FUTA Changes Effective 1st July 2011 - Not self Adjusting***Critical

Hello
As we know the FUTA rate was chnaged effective 1st July 2011 from 0.8% to 0.6%(after SUTA offset), we have noticed that currently in the SAP the FUTA contribution is not self adjusting.
As illustrated in below example
OCT 2011 Earnings 2008.13(FUTA paid at old Rate 0.08%-16.07)
NOV 2011 Earnings 2008.13(FUTA paid at old Rate 0.08%-16.07)
After November payroll new FUTA rate has been implemented.SAP calculation as below
DEC 2011 Earnings 7008.13(FUTA paid at new Rate 0.06%-16.07)
Dec calculation = 7000-4016.26= 2983.74*0.006=17.90
As you can see employee has contibuted 50.04(16.0716.0717.90) which is more than the minimum of 42 USD(7000*.006)
Could you please confirm if this is correct behaviour? I remember checkin with BSI back in July and they confirmed that the self adjusting should happen and employee should not contribute more than 42
Can you please confirm
Regards
Ajay

Not sure if this is the same problem, but BSI posted a fix to the FUTA calculation in the tax update bulletin immediately following the one that had the FUTA tax adjustment. We went several weeks without the fix and discovered problems similar to what you describe. In our case we had to apply the subsequent TUB to fix the calculation, and then retro everyone back that had the problem. It was a major pain, but the retro solved it.
We did take care of this all in 2011, so I'm not sure if your cross-year situation adds further complexity.
Jay

Similar Messages

TDS rate changes, effective 1st Oct'09

Dear All,
We are planning to create new TDS codes for New TDS rates which will be effective from 1st Oct.
- Using LSMW to upload the TDS codes
- Not deleting old codes which are already assigned to the master
After updating new tax codes for already posted docs with old codes (not paid), as we are getting 'Inconsistent withholding tax' error during payment run, we have to run program - RFWT0010 to update the new tax codes in the documents.
I have two questions here
1. Is there any better way of making tax rate changes in the system?
2. Is there any standard transaction code for this program as user has to run this after updating TDS codes and we cannot give SE38 access to him?
Regards,
Gangadhar

Hi,
Thanks for your reply.
Firstly, we considered this option. But Surcharge is getting changed(no surcharge in many cases). We are maintaining surcharge rates per each WTX type and we are taking TDS certificate printout quarterly.
As per your suggestion, we have to maintain a new rate in the path given and maintain 0 surcharge for TDS codes on 1st Oct(table - J_1IEWT_SURC1). How do we maintain tax type wise old surcharge rate, if we have to take certifiacte print for Sep quarter in October.
Please clarify.
Regards,
Gangadhar

MASSPOCHANGE: Change Overdeliv. Tol. could not be effected:ME664

Hi,
I am trying to change overdelivery tolerance from 5 to 0 in PO line item (Object BUS2012) thru PO MASS maintenance.
After executing the T.code , system is throwing below messages
     Change Overdeliv. Tol. could not be effected     ME664
     Releases already effected are liable to be reset     06684
     No data changed                                               06022
And Value is not getting changed.
I can change the same thru Tocde ME22 Manually , wondering why system is not changing it thru MASS maintenance.
Regards
Shrey

Resolve thx ...
Actually i did change the screen layout to make overdelivery field enable for data entry.
After that I need to come out of MassPOchange transaction and have to execute it again.
May be system was not referring to changes made in screen layouts
Shrey

Hi i am currently editing clips in premiere pro cc but everytime i go to change the speed not the duration of a clip it will not let me select it - also when i go to effect controls it will not let me select time mapping? please help

Hi i am currently editing clips in premiere pro cc but everytime i go to change the speed not the duration of a clip it will not let me select it - also when i go to effect controls it will not let me select time mapping? please help

savannahp
What version of Premiere Elements and on what computer operating system?
Please review the following that I excerpted from an older post here regarding Adobe's PRE_help comments about Hollywood Effect and mention of
Red Noir. Does any of the following apply to any of what is happening to you.
- Whenever I try to add an effect from the Hollywood Looks menu, it brings up a warning that all my previous effects on that clip will be deleted. However it will let me add those same effects *after* applying Hollywood Looks.
This is because of how the Hollywood Looks are designed to be used. Since these are effect presets (multiple effects in combination) that result in a specific "look"; they are best applied in isolation. If any previous effect is applied and we still allow a Hollywood effect to be applied, we will not be able to see what the effect does clearly. For e.g. if you already have a Gaussian Blur effect applied to your clip, and then we allow you to apply the "Red Noir" Hollywood effect, the fact that the "Reds" in the scenes will be highlighted and the others converted to B/W will not be clearly seen since the content is already blurred out. So any previously applied effects was designed to be removed. This holds good even if you apply a Hollywood look "on top of" another one. The previous one will be replaced. Having said that, you can customize the look further by either tweaking an already applied filter or by adding a newer effect on top. That is the reason you can apply an effect on top of the Hollywood Effects and not vice versa.
Please review and consider and then we can proceed from there if necessary.
ATR

Network Extender problems w/Qwest customers during July 2011

I believe I have found the cause of the Network Extender problems surfacing in July, 2011. I am a customer who has been out of Network Extender usage for two weeks now. Read on....
Unbelievably, almost no one at Qwest, Verizonwireless, or Samsung (NE's manufacturer) has any idea what the cause is and neither Qwest nor Samsung knows that a problem exists at all.
After many hours on the phone to all three companies I finally believe I know the cause of the problem. The cause is an updated firmware revision that was pushed to all Qwest customers who use the Actiontec PK5000 modem/router. They have been pushing it out over the last few weeks, so the symptoms have been rolling rather than happening all at one time.
The latest version of the PK5000 firmware is QAP002-3.60.3.0.9.9 When the customer's modem receives that version update (unbeknownst to them), Network Extender is rendered inoperable... the modem does not recognize the NE is plugged into it and does not provide an IP address. The WAN light goes solid red, the GPS goes magenta and the SYS light goes red.
Because Qwest's PK5000 works fine with the upgrade (i.e. both wi-fi and ethernet connections work fine with my Macintosh MacBook Pro), they have no interest in solving my VerizonWireless problem.
Bottom line is VerizonWireless needs to get a patch created "yesterday" and made available to all Network Extender customers who use the Actiontec PK5000 Qwest modem/router immediately. I live in a rural area and despite the fact I've had a VerizonWireless cell phone for many, many years, I'll be forced into changing cell phone providers soon, as will every other NE user who has lost their NE usage because of this problem.
It boggles my mind that no one has figured this out and provided a patch for the Network Extender. Understandably, Qwest could care less this is happening, since their service is not effected. This is truly VerizonWireless' problem.
Now, what can you do??? Call customer service right now and get technical support. Give them the information above and let them know they need to develop a patch for the Network Extender to work with the new firmware (i.e. operating system) of the Actiontec PK5000 modem. It's only when they hear from a bunch of people that they will step up the urgency to find a solution. Thanks!

OK, what's the deal here. I've been having the same problems. Verizon gave me a new extender and I still have the same problem. The week of July 15th everything went dead. I live in downtown Denver and I still can't get service at my house. My network extender is no longer compatible with the PK5000 modem QWEST issued. Firmware got pushed out? uhh... OK that doesn't mean anything to me. Not my problem, but kudos to the gentlemen who figured that out.. Neither Verizon or qwest seem to not want to take responsibility.
So what's next? is there an extender on the market that is compatible with the infamous PK5000? Evidently, the guys @ Qwest I was on the phone with for 45 minutes seems to think it's some type of high speed low drag, technological phenomenon. I'd like to add that if someone from qwest or verizon tech support reads this, I do not have a land line at my house, I have never had a land line at my house so no I can't go to my desktop and troubleshoot the modem while on the phone. just to reinterate I live in downtown denver I do not have cell coverage at my house, and no it's not my house. Everyone in our area does not have coverage.
I've had verizon for over 10 years now and never had a problem. This is the first and biggest problem I had becasue verizon and qwest decided to "bundle" thier service offering...whatever that means.
I believe I have found the cause of the Network Extender problems surfacing in July, 2011. I am a customer who has been out of Network Extender usage for two weeks now. Read on....
"Unbelievably, almost no one at Qwest, Verizonwireless, or Samsung (NE's manufacturer) has any idea what the cause is and neither Qwest nor Samsung knows that a problem exists at all.
After many hours on the phone to all three companies I finally believe I know the cause of the problem. The cause is an updated firmware revision that was pushed to all Qwest customers who use the Actiontec PK5000 modem/router. They have been pushing it out over the last few weeks, so the symptoms have been rolling rather than happening all at one time.
The latest version of the PK5000 firmware is QAP002-3.60.3.0.9.9 When the customer's modem receives that version update (unbeknownst to them), Network Extender is rendered inoperable... the modem does not recognize the NE is plugged into it and does not provide an IP address. The WAN light goes solid red, the GPS goes magenta and the SYS light goes red.
Because Qwest's PK5000 works fine with the upgrade (i.e. both wi-fi and ethernet connections work fine with my Macintosh MacBook Pro), they have no interest in solving my VerizonWireless problem.
Bottom line is VerizonWireless needs to get a patch created "yesterday" and made available to all Network Extender customers who use the Actiontec PK5000 Qwest modem/router immediately. I live in a rural area and despite the fact I've had a VerizonWireless cell phone for many, many years, I'll be forced into changing cell phone providers soon, as will every other NE user who has lost their NE usage because of this problem.
It boggles my mind that no one has figured this out and provided a patch for the Network Extender. Understandably, Qwest could care less this is happening, since their service is not effected. This is truly VerizonWireless' problem.
Now, what can you do??? Call customer service right now and get technical support. Give them the information above and let them know they need to develop a patch for the Network Extender to work with the new firmware (i.e. operating system) of the Actiontec PK5000 modem. It's only when they hear from a bunch of people that they will step up the urgency to find a solution. Thanks!"

New Service tax mapping effective from April 2011

HI Experts,
Service tax rule has changed wef from 1st April, 2011 on
foreign exchange related transactions. The Notification No 26/2011
Below given are the slabs for calculating the new service tax
Gross amount of currency exchanged % of
service tax on transaction value
Upto Rs.1,00,000/-
0.1% or Rs.25
whichever is higher
From 1,00,000-10,00,000/-
100 and 0.05% on amount between
1,00,000 & 10,00,000/-
Amount exceeding 10,00,000/-
Rs.550 and 0.01% on amount exceeding
Can any one help for mapping this senario or any body implemented the same
Thanks in Advance
Regards,
Ram

Hi,
Note 1435105 - Master note for Indian Budget 2010 for Logistics (MM & SD) - this was the master note for impementing the service tax.
But now as service tax regulations have changed we need not configure the old service tax postings i.e postings to interim service tax accounts.
As and when the service is invoiced directly it can be booked to Service Tax Payable/Receivable accounts, previously the postings were made to Service Tax Payable/Receivable Interim Accounts. Later the amounts of the interim accounts were transferred when the invoice is paid.
Note 1571186 - Changes to Service Tax from Indian Union Budget 2011-2012 - please find the latest note on this.
In the above note there is zip file attached which expalins about the changes to be done and about the old postings.
thanks & regards,
shashi kanth.

After Effects will RAM Preview not in real time

Hi, we have 3 adobe After Effects CC up to date here, we are working on a 60fps project in HD 1080. Nothing crazy.
We have 20 Gigas of ram. Mac OS 10.8.5 octo core 2011. ATI Radeon HD 5870 1024 Mo. SSD disque crucial m500 256 gigas.
We have a lot of problem with Ram Preview. (on every project)
Everything works fine until, we don't know why, the ram preview is getting not realtime, like 30fps or under.
Sometimes purge memory do the trick but not always.
We need to reboot and it works again, but few minutes.
We made a test on CS5 and it works well realtime, but same problem on CS6.
I tried to delete all the preferences to check but no difference.
We are working with nfs network account but i always redirect disk cache to local disk (set to 20 gigas) and also media conformed cache (database and cache)
We are getting mad, it's really hard to work that way, rebooting each time.
Maybe an issue with Global performance cache introduced in CS6 ?
It's not a footage/project issue because the entire project (a blend of tiff, png, prores422) can be played 120 frames/sec without any problem on after CS5, after CS6 (when it works), CC (when it works).
The problem is when working on project, changing layers, adding effects, After CC starts not be slow and not realtime using Ram Preview.
Also, when we are previewing, a lot of ram is not used, it only uses like 20% of the ram.
We hope for a nice patch very soon ....

60 fps is a very high frame rate not usually supported. If your footage is shot at 60i then it is probably 29.97 fps when converted to progressive video. If the footage is actually 60 fps then you will be better off, and by better off I mean more folks and streaming services will be able to view your video at the proper speed.
So my recommendation is to first determine your audience and then set up your comp appropriately. In all my years in the business I have only delivered one high frame rate project and that was 48 fps.
The other thing I would recommend is to optimize your system for AE. That does not necessarily mean throw all your available ram and processors at the app. There are some good recommendations here: Optimizing After Effects Performance

I should get Infinity on 1st July, however...

With Infinity just about to arrive on my door step, I decided, once my Hub 5 arrived, to re-do my wiring from phone to hub to pc.
My PC is up stairs. The only 'phone socket is in the lounge, downstairs. Before hand, I used to run a telephone cable up stairs. Connect the ASDL filter, which the ASDL cable went to my HUB4, next to the PC and used an eithernet cable to my PC.
I've now changed on advice having been told that the phone cable is slow, and I should have my HUB5 downstairs and run an eithernet cable from the HUB5, upstairs to my PC.
All the cabeling was changed, HUB5 tuend blue, so I chacked out my speed.
Before, I used to get 3.84MB from exchange to home, and 2.91MB to the PC (Download speeds).
However, now I get 3.84MB from exchange to home and only 2.43Mb to my PC...!!
I assumed that the new eithernet cable would be faster?
So now it begs the question, does my PC's eithernet socket "thing" work?
Is there anyway I can check to see if it is working?
The only way I can see that I am connected to the internet in any way, is with the "wi-fi" bars on the bottom RHS of my PC. I cannot seem to see anything, suggesting that I have an eithernet cable actually attached to my PC.
Even if I remove the eithernet cable, I still get the same speed of 2.43Mb.
Anyone got any ideas please?
Thanks :-)

Hi GG.
Thanks for reply.
I turned off the Wireless connection (Dissabled it) via the PC's Device Manager/Netrwork adapters/Wireless LAN Card. It's interrsting to compare the two connections.
With WIFI, I get speeds of 130.0Mbps. Without WIFI, I get speeds of 1.0Gbps.
Both according when I view the "Properties" for each one. But this still souldn't count for the drop off of speed from having a 'phone wire running up the stairs, to an eithernet cable running up the stairs.
Surely, the eithernet cable would be faster than a "bog standard" 'phone cable?
And I know you said that a drop off of 0.5Mbps is not so great, but as I'm not going with Infinity until 1st July, it makes a BIG differance to my current speed of 2.43Mbp.
Guess I'll wait untill the 1st to see what's what.
Thanks

How do I get the downloaded music on my iphone to my new home pc and itunes, it took the info from the 1st device but not the 2nd

how do I get the downloaded music on my iphone to my new home pc and itunes, it took the info from the 1st device but not the 2nd

the appletv will not display your movies in folders.
you could change the tags in itunes to include the genre in the "show" field in the "video" tab. this would replicate the view you want, but you will need to tag all your movies to do this.

Can I daisy chain two Thunderbolt displays to the new MacBook Airs (July 2011)?

I have last year's MacBook Air -- probably the best Mac I've ever had and I've had a few. I looked at using multiple displays last year, but the reviews for the major 3rd-party solutions really demonstrate how little is possible.
I see Apple says you can double up on displays for the MacBook Pro (I have a pre-Thunderbolt one unfortunately), what about the new (July 2011) MacBook Airs?
Anyone tried? Anyone know?
(I have a 30" Dell display, but it is, and always has been, very flakey when it comes to connecting to a Mac laptop).

You can thank Intel for that.
The sandy bridge chips all have integrated graphics, and before they were released -- they took nvidia to court claiming they didn't have a "license" to make GPU chipsets for the sandy bridge line. Intel won, and consumers lost.
The solution most manufacturers are using for notebooks is graphics switching (nvidia optimus like technology) -- which basically uses a discreet GPU along side the intel integrated GPU, and switches between the two instantaenously based on the workload and \ or battery life -- this is how the macbook pro's with the ATI gpus work.
Since there isn't enough space physically inside a macbook air for a discreet GPU, and since no company in the world is allowed to make a shared GPU for intel's sandy bridge chipsets -- the only solution is to use the integrated graphics that is in the processors -- Intel HD 3000. Intel basically has the monopoly here...there is no legal solution in the world another company can provide thanks to our wonderful court system
Wanna know the really sad part about the Intel HD 3000 GPU? The Nvidia 320M (the GPU used in the previous model 2010 macbook air -- chip was released to the market in April of last year) actually out performs it in some benchmarks -- that's right, a 1+ year old shared gpu from nvidia outperforms Intel's 2011 integrated graphics.
Intel ***** at graphics, period.
The only other solution I can think of is for you to get the "Echo Express" product from Sonnet:
http://www.sonnettech.com/product/thunderbolt/index.html
It's basically an external bay that will allow you to put a PCIe GPU inside it, and it would then connect via thunderbolt to the macbook air.
You would then use the minidisplayport connectors on the PCIe GPU to connect to the apple displays -- I believe any modern ATI or Nvidia GPU can support up to 3 or 4 external displays.
Unfortunately, sonnet's bay is not released yet, and you'd also have to make sure the PCIe GPU you get supports both thunderbolt AND os x....so yeah, kind of slim pickens right now
EDIT:
So apparently the macbook pros can daisy chain two thunderbolt displays -- Apple has a picture of it on their site:
http://storeimages.apple.com/1867/as-images.apple.com/is/image/AppleInc/MC914_AV 7?wid=1200&hei=1200&fmt=jpeg&qlt=95&op_sharpen=0&resMode=bicub&op_usm=0.5,0.5,0, 0&iccEmbed=0&layer=comp
I just bought a new mac air too...I was gonna get a mbpro but they are just too expensive -- the one I configured was at around 3000$
Wanna know what's lame about using the thunderbolt display with the mac air? So the new mac air has the magsafe connector on one side and the thunderbolt connector on the other -- they're not on the same side like the macbook pro is (see picture) -- so basically the cable is going to have to slack around the back of the macbook air -- who designed that? Must have been smoking some good meth ;p
Message was edited by: NiqueXyZ

Server name change leads to Server.app not being able to add users/groups

I changed the name of my server from vanroodewierda.rna.nl to rna.nl. I recreated my DNS setup (only used on the LAN) and everything works. I do have one problem, though: in Server.app, it is impossible to add/delete users and groups. (Yes, I can use Workgroup Manager, but this situation makes the system less robust, certainly, so it should not persist)
changeip -checkhostname says all is well:
$ sudo changeip -checkhostname
Password:
Primary address     = 192.168.2.66
Current HostName    = rna.nl
DNS HostName        = rna.nl
The names match. There is nothing to change.
dirserv:success = "success"
system log says
Apr 7 12:36:47 rna.nl servermgrd[5046]: servermgr_accounts: got error 5000 trying to auth to local LDAP node
Apr 7 12:36:48 rna.nl servermgrd[5046]: flushing dns cache
Apr 7 12:36:54 rna.nl servermgrd[5046]: servermgr_accounts: got error 5000 trying to auth to local LDAP node
Apr 7 12:36:55 rna.nl servermgrd[5046]: --Module servermgr_devicemgr's response has retain count of 3.
Apr 7 12:36:55 rna.nl servermgrd[5046]: --request was {
Apr 7 12:36:55 rna.nl servermgrd[5046]: --response was {
Apr 7 12:36:55 rna.nl servermgrd[5046]: servermgr_accounts: got error 5000 trying to auth to local LDAP node
Apr 7 12:37:01 rna.nl servermgrd[5046]: nsc_smb XPC: handle_event error : < Connection invalid >
Apr 7 12:37:01 rna.nl servermgrd[5046]: nsc_smb XPC: handle_event error : < Connection invalid >
Apr 7 12:37:27 rna.nl servermgrd[5046]: nsc_smb XPC: handle_event error : < Connection invalid >
Apr 7 12:37:48 rna.nl servermgrd[5046]: -[AccountsRequestHandler(AccountsSystemConfigurationObservation) registerForKeychainEventNotifications]: SecKeychainAddCallback() status: -25297
Apr 7 12:37:48 rna.nl servermgrd[5046]: servermgr_accounts: got error 5000 trying to auth to local LDAP node
Apr 7 12:38:48 rna.nl servermgrd[5046]: servermgr_accounts: got error 5000 trying to auth to local LDAP node
Apr 7 12:41:24 rna.nl servermgrd[5046]: getting service list
Apr 7 12:46:25 rna.nl servermgrd[5046]: No requests in 300 seconds, shutting down
Apr 7 12:48:38 rna.nl servermgrd[148]: -[AccountsRequestHandler(AccountsOpenDirectoryHelpers) openLocalLDAPNodeIfNeeded]: dsLocalLDAP = (null), error = Error Domain=com.apple.OpenDirectory Code=2100 "Connection failed to node '/LDAPv3/127.0.0.1'" UserInfo=0x7f9fc501c950 {NSLocalizedDescription=Connection failed to node '/LDAPv3/127.0.0.1', NSLocalizedFailureReason=Connection failed to the directory server.}
Apr 7 12:48:49 rna.nl servermgrd[148]: servermgr_accounts: noteDirectorySearchPolicyChanged (reopening nodes)
Apr 7 12:48:50 rna.nl serveradmin[156]: --Module servermgr_devicemgr's response has retain count of 3.
Apr 7 12:48:52 rna.nl servermgrd[148]: servermgr_accounts: got error 5000 trying to auth to local LDAP node
Apr 7 12:48:52 rna.nl serveradmin[156]: servermgr_accounts: noteDirectorySearchPolicyChanged (reopening nodes)
Apr 7 12:48:53 rna.nl serveradmin[156]: servermgr_accounts: got error 5000 trying to auth to local LDAP node
Apr 7 12:49:44 rna.nl servermgrd[148]: servermgr_accounts: got error 5000 trying to auth to local LDAP node
Apr 7 12:49:44 rna.nl servermgrd[148]: servermgr_accounts: got error 5000 trying to auth to local LDAP node
Apr 7 12:49:44 rna.nl servermgrd[148]: getting service list
Apr 7 12:50:44 rna.nl servermgrd[148]: servermgr_accounts: got error 5000 trying to auth to local LDAP node
Apr 7 12:53:44 rna.nl servermgrd[148]: No requests in 300 seconds, shutting down
Apr 7 12:56:59 rna.nl servermgrd[422]: servermgr_accounts: got error 5000 trying to auth to local LDAP node
Apr 7 12:57:00 rna.nl servermgrd[422]: flushing dns cache
Apr 7 12:57:03 rna.nl servermgrd[422]: servermgr_accounts: got error 5000 trying to auth to local LDAP node
Apr 7 12:57:04 rna.nl servermgrd[422]: --Module servermgr_devicemgr's response has retain count of 3.
Apr 7 12:57:04 rna.nl servermgrd[422]: --request was {
Apr 7 12:57:04 rna.nl servermgrd[422]: --response was {
Apr 7 12:57:04 rna.nl servermgrd[422]: servermgr_accounts: got error 5000 trying to auth to local LDAP node
Apr 7 12:57:08 rna.nl servermgrd[422]: nsc_smb XPC: handle_event error : < Connection invalid >
Apr 7 12:57:59 rna.nl servermgrd[422]: -[AccountsRequestHandler(AccountsSystemConfigurationObservation) registerForKeychainEventNotifications]: SecKeychainAddCallback() status: -25297
Apr 7 12:58:00 rna.nl servermgrd[422]: servermgr_accounts: got error 5000 trying to auth to local LDAP node
Apr 7 12:58:59 rna.nl servermgrd[422]: servermgr_accounts: got error 5000 trying to auth to local LDAP node
In All messages, I see that the name VANROODEWIERDA.RNA.NL is still used (note: vanroodewierda.rna.nl is an alias in DNS for rna.nl)
4/7/13 1:07:55.037 PM kdc[73]: AS-REQ [email protected] from 192.168.2.86:56402 for krbtgt/[email protected]
4/7/13 1:07:55.046 PM kdc[73]: AS-REQ [email protected] from 192.168.2.86:56402 for krbtgt/[email protected]
4/7/13 1:07:55.048 PM kdc[73]: Client sent patypes: REQ-ENC-PA-REP
4/7/13 1:07:55.048 PM kdc[73]: Need to use PA-ENC-TIMESTAMP/PA-PK-AS-REQ
4/7/13 1:07:55.072 PM kdc[73]: AS-REQ [email protected] from 192.168.2.86:56901 for krbtgt/[email protected]
4/7/13 1:07:55.081 PM kdc[73]: AS-REQ [email protected] from 192.168.2.86:56901 for krbtgt/[email protected]
4/7/13 1:07:55.082 PM kdc[73]: Client sent patypes: ENC-TS, REQ-ENC-PA-REP
4/7/13 1:07:55.083 PM kdc[73]: ENC-TS pre-authentication succeeded -- [email protected]
4/7/13 1:07:55.083 PM kdc[73]: Client supported enctypes: aes256-cts-hmac-sha1-96, aes128-cts-hmac-sha1-96, des3-cbc-sha1, arcfour-hmac-md5, using aes256-cts-hmac-sha1-96/aes256-cts-hmac-sha1-96
4/7/13 1:07:55.083 PM kdc[73]: Requested flags: forwardable
There is one stupid thing I might have done myself that caused this. In WGM in my Machines directory there was a machine called vanroodewierda.rna.nl$, I removed that and replaced it with the same MAC address and the name rna.nl$. Might the following have to do with that?
4/7/13 2:03:57.457 PM kdc[73]: Server not found in database: ldap/[email protected]: no such entry found in hdb
4/7/13 2:03:57.457 PM kdc[73]: Failed building TGS-REP to 127.0.0.1:50170
4/7/13 2:03:57.458 PM opendirectoryd[31]: GSSAPI Error: Miscellaneous failure (see text (Server (ldap/[email protected]) unknown while looking up 'ldap/[email protected]' (cached result, timeout in 1200 sec))
What must I do to correct this? It feels like something should change in the Keychain and/or in Kerberos, but what and how?
Thanks,

@John & MrHoffMan,
thanks for replying.
- I know about the split-horizon DNS, it is by design so that, say, mail.rna.nl on the LAN resolves to the same machine as on the WAN and people can take their laptops anywhere and mail 'just works'.
I tried this in Server.app (last night also). I now changed from rna.nl to rna.nl to vanroodewierda.rna.nl and back to rna.nl. (I did this because a change to the same might be ignored by some services and I wanted to force them). In the system log I notice (esp. the first 4 lines):
Apr 7 18:28:21 rna.nl changeip_certs[5029]: found identity for vanroodewierda.rna.nl in keychain
Apr 7 18:28:21 rna.nl changeip_certs[5029]: certificate for vanroodewierda.rna.nl is not self-signed
Apr 7 18:28:21 rna.nl changeip_certs[5029]: no self-signed identity for the previous hostname 'vanroodewierda.rna.nl' found in keychain
Apr 7 18:28:21 rna.nl changeip_certs[5029]: not generating a self-signed certificate for new hostname 'rna.nl'
Apr 7 18:28:21 rna.nl serveradmin[5034]: servermgr_jabber[N]: Processing changeip request.
Apr 7 18:28:22 rna.nl changeip_mail.py[5035]: Mail Service change IP: old hostname: "vanroodewierda.rna.nl (192.168.2.66)" to: new hostname: "rna.nl (192.168.2.66)"
Apr 7 18:28:22 rna.nl changeip_mail.py[5035]: Mail Service new host/domain/IP settings:
                    mail:postfix:submit_cred:rna.nl:username = "submit"
                    mail:postfix:submit_cred:rna.nl:password = "8OOkDnAXKi8bHYHwft1mWs"
                    mail:postfix:mydomain = "rna.nl"
                    mail:imap:postmaster_address = "[email protected]"
                    mail:postfix:submit_cred:nl:username = "submit"
                    mail:postfix:submit_cred:nl:password = "8OOkDnAXKi8bHYHwft1mWs"
                    mail:postfix:add_whitelist_host = "rna.nl"
                    mail:postfix:add_whitelist_domain = "nl"
Apr 7 18:28:22 rna.nl com.apple.SecurityServer[22]: Succeeded authorizing right 'system.privilege.admin' by client '/Applications/Server.app/Contents/ServerRoot/usr/libexec/ServerEventAgent' [147] for authorization created by '/Applications/Server.app/Contents/ServerRoot/usr/libexec/ServerEventAgent' [147] (2,0)
Apr 7 18:28:22 rna.nl com.apple.SecurityServer[22]: Succeeded authorizing right 'system.privilege.admin' by client '/Library/PrivilegedHelperTools/com.apple.serverd' [89] for authorization created by '/Applications/Server.app/Contents/ServerRoot/usr/libexec/ServerEventAgent' [147] (100000,0)
Apr 7 18:28:22 rna.nl serveradmin[5034]: servermgr_jabber[I]: Proxy65 config file successfully created.
Apr 7 18:28:22 rna.nl kdc[73]: AS-REQ [email protected] from 127.0.0.1:64299 for krbtgt/[email protected]
Apr 7 18:28:22 --- last message repeated 1 time ---
Apr 7 18:28:22 rna.nl kdc[73]: Client sent patypes: REQ-ENC-PA-REP
Apr 7 18:28:22 rna.nl kdc[73]: Need to use PA-ENC-TIMESTAMP/PA-PK-AS-REQ
Apr 7 18:28:22 rna.nl kdc[73]: AS-REQ [email protected] from 127.0.0.1:52730 for krbtgt/[email protected]
Apr 7 18:28:22 --- last message repeated 1 time ---
Apr 7 18:28:22 rna.nl kdc[73]: Client sent patypes: ENC-TS, REQ-ENC-PA-REP
Apr 7 18:28:22 rna.nl kdc[73]: Need to use PA-ENC-TIMESTAMP/PA-PK-AS-REQ
Apr 7 18:28:23 rna.nl servermgrd[1402]: servermgr_accounts: got error 5000 trying to auth to local LDAP node
Problem remains, but I wonder: can I remove the identities in Keychain that may be messing things up? And if so, which ones? Some are even duplicated in System and login key chain.
(never mind the weird whitelist domains Server creates, I'm managing that by hand anyway)

POSTING PREIOD 008/2011 NOT OPEN

Hie Mentors
Sorry to bother you all m new to the SD forum and someone will help with GR posting issue. Initally I had a he problem with Ides system and the error was POSTING PERIOD ONLY IN 5/2006 AND 4/2006. I managed to resolve it by doing the following , which was suggested by another member on the forum.
Enter T code SE16N.
Enter table name MARV. Press enter.
Enter your company code in the required field. Press enter.
Enter &SAP_EDIT in the place where you entered the T code. Press enter. Now it is in edit mode.
Execute (click on Clock icon). A new screen appears.
Enter The Current Year: Current Month: Year of the previous Month: Previous month: Last year: Last month of the calendar year. As asked in the screen.
Press enter. Save and come outside.
Please do remember all the time period should be as per your system calendar.
Now m kinda of stuck again in MIGO and the new error m getting is : POSTING PREIOD 008/2011 NOT OPEN . The following are my parameters in mmrv
current period    08/2011
previous p         07/2011
allow posting to previous period     yes
If I do MMPV and put 07/2011 or 08/2011
Result:
Log
period entered 08/2011
incorrect period in control rec of CoCD 1000 : no conversion
the current period (mon/year) of the control record is 08/2011
Edited by: bruno17 on Aug 14, 2011 9:50 PM

Hi
Thanks for all the help, I have done what you suggested on the requests and the system generated a request after inputting the description. I have to managed to save the changes and tried to post but m getting some runtime errors..I middle of rebooting my system. Yes its its my test system which m using for certification. The other problem I have is that my system is very slow and keep getting these runtime errors and have debugged bbut still keep coming up. The POSTING PERIOD 008/2011 NOT OPEN is nomore but m now getting runtime errors.. I ahve tried but run it a few times but the error keeps coming. I do not know whats wrong now.
The runtime Error
MESSAGE_TYPE_X
TRIGGER LOCATION OF RUNTIME ERROR
program     SAPLMBWL
Include       LMBWLU21
Row           59
Module Type FUNCTION
Module Name MB_POST_GOODS_MOVEMENT
ERROR ANALYSIS
NO RFC DESTINATION IS DEFINED FOR SAP GLOBAL TRADE SERVICES
MESSAGE CLASSE "/SAPSLL/PLUGINR3"
NUMBER                  002
I really dont know whats wrong now...
Anyway
Thanks

After changing my 1st cartridge Envy 5530 printer wants to realign and scan each time it's turned on

After changing my 1st cartridge Envy 5530 printer wants to realign and scan each time it's turned on. When I do this, it says "Scan not detcted." After a 2nd scan, it sets itself to default settings. Then I can use the printer. Is there a way to turn off alignment?
This question was solved.
View Solution.

You might try resetting the printer. It could clear your issue.
Steps
Press the Power button () to turn on the product.
With the product turned on, disconnect the power cord from the rear of the product.
Unplug the power cord from the wall outlet.
Wait at least 15 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the rear of the product.
If the product does not turn on by itself, press the Power button () to turn it on.
Hope that this helps.
---- If my answer was helpful please click the Kudos star.
If your problem is solved please click the Accept as Solution button so other forum users can use the solution.---->
(I am an HP employee) I am not a expert on all our products, but I'll do my best to help you.

Changes made in BOM are not reflected in Configurator.

Hi all,
When i update minimum and maximum quantities in BOM, the new values are not reflected in the configurator.
I have found a patch (patch# 4410573) for this issue in metalink and applying that patch did not resolve the issue.
I have logged an SR with Oracle for this and Oracle support have asked me to run "Refresh Single Configuration Model" concurrent program and see if the changes are reflected.
This program has 2 parameters one for folder and the other for Configuration Model Id.
When i try to run the program, for any of the folders, the value set for the parameter Configuration Model Id does not show any values and hence i am unable to run the program.
We don't have a separate instance for COnfigurator.
Do i need to do any set up so that my Configuration model is reflected in the LOV?
Can anyone please help me on this?
Oracle Apps version: 11.5.10.2
Configuration software build: 11.5.10.25.43A
Regards,
Sreekanth

Hi Jason,
Please see my comments below
Jason said*
Support is correct. If you haven't run the Refresh a Single Configuration Model concurrent program for your model, then the new BOM attributes will not be visible in your model. Changes to items/BOMs are not directly reflected in the configuration model. You must "refresh" the model to see the changes.*
Even without running the "Refresh a Single Configuration Model" concurrent program, in some scenarios, changes are being reflected in Configurator.
Ex:
When i change only minimum and maximum quantities, the changes i.e. new minimum and maximum values are not reflected in Configurator.
But, when i also change any of the following fields along with minimum and maximum quantities, new values are being updated in Configurator with out running the refresh program.
effectivity_date, disable_date, component_quantity, planning_factor, component_yield_factor and optional class
Can you please explain this?
Also, i have already tried executing the query by commenting the enclosing_folder check. But still, the query is not retrieving any records.
Basically, the sub-query that fetches devl_project_id itself is not retrieving any records.
Jason said:+
Based on the SQL above, the only criteria for importing a model is that the item under the folder must be:+
a. A Model (PRJ = Project)+
b. The Model cannot be deleted (Deleted_flag must be '0')+
c. And the model must have been imported from Oracle apps, e.g. it cannot be a non-BOM model (orig_sys_ref is not null)+
Can you please tell how can i check whether model is imported into configurator or not and if it is imported from where is it imported?
Regards,
Sreekanth
Edited by: Sreekanth Munagala on May 12, 2011 8:52 AM

Transfer Lion (I bought on App Store) to a newer Mac Mini (July 2011)?

I just purchased a new "July 2011 Mac Mini" on ebay. Can I transfer the Lion (I bought on App Store) off of my older Mac Mini to the new Mini? I purchased Lion the day it came out from the App Store and had it downloaded on my 2 GHz Intel Core 2 Duo Mini. I'd like to not have to pay for Lion again. Thank you for your input.

had it downloaded on my 2 GHz Intel Core 2 Duo Mini.
You don't have to re purchase Lion.
Just re download to the other Mac using the same Apple ID.
Downloading past purchases from the App Store, iBookstore, and iTunes Store

FUTA Changes Effective 1st July 2011 - Not self Adjusting***Critical

Similar Messages

Maybe you are looking for