Future support of n1 system manager

Hello,
what about xvm ops center?
will there be future releases of n1 system mananger with support of newest Sun products, or will the support only be added to the xvm ops center? n1 is free, so i would like to use it, but not if its already dead.
thx
Benjamin

Hi Benjamin
Sun doesn't plan any new releases of N1SM, since xVMOC is the next SM release.
Support for N1SM however exists, alas if you want new features or new HW support you have to pay for its development.
In the usual support contract there are defect fixes included, however not new HW or features ...
hth
Lubos

Similar Messages

System Management Tools Support

Does Oracle Fusion Middleware support CA Spectrum for System Management?
Thanks in advance,
Aruna

Hi Aruna,
Please refer the link given below http://www.oracle.com/corporate/press/2005_sep/plug.html
Do lemme know if it was of any use to you.
Regards,
Sindhiya V.

ERROR MESSAGE sap system manager:work process restarted, session terminated

Hi,
i am a beginer in SAP administration, users are getting this error message and i have done all my research and not able to resolve this issue. Here are the details
SAP Version :ideas 4.7
Database :Oracle
OS : windows 2003
Module user is working on MM
user working on it is a Super user with all the permissions
SAP is configure to run under the European date and decimal format.
I have never done any database administration on it, it is a new install and has been rarely used.
User creates a RFQ and when he tries saving it , seems like for the first time after either restarting the macine or restarting the service it might work and at time it might not, this is a very sporadic error and most of the times it crashes out with the message "sap system manager:work process restarted, session terminated" and kicks the user out of the session.
Below are the details of the error message from ST22 :
name of the runtime error : system_core_dumped
below are the details of the error message and its resoltion as suggested by sap help :
========
Runtime Errors         SYSTEM_CORE_DUMPED
       Occurred on     01.02.2008 at 07:52:19
Process terminated by signal " ".
What happened?
The current ABAP program had to be terminated because the
ABAP processor detected an internal system error.
The current ABAP program "SAPLCLSC" had to be terminated because the ABAP
processor discovered an invalid system state.
What can you do?
                                                                                Make a note of the actions and input which caused the error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
An SAP System process was terminated by an operating system signal.
                                                                                Possible reasons for this are:
1. Internal SAP System error.
2. Process was terminated externally (by the system administrator).
           Last error logged in SAP kernel
                                                                                Component............ "Taskhandler"
Place................ "SAP-Server server1_DEV_00 on host server1 (wp 1)"
Version.............. 1
Error code........... 11
Error text........... "ThSigHandler: signal"
Description.......... " "
System call.......... " "
Module............... "thxxhead.c"
Line................. 9555
How to correct the error
The SAP System work directory (e.g. /usr/sap/c11/D00/work ) often
contains a file called 'core'.
Save this file under another name.
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
   To obtain this, select the "Print" function on the current screen.
                                                                                2. A suitable hardcopy prinout of the system log.
   To obtain this, call the system log with Transaction SM21
   and select the "Print" function to print out the relevant
   part.
3. If the programs are your own programs or modified SAP programs,
   supply the source code.
   To do this, you can either use the "PRINT" command in the editor or
   print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
   or which actions and input led to the error.
System environment
SAP Release.............. " "
Application server....... " "
Network address.......... " "
Operating system......... " "
Release.................. " "
Hardware type............ " "
Character length......... " " Bits
Pointer length........... " " Bits
Work process number...... " "
Short dump setting....... " "
Database server.......... " "
Database type............ " "
Database name............ " "
Database owner........... " "
Character set............ " "
SAP kernel............... " "
Created on............... " "
Created in............... " "
Database version......... " "
Patch level.............. " "
Patch text............... " "
Supported environment....
Database................. " "
SAP database version..... " "
Operating system......... " "
User, transaction...
Client.............. " "
User................ " "
Language key........ " "
Transaction......... "ME41 "
Program............. "SAPLCLSC"
Screen.............. "SAPMM06E 0320"
Screen line......... 71
Information on where termination occurred
The termination occurred in the ABAP program "SAPLCLSC" in "EXECUTE_SELECT".
The main program was "SAPMM06E ".
The termination occurred in line 131 of the source code of the (Include)
program "LCLSCF2G"
of the source code of program "LCLSCF2G" (when calling the editor 1310).
=============
i even tried increasing the dialog processes but with no use.The same error occurs.
I appreciate every one of help i can get, i am working on a deadline which is tomorrow evening to resovle this issue, any kind of help is highly appreciated.
thanks
mudessir.

Hi
   follow correction method suggested in this dump,
" The SAP System work directory (e.g. /usr/sap/c11/D00/work ) often
contains a file called 'core'. Save this file under another name."
have you done this?
with regards,
raj.
<i>pls, award points</i>

Support desk in solution manager 4.0,

Hi,
Trying to configure the support desk in solution manager 4.0,Can anybody suggests which is the good document to start with.
Thanks & Regards,
Sreekala

Dear Dolores,
I got the following error, I have followed 691303. I have also checked the note 618280. but this error is not going.
Error in resolution of rule 'AC13200137' for step '1'
Message no. WL423
Diagnosis
The function module for rule 'AC13200137' initialized an exception and returned a message ("MESSAGE ... [RAISING ...]").
System Response
If the message is of type 'A', 'E' or ' ', the confirmation of the current work item is recorded and the work procedure set to error status.
In all other cases, the message is logged as a warning and the work procedure continues.
Pls help me ASAP
Regards
Sreekala

SLD - Logical System Management

Hi,
We are implementing XI and we have the problem with SLD logical system management. The problem is that we use the same Logical system name (Ex. PRDclnt350) for all the systems to avoid running lengthy BDLS process when we hook our R3 systems to their respective BW systems.
Can you please suggest how we take care of this in XI -SLD landscape as it requires unique logical system names for each Business System when maintaining in SLD.
Can we have multiple SLDs and will it take care of the issue. If so can we take one of them as the master SLD and the rest as slave SLDs. What would be the best practices for synchronizing them. Any help in this regard is greatly appreciated.
Thanks and regards..
Haritha

Hi All,
We opened an OSS note with SAP regarding this. Please see the question we asked and the response we got from them regarding the SLD maintenance:
Hi,
We are on BW 3.5 and SAP ERP 5.0. We are implementing XI now. So we
need to configure SLD and register our Business systems. The problem is
we have the concept of using the same logical system for all our SAP
systems, say WRPCLNT750, when we are hooking our systems to their
respective BW systems. And in SLD, we have problem becuase of this, as
it recommends to have unique logical system name for each Business
System being registered.
We want to mention some points in here about our landscape and some of
the recommendations we got from SAP regarding this. Ours is a very big
warehouse system and in order to avoid the lengthy "BDLS" runs, SAP
recommended using the same Logical System name for all the SAP systems.
Hence we are using the same logical system name for our systems.
So now coming to our problem, can you please tell us what would be the
best practice that needs to be followed now for SLD Business System
registration. How can we overcome the hurdle of NOT having a unique
logical system name for our systems in central System Landscape
Directory.
Please let us know the solution as early as possible.
Thanks and regards..
Haritha.
The Response:
Hello Haritha
I have found some pass cases with the same question that you have,
however, the replies from developer are as below.
Logical systems cannot be duplicated within the SLD, that means one
Business System per Logical System name, both need to be unique, the SLDis working a designed here.
I would suggest you rename one of the copies of the productive system
to solve this.
My apology that I couldn't provide you a better answer for this.
Thanks & Best Regards
Andy Lam
Active Global Support - SolMan & Technology
Kindly, please let me know your suggestions.
Thanks and regards..
Haritha.

N1 system manager installation faied (newer version of Java web console)

Hi,
I am trying to install Sun N1 system manager on Solaris x86 U3 + all patches. Once I run the installer I got:
N1SM Installer (version 1.3.2 on SunOS)
1. Install OS packages. [Completed]
2. Install Expect. [Completed]
3. Install IPMI tool. [Completed]
4. Install JDK 1.5. [Completed]
5. Install service provisioning components. [Completed]
6. Install OS provisioning components. [Completed]
7. Copy DHCP configuration file. [Completed]
8. Install user interface components. [Partially Run]
9. Install service container components. [Not Completed]
10. Install N1 System Manager. [Not Completed]
Failed Step: Install user interface components.
The following is a portion of the installer
log which may indicate the cause of the error.
If this does not indicate the cause of the
error, you will need to view the full log
file. More information on how to do that is
available below.
The Sun Java(TM) Web Console software already installed (version 3.0.2)
is newer than the version (3.0) you are attempting to install.
Downgrading is not supported. If you wish to run the older version,
you can install it after unintalling the currently installed version.
Error running lockhart setup: 1792
Please fix the problem and then try this step again.
For a full log of the failed install see the file: /var/tmp/installer.log.9327.
t. Try this step again (correct the failure before proceeding)
x. Exit
Enter selection: (t/x) x
Is there any way to continue my installation and using currently installed version of Java Web Console?

Tried removing the currently installed Java Web Console as described at http://docs.sun.com/app/docs/doc/817-1985/6mhm8o5l4?a=view
It says to simply run /usr/share/webconsole/bin/setup -u, however there is no setup binary in the listed dir.
# ls -l /usr/share/webconsole/bin/
total 396
-r-xr-xr-x 1 root sys 9995 Oct 9 08:18 smcwebserver
-r-xr-xr-x 1 root sys 6571 Oct 9 08:17 smloginmodule
-r-xr-xr-x 1 root sys 171907 Oct 9 08:17 smreg
-r-xr-xr-x 1 root sys 1456 Oct 9 08:17 smwebapp
-r-xr-xr-x 1 root sys 2917 Oct 9 08:17 wcadmin
# uname -a
SunOS host 5.10 Generic_118855-33 i86pc i386 i86pc
It seems the docs are wrong?

JMF error - Format of Stream not supported in RTP Session Manager

java.io.IOException: Format of Stream not supported in RTP Session Manager
at com.sun.media.datasink.rtp.Handler.open(Handler.java:139)
why this erro occors?
I already created the DataSink.
When I try to do this...
dsk.open(); //here the error got
dsk.start(); Code of server of media
I want to sent audio (wav) like a radio, but from file. Without stop to send streaming. PullBufered
*Class Server that you offers Streaming of midia
public class Servidor {
private MediaLocator ml;
private Processor pro;
private javax.media.protocol.DataSource ds;
private DataSink dsk;
private boolean codificado = false;
//start the server service, passing the adress of media
// ex: d:\music\music.wav
// pass the ip and port, to make a server works
public void iniciarServicoServidor(String end,String ip, int porta)
try {
//capture media
capturarMidia(end);
//creates processor
criarProcessor();
// configure the processor
configurarProcessor();
//setContent RAW
descreverConteudoEnviado();
//format the media in right RTP format
formatRTP();
//creat the streaming
criarStreaming();
//configure the server
configurarServidor(ip, porta);
//in this method raise the excepition
iniciarServidor();
//when I try to open the DataSink.open() raises the exception
//java.io.IOException: Format of Stream not supported in RTP Session //Manager
// at com.sun.media.datasink.rtp.Handler.open(Handler.java:139)
} catch (RuntimeException e) {
System.out.println("Houve um erro em iniciarServicoServidor");
e.printStackTrace();
public void capturarMidia(String endereco)
try {
System.out.println("**************************************************************");
System.out.println("Iniciando processo de servidor de multimidia em " + Calendar.getInstance().getTime().toString());
ml = new MediaLocator("file:///" + endereco);
System.out.println("Midia realizada com sucesso.");
System.out.println ("[" + "file:///" + endereco +"]");
} catch (RuntimeException e) {
System.out.println("Houve um erro em capturarMidia");
e.printStackTrace ();
public void criarProcessor()
try {
System.out.println("**************************************************************");
pro = Manager.createProcessor(ml);
System.out.println("Processor criado com sucesso.");
System.out.println("Midia com durcao:" + pro.getDuration().getSeconds());
} catch (NoProcessorException e) {
System.out.println("Houve um erro em criarProcessor");
e.printStackTrace();
} catch (IOException e) {
System.out.println ("Houve um erro em criarProcessor");
e.printStackTrace();
public void configurarProcessor()
try {
System.out.println("**************************************************************");
System.out.println("Processor em estado de configura��o.");
pro.configure();
System.out.println("Processor configurado.");
} catch (RuntimeException e) {
System.out.println("Houve um erro em configurarProcessor");
e.printStackTrace();
public void descreverConteudoEnviado()
try {
System.out.println("**************************************************************");
pro.setContentDescriptor(new ContentDescriptor(ContentDescriptor.RAW));
System.out.println("Descritor de conteudo:" + pro.getContentDescriptor().toString());
} catch (NotConfiguredError e) {
System.out.println("Houve um erro em descreverConteudoEnviado");
e.printStackTrace();
private Format checkForVideoSizes(Format original, Format supported) {
int width, height;
Dimension size = ((VideoFormat)original).getSize();
Format jpegFmt = new Format(VideoFormat.JPEG_RTP);
Format h263Fmt = new Format(VideoFormat.H263_RTP);
if (supported.matches(jpegFmt)) {
// For JPEG, make sure width and height are divisible by 8.
width = (size.width % 8 == 0 ? size.width :
(int)(size.width / 8) * 8);
height = (size.height % 8 == 0 ? size.height :
(int)(size.height / 8) * 8);
} else if (supported.matches(h263Fmt)) {
// For H.263, we only support some specific sizes.
if (size.width < 128) {
width = 128;
height = 96;
} else if ( size.width < 176) {
width = 176;
height = 144;
} else {
width = 352;
height = 288;
} else {
// We don't know this particular format. We'll just
// leave it alone then.
return supported;
return (new VideoFormat(null,
new Dimension(width, height),
Format.NOT_SPECIFIED ,
null,
Format.NOT_SPECIFIED)).intersects(supported);
public void formatRTP()
try {
// Program the tracks.
TrackControl tracks[] = pro.getTrackControls();
Format supported[];
Format chosen;
for (int i = 0; i < tracks.length; i++) {
Format format = tracks.getFormat();
if (tracks[i].isEnabled()) {
supported = tracks[i].getSupportedFormats();
// We've set the output content to the RAW_RTP.
// So all the supported formats should work with RTP.
// We'll just pick the first one.
if (supported.length > 0) {
if (supported[0] instanceof VideoFormat) {
// For video formats, we should double check the
// sizes since not all formats work in all sizes.
chosen = checkForVideoSizes(tracks[i].getFormat(),
supported[0]);
} else
chosen = supported[0];
tracks[i].setFormat(chosen);
System.err.println("Track " + i + " is set to transmit as:");
System.err.println(" " + chosen);
codificado = true;
} else
tracks[i].setEnabled(false);
} else
tracks[i].setEnabled(false);
} catch (RuntimeException e) {
// TODO Auto-generated catch block
e.printStackTrace();
public void tocar()
pro.start();
public void criarStreaming()
try {
System.out.println("**************************************************************");
if (codificado)
System.out.println("Midia codificada...");
System.out.println("Processor entra em estado de realize.");
pro.realize();
System.out.println("Processor realized.");
System.out.println("Adquirindo o streaming a ser enviado.");
ds = pro.getDataOutput();
System.out.println("Streaming adquirido pronto a ser enviado.");
} catch (NotRealizedError e) {
System.out.println("Houve um erro em criarStreaming");
System.out.println(e.getMessage());
e.printStackTrace();
catch (Exception e) {
System.out.println(e.getMessage());
public void configurarServidor(String ip, int porta)
System.out.println("**************************************************************");
String url = "rtp://" + ip + ":" + porta + "/audio/1";
System.out.println("Servidor ira atender em " + url);
MediaLocator mml = new MediaLocator(url);
System.out.println("Localizador de midia ja criado");
try {
System.out.println("Criando um DataSink a ser enviado.");
dsk = Manager.createDataSink(ds, mml);
System.out.println("DataSink criado.");
} catch (NoDataSinkException e) {
e.printStackTrace();
public void iniciarServidor()
try {
System.out.println("**************************************************************");
dsk.open();
System.out.println("Servidor ligado.");
dsk.start();
System.out.println("Servidor iniciado.");
} catch (SecurityException e) {
e.printStackTrace();
} catch (IOException e) {
e.printStackTrace();
Gives that output console.
All methods are executed but the last doesnt works.
The method that open the DataSink.
What can I do?
Iniciando processo de servidor de multimidia em Sun May 13 22:37:02 BRT 2007
Midia realizada com sucesso.
[file:///c:\radio.wav ]
Processor criado com sucesso.
Midia com durcao:9.223372036854776E9
Processor em estado de configura��o.
Processor configurado.
Descritor de conteudo:RAW
Midia codificada...
Processor entra em estado de realize.
Processor realized.
Adquirindo o streaming a ser enviado.
Streaming adquirido pronto a ser enviado.
Servidor ira atender em rtp://127.0.0.1:22000/audio/1
Localizador de midia ja criado
Criando um DataSink a ser enviado.
streams is [Lcom.sun.media.multiplexer.RawBufferMux$RawBufferSourceStream;@a0dcd9 : 1
sink: setOutputLocator rtp://127.0.0.1:22000/audio/1
DataSink criado.
Track 0 is set to transmit as:
unknown, 44100.0 Hz, 16-bit, Stereo, LittleEndian, Signed, 176400.0 frame rate, FrameSize=32 bits
java.io.IOException: Format of Stream not supported in RTP Session Manager
at com.sun.media.datasink.rtp.Handler.open(Handler.java:139)
at br.org.multimidiasi.motor.Servidor.iniciarServidor(Servidor.java:291)
at br.org.multimidiasi.motor.Servidor.iniciarServicoServidor(Servidor.java:43)
at br.org.multimidiasi.motor.ConsoleServidor.main(ConsoleServidor.java:30)
Since already thanks so much.
Exactally in this method raises erros.
Ive tried another formats (avi, mp3) but all with the same error, what I can do?
[code] public void iniciarServidor()
try {
System.out.println("**************************************************************");
dsk.open();
System.out.println("Servidor ligado.");
dsk.start();
System.out.println("Servidor iniciado.");
} catch (SecurityException e) {
e.printStackTrace();
} catch (IOException e) {
e.printStackTrace();
Track 0 is set to transmit as:
unknown, 44100.0 Hz, 16-bit, Stereo, LittleEndian, Signed, 176400.0 frame rate, FrameSize=32 bits
java.io.IOException: Format of Stream not supported in RTP Session Manager
at com.sun.media.datasink.rtp.Handler.open(Handler.java:139)
at br.org.multimidiasi.motor.Servidor.iniciarServidor(Servidor.java:291)
at br.org.multimidiasi.motor.Servidor.iniciarServicoServidor(Servidor.java:43)
at br.org.multimidiasi.motor.ConsoleServidor.main(ConsoleServidor.java:30)

unknown, 44100.0 Hz, 16-bit, Stereo,
LittleEndian, Signed, 176400.0 frame rate,
FrameSize=32 bits
java.io.IOException: Format of Stream not supported
in RTP Session Manager
The fact that it doesn't know what the format is
might have to do with the problem. I've had similar
problems, and I've traced it back to missing jars and
codecs. Have you tried running the same code locally
without the transmission to see if you player will
even play the file?Already and it works, I used Player to play it and play normally, I try to make it with the diferents codecs of audio and video, but no sucess.

Error submitting a support message to Solution Manager

I get an error when try to submitting a message to solution manager via portal. Can anyone explain why this error occur.
An exception occurred while processing a request for :
iView : pcd:portal_content/com.bc.SuperRoles/com.bc.role.solutionmanager/com.bc.rolefolder/com.bc.iview.solman
Component Name : com.sap.portal.epsolman.EPSolman
The exception was logged. Inform your system administrator..
Exception id: 12:56_22/03/05_0012
See the details for the exception ID in the log file

Hi Ramesh. We are facing the same problems at a customer. Did you ever get an answer to your problem:
Error submitting a support message to Solution Manager
Posted: Mar 22, 2005 1:59 PM Reply E-mail this post
I get an error when try to submitting a message to solution manager via portal. Can anyone explain why this error occur.
An exception occurred while processing a request for :
iView : pcd:portal_content/com.bc.SuperRoles/com.bc.role.solutionmanager/com.bc.rolefolder/com.bc.iview.solman
Component Name : com.sap.portal.epsolman.EPSolman
The exception was logged. Inform your system administrator..
Exception id: 12:56_22/03/05_0012
See the details for the exception ID in the log file
Kind regards Thomas

Ask the Expert: C-Series Integration with Cisco Unified Computing System Manager

Welcome to the Cisco Support Community Ask the Expert conversation. This conversation is an opportunity to learn and ask questions about Cisco C-Series Integration with Cisco Unified Computing System® Manager (Cisco UCS® Manager) with Cisco experts Vishal Mehta and Manuel Velasco.
Cisco UCS C-Series Rack-Mount Servers are managed by the built-in standalone software, Cisco Integrated Management Controller (Cisco IMC). When a C-Series rack-mount server is integrated with Cisco UCS Manager, the IMC no longer manages the server. Instead you will manage the server using the Cisco UCS Manager GUI or Cisco UCS Manager command-line interface (CLI).
Cisco UCS Manager 2.2 provides three connectivity modes for Cisco UCS C-Series Rack-Mount Server management. The following are the connectivity modes:
Dual-wire management (shared LAN On Motherboard [LOM]): Shared LOM ports on the rack server are used exclusively for carrying management traffic.A separate cable connected to one of the ports on the Payment Card Industry Express (PCIe) card carries the data traffic.
SingleConnect (Sideband): Using Network Controller Sideband Interface (NC-SI), the Cisco UCS Virtual Interface Card 1225 (VIC1225) connects one cable that can carry both data and management traffic.
Direct Connect Mode: Cisco UCS Manager Version 2.2 introduces an additional rack server management mode using direct connection to the Fabric Interconnect.
Vishal Mehta is a customer support engineer for Cisco’s Data Center Server Virtualization Technical Assistance Center (TAC) team based in San Jose, California. He has been working in the TAC for the past 3 years with a primary focus on data center technologies such as Cisco Nexus® 5000, Cisco UCS, Cisco Nexus 1000V, and virtualization. He presented at Cisco Live in Orlando 2013 and will present at Cisco Live Milan 2014 (BRKCOM-3003, BRKDCT-3444, and LABDCT-2333). He holds a master’s degree from Rutgers University in electrical and computer engineering and has CCIE® certification (number 37139) in routing and switching and service provider.
Manuel Velasco is a customer support engineer for Cisco’s Data Center Server Virtualization TAC team based in San Jose, California. He has been working in the TAC for the past 3 years with a primary focus on data center technologies such as Cisco UCS, Cisco Nexus 1000V, and virtualization. Manuel holds a master’s degree in electrical engineering from California Polytechnic State University (Cal Poly) and CCNA® and VMware VCP certifications. Remember to use the rating system to let Vishal and Manuel know if you have received an adequate response.
Because of the volume expected during this event, our experts might not be able to answer every question. Remember that you can continue the conversation in the Data Center, under subcommunity, Unified Computing, shortly after the event. This event lasts through May 23, 2014. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.

Hello Sebastian,
The different modes of connecting C-Series with UCSM come into play depending on the type of infrastructure you already have along with C-Series and NIC model.
Cisco UCS C-Series Rack-Mount Servers are managed by the built-in standalone software, Cisco Integrated Management Controller (CIMC) .
Powerful features provided by Cisco UCS Manager can be leveraged to manage C-Series server by integrating C-Series Rack-Mount Server with UCSM.
This not only gives you rich-feature set but also one management plane to operate UCS-B Series Chassis and UCS-C Series Rack Server.
You will manage the server using the Cisco UCS Manager GUI or Cisco UCS Manager CLI.
Cisco UCS Manager 2.2 provides three connectivity modes for Cisco UCS C-Series Rack-Mount Server management.
The following are the connectivity modes:
• Dual-wire Management (Shared LOM):
Shared LAN on Motherboard (LOM) ports on the rack server are used exclusively for carrying management traffic. A separate cable connected to one of the ports on the PCIe card carries the data traffic. Using two separate cables for managing data traffic and management traffic is also referred to as dual-wire management.
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c-series_integration/ucsm2-2/b_C-Series-Integration_UCSM2-2/b_C-Series-Integration_UCSM2-2_chapter_0100.html
This mode is recommended when you have C-Server which does not have or cannot support VIC 1225 card (such C-200 server)
• SingleConnect (Sideband):
Using Network Controller Sideband Interface (NC-SI), Cisco UCS VIC1225 Virtual Interface Card (VIC) connects one cable that can carry both data traffic and management traffic.
This feature is referred to as SingleConnect.
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c-series_integration/ucsm2-2/b_C-Series-Integration_UCSM2-2/b_C-Series-Integration_UCSM2-2_chapter_011.html
This most recommended Integration model when using FEX and VIC 1225 card
• Direct Connect Mode:
Cisco UCS Manager release version 2.2 introduces an additional rack server management mode using direct connection to the Fabric Interconnect.
This mode will eliminate the need for FEX module as Servers are directly plugged into the base ports of Fabric Interconnect
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c-series_integration/ucsm2-2/b_C-Series-Integration_UCSM2-2/b_C-Series-Integration_UCSM2-2_chapter_0110.html
Please let us know if you need more information. Thank you!
Thanks,
Vishal

MSFT_ISCSITarget.Connect() Method is throwing System.Management.ManagementException "not found"

I am using c# wmi calls to connect to connect to ISCSI LUN through ISCSI initiator. I am using windows server 2012 r2. From server manager I am able to connect through ISCSI initiator. From GUI every thing is working fine. I am able to list ISCSISessions
through ISCSISession.GetInstances() in c# code. WmiExplorer is also showing that connect method is there. Generated class contains the connect() method.
System.Management.ManagementException was unhandled by user code
HResult=-2146233087
Message=Not found
Source=System.Management
StackTrace:
       at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
       at System.Management.ManagementObject.Initialize(Boolean getObject)
       at System.Management.ManagementObject.get_ClassPath()
       at System.Management.ManagementObject.GetMethodParameters(String methodName, ManagementBaseObject& inParameters, IWbemClassObjectFreeThreaded& inParametersClass, IWbemClassObjectFreeThreaded& outParametersClass)
       at System.Management.ManagementObject.GetMethodParameters(String methodName)
       at ROOT.MICROSOFT.WINDOWS.STORAGE.ISCSITarget.Connect(String AuthenticationType, String ChapSecret, String ChapUsername, String InitiatorInstanceName, String InitiatorPortalAddress, Boolean IsDataDigest, Boolean IsHeaderDigest,
Boolean IsMultipathEnabled, Boolean IsPersistent, String NodeAddress, Boolean ReportToPnP, String TargetPortalAddress, UInt16 TargetPortalPortNumber, ManagementBaseObject& CreatediSCSISession) at ROOT.Microsoft.Windows.Storage.MSFT_iSCSITarget.cs:line
402

Hi,
The issue is related to C# language, I suggest you ask for help from MSDN forum for better and accurate answer to the question.
http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=csharpgeneral
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

What is the advantages of CPI, compactCPI, and PXI, in requards to cost, future support, and avialibity of measurement cards.

We are currently supporting old stand alone test equipment that is coming to the limit of it's service life. We are operating under DOS and the current number of test are greater that 200, so changing to a complete new operating system is not an option. We are looking at CPI, cCPI, and PXI. It appears that any one of the three would work for us, but which would have the largest selection of measuremnet devices, lowest cost, and long term support? I will have to create a interface driver that will intercept the GPIB calls of the old software and port them to the new test equipment, which of the three would be the best for this. Th
e test stations with new equipment and the old equipment must function the same with only a change in the linking libraries.

mww-
As far as National Instruments is concerned, there isn't going to be much (if any) support under DOS for our PCI, cPCI, and PXI products. PCI and PXI (which is basically an extension of cPCI) are currently our primary platforms, and they will be supported well into the future under current operating systems like Windows 2000.
As far as cost goes, PCI and PXI are pretty comparable in most cases. You can get exact prices for different National Instruments' modules at http://www.ni.com/store
Trey Hamilton
Applications Engineer
National Instruments
http://www.ni.com/support

System management homepage

Hello, I am trying to inventory the HP System Management Homepage installed on our servers.Netbios_Name0 User_Name0 ProductName CompanyName ProductVersion
OPMGRRMS1 SYSTEM HP System Management Homepage Hewlett-Packard Development Company, L.P. 7.5.0
OPMGRRMS1 SYSTEM HP System Management Homepage for Microsoft® Windows NT(TM) Hewlett-Packard Company hpsmhd 7.5.0.4
OPMGRRMS1 SYSTEM HP System Management Homepage Service for Microsoft Windows (TM) Hewlett-Packard Company smhstart
SOPCIRIUS1 NULL HP System Management Homepage Hewlett-Packard Development Company, L.P. 7.5.0
SOPCIRIUS1 NULL HP System Management Homepage for Microsoft® Windows NT(TM) Hewlett-Packard Company hpsmhd 7.5.0.4
SOPCIRIUS1 NULL HP System Management Homepage for Windows x64 Package Hewlett-Packard Development Company, L.P. 7.1.0.17
SOPCIRIUS1 NULL HP System Management Homepage Service for Microsoft Windows (TM) Hewlett-Packard Company smhstart
SOPWEBHOST1 NULL HP System Management Homepage Hewlett-Packard Development Company, L.P. 7.5.0
SOPWEBHOST1 NULL HP System Management Homepage for Microsoft® Windows NT(TM) Hewlett-Packard Company hpsmhd 7.5.0.4
SOPWEBHOST1 NULL HP System Management Homepage for Windows x64 Package Hewlett-Packard Development Company, L.P. 7.4.2.4
SOPWEBHOST1 NULL HP System Management Homepage for Windows x64 Package Hewlett-Packard Development Company, L.P. 7.5.0.4
SOPWEBHOST1 NULL HP System Management Homepage for Windows x86 Package Hewlett-Packard Development Company, L.P. 7.5.0.4
SOPWEBHOST1 NULL HP System Management Homepage Service for Microsoft Windows (TM) Hewlett-Packard Company smhstart As you can see I have several Product Name, Company Name and also versions which appear on the machines...for example if I take the machine OPMGRRMS1 which version is running? 7.5.0? 7.5.0.4? why also I see smhstart as Product Version???I am not sure please could you clarify... As I see the product HP System Management Homepage in the software list as well as in the add/remove program which one is correct as they don't list the same version...Should I uninstall a version ? How to do it? from the registry? from Add/remove Program? using an MSI? Thanks,Dom

Hi:
You may also want to post your question on the HP Business Support Forum -- DL Servers section.
http://h30499.www3.hp.com/t5/ProLiant-Servers-ML-DL-SL/bd-p/itrc-264#.U1-wUulOW9I

NVIDIA nForce System Management Controller: Windows 7 driver?

I have a Fujitsu Siemens PC, Amilo Desktop Pi 3630 A, running Windows Vista Home Premium 32bit,
which I would like to update (preferably without reinstall) to Windows 7.
When I checked Fujitsu's website and also by mail contact, I only got the response
"Your system is not certified for Windows 7"!
So I ran "Microsoft Windows 7 Upgrade Advisor", which said that I can upgrade!
The only issue is that it requires an update to the driver for the
"NVIDIA nForce System Management Controller" [current version is 5.1.2600.158],
but Microsoft directs me to THIS site.
Here I search for a suitable driver for my motherboard, which according the tech spec's is
MB MS-7504PV (or MS-7504VP-PV) with chipset NVIDIA nForce 630i,
but no luck there. The MSI Live Update Online plug-in does not find anything on my Mainboard.
Over at NVIDIA's site I can find a driver for nForce 630i but only paired with GeForce 7xxx,
and I don't think I need a complete motherboard driver package.
Where can I find the correct driver?
Or do I dare try a Windows 7 update anyway?
What can go wrong?
PC: Fujitsu Siemens Amilo Desktop Pi 3630 A
CPU: Intel Core 2 Quad Q8200 2.33GHz
M-board: Fujitsu Siemens / MSI MB MS-7504PV, muATX, v1.1, Socket 775
Chipset: NVIDIA nForce 630i MCP73PV
BIOS: AMI v3.0S
Video: NVIDIA GeForce 9600 GT
LAN: nForce Realtek RTL8211
OS: Windows Vista Home Premium 32bit

You do not have an MSI Retail Product but a mainboard produced exclusively for the OEM Market. Neither MSI nor this forum provides end-user support for OEM products. That is also why MSI Live Update does not find anything for this particular platform (OEM). You need to contact Fujitsu Siemens for assistance (and this include BIOS Updates and drivers).
__TOPIC LOCKED__

Shared variables missing in distributed system manager

I have multiple shared variables in a library (.lvlib). These are all network-published shared variables. I can see the library in Distributed System Manager but not the variables in the library. When I look at the properties page in Share Variables Properties Dialog, aliasing is not enabled because the library is hosted on the same machine as the application.
I tried to run the Shared Variable Monitor application but was given a Runtime Error for TagMonitor.exe; "This application requested Runtime termination in an unusual way. Contact application support team."
I also tried undeploying and deploying the library as suggesting by KB 56PCQ3RR.
Why does Distributed System Manager see the shared variable library but not the shared variables in it?

Hello faustina,
Has there been any software or hardware changes on the application since the error occurred? Also I would recommend to format and reinstall the software on your Real-Time target, after this you can follow Matt’s recommendation to test this behavior with a new project and single shared variable.
Regards
Jose R

Satellite R830-143 - BIOS update does not support this operating system

Hi,
I received a notification via Tempro that a BIOS upgrade was available. I downloaded the ZIP file (bios-20120209125153.zip), extracted the package (BIOS360_EC140_WIN.exe) and ran it according to the instructions.
The package runs, gives the "Extracting files..." progress bar then displays a dialogue entitled "TOSHIBA BIOS Package Ver.4.1.2" that says: "This BIOS package does not support this operating system."
I am running Windows 7 Home Premium 64-bit on a Satellite 830R-143 with the short part no. PT32LE
Does anyone know what the problem is?
Thanks in advance for your help...

Notebok Satellite R830-14U (part ? PT32LE) with BIOS 2.70 & EC 1.10
after upgrade Intel Management Engine Interface v.7.1.52.1176 i can not update BIOS - error "This computer is not supported"
http://ru.computers.toshiba-europe.com/innovation/dodriverLanguage=42
The ME Interface provides thermal management for Intel Mainboards. The Intel Management Engine Interface (Intel ME Interface) is the interface between the Intel Management Engine firmware and the host. Drivers and applications on the host that wish to interact with Intel Management Engine through host interface would use the Intel ME Interface host windows driver.
Model: Tecra R850, Portege R830, Satellite Z830, Qosmio F750, Portege Z830, Satellite Pro S750, Tecra R840, Satellite R830, Satellite Pro R850, Satellite R850
Downgade Intel Management Engine Interface to 7.00.02.1164 and/or reinstall Value Update Pack (vap-2011-614162421.zip) does not solve the problem.
What else can I do to fix this problem?

Future support of n1 system manager

Similar Messages

Maybe you are looking for