk1.6.0_29-R28.2.2-4.1.0/bin/java -jar /fusion/fmw/apps/webtier_mwhome/oracle_common/modules/oracle.oamprovider_11.1.1/oamcfgtool.jar mode=CREATE app_domain=provisioning oam_aaa_host=vfusion01.mydomain.com oam_aaa_port=5575 uris_file=/fusion/faprov/provisioning/provisioning-plan/bootstrap_oam.conf hostname_variations=vfusion01.mydomain.com:12613,vfusion01.mydomain.com:12614 oam_admin_server=http://vfusion01.mydomain.com:7001 oam_admin_username=oamadmin -usei18nlogin default_authn_scheme=FAAuthScheme oam_cache_header= logouturi=/oamsso/logout.html web_domain=OraFusionApp oam_aaa_mode=simple log_level=ALL max_oam_connections=10 primary_oam_servers=wls_oam1:10 oam_ip_validation=0 oam_idle_session_timeout=900 oam_version=11 cookie_domain=mydomain.com" exited with non-zero exit code "1". Input Stream before decrypting for process execution: "j8p+RGsjhPvGQxLt55GQFw==j8p+RGsjhPvGQxLt55GQFw==". Environment variables: "".!BUILDFILE=/fusion/faprov/provisioning/provisioning-build/webgate-build.xml!LINENUMBER=512![2012-03-01T18:39:05.673+01:00] [runProvisioning-install] [ERROR] [FAPROV-00298] [runProvisioning-install] [tid: 12] [ecid: 0000JNF5GUy5i^O6yj7i6G1FJuCA000003,0] An Error Occured: [[Process "/fusion/fmw/jrockit-jdk1.6.0_29-R28.2.2-4.1.0/bin/java -jar /fusion/fmw/apps/webtier_mwhome/oracle_common/modules/oracle.oamprovider_11.1.1/oamcfgtool.jar mode=CREATE app_domain=provisioning oam_aaa_host=vfusion01.mydomain.com oam_aaa_port=5575 uris_file=/fusion/faprov/provisioning/provisioning-plan/bootstrap_oam.conf hostname_variations=vfusion01.mydomain.com:12613,vfusion01.mydomain.com:12614 oam_admin_server=http://vfusion01.mydomain.com:7001 oam_admin_username=oamadmin -usei18nlogin default_authn_scheme=FAAuthScheme oam_cache_header= logouturi=/oamsso/logout.html web_domain=OraFusionApp oam_aaa_mode=simple log_level=ALL max_oam_connections=10 primary_oam_servers=wls_oam1:10 oam_ip_validation=0 oam_idle_session_timeout=900 oam_version=11 cookie_domain=mydomain.com" exited with non-zero exit code "1". Input Stream before decrypting for process execution: "j8p+RGsjhPvGQxLt55GQFw==j8p+RGsjhPvGQxLt55GQFw==". Environment variables: "".        at oracle.apps.fnd.provisioning.ant.taskdefs.SecureExec.executeTask(SecureExec.java:381)        at oracle.apps.fnd.provisioning.ant.taskdefs.BaseProvisioningTask.execute(BaseProvisioningTask.java:102)        at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)        at sun.reflect.GeneratedMethodAccessor4.invoke(Unknown Source)        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)        at java.lang.reflect.Method.invoke(Method.java:597)        at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:105)        at org.apache.tools.ant.Task.perform(Task.java:348)        at org.apache.tools.ant.taskdefs.Sequential.execute(Sequential.java:62)        at oracle.apps.fnd.provisioning.ant.taskdefs.util.SynchronizedTask.executeInternal(SynchronizedTask.java:286)        at oracle.apps.fnd.provisioning.ant.taskdefs.util.SynchronizedTask.executeTask(SynchronizedTask.java:318)        at oracle.apps.fnd.provisioning.ant.taskdefs.BaseProvisioningTask.execute(BaseProvisioningTask.java:102)        at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)        at sun.reflect.GeneratedMethodAccessor4.invoke(Unknown Source)        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)        at java.lang.reflect.Method.invoke(Method.java:597)        at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:105)        at org.apache.tools.ant.Task.perform(Task.java:348)        at org.apache.tools.ant.taskdefs.Sequential.execute(Sequential.java:62)        at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)        at sun.reflect.GeneratedMethodAccessor4.invoke(Unknown Source)        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)        at java.lang.reflect.Method.invoke(Method.java:597)        at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:105)        at org.apache.tools.ant.Task.perform(Task.java:348)        at org.apache.tools.ant.taskdefs.MacroInstance.execute(MacroInstance.java:391)        at net.sf.antcontrib.logic.ForDelegate.doSequentialIteration(ForDelegate.java:228)        at net.sf.antcontrib.logic.ForDelegate.doTheTasks(ForDelegate.java:281)        at net.sf.antcontrib.logic.ForDelegate.execute(ForDelegate.java:214)        at net.sf.antcontrib.logic.For.execute(For.java:167)        at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)        at sun.reflect.GeneratedMethodAccessor4.invoke(Unknown Source)        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)        at java.lang.reflect.Method.invoke(Method.java:597)        at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:105)        at org.apache.tools.ant.Task.perform(Task.java:348)        at org.apache.tools.ant.Target.execute(Target.java:357)        at org.apache.tools.ant.Target.performTasks(Target.java:385)        at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1329)        at org.apache.tools.ant.helper.SingleCheckExecutor.executeTargets(SingleCheckExecutor.java:40)        at org.apache.tools.ant.taskdefs.Ant.execute(Ant.java:416)        at org.apache.tools.ant.taskdefs.CallTarget.execute(CallTarget.java:106)        at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
        at sun.reflect.GeneratedMethodAccessor4.invoke(Unknown Source)

First of all WLS 10.3.6 is not certified for FA and OAM 11.1.1.5. Second oamadmin must belong to the OAMAdministrators group and registered as a system administrator for the User Identity Store.
See the IDM EDG (FA edition) for more details. (http://docs.oracle.com/cd/E25054_01/fusionapps.1111/e21032/toc.htm)
HTH,
--olaf

OAM sdk installation guide

Can anyone please suggest oam sdk installation guide which i can refer for installation and will be easy to understand for newbies

Hi,
Details on installing the 11g Java ASDK can be found in the Developer Guide here: http://docs.oracle.com/cd/E27559_01/dev.1112/e27134/as_api.htm#BABEDJEH
Regards,
Colin

Cold fusion 9 Installation on Windows server 2008 (IIS 7.0) - IIS websites not working ?

I am having a 64 bit machine on which windows server 2008 R2 is installed. IIS 7.0 is configured and running on it. on which I have my organisations main website. I have to install Cold fusion on this machine as some of my site pages are designed with CF.
I used all the default settings for installing cold fusion 9. It got completed succefully. But after I restarted my system and tried accesing my ASP.net website it was not loading the page. Text getting displayed was only as follows '<script> src="'. Later I unsistalled CF and my site was working fine.
Please can any one guide me to successfully install Cold fusion without disturbing my main site deployed on IIS ?

Sarfarajms, I don't recognize what about the CF install would conflict with ASP.NET, but I'll note this:
If you downloaded CF 9 recently, you are still running 9.0--which does NOT formally support IIS 7. If you followed the steps about enabling IIS 6 compatibility and such (in the install guide or some blog entry), perhaps that caused the conflict.
Instead, you will want to install 9.0.1 (CF 9 Updater 1, which is NOT provided in the current 9.0 install). THAT is the first release to formally support IIS 7. And if you read the updater installation guide (http://www.adobe.com/support/documentation/en/coldfusion/901/cf901install.pdf), it discusses how to deal with the upgrade depending on what you had done with respect to IIS, starting at the bottom of its page 8.
Hope that helps.
/charlie

SDK Installation Language - how to select?

Hi,
I'm trying to install the latest version of the J2SE SDK on my windows XP, and I have a problem. My computer O/S is in Japanese (it's my friend's computer), but I want to install the SDK in English. There is no option given at the beginning of the installation; it looks like everything is automatically set to Japanese. Is there an English-only version I can use? Or am I stuck with Japanese?

I'm having the same problem.
When I go to download, my choice is of a multi-language SDK.
During the installation process, there is no opportunity that I can see to set the language.
My computer's OS is Japanese Windows XP. The sdk also defaults to japanese i.e. when I work out of the command prompt window, all my compiler error messages are in Japanese.
How do I select English?

SDK Installation Failed

Hi Guys:
We created an SDK Setup as we do for every Add-On using a separated solution to include, Customer Library, Setup & SDK Setup.
We followed all the stesp we normally do, Change Add-On Name and Executable file, Include Customer Library Conpilation Output and files needed to run Add-On
The Add-On Registration Starts, Goes thru the Setup Wizard and after the Setup Wizard finishes it waits with the hourglass until times out and shows you that SDK Setup Installation failed.
So it does not finishes the Add-On Installation.
I have Created a new VS Solution and create everything from scratch and samething happened.
Does somebody has had the same problem, and found a solution for it.
Thanks
Edel

Hello Edel,
Please make sure the following funcitons in AddOnInstallAPI.DLL have been called:
The installer must handle a command line parameter:
     "RecommendedPathForAddOn" | "PathForAddOnInstallAPI.dll"
You must use the AddOnInstallAPI.dll in your installer!
Mandatory:
EndInstallEx (String, Boolean)
     Call this function at the end of the installation process.
     The boolean parameter allows to indicate success (= True) or failure (= False).
     The function returns an integer value; 0 signals success.
EndUnInstall (String, Boolean)
     Call this function at the end of the uninstallation process.
     The boolean parameter allows to indicate success (= True) or failure (= False).
     The function returns an integer value; 0 signals success.
Actually there is a installer SDK sample and also AddOn Installer Wizard tool available in B1DE:
1.You can refer to SDK sample of AddOn Setup:
<<C:Program FilesSAPSAP Business One SDKSamplesCOM UIVB.NET14.AddOnInstaller>>
2.B1 Installer Wizard in B1DE, How to download.
=>SAP Business One Development Environment Tools
Please pay attention to download the right version for your B1 version and VS .Net
Please refer to help file of B1DE after installation
Start=>All Programs=>SAP Business One=>Development Tools=>Help file
=>Simple Installer
You may refer to the following relevant threads. Or search keyword "Installation" or "Installer" for more.
Regards, Yatsea

Cannot find older flex SDK Installs

Please can someone tell me where i can find the Flex SDK
2.0.1 install.
The documentation here references it, but the FDS 2.0.1
installer is not available.
http://www.adobe.com/support/documentation/en/flex/2/install.html
I tried FTP'ing to the macromedia FTP server looking for
older versions, but i could not login.
If anyone has a link to archived version of the software,
please post.
Note, that i do not want the HotFix 1/2/3 packs, i just need
the 2.0.1 without hotfixes,
Thanks
Mick

You won't find the source .as files which is what it sounds like you are searching for. The SDK distribution has everything compiled and packaged up into libraries. The source is available in the SDK's SVN repository.

IPhone SDK installation problem

Hi All,
I have a problem installing the iPhone SDK.
In the installation process, "Installation Type" page, the page you can choose modules either you want to install or not. I see "iPhone SDK" module is listed, but i couldn't select it, it's greyed out and it is not checked by default. So i had to continue like this, after installation, i couldn't open any iPhone sample code at all. XCode said i don't have iPhone SDK installed.
I downloaded the SDK from ADC days ago.
I upgraded my mac to 10.5.4, also upgraded iTunes to 7.7
are there any other prerequisites?

excuse me i'm quite new to this community.
you mean the iphone sdk can not be installed on apple's own hardware?
is apple switching the focus to x86 architecture? are there any background information that i should take a look at?
appreciate it.

IPhone SDK Installation

Hi
I just downloaded the iPhone SDK, and was about to install. I already have the latest version of XCode installed.
During the installation process, I see that the SDK has some common components that are already present with XCode. Would it be a problem if I try to reinstall these components ?
Or should I select the iPhone SDK component alone and proceed with the install ?
Any suggestions / advice on this would be great.
Regards,
Vinay

XCode 3.0 comes with Leopard.
XCode 3.1 comes with the SDK.
There's a Readme somewhere that tells you about this. It suggests that if you don't want to overwrite your XCode 3.0 then you can specify, during installation, that 3.1 should be installed in a different location.
Whether there's any harm in replacing 3.0 with 3.1 I don't know, but clearly some people are worried enough about it for the parallel installation to be documented.

My J2EE 1.4 SDK installation doesn't work (j2eesdk-1_4_03-windows.exe)

Hi!
I think that this is a very curious case. The preparation of the installation is completely right (it loads the Java(TM) 2 Runtime Environment, extract the files). The first screen appears and I click on next, I agree with the software license and click to go next. In the third screen is where the matter happens, I leave the default Installation Directory (C:\Sun\AppServer) and click on next button but the interface is frozen, not more screens are shown, I can move the mouse and even I can execute perfectly the button Browse, and minimize, maximize and close button but the bottom buttons line doesn't work (Back, Next, Cancel, Help), I have left the screen for hours and nothing happens, I only close the interface without installing the sdk.
I try to install j2eesdk-1_4_03-windows.exe on WIndows XP SP3 (before it was SP2 but I changed to test the install but it doesn't work too), I have installed the Java SE Runtime Environment 6 and Java (TM) Update 12, too I have the Java(TM) SE Development Kit 6 and J2ME Wireless Toolkit 2.2, all of them without problems.
I put a link to my frozen screen [http://img19.imageshack.us/img19/6911/j2ee14sdkinstalattionwi.jpg]
PD: sorry for my bad English.
Edited by: Paco-Spain on Mar 17, 2009 4:55 PM

Hi.
I had same problem on my PC today ...
Try to find and delete two files somewhere in c:\windows\...folders -
productregistry and productregistry.access.tmp

Fusion SDK Installation

Similar Messages

Maybe you are looking for